USNS POINT LOMA - SAUER AIR COMPRESSORS

Form / Attachment / Pricing Sheet

This document is a data sheet for the Sauer Compressors USA Model WP 22L air compressor. It provides technical specifications and details about the standard and additional equipment included with the unit.

Characteristics:

• Operation Pressure Range: 100-580 PSI
• Flow Capacity @ 550 PSI: 15.0 SCFM
• Required Power: 7.5 HP
• Voltage: 440 V
• Current: 11.5 A
• Frequency: 60 Hz
• Weight: 298 LB
• Noise: 87 dB at 1m
• Ambient Temperature Range: +41 up to +140 °F
• Residual Oil Content at Air Outlet: <5 mg/m³

Standard Equipment:

• Air intake and silencing filter
• Intercooler and final recooler
• Oil and water separator
• Safety valve
• Final pressure gauge
• Solenoid valve for automatic drainage
• Unloaded starting relief
• Splash lubrication
• Fan flywheel
• Flexible coupling
• Assembly of compressor and electric motor
• Resilient mounts
• Three phase, NEMA, electrical motor size 213T (7.5 HP, 1770 RPM, 440V, 60Hz, IP 54 / F insulation)

Additional Equipment:

• Non-return valve
• Air pressure switch for automatic start/stop
• Low oil level shutdown switch
• High air temperature shutdown switch
• Compressor control and monitoring unit

Test and Certificates:

• Work test for the compressor and motor

This data sheet provides critical technical specifications for the WP 22L air compressor. Bidders should review these details to ensure the compressor meets the performance, environmental, and operational requirements outlined in the solicitation or related documents. It details the included standard and optional equipment, which may be relevant for proposal development and understanding the full scope of the offered system.

Other / Unclassified

This document is a memorandum detailing the justification for using other than full and open competition for an acquisition under the simplified acquisition threshold. It specifies the item/service required, the sole source identified, and the reasons for this determination.

• Item/Service: Hose replacements for store crane maintenance.
• Sole Source: Sauer Compressors USA.
• Reason for Sole Source:
  • Restrictive Rights: Sauer Compressor is the Original Equipment Manufacturer (OEM). Other companies lack the required technical data, proprietary software access, and diagnostic tools to service these specific compressors. Sauer Compressor owns the drawings.
  • Standardization: The specific make/model (WP22L) is required to satisfy the government's needs for additional units or replacement items, aligning with MSC's standardization initiative. This model is used on EPF Class vessels.
  • Brand Name: The item is a brand name product essential to the government's requirements. MSC lacks the manufacturing and technical information to evaluate non-OEM parts for equivalence.
• Delivery: Required Delivery Date is April 12, 2026. Period of Performance (POP) is August 3, 2026 - October 31, 2026.
• Intended Use: To support store crane maintenance during the ROH (likely a specific operational period or event).
• Anticipated Dollar Value: XXX.XX (specific value not disclosed in this document).

Solicitation / RFP / RFQ

This solicitation (N3220526Q0012) is for the procurement of MISTRAL SERIES, WP22L COMPRESSORS for USNS POINT LOMA. The government is procuring two (2) units.

• Two (2) MISTRAL SERIES, WP22L COMPRESSORS.

• The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent, as per DFARS 252.211-7003.

• Material and equipment must be packed, crated, and prepared for shipment according to DODMANUAL 4140.01, VOLUME 9, and MIL-STD-2073-1(series) or ASTM D3951(series).

• Crating must comply with ISPM standards for wood packaging material.

• Markings on boxes/crates/containers must be a minimum of 2-inch stenciled letters, including "MARK FOR: USNS POINT LOMA (T-EPF 16)", "REQUISITION NUMBER: TBD", and "PURCHASE/DELIVERY ORDER NUMBER: TBD".

• Shipments for multiple vessels must be delivered in separate boxes/crates/containers for each vessel.

• Pricing Arrangement: Firm Fixed Price.

• Inspection and Acceptance Location: Destination.

• Delivery Date: On or Before 12 Jun 2026.

• FOB Details: Contractor Destination.

• Offers are due by 13 Mar 2026 at 12:00 PM.

• Evaluation will be based on technical acceptability and price, with technical and past performance considered in relative importance to price.

• Quotes must be submitted in Adobe or Microsoft Office format via email to the contracting officer and contract specialist identified in block 9.

• Vendor standard commercial terms and conditions will not be considered and may result in rejection.

• This acquisition is set aside for Small Business.

• The North American Industry Classification Standard (NAICS) code is 333912 with a size standard of 850 employees.

• The solicitation number is N3220526Q0012.

• The solicitation issue date is 26 Feb 2026.

• Payment requests and receiving reports must be submitted electronically via Wide Area WorkFlow (WAWF).