USS BLUE RIDGE 5C1 DSRA TYCOM 7 (YOKOSUKA, JAPAN)

Amendment / Modification

• This amendment distributes the revised Contract Data Requirements List (CDRL), R2.

• Contract Data Requirements List (CDRL)

• All other information from the original solicitation remains unchanged. No impact on proposal deadlines or submission requirements is indicated beyond the distribution of the revised CDRL.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies the data items a contractor must provide as part of a contract. It outlines the requirements for an Integrated Production Schedule (IPS).

• Data Item No. A001: Integrated Production Schedule (IPS)
• Authority: DI-MGMT-82075
• Contract Reference: To be determined (TBD)
• Frequency: As Required (ASREQ)
• Distribution: Specified in Block 16, with distribution to DOD components and DOD contractors. Critical technology considerations apply.
• Submission Requirements:
  • Initial submittal within five (5) calendar days upon contract award.
  • Subsequent submissions every 30 days until the start of the availability.
  • Submissions are not required after the start of the availability.
  • Schedule to be submitted electronically.
• Points of Contact (POCs): Several listed for Code 1209, including email addresses.
• Contractor Work Start Date: 7/21/2026
• Contractor Work Completion Date: 6/20/2028

This CDRL details a mandatory deliverable for the contractor: an Integrated Production Schedule. Bidders need to understand the requirements for creating, submitting, and updating this schedule, including the specific deadlines, submission methods (electronic), and the points of contact for inquiries. The specified work start and completion dates are also critical for planning and proposal development.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) Short Form, detailing specific work requirements for the "High Pressure Steam Drain System (T & OP) - KTR" on the USS BLUE RIDGE (LCC-19).

• Component Name: 25811-3-300KTR
• CU Phase Title: High Pressure Steam Drain System (T & OP) - KTR
• Preparing Activity: Includes names and contact information for preparation and approval.
• Reason for Work/Need for Change: EM01L261
• CU Phase Description: Tightness & Operational Test for High Pressure Steam Drain System - KTR.
• Task Name / Task Description: Details contractor, QA, and S/F work for accomplishing and documenting the tightness & operational test, referencing TP 25811-3-300KTR.
• Material References: Lists relevant documents and materials.

This document outlines a specific task (tightness and operational testing of the High Pressure Steam Drain System) and the associated work breakdown, including requirements for contractor, QA, and S/F personnel. It serves as an instruction for performing and documenting this critical test.

Amendment / Modification

This amendment addresses a vendor question regarding the provision of a specific gasket (HH-P-31).

• The government will provide the gasket as Government Furnished Material (GFM).

• Paragraph 2.4.1 (Gasket (HH-P-31)) is affected.

• The document lists the specific part numbers and descriptions for the gasket:

  • Item NO.: 400, Part Number: 3819P22114A06, Description: PACKING, C-234 H.TAKEMOTO, Stock Number: 9B 5330 012100534
  • Item NO.: 401, Part Number: 3819P22115A02, Description: PACKING, C-234 H.TAKEMOTO, Stock Number: 9B 5330 012100534

• This amendment clarifies a material requirement but does not appear to alter submission deadlines or evaluation criteria.

Form / Attachment / Pricing Sheet

This document is a "TASK GROUP INSTRUCTION" (TGI) for the "Auxiliary Steam System (T & OP) - KTR" (Tightness & Operational Test).

• Component Name: 53411-3-300KTR
• Ship/Hull No.: LCC-19 (USS BLUE RIDGE)
• Task Description: Accomplish and document the tightness and operational test for the Auxiliary Steam System.
• Work Breakdown: Includes Contractor work, QA work, and S/F work.
• References: TP 53411-3-300KTR is referenced for the test procedures.
• Dates: Preparation and approval dates are noted, with a working status date of April 17, 2025, and April 29, 2025.

This document outlines a specific task related to the Auxiliary Steam System, detailing the required tests and associated work breakdown. It serves as an instruction for performing and documenting these tests, referencing specific procedures and components.

Amendment / Modification

• This amendment (0007) to solicitation N6264925RA059, dated 13-Jun-2025, provides a response to a vendor question.

• The amendment clarifies requirements for ASTM B700 Silver Plate, specifically regarding TYPE and Grade.

• The clarification pertains to Paragraph 2.1.6.2 of the solicitation.

• The amendment does not extend the proposal submission deadline.

• The response provides recommended specifications for silverplating:

  • Type 1 (99.9% min purity)
  • Class S - A silver finish with a supplementary chromate treatment to resist tarnishing.

• All other terms and conditions of the original solicitation remain unchanged.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the "TASK GROUP INSTRUCTION" for "S/A 88717D, ACCOMPLISH MAIN ENGINE LUBE OIL TEMP SWITCH INSTALLATION" on the USS BLUE RIDGE (LCC-19).

• Primary Task: Installation of a Main Engine Lube Oil Temperature Switch.

• Location: Engine Room (8-86-0-E).

• Procedures: Includes pumping out, cleaning, and drying the bilge area; accomplishing electrical modifications and installations as per specified references; and addressing new/disturbed surfaces.

• Deliverables: Installation of the specified switch and associated modifications.

• Not explicitly detailed as performance metrics, but includes references to specific documents (Ref. No. 1 through 5) and detailed procedures for work completion.

• QA inspection is required.

• Work Start Date: 7/21/2026

• Work Completion Date: 11/21/2027

• Place of Performance: Engine Room (8-86-0-E) of USS BLUE RIDGE (LCC-19).

• Potential Lead Hazard: Noted.

• Services Provided by SRF-JRMC: Crane and rigging, utility services (electrical, low pressure air, water, steam), safety inspections, gas-free inspections, and QA inspections.

• Materials: A detailed material list is provided, including specific part numbers, descriptions, and quantities for items such as terminal boards, switches, screws, nuts, and cable.

• Government Furnished Material (GFM): SRF-JRMC will provide GFM listed in the Material List.

• Coordination: Provision of oily/chemical water barge will be coordinated by the Project Team.

Forms / Attachments / Pricing Sheets

This document package contains several enclosures related to a Task Group Instruction (TGI) for radiographic testing. It includes:

• Enclosure-01: A mapping plan detailing the location of piping and joints.

• Enclosures-02-1, -02-2, and -02-3: QA Form J20A, which is a Report of RT Operations and Evaluation. These forms document the details of radiographic testing performed on specific joints.

• Appendix "J": TGI Job Summary Information Sheet, providing an overview of the task.

• Appendix "M": TGI Material List, detailing materials used.

• Appendix "D": Deficiency Form, used for recording any deficiencies found.

• The TGI itself (No. 3819P25507R01) focuses on accomplishing radiographic test inspection for specific welded joints (PJ-1, PJ-2, and PJ-5) on the 1B Main Feed, Economizer Outlet piping in the Fire Room (8-76-0-E) of the USS BLUE RIDGE (LCC-19).

• The QA Form J20A reports detail the RT performed, including weld type, acceptance standards, penetrameter information, exposure technique, film details, and interpretation of results for each joint.

These documents provide critical technical details and inspection results for the work described in the TGI. Bidders involved in or evaluating this type of inspection work would use these forms to understand the scope, methodology, and outcomes of the radiographic testing performed on the specified piping system.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the tasks and requirements for replacing the Furnace Light and Furnace Camera Wall Box Assembly of the 1B Boiler Combustion Monitoring System (BCMS).

