Rigging Services Blanket Purchase Agreement (BPA)

Form / Attachment / Pricing Sheet

This document provides instructions for a site visit related to the Rigging Services Blanket Purchase Agreement (BPA).

• Site Visit Details:
  • Time: 10:00 AM
  • Dates: January 26th (Landover) and January 28th (DCF)
• Requirements for Attendees:
  • Name and vehicle information must be provided to alert Security.
  • A Real ID is required to obtain a visitor's badge at the DCF.
  • Vendors must be on time and arrive early for check-in.
  • Only one representative per Offeror's company is allowed to attend.
• Contact Information:
  • POCs for issues: Chloe' Hunter / Tyron Johnson (Washington, DC, 202-435-8013) and Johnny Williams (Landover, Maryland, 202-874-0841).
  • Questions should be sent to Contracting Officer Marico Sellers at marico.sellers@bep.gov.

This document is critical for bidders intending to participate in the site visit. It outlines the necessary preparations, identification requirements, and scheduling to ensure smooth attendance and compliance with the opportunity's site visit procedures.

Form / Attachment / Pricing Sheet

This document is a Register of Wage Determinations under the Service Contract Act, issued by the U.S. Department of Labor. It provides the minimum wage rates and fringe benefits required for various occupations when performing contract work subject to the Service Contract Act in specific geographic areas.

• Geographic Area: District of Columbia Statewide, Maryland Counties of Charles and Prince George's, and Virginia Counties of Alexandria, Arlington, Fairfax, Falls Church, Fauquier, Loudoun, Manassas, Manassas Park, Prince William, and Stafford.
• Occupational Listings: Detailed lists of occupations with corresponding wage rates and footnotes.
• Fringe Benefits: Specifies that fringe benefits required follow the occupational listing.
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) for federal contractors.
• Conformance Process: Outlines the process for requesting additional classifications and wage rates if an occupation is not listed.

This document is crucial for bidders to understand the minimum labor costs associated with performing services under a contract in the specified geographic areas. Bidders must ensure their proposals account for these mandated wage rates and fringe benefits to comply with the Service Contract Act. Failure to adhere to these wage determinations can lead to contract violations and penalties.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial services to establish a single-award, firm-fixed-price Blanket Purchase Agreement (BPA) for Rigging Services. The BPA will be awarded to a single vendor and will have a five-year period of performance from April 1, 2026, through March 31, 2031. The government will place "calls" on an as-needed basis during this period, with pricing reviewed per call.

• The core requirement is for rigging services, including disassembly, relocation, demolition, removal, and disposal of printing equipment. The equipment to be handled weighs approximately 10-35 tons.

• Services may also include occasional relocation of similar equipment.

• The contractor shall provide all necessary personnel, equipment, supplies, facilities, transportation, tools, and materials.

• Services will be performed at the Washington D.C. facility and the Landover, Maryland warehouse.

• Contract Type: Firm Fixed Price Blanket Purchase Agreement (BPA)

• Period of Performance: Five years (April 1, 2026 - March 31, 2031)

• Estimated Value: Not explicitly stated, but pricing is reviewed on a per-call basis.

• Quotations are requested via email to the Contracting Officer, Marico Sellers (marico.sellers@bep.gov).

• Submission Deadline: February 26, 2026, no later than 12:00 PM EST.

• Offerors must hold prices firm for 90 days from the RFQ closing date.

• Quotes will be evaluated based on Technical Capability, Past Performance, and Price using a Lowest Price Technically Acceptable (LPTA) approach.

• Questions regarding the solicitation must be submitted in writing by February 4, 2026, 12:00 PM EST.

• Offerors must be registered in the System for Award Management (SAM).

• No specific set-aside is mentioned.

• This announcement constitutes the only solicitation; no separate written solicitation will be issued.

• An optional site visit is scheduled for January 26, 2026 (Washington, DC) and January 28, 2026 (Landover, MD).

• Proposals must be submitted in three separate volumes: Technical Capability, Past Performance, and Cost/Price.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide rigging services for the Bureau of Engraving and Printing (BEP) to facilitate the movement, relocation, demolition, removal, and disposal of large, heavy equipment.

• Disassembly and relocation of equipment weighing approximately 10-35 tons.

• Demolition, removal, and disposal of large, heavy equipment.

• Occasional relocation of similar equipment, materials, and components.

• Services are required at the Washington D.C. facility and the Landover, Maryland warehouse.

• Contractor shall load, transport, remove, deliver, and dispose of equipment as needed, adhering to applicable off-site scrap disposal requirements.

• Quality Control Plan (QCP) required within 30 days of award, detailing procedures for monitoring, discrepancy correction, root cause analysis, and trend analysis.

• Performance objectives include pre-inspection, rigging plan development (certified by a D.C. licensed Structural Engineer), equipment demolition/removal, and equipment disposal.

• Equipment movement must not result in damage or injury.

• Disposal plans must detail off-site facility use, proceeds distribution to BEP, and provide a receipt.

• Ordering period: April 1, 2026, to March 31, 2031.

• Locations: Washington DC Currency Facility and Landover, Maryland warehouse.

• Contractor is responsible for all personnel, equipment, supplies, transportation, tools, materials, and supervision, except for government-furnished items.

• Contractor personnel must have a standard non-disclosure agreement and maintain required security levels.

• Contractor personnel will be escorted on site.

• Contractor must safeguard government equipment, information, and property.

• Strict control procedures are required for sensitive and proprietary information.

• No supervision or control over contractor employees by the government.

• Contractor is responsible for utilities conservation.

• Applicable publications, including NFPA 80, must be followed.

• Deliverables include a Quality Control Plan, demolition plans, removal plans, and disposal plans/receipts.

Form / Attachment / Pricing Sheet

This document is Attachment 2, a pricing sheet for Rigging Services. Bidders should use this sheet to understand the pricing structure for the services required.

• The pricing sheet outlines line items for Rigging Services.
• Each line item specifies a Contract Type (FFP - Firm Fixed Price).
• It details the Supplies/Services as 'Non Personal Services' requiring the contractor to provide all necessary personnel, equipment, supplies, facilities, transportation, tools, materials, and supervision.
• The services are to be performed at the Washington D.C. facility and Landover Maryland warehouse.
• Quantities are listed in 'Ea.' (Each) for 8 visits per period.
• The sheet includes columns for Unit Price and Extended Price, which are to be completed by the bidder.
• The pricing structure covers a Base Period (01 April 2026 - 31 March 2027) and four Option Periods (01 April 2027 - 31 March 2031).

This pricing sheet is critical for bidders to prepare their proposals. It defines the unit of measure, the quantity of services expected per period, and the structure for submitting pricing for the base period and all option periods. Bidders must accurately fill in the Unit Price and Extended Price columns to comply with the solicitation's pricing requirements.