Riverside Day Use Area Rehabilitation

Statement of Work (SOW) / Performance Work Statement (PWS)

This project aims to repair several components at the Riverside Day Use Area, which was damaged by flood events in 2023 and 2017. The work includes the removal and replacement of a damaged wooden trail bridge, repair of a hand pump well, asphalt repairs, and construction of a stone-faced concrete retaining wall.

• Wooden Trail Bridge: Fabrication, delivery, and installation of a new wooden trail bridge.

• Trail Bridge Substructure & Retaining Wall Repair: Construction of a stone-faced, reinforced concrete retaining wall at the abutments and other eroded areas, replacing damaged gabion cells. This includes removal of debris.

• Asphalt Repair: Necessary repairs to existing asphalt surfaces on the trail, including patching defects and potholes, and replacing asphalt removed for access to abutments and retaining walls.

• Hand Pump Repair: Restoration of a well with a hand pump to operational status, including flushing, disinfection, and testing, adhering to all federal, state, and local drinking water requirements.

• Mobilization: Preparatory work and movement of personnel, equipment, and supplies to the project site, including selecting and submitting a staging plan.

• All work must be completed in accordance with attached project specifications, drawings, and best management practices.

• Materials for the hand pump well must be NSF/ANSI Standard 61 certified.

• No work is permitted in the overflow channel when water is present.

• Specific work restrictions apply to the overflow channel area during precipitation events.

• Location: Stanislaus National Forest, Riverside Day Use Area, Tuolumne, California.

• Period of Performance: 45 calendar days from the Notice to Proceed (NTP).

• Work Hours: 8 AM to 5 PM weekdays (non-holiday). No work on weekends or holidays without prior approval.

• Seasonal Restrictions: On-site work is not permitted from June 1 to September 30 to minimize conflict with public use.

• Contractor's License: Must hold a valid California contractor's license. Subcontractors must also hold a valid California license. A C-57 Well Drilling Contractor's license is required for the hand-pump well work.

• Key Personnel: Contractor must establish a Field Superintendent, Safety Manager, and Quality Control Manager.

• Submittals: A submittal register, material testing data, weigh/batch tickets, and documentation for hand pump well parts, chemicals, procedures, and testing are required. Submittals are to be sent via email to the Contracting Officer and COR, with a response within 10 business days.

• Environmental: Disposal of waste materials must be off National Forest land and comply with all laws. No sawdust or debris is to enter the waterway. No water is available at the project site. Construction must protect public and private property, employees, and forest resources.

Other / Unclassified

This document is a "General Decision Number" (CA20260018) issued by the U.S. Department of Labor, Wage and Hour Division, effective January 30, 2026. It establishes prevailing wage rates and fringe benefits for various construction trades (e.g., Asbestos Workers, Boilermakers, Bricklayers, Carpenters, Electricians, Ironworkers, Laborers, Painters, Plumbers, Roofers, Sheet Metal Workers, Sprinkler Fitters, Truck Drivers, Welders) across numerous counties in California.

This document is crucial for bidders as it outlines the minimum wage and fringe benefit rates that must be paid to laborers and mechanics employed on federal or federally funded construction projects in the specified geographic areas. Bidders must incorporate these prevailing wage rates into their cost proposals to ensure compliance with labor standards. Failure to adhere to these rates can lead to contract violations and penalties. The document details specific rates for various trades and their respective counties, along with any applicable premiums or footnotes related to working conditions or specialized tasks.

Form / Attachment / Pricing Sheet

This document is a Request for Information (RFI) Form used to submit inquiries regarding the solicitation "127EAW26Q0016 Riverside Day Use Area Rehabilitation" for the Stanislaus National Forest. Responses to RFIs will be provided in amendment format via SAM.gov.

• Submission Method: All RFIs must be submitted in writing using this editable form, sent ONLY to Tanya.Torres@usda.gov.
• Inquiry Format: Inquiries should be identified in numerical sequence.
• Prohibited Methods: Telephone requests will not be accepted or returned.
• Inquiry Categories: The form includes checkboxes to categorize questions regarding the solicitation/evaluation factors or the statement of work/technical data.
• Required Information: Bidders must provide Company Name and Offeror, the name of the person submitting the question, Date of Inquiry, and Phone Number.
• Proposal Inquiry Section: Space is provided to type out RFI #1, RFI #2, RFI #3, RFI #4, and additional RFIs as needed.

