Repair of the Installation Boundary Fence at F7211, Vance AFB, Enid, Oklahoma

Other / Unclassified

This document is a U.S. Department of Labor Wage Determination (Revision No. 18, dated 12/03/2025) for the Service Contract Act, specifically for the state of Oklahoma, Area: Oklahoma County of Garfield. It lists various occupational codes and titles along with their corresponding minimum hourly wage rates and required fringe benefits.

This document is crucial for any bidder responding to a solicitation that falls under the Service Contract Act in the specified geographic area. It establishes the minimum wage and fringe benefit rates that must be paid to employees performing work on the contract. Bidders must ensure their proposed labor costs align with these determined rates to be compliant. The document also includes important notes regarding Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage), as well as details on vacation and holiday pay, and the process for conforming additional classifications if needed.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) details the requirements for repairing a section of the installation boundary fence at Vance Air Force Base, Oklahoma. The primary goal is to establish a continuous security barrier that matches the existing configuration and complies with relevant standards.

• Repair and Restoration: The project involves repairing and restoring the installation boundary fence.

• Demolition: Removal of damaged chain-link fence and gates, including posts, post-footings, barbed wire, tension wire, top rails, braces, and any other necessary appurtenances. Disposal of all unserviceable materials will be in accordance with environmental regulations.

• Materials: Includes furnishing and installing 4,000 linear feet of chain-link fence and two (2) double swing chain-link gates (6-foot wide x 20-feet long). The fence will include 9-gauge chain link fabric, tension wire, 3-strand barbed wire, galvanized metal posts, top rail, braces, and other necessary components.

• Concrete Work: Includes Portland Cement Concrete for mow strips and post footings, adhering to specified strength requirements.

• Electrical Grounding: Installation of a new, continuous grounding system along the entire fence line.

• Site Preparation & Cleanup: Clearing vegetation, debris, and obstructions; maintaining a 20-foot clear zone; grading disturbed earth; and site cleanup to preconstruction conditions or better.

• Protection of Government Property: Ensuring existing vegetation, structures, equipment, and utilities are protected from damage.

• Temporary Fencing: Provision of 4-foot-high heavy-duty plastic safety fence around the job site.

• Foreign Object Debris (FOD) Control: Compliance with FAA Advisory Circular No. 150/5210-24.

• Location: Vance Air Force Base, Oklahoma.

• Project Duration: 135 calendar days total, including up to 45 days for non-performance (mobilization and material lead time). The performance period for actual work is 90 calendar days after receiving a Notice to Proceed.

• Fence Height: Fabric must be stretched to a minimum height of 6 feet.

• Ground Clearance: Bottom of fence fabric must remain within 2 inches of firm ground or a concrete curb.

• Ground Resistance: Must not exceed 25 Ohms.

• Concrete Strength: Minimum 28-day compressive strength of 4500 PSI for mow strips and post footings.

• Curing: Minimum 7-day curing period for concrete before applying tension to cables and fabric.

• Compliance: Work must comply with Unified Facilities Criteria (UFC) 4-022-03 standards.

• Materials: All materials must meet the Buy American Act. Prohibited materials include those containing mercury, toluene, chlorinated solvents, etc. Lead and hexavalent chromium compounds are also prohibited.

• Contractor's Representative: A qualified Superintendent and Quality Control (QC) representative are required.

• Safety: Compliance with DAFMAN 91-203 and OSHA standards.

• Warranty: A standard 1-year warranty for all labor and material from the base's acceptance of completion.

• Submittals: Includes product data, shop drawings, material submittals, and bid form.

• Appendix A: Site Photos

• Appendix B: Bid Form

• Appendix C: Specifications (including Cast-in-Place Concrete and High Security Fences)

• Appendix D: Record Drawings

• Appendix E: Schedule E

Form / Attachment / Pricing Sheet

This document, titled "General Provisions and FAR Flowdown Provisions for Commercial Products and Commercial Services Under a U.S. Government Prime Contract (PR-TMP-11) (Rev 9.2) Effective 10/1/2025", outlines the terms and conditions that will govern a contract. It serves as a foundational document for the agreement between ASRC Federal Holding Company (BUYER) and a Seller.

Section I: General Provisions This section details 42 general provisions covering a wide range of contractual aspects, including:

• Formation of Contract and Terms and Conditions
• Applicable Laws (including Maryland law and UN Convention on Contracts for International Sale of Goods exclusion)
• Assignment and Subcontracting
• Changes to the contract scope, delivery, or services
• Commercial Computer Software rights and restrictions
• Communication protocols with the BUYER Customer
• Compliance with Laws (including specific US acts and regulations)
• Confidentiality of BUYER's and SELLER's information
• Contract Direction authority
• Default and Termination clauses
• Definitions of key terms (Contract, FAR, BUYER, SELLER, Work, etc.)
• Disputes resolution process
• Export Control compliance
• Force Majeure events
• Gratuities and Kickbacks prohibition
• Indemnification obligations
• Independent Contractor relationship
• Inspection and Acceptance procedures
• Insurance requirements
• Intellectual Property ownership and rights
• Language and Standards (English language, U.S. standard weights and measures)
• Limitation of Funds (for incrementally funded contracts)
• New Materials requirements
• Packing and Shipment standards
• Payments, Taxes, and Duties terms
• Precedence of contract documents
• Priority Rating for national defense use
• Quality Control System requirements
• Release of Information policies
• Severability of contract terms
• Stop Work Order procedures
• Survivability of certain clauses post-termination
• Termination for Convenience provisions
• Timely Performance expectations
• Use of Information by BUYER
• Waiver, Approval, and Remedies
• Warranty terms

