Spray Insulation Foam Services

Amendment / Modification

This amendment (0001) addresses questions from prospective contractors regarding the solicitation.

• The primary purpose is to provide answers to contractor questions, which may implicitly affect the understanding of various sections of the original solicitation.

• No changes to proposal deadlines or submission requirements are explicitly stated in this amendment. Bidders should refer to the original solicitation for these details.

• Solicitation Number: W911N226QABB1

• Requirement: Spraying insulation foam in shipping containers for the Force Sustainment program at Letterkenny Army Depot.

• Set-Aside: Total set-aside for small business concerns.

• NAICS Code: 238310 – Drywall and Insulation Contractors.

• PSC Code: J023 – Maint/Repair/Rebuild of Equipment- Ground Effect Vehicles, Motor Vehicles, Trailers, and Cycles.

• Contracting Activity: Letterkenny Army Depot, Chambersburg, PA.

• Period of Performance (PoP): Estimated 20 August 2026 to 19 August 2031.

• Minimum Contract Quantity: 1 unit.

• Maximum Contract Quantity: 110 units.

• Delivery Location: W0L6 USA DEP LETTERKENY, LETTERKENNY ARMY DEPOT, PA 17201-4150.

• Delivery Lead Time: No later than five (5) business days after receipt of order.

• F.O.B. Point: Destination.

• Evaluation Factors: Comparative Analysis of Technical, Past Performance, and Price. An "Entry Gate" requires proof of training/certification by a spray foam manufacturer.

• Quote Submission Deadline: 14 April 2026 at 1200 Eastern Time via email to Bobie Burkett (bobie.j.burkett.civ@army.mil) and Tom Hall (thomas.c.hall111.civ@army.mil).

Questions & Answers / Clarifications

This document provides clarifications and answers to vendor questions regarding the opportunity.

• Total Quantity: The estimated quantity of 76 units represents the total anticipated volume over the full ordering period, not per individual work request or annually.
• Service Call Quantity: Contractors should anticipate both single and multiple container task orders per service call. Services are to be completed the same day regardless of quantity.
• Container Configuration: All containers to be serviced will follow the same configuration and dimensions as depicted in the government drawing and are to be completed to the same performance standards.
• Site Logistics: The Government will be responsible for staging and positioning containers. The government POC will lift containers onto stands to provide safe access to the underside.
• Surface Condition: Surface condition varies. Most assets will have a newly installed container floor. If existing spray foam is present, the vendor is responsible for its removal prior to new application.
• Weather Impact: Vendors should plan for inclement weather. Extreme weather (high winds, extreme cold, heavy snow/rain) may require rescheduling to the soonest available date without penalty. Rescheduling should be limited.

These clarifications do not appear to modify any stated requirements, due dates, or submission rules, but provide essential details for understanding the scope and execution of the work.

Solicitation / RFP / RFQ

This document is a combined synopsis/solicitation for commercial services, specifically the task of spraying insulation foam on the underside of shipping containers. It constitutes the only solicitation, and a separate written solicitation will not be issued. The acquisition is a total set-aside for small business concerns.

• Provide all labor, materials, tools, services, and equipment to spray insulation foam on the underside of shipping containers.

• Services must be performed in accordance with the attached Drawing Specifications and Performance Work Statement (PWS).

• The North American Industry Classification System (NAICS) code is 238310 – Drywall and Insulation Contractors.

• Product Service Code (PSC) is J023 – Maint/Repair/Rebuild of Equipment- Ground Effect Vehicles, Motor Vehicles, Trailers, and Cycles.

• Period of Performance (PoP): Estimated from 20 August 2026 to 19 August 2031.

• Contract Type: Not explicitly stated, but implied to be a contract for commercial services.

• Quantity: Minimum contract quantity is 1; maximum is 110. The estimated quantity will typically be ordered in single-unit increments on an as-needed basis over the five-year period.

• Delivery & Acceptance Location: WOL6 USA DEP LETTERKENY, LETTERKENNY ARMY DEPOT, 1 OVERCASH AVENUE BLDG 9950, CHAMBERSBURG, PA 17201-4150, UNITED STATES, DODAAC: W91FVA.

• Lead Time: No later than five (5) business days after receipt of order.

• Submission Deadline: Quotes are due no later than 14 April 2026 at 1200 Eastern Time.

• Submission Method: Via email to Contract Specialist Bobie Burkett (bobie.j.burkett.civ@army.mil) and Contracting Officer Tom Hall (thomas.c.hall111.civ@army.mil).