• Replacement of one (1) each Wall Box Assembly for the Furnace Light and one (1) each for the Furnace Camera.

• Installation of castable refractory for the Wall Box Tube.

• Removal of existing castable refractory.

• Fabrication and installation of new gaskets.

• Accomplishment of specific requirements from document 009-12, Table 2, Column A.

• Installation of new castable refractory.

• Accomplishment of requirements from document 009-32 for new and disturbed surfaces.

• Contractor work start date: July 21, 2026

• Contractor work completion date: November 21, 2027

• Location of Work: Fire Room (8-76-0-E)

• Handling and disposal of known/suspected radiation substance waste.

• Segregation, packaging, and labeling of radiation substance waste.

• Use of specific materials including Carbon Steel (ASTM A-36), Castable Refractory (MIL-C-717), and gasket material conforming to GRAPH-LOCK 3125SS, MIL-DTL-24696.

• Asbestos abatement work of outer casing is covered by a separate TGI (3819P22103A01).

• Removal and installation of boiler outer casing exterior insulation and lagging is covered by a separate TGI (3819P22102A01).

• Government Furnished Material (GFM) will be provided by SRF-JRMC.

• SRF-JRMC will provide services including crane and rigging, electrical utility, low pressure air, water, and steam supply, safety inspection, gas free inspection, on-sight support, and QA inspection.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines a specific task for the "FIREMAIN SYS (T & OP) - KTR" phase. It details the work required for tightness and operational testing of the Firemain System.

• TGI Number: 52111-3-300KTR
• Ship/Hull Name: USS BLUE RIDGE (LCC-19)
• Task Description: Accomplish and document the tightness and operational test for the Firemain System.
• Work Breakdown: Includes tasks for Contractor work (V), Quality Assurance (QA) work (G), and Ship's Force (S/F) work.
• References: TP 52111-3-300KTR is referenced for the test procedures.
• Dates: Preparation and approval dates are listed, with the instruction dated 06-MAY-2025.

This document specifies a required task related to the Firemain System's tightness and operational testing. Bidders involved in this opportunity should understand this task as part of the overall work scope, particularly if their work involves system testing, QA, or direct execution of these procedures on the USS BLUE RIDGE.

Form / Attachment / Pricing Sheet

This document, "TASK GROUP INSTRUCTION (TGI) NO.: 1A BLR SAF V & PNL", details the removal and installation of 1A Boiler Safety Valves and Pilot Panels on the USS BLUE RIDGE (LCC-19). It serves as a work order and technical guide for the task.

• Scope: Removal and installation of 1A Boiler Safety Valves and Pilot Panels.
• Locations: Fire Room (8-76-0-E) and Blower Room (5-79-0-E).
• Components: Specific quantities and specifications for High Drum, Low Drum, and Superheater Safety Valves and Pilot Panel Assemblies are listed, including manufacturer details and part numbers.
• Materials: Extensive lists of required materials, including gaskets, bolts, nuts, and washers, are provided in Appendices "M" and detailed across multiple pages.
• Procedure: Outlines the steps for removing and installing equipment, restoring mating surfaces, and replacing gaskets.
• Dates: Contractor work start date is 7/21/2026, and completion date is 11/21/2027.
• References: Lists relevant drawings and standard items.
• Appendices: Includes a Job Summary Information Sheet (Appendix J), Material List (Appendix M), and Deficiency Form (Appendix D).

This document provides specific technical requirements, component details, and material needs for a maintenance task. Bidders would use this to understand the scope of work, identify necessary parts and labor, and estimate project timelines and costs for the removal and installation of boiler safety valves and pilot panels.

Form / Attachment / Pricing Sheet

This document is a "Short Form Task Group Instruction" (TGI) detailing the replacement of a view port gasket and light for the 1B Boiler on the USS Blue Ridge (LCC-19). It outlines the scope of work, procedures, required materials, and references for the task.

• Task: Replace View Port Gasket and Light of 1B Boiler.
• Location: Fire Room (8-76-0-E).
• Equipment: 1B Boiler, Main Propulsion.
• Components: 4x View Port Windows, 4x Casing Lights.
• Procedure: Detailed steps for removing existing components, cleaning, and installing new gaskets and lights, referencing specific standards and drawings.
• Materials: Includes a detailed material list with specifications for items such as cloth, insulation, adhesive, wire mesh, cement, gaskets, standoffs, and lamps.
• Government Furnished Material (GFM): SRF-JRMC will provide GFM as listed.
• Services: SRF-JRMC will provide services including crane operation, utility services (electrical, air, water, steam), safety inspection, gas-free inspection, QA inspection, and NDT inspection.
• References: Lists relevant documents, standards, and drawings for the task.
• Dates: Contractor Start Date: 7/21/2026; Contractor Work Completion Date: 11/21/2027.

This document provides specific technical details, procedural requirements, and material specifications necessary for contractors to understand and bid on the work to replace a view port gasket and light on the 1B Boiler. It details the scope, required materials, and services, enabling bidders to estimate costs and resources accurately.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) dated April 14, 2025. It details a specific task group instruction for the "FORCED DRAFT BLOWER SYS 1B1 (OP), S/A 98081D - KTR" on the USS BLUE RIDGE (LCC-19).

The document outlines an "Operational Test for Forced Draft Blower System." It specifies the task name and description, indicating that contractor, QA, and S/F work will involve accomplishing and documenting this operational test in accordance with reference document TP 25111-3-300KTR. It also lists material references and a material list, though these are not detailed in the provided pages. This information is relevant for bidders to understand the nature of the testing required for this component.

Other / Unclassified

This document is a placeholder page indicating that the PDF viewer may not be able to display the document's content. It provides instructions on how to upgrade to the latest version of Adobe Reader and offers a link for further assistance.

This document does not contain substantive information related to the opportunity. It serves as a technical notification for PDF viewing issues and does not provide details on requirements, deliverables, or submission instructions.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines specific tasks and requirements for a "FUEL OIL SERVICE SYS, PIPING & MISC (T & OP) - KTR" phase. It serves as an instruction set for a particular work item.

• TGI Number: 26111-3-300KTR
• CU Phase Title: FUEL OIL SERVICE SYS, PIPING & MISC (T & OP) - KTR
• CU Phase Description: Tightness & Operational Test for FUEL OIL SERVICE SYS, PIPING & MISC (T & OP) - KTR.
• Tasks: Includes contractor work, QA work, and S/F work, all involving accomplishing and documenting the tightness & operational test in accordance with reference TP 26111-3-300KTR.
• References: TP 26111-3-300KTR is cited as the reference document for the test.
• Dates: Preparation and approval dates are noted, with a working status date of 17-APR-2025 and 29-APR-2025.

This document details a specific technical task (tightness and operational testing of a fuel oil system) that is part of a larger opportunity. Bidders involved in systems maintenance, repair, or testing, particularly on naval vessels (USS BLUE RIDGE mentioned), should review this to understand the scope and requirements of this particular work item.

Solicitation / RFP / RFQ

This document is a Task Group Instruction (TGI) for the "Set Up and Restoration for 1A Boiler Desuperheater Tightness Test" on the USS BLUE RIDGE (LCC-19). It details the procedures and requirements for accomplishing this specific task.

• Accomplish requirements of 099-906YO and 009-09.

• Install a test fitting to the desuperheater outlet piping for a tightness test.

