USDA Forest Land Management Integrated Resources (LMIR) BPA Call

Form / Attachment / Pricing Sheet

This document provides detailed information for tree planting units across three main items: Taylor Park Area (Item 1), Lujan Creek Area (Item 2), and North Zone Project Area (Item 3). It serves as a critical reference for bidders to understand the specific requirements and scope of work for each planting unit.

Item 1 – Taylor Park Area: Details 13 planting units with specifics on FACTS ID, Unit Name, Acres (FACTS and Net Planting), Desired Trees Per Acre (TPA), Estimated Trees Needed, Average Spacing, Seed Lot, Boundary Marking, Non-planting Areas, Tree Shelter Type, Aspect, Slope, Elevation, Vehicle Access, Walk-in Distance, and Delivery Points.

Item 2 – Lujan Creek Area: Details 11 planting units with similar information as Item 1, covering areas like Lujan Creek, Divide Salvage, and Slumgullion.

Item 3 – North Zone Project Area: Details numerous planting units with specifics on FACTS ID, Unit Name, Acres (FACTS and Net Planting), Desired TPA, Estimated Trees Needed (including boxes), Average Spacing, Seed Lot, Boundary Marking, Non-planting Areas, Tree Shelter Type, Aspect, Slope, Elevation, Vehicle Access, Walk-in Distance, and Delivery Points.

General Tree Planting Information: Includes details on planting stock (Lodgepole Pine, Engelmann Spruce), stock type (Container), age (1-year), clearing and scalping requirements, acceptable established trees, and shade/protection requirements (down log, stump, standing dead tree, rock, max distance from microsite protection materials, planting spot selection, and tree shade cards).

This chart is essential for bidders to quantify the scope of work, understand site-specific conditions, and plan for logistics such as tree delivery and access. It provides granular data on the number of trees required, spacing, and seed types for each unit, directly impacting resource allocation and pricing strategies. Bidders must carefully review the details for each item and sub-item to accurately estimate costs and capabilities.

Form / Attachment / Pricing Sheet

This document is a "Register of Wage Determinations" issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It provides the minimum wage rates and fringe benefits required for various occupations under the Service Contract Act for specific geographic areas within Colorado.

• Wage Determination Numbers: Identifies specific wage determinations (e.g., 2015-5435, 2015-5423, 2015-5433).
• Revision Numbers and Dates: Indicates the revision status and last revision date for each determination.
• Geographic Area: Specifies the counties or areas covered by each wage determination.
• Occupational Listings: Provides a comprehensive list of job titles (occupations) with corresponding codes.
• Minimum Wage Rates: Lists the minimum hourly wage rate for each occupation.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listing. Specific details on health and welfare benefits are provided, including rates for regular service contracts and those covered by Executive Order 13706.
• Executive Orders: Notes the applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) to covered contracts.
• Vacation and Holiday Policies: Outlines standard paid vacation and holiday entitlements for federal contract employees.
• Footnotes and Special Conditions: Includes information on computer employee exemptions, hazardous pay differentials, and uniform allowances.

This document is crucial for bidders as it establishes the minimum wage and fringe benefit requirements for service employees working on federal contracts within the specified areas of Colorado. Bidders must ensure their proposed labor costs and wage structures comply with these determinations to be considered compliant and to accurately price their proposals. Failure to adhere to these wage rates can lead to non-compliance and potential penalties.

Form / Attachment / Pricing Sheet

This document, "Attachment 1 - Supplemental Contract Information," provides detailed technical definitions, terminology, and specifications relevant to a contract, likely for tree planting or silviculture services. It outlines requirements for both Contractor Furnished Property (CFP) and Government Furnished Property (GFP), as well as detailed work requirements, standards, and payment calculations.

• Technical Definitions: A comprehensive glossary of terms used in the contract (e.g., Acceptable Established Tree, Danger Tree, Microsite, Planting Stock, Quality Assurance).
• Contractor Furnished Property (CFP): Specifies tools and equipment the contractor must provide, such as hoedads, power augers, dipping tubs, planting bags, heat tarps, and transportation.
• Government Furnished Property (GFP): Details property and services the government will provide, including planting stock (bareroot and container grown), project maps, access roads, and potentially artificial shade materials.
• Work Requirements & Standards: Covers road access, tree handling and care, tree preparation (dipping, clearing, scalping), tree planting techniques, on-site shade requirements, spacing guidelines, and non-planting areas.
• Quality Control & Payment: Outlines contractor quality control responsibilities, government inspection processes, methods for calculating planting quality, payment structures based on quality, and procedures for rework and damages.
• Damages: Defines fixed damages for planting quality below 80% and charges for wasted trees and materials.

This attachment is crucial for bidders as it defines the operational standards, material requirements, quality expectations, and payment terms. Understanding these details is essential for accurately estimating costs, developing a compliant technical proposal, and successfully executing the contract if awarded. It clarifies responsibilities for property, specifies planting methods, and details how performance will be measured and compensated.

Form / Attachment / Pricing Sheet

This document contains a series of maps detailing planting units for the 2026 Grand Mesa, Uncompahgre & Gunnison (GMUG) National Forest Tree Planting project. The maps visually represent the locations and boundaries of various planting areas across different items and units.

• Map 1: Vicinity Map - Provides an overview of the project areas within the GMUG National Forest, including Item 1 (Taylor Park), Item 2 (Lujan Creek and Divide, Slumgullion), and Item 3 (Longslough, Cow Creek).
• Map 2: Taylor Park Item 1 Tree Planting Units - Details specific planting units within the Taylor Park area, including Unit 1-1 (Forest Hill Mill) and Units 1-2 to 1-13 (Taylor Firewood Units).
• Map 3: Taylor Park Item 1-1 Tree Planting Unit Forest Hill Mill - A detailed aerial view of Unit 1-1 at Forest Hill Mill.
• Map 4: Taylor Park Item 1 Tree Planting Units Taylor Firewood Area - An aerial view of Units 1-2 to 1-13 in the Taylor Firewood Area.
• Map 5: Cochetopa Park Item 2 Tree Planting Units - Shows planting units for Item 2, including Lujan Creek Units (2-1 to 2-4) and Divide Salvage Units (2-5 to 2-7).
• Map 6: Lujan Creek Items 2-1 To 2-4 Tree Planting Units - Detailed aerial view of Lujan Creek planting units.
• Map 7: Divide Salvage Items 2-5 To 2-7 Tree Planting Units - Detailed aerial view of Divide Salvage planting units.
• Map 8: Slumgullion Pass Item 2 Tree Planting Units - Details planting units for Item 2 in the Slumgullion Pass area, including Last Tree Salvage Units (2-8 to 2-10) and Rambo Salvage Unit (2-11).
• Map 9: Last Tree Items 2-8 To 2-10 Tree Planting Units - Detailed aerial view of Last Tree Salvage planting units.
• Map 10: Rambo Salvage Item 2-11 Tree Planting Unit - Detailed aerial view of the Rambo Salvage Unit.
• Map 11-14: North Zone Planting, Item 3 - Detailed aerial views of Item 3 planting units (3-1 to 3-31), showing planting focus areas, planned drop points, and system roads.

These maps are critical for bidders to understand the precise geographic locations and scope of the tree planting work. They provide essential visual information for planning logistics, site assessment, and execution of planting tasks within the specified units and areas.