Reconfigure/Refurbish the Training Room and Office Building for USCG in Buchanan, TN

Statement of Work (SOW) / Performance Work Statement (PWS)

To reconfigure and refurbish the training room and office in Building 6395 at the United States Coast Guard Cutter Chippewa facility in Buchanan, TN.

• The project area is approximately 1100 sq. ft.

• Replace or repair damaged/loose insulation and vapor barrier.

• Install new 1/2 inch gypsum sheetrock wall covering, including taping, mudding, and finishing.

• Prep and paint the newly installed wall covering with two coats of paint.

• Install a new acoustic ceiling grid system with new rails and 2'x4' acoustic ceiling tiles.

• Install a "mounting plate" in the ceiling grid capable of supporting a 15 lb overhead projector.

• Properly suspend and support HVAC ducting, electrical, and other utilities above the new ceiling grid.

• Install new HVAC ducting and registers into the new acoustic ceiling grid.

• Install fifteen 2'x4' cool white LED panel lights and an appropriately sized breaker.

• Relocate the light switch for the new LED panel lights to the nearest adjacent wall.

• Install eight new electrical receptacles on walls with appropriately sized breakers.

• Install one new electrical outlet in the ceiling for an overhead projector.

• Install four ethernet data ports.

• Remove four existing windows on the exterior of the project area.

• Install four new vinyl replacement double-hung windows.

• Repair concrete and/or apply self-leveling underlayment to provide a suitable substrate for flooring after removing existing flooring materials.

• Install Luxury Vinyl Plank Flooring with underlayment throughout the space.

• Contractor is responsible for providing a dumpster and all cleanup of the project area, including dumpster removal.

• Contractor shall protect all equipment and merchandise in work locations.

• Work must comply with the most current edition of the National Electric Code.

• Contractor must provide a Construction Progress Schedule including major milestones and events.

• Submittals will be reviewed by the Coast Guard and returned within 10 working days.

• The work is located at: U.S. Coast Guard Cutter Chippewa, 700 Coast Guard Road, Buchanan, TN 38222.

• The total contract performance period is 30 calendar days.

• Normal working hours are Monday through Friday, 7:00 am to 4:00 pm, unless otherwise approved.

• Contractor must be licensed in the state of Tennessee with certifications for all work requirements.

• Contractor is responsible for disposing of existing materials and any waste generated.

• Contractor must protect existing structures, utilities, work, and vegetation; any damage will be repaired at the contractor's expense.

• Comply with all hot work requirements of the Coast Guard unit.

• Coordinate staging and laydown areas with the Coast Guard.

• Contractor and subcontractor personnel must wear company identification at all times.

• Utilities (electricity and potable water) will be made available without charge, but the contractor is responsible for connection costs.

• Contractor shall provide temporary toilet facilities.

• Physically verify the location and elevation of underground and concealed utilities.

• Do not interrupt utilities until authorized by the Contracting Officer's Representative (COR).

• Work must be performed on an operational military installation; personnel must obey station regulations.

• Isolate construction areas with temporary partitions and dust controls.

• Provide movable high-visibility safety fencing and temporary covers on excavations.

• Contractor shall keep the work area and laydown/storage area clean daily.

• Comply with all applicable federal, state, and local laws and regulations for environmental protection.

• Submit a list of all personnel working on the project site prior to the preconstruction conference.

• All approved personnel must carry valid, Government-issued identification.

• Submit a written request for final acceptance electronically.

• Endorse all warranties or guarantees to the Government.

• Submit product data sheets for each manufactured item.

• Submit electronically Operation and Maintenance Manuals, including contact information, warranty, test procedures, performance data, start-up/operation/shutdown instructions, installation/maintenance/operating instructions, and parts list.

Other / Unclassified

This document is a General Decision Number (TN20260163) issued by the U.S. Department of Labor, Wage and Hour Division, detailing prevailing wage rates for building construction projects in Henderson and Henry Counties, Tennessee. It specifies rates for various trades including Electrician, Power Equipment Operator, Sheet Metal Worker, Carpenter, Cement Mason/Concrete Finisher, Glazier, Ironworker, Laborer, Painter, and Plumber. The document also includes information on Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) as they apply to federal contractors.