• Remove the test fitting and install a blank flange after the test, using a new gasket conforming to MIL-G-24716.

• Accomplish requirements of 009-32 for new and disturbed surfaces.

• Maintain cleanliness for the piping system/equipment at Level II.

• Services include crane and rigging, utilities (air, water, steam), safety inspection, gas-free inspection, and QA inspection.

• The TGI is dated March 3, 2025.

• Contractor work start date: July 21, 2026.

• Contractor work completion date: November 21, 2027.

• This TGI is a response to a Boiler Inspection and Repair Management Information System (BIRMIS) report dated October 17, 2024.

• Not explicitly detailed in this document, but references several other documents and standards for guidance.

• Not specified in this document.

• Potential asbestos hazard identified.

• Tightness Test for mechanical joints of the desuperheater will be covered by T-Phase.

• Government Furnished Material (GFM) will be provided by SRF-JRMC.

• SRF-JRMC will provide specific service work under TGI No. 3819P22114S06.

• Related JCN: EM02-L194.

• References include NAVSEA Standard Items, Local Standard Items, and specific drawings (DWG 514-2492519, DWG 514-2492520).

• Material list includes gaskets and heat-resistant paint.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing the "Clean and Adjust Each 1B Boiler Forced Draft Blower Shutter" task for the USS BLUE RIDGE (LCC-19). It outlines the scope, purpose, procedure, and required materials for this specific maintenance task.

This document provides specific technical instructions and requirements for a maintenance task. While not a solicitation in itself, it details the work to be performed, including:

• Scope: Cleaning and adjusting 1B Boiler Forced Draft (FDB) Shutters (1B1 and 1B2) located in the Fire Room.
• Procedure: Step-by-step instructions for disconnecting and reconnecting hanger assemblies, removing and installing shutters, cleaning, and applying new gaskets.
• References: Lists numerous drawings and specifications (e.g., MIL-S-18525, NAVSEA Standard Items) that bidders would need to consult for detailed requirements.
• Materials: Specifies required materials, including insulation sleeving, packing, adhesive, glass cloth, and cement.
• Timeline: The contractor work start date is July 21, 2026, and completion date is November 21, 2027.
• Support Services: Mentions services to be provided by SRF-JRMC, such as GFM, crane rigging, utility services (electrical, air, water, steam), and safety/gas-free/QA inspections.

This TGI serves as a detailed work package that would inform a bidder's understanding of the technical scope and effort required for this specific maintenance opportunity.

Amendment / Modification

This amendment (0001) to solicitation N6264925RA059 modifies the original solicitation in several ways:

• Extends the solicitation closing date: The original closing date of 16-Jul-2025 has been extended to 23-Jul-2025 at 10:00 AM Japan Standard Time (JST).

• Responds to a vendor question: A vendor inquired about extending the closing date due to the volume of work for estimation. The government agreed to the extension.

• Revises Section A, paragraph 4: This section pertains to the solicitation/contract form and the required response date/time has been updated.

• Revises Section L-1.0, paragraph B: This section addresses general instructions and specifically the submission of questions. The deadline for submitting questions has been extended to 16-Jul-2025 at 10:00 AM Japan Standard Time (JST).

• Section A, paragraph 4 (Solicitation/Contract Form - Response Date/Time)

• Section L-1.0, paragraph B (General Instructions - Question Submission Deadline)

• The proposal submission deadline has been extended to 23-Jul-2025, 10:00 AM JST.

• The deadline for submitting questions has been extended to 16-Jul-2025, 10:00 AM JST.

• All other terms and conditions of the original solicitation remain unchanged.

Form / Attachment / Pricing Sheet

This document is Attachment IV, a Request for Information (RFI) form. It is designed for contractors to submit questions to the government regarding an RFP. The form includes fields for the contractor's name, RFP number, and specific questions, as well as sections for government review and response.

• Contractor Name
• RFP Number (N6264925RA059)
• Contractor Questions section
• Government Use Only section (Technical Reviewer, TGI No., Spec Chg, etc.)

This form provides the official mechanism for bidders to ask clarifying questions about the solicitation (RFP Number N6264925RA059). Bidders should use this form to submit any questions they have to ensure they fully understand the requirements and can prepare a compliant proposal. The government's review sections indicate the internal process for handling these questions.

Solicitation / RFP / RFQ

This document is a Task Group Instruction (TGI) for the overhaul of "1A Boiler Safety Valves & Pilot Panels" aboard the USS BLUE RIDGE (LCC-19). The work is related to a Boiler Inspection and Repair Management Information System (BIRMIS) report dated 17 OCT 2024.

• Overhaul of specific safety valves and pilot panels, including:

  • One EA, 1A Boiler High Drum Safety Valve and Pilot Panel Assembly (Mfr: Greno Industries Inc., Spec: MIL-V-24740)
  • One EA, Safety Valve (Spec: MIL-V-24740, Class I, Style 57)
  • One EA, 1A Boiler Low Drum Safety Valve and Pilot Panel Assembly (Mfr: Greno Industries Inc., Spec: MIL-V-24740)
  • One EA, 1A Boiler Superheater Safety Valve and Pilot Panel Assembly (Mfr: Greno Industries Inc., Spec: MIL-V-24740)
  • One EA, Spear Boiler Pilot Panel (Model: 8000)

• Procedures include matching parts, disassembly, cleaning, inspection, refurbishment, installation of new parts, and shop testing.

• Documentation of test results is required.

• Return of equipment with test certification data sheets to SRF-JRMC.

• This TGI is for contract to OEM (Gleno Industries Inc).

• Contractor work start date: 7/21/2026

• Contractor work completion date: 11/21/2027

• No Government Furnished Material (GFM) is provided.

• Not explicitly detailed in this document, as it appears to be an internal work instruction rather than a solicitation document.

• Not specified.

• References include NAVSEA Standard Items (NSI FY-25), Local Standard Items (LI FY-25), and a specific technical manual (TM S6435-Q1-MMO-010) for a Remote Operated Pilot Safety Valve System.

• Cleanliness for piping system/equipment level II is a special requirement.

Amendment / Modification

This amendment modifies the solicitation N6264925RA059 dated 13-Jun-2025. Key changes include:

• Responding to a vendor question regarding the fabrication of safety nets.

• Distributing a revised document: TGI 3819P65416A01_c1v2.

• Extending the solicitation closing date.

• Revising Section C-1.2.

• Section A: Solicitation/Contract Form (Response date/time extended).

• Section C: Descriptions and Specifications (Specific modifications noted, including Contract Data Requirements Lists and General Requirements).

• Section C-1.2: Applicable Reference Documents.

• The proposal response date/time has been extended from 30-Jul-2025 10:00 AM to 13-Aug-2025 10:00 AM.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing a specific task for the "Potable Water System (T & OP) - KTR" on the USS BLUE RIDGE (LCC-19). It outlines the requirements for tightness and operational testing of the potable water system.

• TGI Number: 53311-3-300KTR
• CU Phase Title: Potable Water System (T & OP) - KTR
• Task Description: Accomplish and document the tightness and operational test for the potable water system.
• References: TP 53311-3-300KTR is referenced for the test procedures.
• Work Breakdown: Includes tasks for Contractor work, QA work, and S/F work, all involving the same core testing requirement.
• Dates: Preparation and approval dates are noted, with a working status date of 02-MAY-2025.

