UNICOR Yazoo City Buckles and Stiffener
Overview
Buyer
Place of Performance
NAICS
PSC
Set Aside
Original Source
Timeline
Qualification Details
Fit reasons
- NAICS alignment with historical contract wins in similar service areas.
- Scope strongly matches core technical capabilities and delivery model.
Risks
- Past performance thresholds may require one additional teaming partner.
- Potential clarification needed on staffing minimums before bid/no-bid.
Next steps
Validate eligibility requirements, assign capture owner, and schedule partner outreach to confirm teaming strategy before submission planning.
Notice Type: Combined Synopsis/Solicitation
Response Date/Time: 02:00 PM CST, December 12, 2025
Set-Aside: Unrestricted
Notice ID: CT2378-26
NAICS Code: 326199 – All Other Plastics Product Manufacturing
PSC/FSC: 8305- Textile Fabrics
Place of Performance: YAZOO CUT AND SEW - LOW, 2225 HALEY BARBOUR PKWY, YAZOO MS 39194
Contracting Office: Federal Prison Industries/UNICOR
Point of Contact: Harley Jacobson, Contract Specialist. harley.jacobson2@usdoj.gov
Berry Amendment Compliance Certification: The offeror shall certify that all plastic buckles, side-release buckles, stiffeners, webbing, and any other synthetic components delivered under this contract are 100% domestically melted or produced in the United States. Foreign-manufactured items are NOT acceptable. Offerors shall submit a Berry Amendment letter of compliance/supply-chain traceability letter with their quotation.
Description:
(i) This is a combined synopsis/solicitation for commercial products/services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a separate written solicitation will not be issued.
(ii) This acquisition is not set aside. NAICS code and small business size standard are listed above.
(iii) Line Items:
CLIN 0001 – STF0001 PLASTIC-STIFFENER,.030",7/8"X3" 95,000 EA.
PLASTIC-STIFFENER,.030",7/8"X3"
ATTACHMENT STRAP STIFFENER
IAW: 3.7.8.1 OF CO-PD-02-02N DATED APRIL 5, 2019
HIGH-DENSITY POLYETHYLENE
.030 INCH THICK 7/8" W X 3"L
NATURAL IN COLOR, WHEN TESTED IAW TABLE VIII OF CO-PD-02-02N.
CERTIFICATE OF CONFORMANCE REQUIRED WITH EACH SHIPMENT.
BERRY AMENDMENT CERTIFICATE REQUIRED:
#MATERIAL MUST BE COMPLIANT WITH DFARS 252.225-7012 PREFERENCE FOR
CERTAIN DOMESTIC COMMODITIES.# BERRY CERTIFICATE MUST INCLUDE A
SPECIFIC REFERENCE FOR ANY COMPONENT CONTAINING A RAW
MATERIAL THAT HAS BEEN DEEMED #NON AVAILABLE# OR IS
COVERED UNDER A DNAD. SEE: FAR 25.103 AND 25.104
Unit Price: $__________ Extended Amount: $__________
CLIN 0002 – STF0015 PLASTIC,STIFFENER,.030,7/8"X5-5/16" 145,000 EA.
PLASTIC,STIFFENER,.030,7/8"X5-5/16"
ATTACHMENT STRAP STIFFENER
IAW: 3.7.8.1 OF CO-PD-02-02N DATED APRIL 5, 2019
HIGH-DENSITY POLYETHYLENE
.030 INCH THICK 7/8" W X 5-5/16" L
NATURAL IN COLOR, WHEN TESTED IAW TABLE VIII OF CO-PD-02-02N.
CERTIFICATE OF CONFORMANCE REQUIRED WITH EACH SHIPMENT.
BERRY AMENDMENT CERTIFICATE REQUIRED:
#MATERIAL MUST BE COMPLIANT WITH DFARS 252.225-7012 PREFERENCE FOR
CERTAIN DOMESTIC COMMODITIES.# BERRY CERTIFICATE MUST INCLUDE A
SPECIFIC REFERENCE FOR ANY COMPONENT CONTAINING A RAW
MATERIAL THAT HAS BEEN DEEMED #NON AVAILABLE# OR IS
COVERED UNDER A DNAD. SEE: FAR 25.103 AND 25.104
Unit Price: $__________ Extended Amount: $__________
CLIN 0003 – BUK0075 FEMALE-BUK,SIDE-REL,1",SURFACE,TAN-499 82,500 EA.