This document is crucial for bidders on federal construction projects in the specified counties. It establishes the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on the project. Bidders must use this information to accurately estimate labor costs for their proposals and ensure compliance with federal labor laws. The document also outlines the process for appealing wage determinations.

Solicitation / RFP / RFQ

This solicitation is for the reconfiguration and refurbishment of a training room and office located in Building 6395 at USCG Cutter Chippewa moorings, 700 Coast Guard Road, Buchanan, TN. The U.S. Coast Guard is seeking qualified individuals or firms to perform this work.

• Reconfigure and refurbish a training room and office.

• Work must be completed in accordance with the provided Scope of Work (SOW), which includes details and photos of the requirements.

• This will be a firm-fixed-priced purchase order.

• The contract performance period is 14 calendar days from notice to proceed and must be completed within 60 calendar days after receiving award.

• The evaluation factors for the offer are: Price, Technical Acceptability, and Past Performance.

• Offerors must provide their price, technical approach, and past performance with their quote.

• Quotes must be submitted to Joel.S.Ivy@uscg.mil by the date and time specified in the solicitation.

• This opportunity is set aside 100% for small business.

• All contractors must be actively registered in SAM.gov.

• It is mandatory for potential bidders to examine the Scope of Work (SOW) before submitting a quote.

• Performance and Payment Bonds are not required for this solicitation.

Forms / Attachments / Pricing Sheets

This document lists and describes various contract clauses that are incorporated by reference or in full text into a contract. It serves as a reference for bidders to understand the legal and regulatory requirements that will govern the contract.

• Clauses Incorporated by Reference: A comprehensive list of FAR (Federal Acquisition Regulation) and agency-specific clauses, identified by article number and reference text. These clauses cover a wide range of topics including inspection, suspension of work, contingent fees, anti-kickback procedures, personal identity verification, system for award management, commercial products and services, small business set-asides, wage rate requirements, withholding of funds, payrolls, apprentices, combating trafficking in persons, employment eligibility verification, minimum wages, paid sick leave, text messaging while driving, patent indemnity, insurance, federal, state, and local taxes, payments, assignment of claims, prompt payment, unenforceability of unauthorized obligations, accelerated payments to subcontractors, protests, applicable law for breach of contract, material and workmanship, superintendence, permits and responsibilities, other contracts, protection of vegetation, operations and storage areas, use and possession prior to completion, cleaning up, accident prevention, utility services, layout of work, specifications and drawings, preconstruction conference, prohibition on unmanned aircraft systems, default, accident and fire reporting, and insurance.
• Clauses Incorporated by Full Text: Specific clauses detailed in full, including "COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK" and "CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS." These clauses provide more detailed requirements and obligations.
• Specific Prohibitions and Representations: Several clauses address specific prohibitions, such as "PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED ENTITIES" and "PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT." These require specific representations from offerors.
• Buy American Statute: The "BUY AMERICAN-CONSTRUCTION MATERIALS" clause outlines requirements and preferences for domestic construction materials.
• Small Business Program Representations: Clauses related to small business programs, including definitions and eligibility criteria for various categories of small businesses.
• Site Visit Information: Details regarding site visits, including relevant clauses and contact information for arranging a visit.

This document is critical for bidders as it defines the legal framework and specific requirements of the contract. Understanding these clauses is essential for accurately preparing proposals, assessing risks, ensuring compliance, and determining eligibility. Bidders must pay close attention to clauses related to:

• Performance Requirements: Commencement, prosecution, and completion of work, site conditions, and performance standards.
• Compliance and Prohibitions: Restrictions on certain technologies (e.g., Kaspersky, telecommunications equipment), labor standards, and ethical conduct.
• Financial and Payment Terms: Clauses related to payments, taxes, and claims.
• Small Business Participation: Requirements and opportunities related to small business set-asides.
• Material Sourcing: Buy American Act requirements for construction materials.
• Representations and Certifications: Specific representations required regarding various aspects of the contract and the offeror's business.