This document specifies a required test for the potable water system. Bidders involved in maintenance, repair, or operational testing of shipboard systems, particularly on the USS BLUE RIDGE, should review this TGI to understand the specific requirements and procedures for the tightness and operational test of the potable water system.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) Short Form, detailing a specific task for the USS BLUE RIDGE (LCC-19). It outlines the "Tightness & Operational Test for Circulating/Cooling Sea Water System - KTR."

• TGI Number: 25611-3-300KTR
• CU Phase Title: CIRCULATING/COOLING SEA WATER SYS (T & OP) - KTR
• Task Description: Accomplish and document the tightness and operational test for the specified system.
• References: TP 25611-3-300KTR is referenced for the task.
• Preparation Date: February 13, 2025
• Work Status: Approved

This document specifies a particular technical task related to the ship's sea water system. Bidders involved in maintenance, repair, or operational testing of shipboard systems, particularly cooling and sea water systems, should review this instruction to understand the scope and requirements of this specific task. It details the work to be performed, including contractor, QA, and S/F (Ship Force) roles, and references a specific drawing or document (TP 25611-3-300KTR) for detailed procedures.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) detailing an operational test for the Forced Draft Blower System 1A1 (OP) for the USS BLUE RIDGE (LCC-19).

• TGI Number: 25111-3-300KTR
• Component Name: 25111-3-300KTR
• CU Phase Title: Forced Draft Blower System 1A1 (OP), S/A 98081D - KTR
• CU Phase Description: Operational Test for Forced Draft Blower System.
• Preparing Activity: Harada, Kazuya (Approved by: Irei, Sean F.)
• Working Status Date: March 26, 2025 (Preparation), April 12, 2025 (Approval)
• Reason for Work/Need for Change: EXSAZC89
• Task/Description: Contractor, QA, and S/F work to accomplish and document the operational test in accordance with reference TP 25111-3-300KTR.
• Referenced Document: TP 25111-3-300KTR, titled "FORCED DRAFT BLOWER SYS (T & OP) - KTR".

This document outlines a specific operational test requirement for a component on the USS BLUE RIDGE. Bidders involved in systems testing, maintenance, or repair of this type of equipment may find this relevant for understanding the scope and requirements of related tasks or opportunities.

Solicitation / RFP / RFQ

This document is a Task Group Instruction (TGI) for the inspection and repair of the side wall sliding feet and casing of the 1B Boiler on the USS BLUE RIDGE (LCC-19). The work is in response to a Boiler Inspection and Repair Management Information System (BIRMIS) report dated October 17, 2024.

• Visual inspection of the interior and exterior of the 1B Boiler casing.

• Solvent cleaning of the sliding feet.

• Fabrication and installation of sheet metal pans for solvent cleaning.

• Removal and installation of fasteners.

• Installation of new injection fittings.

• Application of specific coatings to new and disturbed surfaces.

• Lubrication and demonstration of new grease into sliding feet (to be accomplished by Ship's Force post-repair).

• Contractor Start Date: July 21, 2026

• Contractor Work Completion Date: November 21, 2027

• The document references specific materials and fasteners required for the repair, detailed in the Material List.

• A report detailing the results of the visual inspection must be submitted to the Supervisor.

• Specific procedures and references (e.g., NAVSEA Standard Items, local standard items, specific drawings) are cited for the work.

• Not specified in the provided pages.

• This TGI is related to JCN EM02-L192.

• SRF-JRMC will provide Government Furnished Material (GFM) and services including crane and rigging, utility services (electrical, low pressure air, water, steam), safety inspection, gas-free inspection, and QA inspection.

• Enclosures 01 and 02 provide sketches and details relevant to the work.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing a specific task for the USS BLUE RIDGE (LCC-19). It outlines the "Circulating/Cooling Sea Water System (T & OP) - KTR" phase, which involves a tightness and operational test.

• TGI Number: 25611-3-300KTR
• CU Phase Title: Circulating/Cooling Sea Water System (T & OP) - KTR
• CU Phase Description: Tightness & Operational Test for Circulating/Cooling Sea Water System - KTR.
• Task Name/Description: Accomplish and document the tightness & operational test in accordance with reference TP 25611-3-300KTR.
• Work Breakdown: Includes Contractor work, QA work, and S/F work components.
• Key Dates: Preparation activity dated 22-APR-2025, working status dated 05-MAY-2025, and instruction dated 06-MAY-2025.

This document specifies a required task for the Circulating/Cooling Sea Water System, including testing and documentation. Bidders involved in this system's maintenance or upgrades should note the specific requirements for tightness and operational testing, as well as the associated reference document (TP 25611-3-300KTR).

Amendment / Modification

• CH1: Deletes the paragraph regarding the fabrication of the safety net, effective 7/28/2025.

• The fabrication of the safety net has been removed from the scope of work.

• This change does not appear to impact proposal deadlines or submission requirements, but it removes a previously stated fabrication task.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) related to the "FORCED DRAFT BLOWER SYS 1B2 (OP), S/A 98081D - KTR" phase. It outlines the tasks and requirements for conducting an operational test of the Forced Draft Blower System.

• TGI Number: 25111-3-300KTR
• Ship/Hull: LCC-19, USS BLUE RIDGE
• Phase Title: FORCED DRAFT BLOWER SYS 1B2 (OP), S/A 98081D - KTR
• Description: Operational Test for Forced Draft Blower System.
• Tasks: Includes contractor work, QA work, and S/F work, all requiring accomplishment and documentation of the operational test.
• References: Refers to document TP 25111-3-300KTR for the operational test.
• Dates: Issued on 14-APR-2025.

This document details the specific operational testing requirements for the Forced Draft Blower System. Bidders involved in this system or related maintenance/testing activities should review the tasks, references, and descriptions to understand the scope of work and documentation expectations for the operational test.

Amendment / Modification

• Revises CLIN 0002 in Section B.

• Replaces Attachment II Price Proposal Breakdown Form N6264925RA059 with Attachment II Price Proposal Breakdown Form N6264925RA059_REV1.

• The extended description for CLIN 0002 has been updated to reflect a change in the growth CLIN amount from 17.44 percent to 17.45 percent of the total proposed cost for CLIN 0001. The note regarding U.S. Dollar amounts for administrative purposes and the FY25 Budget Exchange Rate remains the same.

• Section B - Supplies or Services and Prices

• Attachment II Price Proposal Breakdown Form

• No impact on proposal deadlines or submission rules is indicated. Bidders should ensure they are using the revised Attachment II Price Proposal Breakdown Form.

Amendment / Modification

This amendment (0002) to Solicitation N6264925RA059, dated 13-Jun-2025, makes the following changes:

• Responds to a vendor question regarding an urgent request for inspection of the 1A Boiler Economizer Outlet Feed Water System Lift Check Valve and confirms the availability of required DWGs.

• Distributes revised Task Group Instruction (TGI) 3819P22114A11_c1v2.

• Distributes drawings: DWG_1S-595-5_E, DWG_803-5001021_E, DWG_803-6074287_A, and DWG_2492086_81994_-_0001_H.

• Extends the solicitation closing date.

• Revises Section A, paragraph 4.

• Revises Section L-1.0, paragraph B.

• Section A - Solicitation/Contract Form: The response date/time has been changed from 23-Jul-2025 10:00 AM to 30-Jul-2025 10:00 AM.

• Section L - Instructions, Conditions and Notices to Bidders: Modifications have been made to general instructions, including points of contact and requirements for MSRA/ABR agreements.