FEMALE-BUK,SIDE-REL,1",SURFACE,TAN-499
FEMALE BUCKLE,SIDE RELEASE, 1", FOR SURFACE MOUNT, TAN-499
COLOR:TAN -499
SPECIFICATION: I.A.W. PARA. 3.6.9.2 OF GL-PD-05-03C Dated May 13,2015 AND DRAWING 2-6-239
TO BE USED WITH:
BUK0002 1" MALE SURFACE MOUNT BUCKLE
BUK0076 BACKPLATE-BUK,SURFACE,MOUNT,TAN-499
U/M: EACH
UNICOR PART: BUK0075
MATERIAL MUST BE COMPLIANT WITH DFARS 252.217-7026 IDENTIFICATION OF
SOURCES OF SUPPLY.
MATERIAL MUST BE COMPLIANT WITH DFARS 252.225-7012 PREFERENCE FOR
CERTAIN DOMESTIC COMMODITIES.
SPECTRAL REFLECTANCE IS REQUIRED AND MUST MEET REQUIREMENTS STATED IN
GL-PD-05-03C, 05/13/2015, PARAGRAPH 4.4.1.
CERTIFICATE OF CONFORMANCE IS REQUIRED.
FEMALE-BUK,SIDE-REL,1",ACETAL,TAN-499
CERTIFICATE OF CONFORMANCE IS REQUIRED
Unit Price: $__________ Extended Amount: $__________
CLIN 0004 – BUK0076 BACKPLATE-BUK,SURFACE,MOUNT,TAN-499 84,500 EA.
BACKPLATE-BUK,SURFACE,MOUNT,TAN-499
BACKPLATE,BUCKLE,SIDE RELEASE, 1", FOR SURFACE MOUNT, TAN-499
COLOR:TAN -499
SPECIFICATION: I.A.W. PARA. 3.6.9.2 OF GL-PD-05-03C Dated May 13,
2015 AND DRAWING 2-6-239
TO BE USED WITH:
BUK0075 1" FEMALE SURFACE MOUNT BUCKLE
BUK0002 1" MALE SURFACE MOUNT BUCKLE
U/M: EACH
UNICOR PART: BUK0076
MATERIAL MUST BE COMPLIANT WITH DFARS 252.217-7026 IDENTIFICATION OF
SOURCES OF SUPPLY.
MATERIAL MUST BE COMPLIANT WITH DFARS 252.225-7012 PREFERENCE FOR
CERTAIN DOMESTIC COMMODITIES.
SPECTRAL REFLECTANCE IS REQUIRED AND MUST MEET REQUIREMENTS STATED IN
GL-PD-05-03C, 05/13/2015, PARAGRAPH 4.4.1.
CERTIFICATE OF CONFORMANCE IS REQUIRED.
BACKPLATE-BUK,SURFACE,MOUNT,TAN-499
CERTIFICATE OF CONFORMANCE IS REQUIRED
Unit Price: $__________ Extended Amount: $__________
CLIN 0005 – BUK0002 MALE-BUK,SIDE-REL,1",SURFACE,TAN-499 85,500 EA.
MALE-BUK,SIDE-REL,1",SURFACE,TAN-499
MALE BUCKLE,SIDE RELEASE, 1", FOR SURFACE MOUNT, TAN-499
COLOR:TAN -499
SPECIFICATION: I.A.W. PARA. 3.6.9.2 OF GL-PD-05-03C Dated May 13,2015 AND DRAWING 2-6-239
TO BE USED WITH:
BUK0075 1" FEMALE SURFACE MOUNT BUCKLE
BUK0076 BACKPLATE-BUK,SURFACE,MOUNT,TAN-499
U/M: EACH
UNICOR PART: BUK0002
MATERIAL MUST BE COMPLIANT WITH DFARS 252.217-7026 IDENTIFICATION OF
SOURCES OF SUPPLY.
MATERIAL MUST BE COMPLIANT WITH DFARS 252.225-7012 PREFERENCE FOR
CERTAIN DOMESTIC COMMODITIES.
SPECTRAL REFLECTANCE IS REQUIRED AND MUST MEET REQUIREMENTS STATED IN
GL-PD-05-03C, 05/13/2015, PARAGRAPH 4.4.1.
CERTIFICATE OF CONFORMANCE IS REQUIRED.
MALE-BUK,SIDE-REL,1",ACETAL,TAN-499
CERTIFICATE OF CONFORMANCE IS REQUIRED
Unit Price: $__________ Extended Amount: $__________