This form is essential for potential bidders who have questions about the solicitation or its associated technical documents. It outlines the specific process and required format for submitting these questions to the Contracting Officer. Failure to follow these instructions may result in inquiries not being addressed.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation (RFQ) for the Riverside Day Use Area Rehabilitation project at Stanislaus National Forest, California. The acquisition is a Total Small Business Set-Aside.

The project involves repairing multiple features at the Riverside Day Use Area, including:

• Removing and replacing a damaged wooden trail bridge.

• Repairing a hand pump well.

• Completing asphalt repairs.

• Fixing a stone-faced concrete retaining wall. The contract covers procuring, fabricating, delivering, and installing the new wooden bridge, along with other site improvements.

• Award Type: Firm Fixed Price.

• Estimated Project Magnitude: Between $25,000 and $100,000.

• Period of Performance: Work to commence within 10 calendar days after notice to proceed, with the entire work to be completed not later than 45 calendar days after notice to proceed.

• Quote Submission Deadline: March 27, 2026, at 11:00 AM Pacific Time, emailed to Tanya.Torres@usda.gov.

• Requests for Information (RFIs) Deadline: March 19, 2026, at 11:00 AM Pacific Time, emailed to Tanya.Torres@usda.gov.

• Evaluation Criteria: Quotes will be evaluated based on Technical Approach, Past Performance, and Price. Award will be made to the offeror representing the best value to the Government, not necessarily the lowest-priced offeror.

• Site Visit: An organized site visit is scheduled for Wednesday, March 18th at 1:00 PM (Local) at Riverside Day Use Area, Tuolumne, CA. Registration is required via email to Tanya.Torres@usda.gov.

• Set-Aside: Total Small Business Set-Aside.

• NAICS Code: 237310 – Highway, Street, and Bridge Construction.

• Small Business Size Standard: $45M.

• Offerors must have an active entity registration at SAM.gov.

• A bid guarantee is required for projects greater than $150,000.

• The document "Attachment 1 - Solicitation Terms and Conditions" contains details on applicable clauses, instructions, and evaluation criteria.

Form / Attachment / Pricing Sheet

This document, "ATTACHMENT 3. SCHEDULE OF ITEMS," provides a detailed breakdown of items for which pricing is required as part of a solicitation. Bidders must use this schedule to submit their pricing for the specified goods or services.

• Item Number: Unique identifier for each line item.

• Description: Details the specific item or service (e.g., Mobilization, Asphalt Concrete, Timber Trail Bridge).

• Pay Unit: The unit of measure for payment (e.g., Lump Sum, Ton).

• Est. QTY.: Estimated quantity required.

• Unit Price: Field for the bidder to enter their price per unit.

• Total Price: Field for the bidder to calculate the total price for the item.

• Quantities are estimates: Contractors must field verify quantities to meet all requirements of the drawings, Statement of Work, and Specifications.

• Pricing for all items is mandatory: One award will be made, and contractors must submit pricing for every item listed.

• Bid Bond/Guarantee: Required for proposals exceeding $150,000.00, in accordance with FAR 52.228-1.

• Bond Premium Payment: Payment for bond premiums is included in the contract price and not in addition to it.

• Required Information: Bidders must complete and include the following with their quote: Company Name, Company Address, UEI Number, POC Name and Title, Phone Number, Email, and Tax ID.

This document is critical for bidders to understand the specific items and services being procured and to accurately calculate and submit their pricing. Failure to complete this schedule correctly and provide all requested information may impact the bid's responsiveness and the ability to receive an award.

Other / Unclassified

This document is a "Fire Plan for Construction and Service Contracts" dated 08/02/2012. It outlines responsibilities and procedures for fire prevention and suppression activities within a contract area. It details contractor and Forest Service responsibilities, defines key terms related to logging and mechanical operations, and specifies required tools and equipment for fire safety.

This document is crucial for any bidder involved in construction or service contracts that may occur in areas prone to fire. It establishes mandatory fire prevention measures, equipment requirements (such as fire extinguishers, shovels, and water tanks), and operational restrictions based on Project Activity Levels (PAL). Bidders must understand these requirements to ensure compliance and safe operations, particularly during the Fire Precautionary Period (April 1 - December 1 in California). The plan also outlines reporting procedures for fires and specifies contact information for Forest Service personnel.