• The proposal due date has been extended to 30-Jul-2025 at 10:00 AM Japan Standard Time (JST).

• Offerors are reminded to submit questions no later than 23 Jul 2025 10:00 AM JST.

• Offerors must fill in block 12 of the SF 33 with 140 days for proposal validity.

• The solicitation is intended only for sources authorized to operate and do business in Japan.

• Submission of proposals is electronic via email, with DoD SAFE as an alternative for large files.

• Proposals must be in English and formatted for Microsoft Office Suite 2016 or Adobe Acrobat Reader 2017.

• The proposal content is divided into three volumes: Price Proposal, Technical Acceptability Proposal, and Past Performance Proposal.

• Offerors must possess a current NAVSUP FLCY MSRA/ABR Agreement or submit documentation demonstrating compliance with DFARS 252.225-7042.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines a specific task group for the USS BLUE RIDGE (LCC-19). It details the "Aux Steam System (T & OP) - KTR" phase, focusing on the tightness and operational testing of this system.

• TGI Number: 53411-3-300KTR
• Component Name: 53411-3-300KTR
• CU Phase Title: Aux Steam Sys (T & OP) - KTR
• Task Description: Accomplish and document the tightness and operational test for the Aux Steam System.
• Reason for Work/Need for Change: EM02L192
• Preparing Activity: Includes names for preparation, approval, and concurrence.
• Work Certification Signatures: Sections for work review and records review.
• Material References: Lists "TP 53411-3-300KTR" as a reference document for the task.

This document specifies a particular task related to the Aux Steam System testing. Bidders involved in ship maintenance, repair, or testing, particularly on the USS BLUE RIDGE or similar vessels, should review this TGI to understand the scope and requirements of this specific operational test. It provides details on who is preparing the instruction, the specific system being tested, and the required actions for contractor, QA, and S/F work.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) for the "1B BOILER PERISCOPE" component. It details a specific task phase titled "*(K51-01) F/O – ACCOMPLISH CLN, INSP AND ALIGN OF 1B BOILER SMOKE INDICATOR". The document outlines the scope, purpose, and detailed procedures for cleaning, inspecting, and aligning the smoke indicator. It also lists the required materials, including specific parts for the smoke indicator, and identifies the preparing and approving authorities, along with contact information.

This document provides a detailed work breakdown structure and technical requirements for a specific maintenance task on the "1B BOILER SMOKE INDICATOR". Bidders interested in opportunities related to ship maintenance, repair, or overhaul, particularly involving boiler systems and associated instrumentation, would find this document relevant for understanding the scope and technical demands of such work. It specifies the exact procedures, components, and materials involved, which are crucial for estimating costs and resources for a bid.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet containing a price proposal breakdown form for Solicitation No. N6264925RA059, related to services for the USS BLUE RIDGE (LCC-19) during its 5C1 DSRA availability. It is intended for offerors to input their proposed pricing details.

The form includes sections for:

• SUMMARY Tab: Overall solicitation details, CLINs (0001 and 0002), total TGIs (72), and a growth CLIN percentage. It notes that values are linked to other tabs and manual input is not required here.
• Individual TGI Tabs (e.g., 1_3819P123ACA01, 2_3819P123AGA01, etc.): Each tab details specific tasks (e.g., "Preserve Fresh Water Ballast", "Repair Structural Member", "Tightness & Operational Test"). Offerors are instructed to input data in highlighted cells for:
  • In-house and Sub-contractor labor hours (MH)
  • Labor costs (JPY)
  • Material costs (JPY)
  • Other Direct Costs (ODC) (JPY)
  • Total proposed price (JPY)
• Material Cost Breakdown and Other Direct Cost (ODC) Breakdown sections are also provided for detailed itemization.

This form is critical for bidders to accurately detail their proposed costs for each task (TGI) and the overall solicitation. It requires specific input on labor, materials, and other direct costs. Bidders must use this template to submit their pricing as part of their proposal for Solicitation No. N6264925RA059.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines specific tasks and requirements for a "CU PHASE" related to the "Aux Steam System (T & OP) - KTR" on the "USS BLUE RIDGE" (LCC-19).

• TGI Number: 53411-3-300KTR
• CU Phase Title: AUX STEAM SYS (T & OP) - KTR
• Preparation Activity: Includes preparer (Ishii, Yuuhei) and approver (Ohta, Jason Y.) details.
• Reason for Work/Need for Change: EM01L261
• Special Requirements: TGI Short Form
• CU Phase Description: Tightness & Operational Test for Aux Steam System - KTR.
• Task Name / Task Description: Details contractor, QA, and S/F work required to accomplish and document the tightness & operational test, referencing TP 53411-3-300KTR.
• Material References: Lists relevant documents and materials for the task.

This document specifies the exact tasks, testing procedures (tightness and operational), and documentation requirements for the Auxiliary Steam System. Bidders involved in ship maintenance, repair, or testing, particularly on the USS Blue Ridge, would need to understand these detailed instructions to ensure compliance and accurate execution of the work.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) Short Form, detailing a specific task for the USS BLUE RIDGE (LCC-19). It outlines the "FUEL OIL SERVICE SYS, PIPING & MISC (T & OP) - KTR" phase.

• TGI Number: 26111-3-300KTR
• CU Phase Title: FUEL OIL SERVICE SYS, PIPING & MISC (T & OP) - KTR
• CU Phase Description: Tightness & operational test for the specified system.
• Reason for Work/Need for Change: EM02L194
• Task Name/Description: Includes contractor, QA, and S/F work to accomplish and document the tightness & operational test.
• References: TP 26111-3-300KTR is referenced for the test procedure.

This document specifies a particular task related to the Fuel Oil Service System, including testing and documentation requirements. It may be relevant for bidders involved in ship maintenance, repair, or systems testing, particularly for the USS BLUE RIDGE.

Form / Attachment / Pricing Sheet

This document, "WebAIM Short Form TASK GROUP INSTRUCTION," outlines the specific tasks and requirements for replacing a 1B Boiler Steam Atomizing Check Valve with piping on the USS BLUE RIDGE (LCC-19). It serves as a detailed instruction set for the work to be performed.

• Component: 1B Boiler Steam Atomizing Check Valve (PP)
• Task: Replace the existing valve and associated piping.
• Location: Fire Room (8-76-0-E).
• Specifics: Includes details on the quantity, size, and material of the check valve and piping.
• Procedure: Outlines steps for removal, fabrication, installation, nondestructive testing, and hydrostatic testing.
• References: Cites several documents and drawings for guidance, including NAVSEA Standard Items and specific engineering drawings.
• Materials: Lists required materials such as the check valve, pipe, couplings, gaskets, and studs.
• Government Furnished Material (GFM): Specifies materials to be provided by the government.
• Services: Lists required services including crane operation, utility services, and safety/QA inspections.
• Dates: Contractor work start date is 7/21/2026, and completion date is 11/21/2027.
• Related Documents: Mentions TGI No. 3819P22102A01 for insulation and lagging work, and QA Form 28 (Enclosure-01-1) for documenting hydrostatic test results.

This document details the scope of work, technical requirements, materials, and schedule for a specific maintenance task. Bidders would use this to understand the exact nature of the work, the components involved, the required procedures, and the necessary materials and services to accurately estimate costs and timelines for their proposal.