Section II: FAR, DFARS, and Other Agency Flowdown Clauses This section incorporates various clauses from the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulation Supplement (DFARS), General Services Administration Acquisition Regulation (GSAR), Department of Homeland Security Acquisition Regulation (HSAR), Department of Energy Acquisition Regulation (DEAR), and Environmental Protection Agency Acquisition Regulation (EPAAR). These clauses are applied based on the contract's value, type of work, and specific requirements, and include provisions related to:

• Gratuities and Anti-Kickback Procedures
• Prohibition on certain foreign purchases and covered telecommunications equipment
• Service Contract Labor Standards
• Equal Employment Opportunity and Veteran Employment
• Contractor Code of Business Ethics and Conduct
• Restrictions on Subcontractor Sales to the Government
• Construction Wage Rate Requirements
• Export Control and Trade Agreements
• Rights in Technical Data and Commercial Computer Software
• Safeguarding of Covered Defense Information
• Cybersecurity requirements
• Hazardous Materials and Safety Precautions
• Restrictions on acquisition of specialty metals, supercomputers, and certain other items
• Buy American Act and Trade Agreements
• Government Property
• Whistleblower Protections
• Organizational Conflicts of Interest
• Sustainable Acquisition Program
• Scientific Integrity

This document is critical for any potential bidder as it defines the fundamental legal and contractual framework under which the work will be performed. It outlines the rights, responsibilities, and obligations of both the BUYER and the SELLER. Bidders must carefully review these provisions to understand:

• The governing laws and dispute resolution mechanisms.
• Requirements for compliance with various regulations and standards.
• Expectations regarding quality control, reporting, and communication.
• Terms related to payment, changes, termination, and warranties.
• Specific flowdown clauses from FAR, DFARS, GSAR, HSAR, DEAR, and EPAAR that may impose additional requirements based on the nature of the contract and its value.
• Intellectual property rights, confidentiality, and data security obligations.
• Insurance and indemnification requirements.

Understanding these provisions is essential for assessing the risks and requirements associated with the opportunity and for preparing a compliant proposal.

Questions & Answers / Clarifications

This document serves as a repository for questions submitted by potential bidders regarding the "FP1024596A Repair Boundary Fence" opportunity and the corresponding answers provided by the requester. It is intended to ensure all vendors have access to the same clarification information.

This section is currently empty. All submitted questions will be added to this document once received and reviewed by the requester. Once questions are answered, they will be posted by the indicated date.

No impact on the solicitation is noted at this time, as no questions have yet been answered or posted.

Form / Attachment / Pricing Sheet

This document is the "Annual Commercial Products & Services Representations and Certifications (PR-TMP-01) (Rev 10.0)" form, effective October 1, 2025. It requires offerors/sellers to complete specific representations and certifications. Failure to complete this form accurately may result in the rejection of bids or proposals as non-responsive.

• Acknowledgement: Offerors must sign to attest that the representations and certifications in Parts A and B are current, accurate, and complete, and agree to notify ASRC Federal of any changes.
• Electronic Signatures: Offerors must indicate if their organization permits electronic signatures.
• SAM Registration Option: Offerors can choose to use their completed SAM representations and certifications electronically (if updated within the last 12 months) or complete Parts A and B of this form.
• Part A (All Offerors): Requires information on the Offeror/Seller's legal entity, business address, contact information, DUNS/UEI/CAGE codes, tax ID, business size status, socio-economic category, and major supplies/services (NAICS codes). It also includes provisions related to FAR 52.204-10 regarding executive compensation reporting.
• Part B (If not registered in SAM): Includes certifications regarding payments to influence Federal transactions (FAR 52.203-11), covered telecommunications equipment or services (FAR 52.204-26), and debarment, suspension, or proposed debarment (FAR 52.209-5). It also includes specific clauses for Department of Defense contracts regarding ownership or control by terrorist countries (252.209-7001) and foreign governments (252.209-7002).

This form is critical for determining offeror eligibility. Bidders must complete it accurately to ensure their bid or proposal is considered responsive. It requires detailed business information, socio-economic status, and certifications related to compliance with various Federal regulations, including those concerning lobbying, telecommunications, and debarment. The option to use SAM-registered data is provided for convenience, but requires verification of currency and applicability.

Form / Attachment / Pricing Sheet

This document, "Vendor Authorization Request - Domestic Instructions," provides instructions for vendors submitting information to ASRC Federal and its subsidiaries for their Costpoint system. It details the requirements for providing Taxpayer Identification Numbers (TIN), contact information, and entity details. It also outlines the process for electronic payments and potential exemptions from backup withholding and FATCA reporting.

• Taxpayer Identification: Instructions for providing EIN, SSN, or ITIN, along with legal and business names.
• Contact Information: Requirements for legal and remittance addresses, contact name, phone, fax, and email.
• Entity Details: Selection of entity type, classification, business size, and business classifications (e.g., SBA certifications).
• Exemptions: Guidance on exemptions from backup withholding and FATCA reporting, including relevant codes.
• Electronic Payments: Information on enrollment with Corpay Payment Automation for electronic payments.
• Modification Form: Instructions for completing a "Modification to Existing Vendor Records" form for changes to addresses, contact information, or vendor/tax ID details.

This form is crucial for any vendor wishing to do business with ASRC Federal and its subsidiaries. It outlines the mandatory information required for vendor setup and payment processing. Bidders must accurately complete this form to ensure timely payments and compliance with ASRC Federal's vendor requirements. It also informs vendors about the electronic payment system and potential tax-related exemptions.