Solicitation / RFP / RFQ

This document appears to be a solicitation, likely for construction services related to the "Riverside Day Use Area Rehabilitation." It details various technical specifications, requirements, and procedures for the construction work.

• Scope of Work: Outlines the general scope, including excavation, embankment construction, aggregate courses, asphalt work, and structure removal.

• Materials: Specifies requirements for various materials such as untreated aggregate courses, minor crushed aggregate, asphalt prime and tack coats, cement, and rock (riprap).

• Construction Methods: Details specific methods for excavation, embankment construction, compaction, drainage features, and finishing.

• Survey and Staking: Includes detailed requirements for construction survey and staking, including tolerances for various phases.

• Quality Control: Mandates contractor quality control, including qualifications for personnel and procedures for testing and record-keeping.

• Erosion and Sediment Control: Requires a written plan for permanent and temporary erosion control measures.

• The document references various sections and subsections, indicating a comprehensive set of contract terms and conditions.

• It includes specific tables for construction tolerances and gradation requirements for materials.

• While specific submission instructions and evaluation criteria are not detailed in this excerpt, the document lays the groundwork for technical proposals by defining the scope and requirements.

• No specific set-aside information is present in this excerpt.

• The document extensively modifies and replaces existing sections, indicating it may be a revised solicitation or a detailed specification document.

• It references numerous standard test methods (e.g., AASHTO, ASTM) and FAR clauses.

Forms / Attachments / Pricing Sheets

This document contains a set of detailed engineering drawings and specifications for the "Riverside Day Use Area Rehabilitation" project. It serves as a comprehensive guide for contractors, outlining the specific requirements for various rehabilitation tasks.

• Index of Sheets (G-01): Provides an overview of all included drawings and their dates.
• Work Notes (G-02): Contains general notes, pay items with estimated quantities (Mobilization, Asphalt Concrete Patching, Timber Trail Bridge, Retaining Wall, Water System Repair), and references to applicable specifications (FP-14, FSORAG).
• Best Management Practices (BMPs) (G-03): Details environmental protection measures related to water quality, construction, parking, staging, and equipment refueling/servicing. It also includes specific guidance for aquatics, invasive plants, sensitive plants, soils, and hydrology.
• BMP Implementation Checklist (G-04): A form to track the implementation of Best Management Practices during the project.
• Site Map (G-05): Illustrates the project location and the areas for rehabilitation, including parking areas, restroom, beach area, handpump well, retaining wall, and trail bridge.
• Specific Rehabilitation Details:
  • Handpump Repair (C-01): Technical drawings and notes for repairing a specific handpump well.
  • Asphalt Repair Details (C-02): Details for asphalt concrete paving, including Type 1 and Type 2 full-depth patch details.
  • Retaining Wall Details (C-03): Drawings and specifications for rebuilding retaining walls, including different configurations for heights up to 4' and 4'-6'.
  • Trail Bridge Details (C-04, C-05, C-06, C-07): Comprehensive drawings and notes for constructing a trail bridge with a railing system, including stringer size requirements, deck and stringer details, bridge notes, bearing shoe details, and concrete sill anchor bolt details.

This document is critical for bidders as it defines the exact scope of work, technical specifications, materials, and environmental compliance requirements for the Riverside Day Use Area Rehabilitation project. It provides the necessary details to accurately estimate costs, plan execution, and ensure compliance with all project standards and regulations.

Form / Attachment / Pricing Sheet

This document is a supplemental specification (Section 557) detailing requirements for Timber Structures. It outlines the work, materials, construction methods, and workmanship for fabricating, treating, erecting, and painting structural timber, including lumber and hardware.

• Work Description: Fabrication, treatment, erection, and painting of structural timber.
• Materials: Specifies requirements for crushed aggregate, elastomeric bearings, geotextile, hardware, painting, structural excavation, glued laminated timber, treated structural timber & lumber, and untreated structural timber & lumber.
• Compliance Certificates: Requires verification for timber grading, preservative treatment (penetration and retention), and glued laminated members.
• Construction: Details excavation, storage of materials (treated and untreated), protection from elements, and specific methods for joining timber.
• Treating Timber: Outlines requirements for preservative treatment, including field treatment of cuts and abrasions, and compliance with AWPA standards.
• Untreated Timber: Specifies treatment for surfaces in contact with earth or subject to moisture.
• Workmanship: Defines standards for joints, fasteners, and hole boring.
• Hardware: Details requirements for bolts, washers, galvanizing, countersinking, framing, bents, posts, pile bents, bent caps, bracing, stringers, and floors.
• Measurement & Payment: Outlines how timber structures will be measured (e.g., thousand board feet) and paid for based on bid schedule items.