Form / Attachment / Pricing Sheet

This document, "Attachment III Government Furnished Property (GFP-GFM listings).xlsx", provides a detailed listing of Government Furnished Property (GFP) and Government Furnished Material (GFM) relevant to the solicitation. It serves as a reference for bidders to understand the resources the government will provide.

• CONTRACT INFO Sheet: Contains administrative details such as Attachment Number (3), Attachment Date (2025-06-10), and contact information for the Government Contracting Officer (Ai Gillard, ai.gillard.ln@us.navy.mil, 046-816-8385). It also specifies the Attachment Type as 'Solicitation' and indicates the contract number format.
• Provisioned Sheet: Lists specific items that are provisioned, including Line Number, Item Name, Item Description, NSN, MFR CAGE, Part Number, Model Number, Serial Number management status, Property Type, Property Usage, Property System ID, Quantity, Unit of Measure, Unit Acquisition Cost, Use As-Is status, Upgradable status, and Delivery Date. This sheet details the specific materials and equipment being provided.
• Requisitioned Sheet: Lists items that are requisitioned, with similar fields to the Provisioned sheet, indicating items that are requested or needed for the contract.
• Unit Of Measure Sheet: Provides a comprehensive list of available units of measure that can be used in conjunction with the property listings.

Bidders should review this document to understand the specific Government Furnished Property and Material that will be provided. This information is crucial for accurately estimating costs, planning project execution, and ensuring compliance with contract requirements related to the use and management of government-provided assets.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) for the "F/O - CLEAN AND INSPECT EACH 1A BOILER FORCED DRAFT BLOWER" on the LCC-19 USS BLUE RIDGE. It outlines the scope of work, references, general requirements, and detailed procedures for the inspection and cleaning of the 1A Boiler Forced Draft Blowers (FDB).

• Scope: Clean and inspect 1A Boiler Forced Draft Blowers (FDB), including housings, base assemblies, variable inlet vane (VIV) assemblies, and inlet screens.
• Locations: Uptake Space (5-76-0-Q), Blower Room (5-79-0-E), and Fire Room (8-76-0-E).
• Identification: Details specific components for 1A1 FDB and 1A2 FDB, including manufacturer and part numbers.
• References: Lists numerous drawings, technical manuals, and specifications relevant to the work.
• Procedure: Outlines steps for visual inspection, removal/installation of access doors, fasteners, and gaskets, cleaning, and brush-off blasting.
• Materials: Appendix "M" lists required materials such as gaskets and screws, with specifications.
• Personnel: Identifies key personnel for planning and work integration.
• Dates: Contractor work start date is 7/21/2026, and completion date is 11/21/2027.

This document provides a detailed technical scope of work, including specific components, locations, procedures, and required materials for the cleaning and inspection of boiler forced draft blowers. Bidders can use this information to understand the technical requirements, estimate labor and material costs, and assess their capability to perform the work. The document also specifies the period of performance for the contractor.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) related to the inspection of the "1A Boiler Handhole, Manhole Seat and Plate" aboard the USS BLUE RIDGE (LCC-19). It details the scope of work, specific identification of components to be inspected (including quantities of various handhole and manhole plates), and the procedure to be followed. It also references other documents and provides notes on personnel, related work, and government-furnished material.

This document is relevant to potential bidders by outlining a specific task for boiler maintenance and inspection. It details the exact components requiring inspection, the location, and the procedural steps. Bidders involved in shipboard boiler maintenance, repair, and inspection services would find this document useful for understanding the scope and requirements of such tasks, including the quantities of specific parts to be addressed and the associated work procedures and references.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies the data items a contractor must provide as part of a contract. It details the requirements for an Integrated Production Schedule (IPS).

• Data Item No. A001: Integrated Production Schedule (IPS)
• Authority: DI-MGMT-82075
• Frequency: As Required (ASREQ)
• Distribution: Authorized to DOD components and DOD contractors; critical technology.
• Schedule Requirements:
  • Initial submittal within five (5) calendar days upon contract award.
  • Subsequent submissions every 30 days until the start of availability.
  • No subsequent submissions required after the start of availability.
• Submission Method: Electronically.
• Points of Contact (POCs): Listed for SRF-JRMC, Code 1209.

This CDRL outlines a critical deliverable for the opportunity: an Integrated Production Schedule. Bidders must understand the requirements for creating, submitting, and updating this schedule, including the initial and subsequent submission timelines and electronic submission methods. The document also references specific NAVSEA and SRF-JRMC standard items and TGIs that may contain further details on work requirements and performance standards.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) detailing the "Replace View Port Gasket and Light of 1A Boiler" task for the USS Blue Ridge (LCC-19). It outlines the scope, procedure, materials, and personnel required for the job.

• Scope: Replacement of the view port gasket and light for the 1A Boiler located in the Fire Room (8-76-0-E).
• Identification: Specifies the quantity and type of components, including view port windows, casing lights, and studs for cableways.
• Procedure: Details the step-by-step process for removing existing components, cleaning, and installing new gaskets, lamps, and studs. It also references specific engineering instructions and standards.
• Materials: Lists required materials such as gaskets (Garlock 3200), insulation blankets, adhesives, chicken net, cement, and incandescent lamps. It also specifies Government Furnished Material (GFM).
• Services: Outlines services to be provided by SRF-JRMC, including crane rigging, utility services (electrical, air, water, steam), safety inspections, gas-free inspections, QA inspections, and NDT inspections.
• Personnel: Identifies key personnel involved, including planners, engineers, and work integration managers, along with their contact information.
• Schedule: The contractor start date is July 21, 2026, and the completion date is November 21, 2027.

This document provides a detailed breakdown of a specific maintenance task. Bidders can use this to understand the scope of work, required materials, labor hours, and specialized services needed for boiler maintenance. It highlights the specific components involved, the location, and the expected timeline, which are crucial for estimating costs and resources for a bid.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the tasks and procedures for inspecting and repairing the side wall sliding feet and outer casing bolted joint of the 1A Boiler on the USS BLUE RIDGE (LCC-19).

• Inspection and Repair: Visually inspect and repair interior and exterior areas of the casing for the 1A Boiler.

• Sliding Feet: Inspect and repair the side wall sliding feet.

• Casing: Inspect and repair the outer casing bolted joint.

• Materials: Includes specific requirements for bolts, nuts, washers, injection fittings, sheet metal pans, fasteners, and cleaning compounds.

• Procedure: Detailed steps include visual inspection, solvent cleaning of sliding feet, fabrication and installation of sheet metal pans, filling pans with solvent, draining solvent, removing pans, replacing fasteners, and installing new injection fittings.

• Visual inspection of current ship condition.

• Submission of a report detailing inspection results.

• Use of specific materials and fasteners as listed.

• Adherence to procedures for cleaning and repair.

• Contract Start Date: 7/21/2026

• Contract Completion Date: 11/21/2027

• Location: Fire Room (8-76-0-E)

• Lubrication: Post-repair lubrication and demonstration of new grease into sliding feet will be performed by Ship's Force.

• References: The work is in response to a Boiler Inspection and Repair Management Information System (BIRMIS) report dated 17 OCT 2024.

• Services: Crane and rigging, electrical utility, low pressure air, water, and steam supply, safety inspection, gas-free inspection, and QA inspection will be provided by SRF-JRMC.

• Government Furnished Material (GFM): SRF-JRMC will provide GFM listed in the Material List.

