Solicitation_Gun Mount

Amendment / Modification

• This amendment corrects an administrative error where Amendment 0002 will not be posted to SAM.gov.

• This amendment also corrects an incorrect part number from 11579090 to the correct part number 13001175.

• The part number referenced in the solicitation is being corrected.

• All other terms and conditions of the original solicitation W912CH-26-Q-0030 remain unchanged. The effective date for this amendment is April 21, 2026.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation W912CH-26-Q-0030.

• 3D/STEP Files: 3D/STEP files are available in the SAM.gov attachments. Access requests should follow the same procedure as for TDP access.
• Part Number Correction: Amendment 0003 has been posted to correct the part number. The incorrect part number 11579090 has been updated to the correct part number 13001175.
• First Article Test (FAT) Waiver: If a request for a FAT waiver is approved, CLIN 0011 (First Article Test (FAT) Report) will be excluded from the contract.

Vendors should refer to Amendment 0003 for the corrected part number. The clarification regarding the FAT waiver indicates a potential modification to CLIN 0011 under specific circumstances.

Questions & Answers / Clarifications

This document provides answers to vendor questions regarding Solicitation W912CH-26-Q-0030.

• 3D/STEP Files Availability: 3D/STEP files are available. Vendors should request access in the same manner as they requested Technical Data Package (TDP) access.

This Q&A document clarifies the availability of technical files, which may be relevant for bidders preparing their proposals.

Amendment / Modification

This amendment modifies Solicitation W912CH-26-Q-0030, dated March 27, 2026.

• Item A.1.1 (Description of Action): The Part Number (PN) for the Mount Gun has been updated from 11579090 to 13001175.

• Section A.1.1 (Description of the Action)

• The solicitation is extended. The hour and date specified for receipt of offers is extended.

• Offerors must acknowledge receipt of this amendment.

• Proposals must be submitted for the total quantity of items identified in the solicitation; offers for less than the total quantities will be deemed nonresponsive.

• Only one award will be made as a result of this solicitation.

Solicitation / RFP / RFQ

This solicitation is for a 5-year Requirements, Firm Fixed Price (FFP) contract for a Mount Gun, National Stock Number (NSN) 1010-01-502-7547, Part Number 11579090. This is an 8(a) Business set-aside.

• The primary deliverable is the Mount Gun (NSN: 1010-01-502-7547).

• A Technical Data Package (TDP) is associated with this procurement and is accessible via SAM.gov.

• Offerors must comply with specific packaging, marking, and preservation requirements (MIL-STD-2073-1, Special Packaging Instruction (SPI) 13001175).

• Requirements for heavy phosphate coating (MIL-DTL-16232) and light phosphate coating (TT-C-490) are detailed.

• First Article Test Report (FATR) is required, with provisions for waiver requests.

• Contract Type: Firm Fixed Price (FFP) Requirements contract.

• Period of Performance: Five one-year ordering periods.

• Estimated Value: Not explicitly stated, but CLINs indicate estimated quantities for each ordering year.

• Proposals must be submitted electronically via email to the Contract Specialist and cc'd to the Contracting Officer.

• Offerors must register in the System for Award Management (SAM).

• Proposals must be submitted by the closing date and time specified in Block 5A of the cover page.

• All proposals must remain valid for a minimum of 120 calendar days.

• Evaluation will be based on the lowest evaluated price, with consideration for price reasonableness.

• Offers must be submitted for the total quantity of items; "all or none" applies.

• This solicitation is set aside for 8(a) Businesses.

• Offerors must be registered in SAM.

• Export control restrictions apply to the Technical Data Package (TDP).

• Offerors must have a current DD 2345, Militarily Critical Technical Data Agreement certification to access the TDP.

• Electronic submission of payment requests and receiving reports is required via Wide Area WorkFlow (WAWF).

• Specific clauses regarding cybersecurity, telecommunications, and representations/certifications are included.

Form / Attachment / Pricing Sheet

This document is a worksheet for requesting a waiver or partial waiver of the First Article Test (FAT) requirement. It is intended to be submitted as supporting documentation for such a request.

• Current Acquisition Information: Fields for buyer's name, solicitation/contract number, contractor name and cage code, NSN, part number, noun, and revision level.
• Type of Request: Options for a 'Partial Waiver' (specific tests) or 'Full Waiver' (all tests), with a field to specify TDP references for waived tests.
• Justification to Support Waiver Request: Multiple sections (A-E) to provide reasons for the waiver, including:
  • Successful completion of FAT on a recent contract for the same item.
  • Successful completion of FAT on a similar item.
  • Material in continuous production.
  • Successful FAT on the next higher assembly.
  • Other reasons, requiring specific explanation.
• Other Pertinent Information: Sections to discuss quality issues (PQDRs, CARs), changes to manufacturing data, or waiver/deviation requests.
• Attach Supporting Documentation: Area to add supporting files.
• Submission: Fields for printed name, title, company name, company address, phone number, and signature of the company agent.

This form is relevant to bidders who may need to request a waiver for First Article Testing as part of their proposal or contract. It outlines the information and justification required by the government for such requests. Bidders should consult the solicitation or contract for specific instructions on submitting this form and any additional requirements for FAT waiver requests.