This document is critical for bidders to understand the specific technical requirements, material specifications, construction methods, and quality control measures related to timber structures. It directly impacts the scope of work, material sourcing, labor, and overall cost estimation for any opportunity involving timber construction.

Form / Attachment / Pricing Sheet

This document is the "Operation and Maintenance Manual for Hand Pumps - 2nd Edition" published by the USDA Forest Service in November 1999. It serves as a comprehensive guide for the installation, operation, maintenance, and repair of hand pumps, specifically focusing on Monitor brand pumps used by the Forest Service.

• Introduction: Discusses the prevalence and reasons for using hand pumps in Forest Service sites.
• Description and Operation: Explains the components and working mechanism of a typical hand pump.
• Sampling and Testing: Outlines procedures for collecting water samples for bacteriological testing.
• Installation: Provides detailed instructions and considerations for installing hand pumps, including regional standard drawings and specific requirements.
• Start-Up and Shut-Down: Details the steps for preparing a hand pump for seasonal use and for shutting it down.
• Maintenance: Covers routine maintenance tasks for various components like the drainage system, slab, pump stand, and sealed pump flanges, as well as well disinfection procedures.
• Spare Parts: Lists common spare parts recommended for stocking by districts.
• Hand Pump Modification: Discusses a conversion kit to upgrade older Monitor pumps to newer models with shrouds.
• Disassembly and Assembly Tips: Offers guidance and recommended tools for disassembling and reassembling pump bases.
• Nomenclature and Diagrams: Includes detailed diagrams and parts lists for various Monitor pump models (1DFHCS, 1DFHFS, 1DFHC, 1DFHF) and a conversion kit.

This manual is highly relevant for any bidder involved in opportunities related to the supply, installation, maintenance, or repair of hand pumps for the Forest Service. It provides critical technical specifications, operational procedures, and maintenance requirements that potential offerors must understand to accurately bid on and successfully perform related contracts. Understanding these details is essential for assessing the scope of work, required materials, and expected performance standards.

Form / Attachment / Pricing Sheet

This document outlines "Contract Administration Data" which details administrative requirements and procedures for contractors performing work under a government contract. It covers invoicing, payments, contract award procedures, changes, unauthorized instructions, designation of representatives, special requirements, and various operational considerations.

• Invoicing & Payments: All invoices must be submitted via the electronic Invoice Processing Platform (IPP). Contractors must register and establish an account with IPP prior to commencing work. Itemized invoices must include Contractor Name & Address, Contract or Purchase Order numbers, Invoice Number, Description of Services or work completed, and Date of services or completion.
• Contract Administration Data: Details procedures for contract award, notice to proceed, changes to requirements (only authorized by the Contracting Officer), handling unauthorized instructions, and the designation of a Contracting Officer's Representative (COR).
• Special Requirements: Includes a mandatory Post Award Conference (virtual), requirements for a Fire Plan (if applicable), designation of Key Personnel (Project Manager, Superintendent, Quality Control Manager, Safety Manager, Emergency Contact, Signature Authority), and contractor responsibility for utility services (water, electricity, restrooms).
• Operational Considerations: Covers differing site conditions, material and workmanship standards, cooperation with other contracts, protection of existing vegetation/structures/utilities, emergency response and fire suppression liability, site security, adverse weather protocols, storage of materials, barricades/warning signs, prohibition of lead-based paint, and control of erosion, sedimentation, and pollution.
• Insurance Coverage: Mandates specific insurance coverages including Workers Compensation and Employer's Liability, General Liability, Automobile Liability, and Aircraft Public and Passenger Liability, with specified minimum amounts.

This document provides critical information for potential bidders regarding the administrative and operational expectations once a contract is awarded. It outlines how payments will be processed, how contract changes are managed, key personnel requirements, and essential compliance areas such as insurance, safety, environmental protection, and site management. Understanding these requirements is crucial for accurate proposal development and successful contract execution.