Statement of Work (SOW) / Performance Work Statement (PWS)

To accomplish an overhaul of 1B Boiler Safety Valves and Pilot Panels for the USS BLUE RIDGE (LCC-19).

• Overhaul of specific safety valves and pilot panels identified in section 1.3.1 through 1.3.3.

• Includes disassembly, cleaning, inspection, and refurbishment or replacement of parts.

• Installation of new parts and equipment must conform to manufacturer specifications.

• Accomplish shop tests for each equipment item.

• Work must be performed in accordance with specific procedures and standards outlined in the document.

• Test results must be documented.

• Cleanliness for piping system/equipment is specified as Level II.

• Contractor work start date: 7/21/2026

• Contractor work completion date: 11/21/2027

• Work to be performed at the Contractor's Facility.

• This TGI is for contract to OEM (Greno Industries Inc).

• Return equipment with test certification data sheets to SRF-JRMC.

• This TGI is a response to a Boiler Inspection and Repair Management Information System (BIRMIS) report.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) related to the "1A Boiler BCMS" component on the "USS BLUE RIDGE" (LCC-19). It details a "Furnace Light and Camera Wall Box Assembly" replacement task. The document outlines the scope, purpose, location of work, and identification of the components to be replaced, including specific materials and specifications for wall box assemblies and castable refractory.

It also includes procedures for removing existing refractory, handling potential radiation substance waste, installing new wall box assemblies, and fabricating gaskets. The document references several other documents and TGI numbers for specific tasks like insulation and asbestos abatement. It lists required personnel, government-furnished material, and services to be provided by SRF-JRMC, such as crane services, utility services, and safety inspections.

This document is relevant to potential bidders as it defines a specific repair and replacement task for a component on a naval vessel. It provides detailed technical requirements, materials, procedures, and associated services. Bidders can use this information to understand the scope of work, assess their capabilities, and prepare proposals for similar maintenance or repair opportunities. The document also highlights potential hazards like asbestos and lead, and the need for proper waste disposal, which are critical considerations for planning and execution.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing a specific task for the "1A BOILER (T & OP) - KTR" phase. It outlines the contractor's work, quality assurance (QA) work, and safety/fire (S/F) work related to this task.

• TGI Number: 22111-3-300KTR
• Component Name: 1A BOILER (T & OP) - KTR
• Ship/Hull: LCC-19, USS BLUE RIDGE
• Task Description: Accomplish and document the tightness and operational test for the 1A Boiler, in accordance with reference TP 22111-3-300KTR.
• Preparing Activity: OOSAKA, TESSHIN
• Approved By: OHTA, JASON Y.
• Reason for Work/Need for Change: EM02L194
• Date Issued: 05-MAY-2025

This document specifies a required task for the "1A BOILER (T & OP) - KTR" phase, which involves performing and documenting tightness and operational tests. Bidders should note the specific task requirements, the reference document (TP 22111-3-300KTR), and the parties involved in preparation and approval. This provides clarity on the scope of work for this particular phase of the opportunity.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) Short Form, serving as a directive for a specific task related to the USS BLUE RIDGE (LCC-19).

• TGI Number: 25311-3-300KTR
• CU Phase Title: MAIN STEAM SYS (T & OP) - KTR
• CU Phase Description: Tightness & Operational Test for Main Steam System - KTR.
• Preparing Activity: NAGASHIMA, HISAO
• Approved By: OHTA, JASON Y.
• Reason for Work/Need for Change: EM01L261
• Task Description: The core task involves contractor, QA, and S/F work to accomplish and document the tightness and operational test in accordance with reference TP 25311-3-300KTR.
• Material References: Lists a reference document/drawing title for the Main Steam System (T & OP) - KTR.

This document outlines a specific technical task (tightness and operational testing of the Main Steam System) that is part of a larger opportunity. Bidders involved in ship maintenance, repair, or testing, particularly for naval vessels like the USS BLUE RIDGE, should review this to understand the scope and requirements of this particular task.

Form / Attachment / Pricing Sheet

This document, "WebAIM Short Form TASK GROUP INSTRUCTION," outlines the specific tasks, requirements, and procedures for a "Hydrostatic Test of 1A Boiler Fuel Oil (FO) Burner Lead Piping." It serves as a detailed work instruction for the contractor.

• Component: 1A BLR FO BNR LD PPG
• Task: Hydrostatic Test of 1A Boiler Fuel Oil (FO) Burner Lead Piping.
• Location: Fire Room (8-76-0-E).
• Scope: Includes disconnecting and reconnecting three specific FO burner lead piping sections (identified by quantity and location from FO Manifold Root Valve) for hydrostatic testing.
• Testing: Requires hydrostatic testing at 605 PSIG using clean, fresh water, with results documented on QA Form 28 Enclosure-01-1.
• Materials: Lists required materials such as spiral wound gaskets.
• Services: Outlines required services including crane and rigging, electrical utility, low pressure air/water/steam supply, safety inspection, gas-free inspection, and QA inspection.
• Schedule: Contractor work start date is 7/21/2026, and completion date is 11/21/2027.

This document provides the detailed technical requirements, scope of work, testing procedures, materials, and schedule for the hydrostatic testing of specific piping on the USS BLUE RIDGE (LCC-19). Bidders need to understand these details to accurately estimate costs, resources, and timelines for performing this task.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing a specific task group for the USS BLUE RIDGE (LCC-19). It outlines the "MAIN LUBE OIL, SHAFT #1 (T & OP) - KTR" phase.

• TGI Number: 26211-3-300KTR
• CU Phase Title: MAIN LUBE OIL, SHAFT #1 (T & OP) - KTR
• Description: Tightness & Operational Test for Main Lube Oil System #1 - KTR.
• Preparing Activity: Prepared by FUKUDA, YUUJI; Approved by OHTA, JASON Y.
• Reason for Work/Need for Change: EM01L261
• Task Details: Includes contractor work, QA work, and S/F work, all involving accomplishing/documenting the tightness & operational test in accordance with reference TP 26211-3-300KTR.
• Material References: Lists TP 26211-3-300KTR as a key reference document.

This document specifies a particular task (tightness and operational testing of Main Lube Oil System #1) and the associated work requirements. Bidders involved in maintenance, repair, or operational testing on naval vessels, specifically the USS BLUE RIDGE, should review this instruction to understand the scope and requirements of this specific task.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines a specific task group instruction for a "LOW PRESSURE AIR (T & OP), S/A 98081D - KTR" phase. It details the work to be performed, including testing and documentation requirements.

• TGI Number: 55121-3-300KTR
• Ship/Hull Name: USS BLUE RIDGE
• CU Phase Title: LOW PRESSURE AIR (T & OP), S/A 98081D - KTR
• CU Phase Description: Tightness & Operational Test for Low Pressure Air System - KTR.
• Reference Document: TP 55121-3-300KTR (LOW AND MEDIUM PRESSURE AIR (T & OP) - KTR)
• Tasks: The document specifies contractor, QA, and S/F work to "Accomplish/document the tightness & operational test" in accordance with the referenced TP 55121-3-300KTR.
• Preparation & Approval: Includes details of the preparing, approving, and concurring activities with dates.

This document provides specific technical instructions and requirements for a particular task related to the Low Pressure Air System. Bidders involved in this system or similar testing may need to understand these instructions to ensure compliance with the specified procedures and documentation standards.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines specific tasks for a "MAIN FEED WATER SYS (T & OP) - KTR" (KTR) phase. It serves as an instruction set for contractors performing work related to the USS BLUE RIDGE (LCC-19).

