Roof Repairs Buildings BB260, BB265, & BB270

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for roof repairs at Buildings BB260, BB265, and BB270 located at Marine Corps Base, Camp Lejeune, N.C.

• Removal and disposal of existing roof systems, including shingles, edge metal, and underlayment, down to the roof deck.

• Replacement of rotted or damaged decking (up to 5% of the roof area) with material matching existing conditions.

• Installation of new aluminum drip edge (Bone White color).

• Installation of a new self-adhering ice and water membrane over the entire roof surface as underlayment for the standing seam metal roof.

• Installation of new elastomeric expansion joints at existing locations.

• Installation of a new aluminum standing seam metal roof with a vented ridge cap (Sandstone/Slate Gray color).

• Installation of panel clips according to manufacturer recommendations for a 150 MPH wind rating, in accordance with the Uniform Building Code for North Carolina.

• Installation of pipe boots recommended by the standing seam metal roof manufacturer on existing vent pipes.

• Installation of permanent fall protection.

• Repair and refinish areas damaged or disturbed by new work.

• Cleaning of all items to receive new finishes and filling of holes to match existing conditions.

• The building must remain watertight throughout construction and at the end of each day.

• Submittals for material selection, colors, and remediation plans (lead-based paint and asbestos) are required prior to construction.

• Performance criteria for wind resistance (150 MPH) are specified.

• The work is to be performed at Marine Corps Base, Camp Lejeune, N.C.

• The document does not specify a contract duration, but implies ongoing operations during construction.

• Coordination with the Contracting Officer's Representative (COR) for site access, staging, and scheduling is mandatory.

• The contractor must ensure the building remains watertight during construction.

• Submittals for materials, colors, and remediation plans are required.

• The contractor must comply with OSHA standards and government requirements.

• Disposal of debris must follow applicable federal, state, and local regulations. Specific procedures are outlined for asbestos-containing materials, lead-based paint, and non-contaminated materials.

• The contractor must survey existing conditions for asbestos materials and abate them if found.

• Fascia contains lead-based paint.

• Compliance with various UFC criteria, IBC, NFPA, ABA, ADA, and ICC/ANSI standards is required.

• Contractor personnel must wear identification at all times.

• Field verification of all measurements and existing conditions by the contractor before bidding is required.

Other / Unclassified

This document is the "Contractor Environmental Guide" for Marine Corps Base Camp Lejeune, updated September 2023. It serves as a comprehensive resource for contractors working on the installation, outlining environmental laws, regulations, and policies they must comply with. The guide covers a wide range of environmental topics, including:

• Environmental Management Systems (EMS)
• Training requirements
• Air Quality
• Environmental Emergency Planning and Response
• Cultural Resources
• Hazardous Materials/Hazardous Waste Management
• Asbestos
• Lead-Based Paint
• Natural Resources
• Stormwater Management
• Solid Waste, Recycling, and Pollution Prevention (P2)
• Potential Discovery of Undocumented Contaminated Sites
• Permitting

It also includes contact information for various departments and personnel responsible for environmental compliance and provides detailed procedures for specific activities and potential issues.

This guide is crucial for any contractor planning to perform work at MCB Camp Lejeune. It details the environmental requirements, responsibilities, and potential impacts associated with various activities. Understanding and adhering to this guide is essential for ensuring compliance, avoiding penalties, and maintaining mission readiness. Contractors should pay close attention to sections relevant to their specific scope of work, particularly regarding hazardous materials, waste disposal, stormwater, and any potential discovery of contaminated sites or unexploded ordnance. The guide emphasizes the contractor's responsibility to identify and comply with all applicable regulations and to coordinate with the ROICC or Contract Representative for any environmental concerns or questions.

Specification / Technical Document

This document is a specification for "Aluminum Standing Seam Roofing" dated March 08, 2021. It details the requirements for materials, system description, performance standards, submittals, and installation of aluminum standing seam roofing systems.

