66--Remote Control Systems for ADCP's IAW Salients FY25 REQ# 15680 SPECIAL ORDER # S25092

Form / Attachment / Pricing Sheet

This document, titled "FISMA 18-Point Checklist – IT Security Guidelines," outlines specific IT security requirements and guidelines that contractors must adhere to when performing work for the U.S. Geological Survey (USGS). It serves as a checklist to ensure compliance with various security standards and clauses.

• Background Investigations: Requirement for contractor personnel to undergo background checks.
• Non-disclosure Agreements: Mandates signing NDAs and system security agreements.
• Privacy Act: Addresses requirements for handling personal information protected by the Privacy Act.
• Training: Contractor employees must complete DOI's end-user computer security awareness training.
• Personnel Changes: Notification requirements for employee reassignments or departures.
• Contractor Location: Restrictions on performing services outside the United States.
• Applicable Standards: Adherence to DOI System Development Life Cycle (SDLC), NIST SP 800-64, and DOI SDLC Security Integration Guide.
• Asset Valuation-Security Categorization: Requirements for determining information types and security categorization.
• Property Rights: Outlines government rights in software acquired.
• Independent Verification and Validation (IV&V): Specifies responsibilities for software verification and validation.
• Certification & Accreditation (C&A): Details C&A requirements for applications and systems.
• Internet Logon Banner: Mandates the use of a USGS-approved logon banner.
• Incident Reporting: Contractor obligation to report computer security incidents.
• Quality Control: Requirements for software and hardware to be free of malicious code.
• Self-Assessment: Annual self-assessment requirement for contractors.
• Vulnerability Analysis: Outlines government responsibility for vulnerability analysis.
• Security Controls: Compliance with NIST SP 800-53, Rev.1, and FIPS 199/NIST SP 800-60.
• Contingency Plan: Requirement for IT Support Services to submit a contingency plan.

This document is critical for bidders to understand the comprehensive IT security obligations associated with the contract. It details mandatory compliance measures, training, data handling protocols, and reporting requirements that will impact how work is performed and systems are managed. Bidders must review these requirements to assess their ability to meet them and to accurately factor them into their proposals.

Form / Attachment / Pricing Sheet

This document outlines the "Electronic Software ICT Accessibility Requirements Statement per the Revised Section 508 of the Rehabilitation Act." It serves as a reference for ensuring that software procured or developed meets specific accessibility standards.

• Technical Criteria for Software (E207): Requires conformance to WCAG 2.0 Level A and AA Success Criteria for user interface components and content. Includes specific word substitutions for non-web software.
• Technical Criteria for Electronic Content (E205): Details accessibility requirements for non-public facing official business communications, referencing WCAG 2.0 standards and including specific word substitutions for non-web documents.
• Software Interoperability and Features (E502): Mandates that software interoperate with assistive technology and conform to specific accessibility features, including documented features and non-disruption of platform accessibility.
• Programmatic Determinability: Specifies requirements for object information, modification of object information, data tables, values, label relationships, hierarchical relationships, text, and focus cursor to be programmatically determinable.
• User Preferences: Requires applications to permit user preferences for color, contrast, font type, font size, and focus cursor.

This document is crucial for bidders developing or providing software. It defines the mandatory accessibility standards (based on Section 508 and WCAG 2.0) that software must meet. Bidders should carefully review these requirements to ensure their proposals and solutions comply with accessibility mandates, which may impact design, development, testing, and overall cost.

Form / Attachment / Pricing Sheet

This document outlines the "Salient Characteristics" for remote control systems for Acoustic Doppler Current Profilers (ADCPs). It details the specific requirements for two types of conversion kits: one for Teledyne RD Instruments RiverRay/RiverPro ADCPs and another for Teledyne RD Instruments StreamPro ADCPs.

For RiverRay/RiverPro ADCPs (Items 1-9):

• Converts ADCP flotation devices into a remote-controlled unmanned surface vehicle (USV).
• Must be compatible with River Ray/RiverPro ADCPs.
• Includes propulsion system, communication/power module, hand-held remote with display and joystick, rechargeable batteries/chargers, mounting hardware, and cabling.
• Required operating speeds: maximum at least 9.5 ft/sec, cruise at least 4.5 ft/sec.
• 2.4 GHz transmitter with at least 300 ft range.
• Minimum 1.5 hours of continuous run-time on battery power.
• No special tools or modifications to the ADCP float required for assembly.
• Must include a ruggedized, shockproof transport case.

For StreamPro ADCPs (Items 10-18):

• Converts ADCP flotation devices into a remote-controlled unmanned surface vehicle (USV).
• Must be compatible with StreamPro ADCP.
• Includes propulsion system, communication/power module, hand-held remote with display and joystick, rechargeable batteries/chargers, mounting hardware, and cabling.
• Required operating speeds: maximum at least 5.0 ft/sec, cruise at least 3 ft/sec.
• 2.4 GHz transmitter with at least 300 ft range.
• Minimum 1.5 hours of continuous run-time on battery power.
• No special tools or modifications to the ADCP float required for assembly.
• Must include a ruggedized, shockproof transport case.

This document defines the technical specifications and performance requirements for the remote control systems. Bidders must ensure their proposed solutions meet all listed salient characteristics to be considered compliant with the solicitation's requirements.

Solicitation / RFP / RFQ

This document is a solicitation (RFQ) for commercial items, specifically "Stork, SRS-RP/RR Remote Control Kit for Teledyne RDI River Pro/River Ray ADCP" and "Stork, SRS-S Remote Control Kit for Teledyne RDI Streampro ADCP". The solicitation is issued by the USGS OAG Reston Acquisition Branch.

• The primary deliverable is the "Stork, SRS-RP/RR Remote Control Kit for Teledyne RDI River Pro/River Ray ADCP" and "Stork, SRS-S Remote Control Kit for Teledyne RDI Streampro ADCP".

• Delivery is required within 30 days after receipt of order.

• Offerors are instructed to "PLEASE PROVIDE SPECIFICATIONS OF THE ITEMS YOU ARE QUOTING WITH YOUR SUBMISSION".

• The solicitation number is 140G012600011.

• The NAICS code is 334511 with a size standard of 1350 employees.

• The contract type is not explicitly stated, but it is an RFQ for commercial items.

• Offer Due Date: December 15, 2025, at 11:00 AM Eastern Standard Time.

• Offers must be submitted to the office specified in the solicitation.

• The document incorporates FAR clauses by reference, including 52.212-1 (Instructions to Offerors), 52.212-2 (Evaluation), and 52.212-3 (Offeror Representations and Certifications).

• Evaluation will be based on technical compliance and price.

• The acquisition is set aside for small businesses (indicated by the checked box for "SMALL BUSINESS" in block 10).

• For questions regarding this RFQ, contact Cynthia Nicanor at 703648 or cnicanor@usgs.gov.

• The document includes numerous FAR clauses and provisions incorporated by reference, covering various aspects of commercial item acquisitions, including system for award management, contract terms, supply chain security, brand name or equal, and evaluation criteria.