34--(qty 1) Breakout Table

Amendment / Modification

This amendment provides a clarification to a contractor's question and extends the response date.

• Clarification on the "Breakout Table" requirement: It is confirmed to be a "ratchet type."

• Response date extended to 02/24/2026 at 1700.

• The deadline for offers has been extended to 02/24/2026 at 1700.

Amendment / Modification

• This amendment (0001) modifies solicitation 140G0326Q0046, originally dated 02/13/2026.

• The primary purpose is to replace the technical specifications sheet.

• A new document containing updated specifications and clauses is attached.

• Technical specifications sheet.

• Clauses related to the specifications.

• Bidders should refer to the newly attached document for the most current specifications and clauses when preparing their offers.

Solicitation / RFP / RFQ

The U.S. Geological Survey (USGS) Idaho National Laboratory Project Office (INLPO) requires the purchase of a hydraulic-powered breakout table to support drilling operations for groundwater monitoring wells. This equipment is essential for safely and efficiently assembling and disassembling hammer drilling components, which require significant torque.

• Hydraulic Breakout Table:
  • Maximum breakout torque: 80,000 ft-lbs
  • Maximum makeup torque: 60,000 ft-lbs
  • Capable of both makeup and breakout operations for threaded tool joints.
  • Compatible with tool outer diameters (OD) up to 12 inches.
  • Must operate using rig hydraulics (minimum 2 GPM flow).
  • Hydraulic pressure range: 0-20 MPa (approx. 0-3,000 psi).
  • Adjustable jaws or chain system for varying OD sizes.
  • Non-marking dies or protective inserts.
  • Capable of horizontal operation with overhead crane support.
  • Integrated forklift pockets and lifting eyes.
  • Safety features including emergency stop and lockout capability.
  • Torque monitoring system for QA documentation.
  • Heavy-duty steel frame with corrosion-resistant finish.

This document incorporates various FAR clauses and provisions, including those related to commercial items, representations and certifications, and sustainable products and services. Specific contract type, period of performance, and estimated value are not detailed in this attachment.

This document includes solicitation provisions such as FAR 52.212-1 (Instructions to Offerors - Commercial Items) and FAR 52.212-3 (Offeror Representations and Certifications - Commercial Products and Commercial Services). Offerors must complete these provisions, including electronic representations in SAM.gov. Specific submission instructions and evaluation criteria are not detailed within this document.

Various small business representations are included (e.g., Small Business Concern, Veteran-owned Small Business Concern, SDVOSB, SDB, WOSB, EDWOSB, HUBZone). Offerors must complete the relevant sections of FAR 52.212-3.

This document also incorporates clauses related to technical liaison, scientific integrity, electronic invoicing via IPP, prevention of malicious code, and unilateral de-obligation. A deviation for Sustainable Products and Services (FAR 52.223-23) is noted.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information. The U.S. Geological Survey (USGS) Idaho National Laboratory Project Office (INLPO) requires the purchase of a hydraulic-powered breakout table to support drilling and construction of groundwater monitoring wells. This equipment is needed for environmental monitoring and remediation efforts, specifically for constructing six monitoring wells.

• A hydraulic-powered breakout table compatible with the SD-300 rig's hydraulic system.

• Minimum breakout torque: 80,000 ft-lbs.

• Capable of both makeup and breakout operations for threaded tool joints.

• Compatible with tool outer diameters (OD) from 2-3/8 inches up to 20 inches.

• Must operate using rig hydraulics (minimum 2 GPM flow).

• Hydraulic pressure range: 0–20 MPa (approx. 0-3,000 psi).

• Equipped with pressure relief and safety valves.

• Adjustable jaws or chain system to accommodate varying OD sizes.

• Non-marking dies or protective inserts for sensitive tool surfaces.

• Capable of operating in horizontal position with overhead crane support.

• Integrated forklift pockets and lifting eyes for transport and installation.

• Safety Features: Emergency stop and lockout capability per OSHA/ANSI standards.

• Torque Control and Recording: Torque monitoring system for QA documentation.

• Construction and Durability: Heavy-duty steel frame suitable for industrial and field environments, with a corrosion-resistant finish for outdoor use.

• Contract type: Not explicitly stated, but implied to be for commercial items.

• Period of Performance: Delivery by 03/31/2026.

• Estimated Value: Not stated.

• Quotes must be submitted in U.S. Dollars, firm, fixed price, in accordance with attached documents.

• Evaluation will be based on the lowest-priced technically acceptable (LPTA) factors.

• Key Deadlines:

  • Close of business for quotation submission: 02/23/2026, 1700 PS.
  • Questions due: 02/17/2026, 1700 PD.

• This acquisition is set aside for small businesses only.

• Offerors must be registered and have an active registration in the System for Award Management (SAM) at the time of quote submission.

• Applicable NAICS code: 332999 (All Other Miscellaneous Fabricated Metal Product Manufacturing) with a size standard of 750.

• Brand new items only; used or refurbished items will not be accepted.

• Offerors must specify the country of manufacture.

• Offerors must fill out and return forms FAR 52.204-24 and FAR 52.204-26.

• The solicitation incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2025-06.

• All amendments must be signed and included with the quote.

• Submit Unique Entity Identification (UEI) number with quote.

Form / Attachment / Pricing Sheet

This document contains two FAR (Federal Acquisition Regulation) provisions: FAR 52.204-24 and FAR 52.204-26. These provisions require offerors to represent whether they provide or use "covered telecommunications equipment or services" as defined by the National Defense Authorization Act. This is a mandatory representation for certain government procurements.

• FAR 52.204-24: Requires offerors to represent if they will provide covered telecommunications equipment or services, and if they use covered telecommunications equipment or services. Specific disclosures are required if the offeror responds "will" or "does" to these representations.
• FAR 52.204-26: Requires offerors to represent if they do not provide covered telecommunications equipment or services as part of their offered products or services, and if they do not use covered telecommunications equipment or services. It also directs offerors to check the SAM.gov list of excluded parties.
• Definitions: Key terms like "covered telecommunications equipment or services" and "reasonable inquiry" are defined, referencing FAR 52.204-25.
• Prohibitions: Outlines prohibitions against procuring or obtaining equipment, systems, or services that use covered telecommunications equipment or services, with specific exceptions.

Bidders must carefully review these provisions and understand their obligations. Failure to complete these representations accurately or to provide required disclosures may impact their ability to be considered for an award. Offerors need to conduct a "reasonable inquiry" to determine their compliance. The document specifies the exact information required for disclosure if an offeror indicates they provide or use such equipment/services.