• References: Lists numerous industry standards and publications (e.g., AA, AF&PA, AISI, ASTM, NRCA, SMACNA, UL, FM) that form part of this specification.
• Definitions: Defines various roofing system types and components.
• System Description: Outlines design requirements, including continuous panels, concealed fasteners, capillary breaks, thermal movement, and load resistance.
• Performance Requirements: Specifies criteria for static pressure air infiltration, static pressure water infiltration, wind and wind-driven rain resistance, roof pressures, hydrostatic head resistance, and wind uplift resistance. It references specific ASTM and AAMA standards for testing.
• Submittals: Details required submittals, including shop drawings, product data, samples, design data, test reports, and certificates. Government approval is required for items designated with a "G".
• Products: Specifies requirements for roofing panels (material, thickness, finish, texture, color, configuration), attachment clips, accessories (flashings, closures, fasteners, sealant, sealant tape), and underlayment.
• Laboratory Tests for Panel Finish: Outlines required tests for panel finish, including salt spray, formability, accelerated weathering, chalking resistance, abrasion resistance, humidity, fire hazard, gloss, and glare resistance.
• Installation: Provides instructions for installation, including examination of surfaces, protection of dissimilar metals, and specific methods for roof panels, flashings, and fasteners.
• Warranty: Details manufacturer and contractor warranty requirements, including duration and coverage for wind damage.

This document is crucial for any bidder proposing to supply or install aluminum standing seam roofing systems. It defines the technical specifications, material requirements, performance standards, and installation procedures that must be met. Bidders must ensure their proposed products and installation methods comply with all referenced standards and requirements outlined herein.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the work covered by the contract documents, focusing on the project description, location, and existing conditions.

• The work includes all items described in the attached project description.

• The location of the work is at the Marine Corps Base Camp Lejeune, North Carolina, at a building or area to be specified by the Contracting Officer.

• Work will commence and be completed in phases as described in the attached project description.

• The contractor is responsible for protecting existing vegetation, structures, equipment, utilities, and improvements.

• Any existing work that is removed or altered must be done in a manner that prevents injury or damage to remaining portions.

• Portions of existing work altered during construction must be repaired or replaced to match existing or adjoining work, as approved by the Contracting Officer.

• Existing work must be in a condition equal to or better than before new work started.

• Location: Marine Corps Base Camp Lejeune, North Carolina.

• Underground Facilities: The contractor must hire a professional utility locator to scan the site and mark existing underground utilities. The contractor must verify the elevations of existing piping, utilities, and obstructions before installing new work. Notification to the Contracting Officer's Representative (COR) is required 48 hours prior to starting excavation work.

• Government-Furnished Material and Equipment: Will be indicated on drawings and in the scope of work, if applicable.

Solicitation / RFP / RFQ

This document is a solicitation for "Roof Repairs Buildings BB260, BB265, & BB270" at MCB Camp Lejeune, NC, Project No. 26-0408. The solicitation is issued by ROICC Camp Lejeune.

• The primary work involves roof repairs to buildings BB260, BB265, and BB270.

• The facility will remain in operation during construction, requiring the contractor to minimize interference.

• Hazardous materials are not present.

• Contract Completion Date: 360 days after award.

• Estimated Cost Range: Between $1,000,000 and $5,000,000.

• Liquidated Damages: $880 per Calendar Day.

• Wage Determination: General Decision Number NC20260010 01/02/2026 Building.

• Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) may apply.

• Proposal Due Date: March 27, 2026, by 2:00 pm.

• Proposal Acceptance Period: 60 days from receipt of offers.

• Basis for Award: Lowest Price.

• Requests for Information (RFIs) cut-off: March 12, 2026, by 2:00 PM EST.

• Specifications and drawings are available on SAM.gov.

• Offerors are advised that funding may not be available, and no award will be made if funds are not available. No reimbursement for proposal costs.

• This solicitation is for "ONLY THE FOLLOWING LIST OF CONTRACTORS MAY SUBMIT A PROPOSAL FOR THIS PROJECT." A specific list of contractors is provided with contact information.

• A site visit will be scheduled via amendment.

• Bid bonds are required based on proposal value: 20% of proposal amount for proposals valued at $150K and greater. Payment bonds are required for proposals $35K and greater. No bonds required for proposals less than $35K.

• Buy American Requirement-Construction Materials provision is included.