• Evaluation Factors: Award will be made to the responsible offeror whose quote is most advantageous to the Government, considering price and other factors. Evaluation will be based on:

  • Entry Gate Criteria: Proof of training/certification by a spray foam manufacturer for products meeting PWS specifications.
  • Evaluation Factors: Technical, Past Performance, and Price.
  • Award may be made to other than the lowest priced quote if a price premium is warranted due to technical merit. Technical equivalence will lead to award to the lower priced quote if reasonable.

• This acquisition is a total set-aside for small business concerns.

• The solicitation incorporates provisions and clauses by reference, accessible at www.acquisition.gov.

• See attached Performance Work Statement and Drawing Specifications for detailed requirements.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Performance Work Statement (PWS) outlines the requirements for providing spray insulation foam services.

• The contractor shall provide all personnel, equipment, tools, materials, supervision, quality control, and non-personal services necessary for spraying insulation foam.

• Services are to be performed at Letterkenny Army Depot.

• The contractor shall develop and maintain an effective Quality Control (QC) program.

• The Government will evaluate performance based on a Performance Requirements Summary (PRS).

• Base Ordering Period: August 20, 2026, to August 19, 2031 (5 years).

• Option to Extend Services: August 20, 2031, to February 19, 2032.

• Place of Performance: Letterkenny Army Depot.

• Work hours: 7:00 AM - 3:00 PM, Monday through Friday, on agreed-upon days, excluding recognized U.S. holidays and facility closures.

• Safety and Environmental: Operations must comply with applicable safety and environmental laws, regulations, and standards, including OSHA, DOD, Army, and local LEAD requirements. Specific attention to NFPA and ANSI standards is required.

• Chemical Use: A Contractor/Tenant Chemical Use Request (AMLD FORM 4783) must be submitted prior to performing the first spray foam service.

• Safety Data Sheets (SDS): Current SDS for chemicals used must be provided upon award and updated as needed.

• Security: Contractor employees require background checks and must comply with installation access policies. AT Level I, iWATCH, and OPSEC training are mandatory for employees working on Army installations.

• Personnel: Employees must be trained and certified on equipment and materials used. A Contract Manager (CM) must be designated.

• Quality Control: The contractor must ensure all employees performing spray foam application are trained and certified on equipment and materials used.

• Deliverables: AT Level I, iWATCH, and OPSEC training certificates must be submitted electronically to the TPOC according to the schedule in Technical Exhibit 2.

• Work must begin within five business days of a work request (95% compliance).

• All work must be completed the same business day (95% compliance).

• Foam application thickness: 2.5 inches ± 1½ inch (95% compliance).

• Foam must not be applied to forklift pockets and ISO lock corner fittings (99% compliance).

• Foam must not contact outside painted surfaces (99% compliance).

• The Government will provide workspace.

• The contractor shall furnish all other required items, materials, and equipment not specified as Government-Furnished.

Form / Attachment / Pricing Sheet

This document, "Contractor/Tenant Chemical Use Request" (AMLD FORM 4783), is a form to be completed by contractors before bringing chemicals onto Letterkenny Army Depot (LEAD) property. It serves as a request and tracking mechanism for chemical usage.

• Page 1: Requires contractor information including Project Name/Contract #, Proponent, Phone Number, POC, and Comments. It also outlines the process for obtaining approvals from Area Supervisor/POC, Industrial Hygiene, Fire Prevention, Safety Office, and Environmental Management.
• Page 2: Requires a detailed list of chemicals to be used, including Chemical Name and Manufacturer, Flash-point, Quantity Ordered, and Description of Application Methods. Alternatively, a spreadsheet with this information can be attached.
• SDS Documentation: Contractors must submit current Safety Data Sheet (SDS) documentation for all listed chemicals.
• Compliance: Contractors must comply with acknowledgement comments from Industrial Hygiene, Fire Prevention, Safety, and Environmental Management.

Bidders responding to opportunities that involve the use of chemicals on Letterkenny Army Depot must be aware of this requirement. This form and its associated SDS documentation will need to be completed and submitted as part of the contract execution, prior to any chemical use. It highlights potential compliance and safety requirements related to chemical handling and usage within the scope of the contract.

Form / Attachment / Pricing Sheet

This document provides detailed specifications and visual guidance for the application of CK spray foam insulation to containerized kitchen units. It specifies the locations and thickness of the insulation required.

• Insulation Location: Foam is to be applied only in the valleys between floor support ribs.
• Insulation Thickness: Specified as 2.5 inches with a tolerance of +/- 0.5 inches.
• Exclusion Area: Explicitly states "DO NOT SPRAY AREA INSIDE FORKLIFT POCKETS."
• Visual References: Includes photographs illustrating the correct application areas and areas to avoid.

This document is critical for bidders to understand the precise requirements for spray foam insulation application on the specified equipment. It details the exact areas for application and the required thickness, directly impacting the scope of work, material estimation, and quality control for any vendor bidding on related opportunities.