• Component Name: 25511-3-300KTR
• CU Phase Title: MAIN FEED WATER SYS (T & OP) - KTR
• Task Description: The primary task involves accomplishing and documenting the "tightness & operational test" for the Main Feed Water System, in accordance with reference TP 25511-3-300KTR.
• Work Breakdown: Includes "Contractor work," "QA work," and "S/F work" components, all referencing the same core task.
• Dates: Preparation and approval dates are noted, with a document date of 06-MAY-2025.
• References: Lists a specific document (TP 25511-3-300KTR) as the basis for the testing procedures.

This document details a specific technical task (testing of the Main Feed Water System) that is part of a larger opportunity. Bidders involved in ship maintenance, repair, or operational testing, particularly for naval vessels like the USS BLUE RIDGE, should review this to understand the scope and requirements of this particular task. It specifies the nature of the work, the required documentation, and the governing reference document.

Amendment / Modification

This amendment (0003) to solicitation N6264925RA059, dated 13-Jun-2025, is effective 15-Jul-2025.

• Purpose: To respond to vendor questions and distribute revised documents.

• Revised Documents Distributed:

  • TGI 3819P22114A12 (revised)
  • TGI 3819P43701A01 (revised)
  • DWG_2492510_81994_C_
  • DWG_NMP-162_D_

• Specific Changes:

  • Question (3) Response: Confirmed that TGI has been revised to allow reference to requested DWGs (3819P22114A12, 514-2492510, NMP-162).
  • Question (4) Response: Paragraph 5.6 has been amended to read: "Remove existing and install each new valve listed in 1.3.6 in accordance with DETAIL 12-A (V1) of 2.9." This clarifies the reference for valve replacement.

• TGI 3819P22114A12 (revised)

• TGI 3819P43701A01 (revised)

• Paragraph 5.6 (amended)

• Detail 12-A (V1) of 2.9 (referenced)

• All other information in the original solicitation remains unchanged.

• Proposal deadlines and evaluation factors are not explicitly mentioned as being modified by this amendment, but bidders should review the revised documents and amended paragraph for any impact on their proposals.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines specific tasks and requirements for a "LOW PRESSURE AIR (T & OP) - KTR" phase on the USS BLUE RIDGE (LCC-19).

• TGI Number: 55121-3-300KTR
• CU Phase Title: LOW PRESSURE AIR (T & OP) - KTR
• Preparing Activity: HARADA, KAZUYA (Prepared by), OHTA, JASON Y. (Approved by)
• Reason for Work/Need for Change: EM01L261
• Special Requirements: TGI Short Form
• CU Phase Description: Tightness & Operational Test for Low Pressure Air System - KTR.
• Tasks: Includes contractor work, QA work, and S/F work to accomplish and document the tightness & operational test in accordance with reference TP 55121-3-300KTR.
• Material References: Lists TP 55121-3-300KTR as the primary reference document for the task.

This document details a specific technical task (tightness and operational testing of the low-pressure air system) that is part of a larger project. Bidders involved in ship maintenance, repair, or systems testing, particularly for naval vessels, would find this relevant to understand the scope and requirements of such tasks.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines a specific task group for the USS BLUE RIDGE (LCC-19). It details the "STEAM EXHAUST/ESCAPE SYS (T & OP) - KTR" phase.

• TGI Number: 53441-3-300KTR
• CU Phase Title: STEAM EXHAUST/ESCAPE SYS (T & OP) - KTR
• CU Phase Description: Tightness & Operational Test for Steam Exhaust/Escape System - KTR.
• Preparing Activity: MIZUSHIMA, MASAKI
• Approved By: OHTA, JASON Y.
• Reason for Work/Need for Change: EM01L261
• Task Name/Task Description: Accomplish/document the tightness & operational test in accordance with reference, TP 53441-3-300KTR.
• Work Certification Signatures: Section for completion of work review.

This document specifies a particular task (tightness and operational testing of the Steam Exhaust/Escape System) and its associated requirements. Bidders involved in ship maintenance, testing, or systems work on the USS BLUE RIDGE may find this relevant for understanding the scope of work and required procedures for this specific task group.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) dated April 14, 2025. It outlines a specific task group instruction (TGI NO: 25111-3-300KTR) related to the "FORCED DRAFT BLOWER SYS 1A2 (OP), S/A 98081D - KTR" for the USS BLUE RIDGE (LCC-19).

The TGI details the "Operational Test for Forced Draft Blower System." It specifies contractor, QA, and S/F work to accomplish and document this operational test, referencing document TP 25111-3-300KTR. This document is relevant to potential bidders as it defines a specific task and associated work required for the opportunity, likely related to system testing and documentation.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing the "Dry Lay up of 1A/B Boiler" for the USS BLUE RIDGE (LCC-19). It outlines the purpose, scope, identification of the equipment, and the procedure for accomplishing the dry lay-up.

This document is relevant to potential bidders as it specifies the exact task to be performed: the dry lay-up of the 1A/B Main Propulsion Boiler. It provides key details such as:

• Scope: Dry lay-up of one 1A/B Boiler located in Fire Room (8-76-0-E).
• Equipment Identification: Details for Boiler 1A and 1B, including manufacturer and pressure ratings.
• Period of Performance: Contractor Start Date of 7/21/2026 and Completion Date of 11/21/2027.
• Procedure: References to specific NAVSEA standards and other documents (Ref. No. 1-5) that must be followed.
• Government Furnished Material (GFM): Indicates that SRF-JRMC will provide GFM listed in the Material List.
• SRF-JRMC Services: Lists services to be provided by SRF-JRMC, including crane and rigging, utility services (air, water, steam), safety inspections, gas-free inspections, and QA inspections.
• Material References: Includes a detailed material list with part numbers, descriptions, and quantities for items such as plastic sheeting, rubber sheets, rivets, nuts, washers, and various types of hoses and clamps required for the task.

Form / Attachment / Pricing Sheet

This document, "TASK GROUP INSTRUCTION (TGI) NO.: 1B BLR SAF V & PNL", outlines the "REMOVE AND INSTALL 1B BOILER SAFETY VALVES AND PILOT PANELS" for the USS BLUE RIDGE (LCC-19). It details the specific components, requirements, and procedures for this task.

• Task Title: F/O – REMOVE AND INSTALL 1B BOILER SAFETY VALVES AND PILOT PANELS.
• Location: Fire Room (8-76-0-E).
• Components: Includes specific safety valves and pilot panels for high drum, low drum, and superheater boilers.
• Special Requirements: Cleanliness for piping system/equipment Level II.
• References: Lists relevant NAVSEA Standard Items, Local Standard Items, and specific drawings (e.g., DWG 200-8337506, DWG 200-6577980).
• Appendices: Includes "J" TGI Job Summary Information Sheet, "M" TGI Material List, and "D" Deficiency Form.
• Work Start/Completion Dates: Contractor work start date is 7/21/2026, and completion date is 11/21/2027.
• Material List (Appendix "M"): Provides a detailed list of all required materials, including gaskets, bolts, nuts, and washers, with specifications and quantities.
• Deficiency Form (Appendix "D"): A form for documenting any deficiencies found during the work.
• Joint/Component Assembly Record (Enclosure-02): Details specific joint data and assembly procedures.

This document provides a comprehensive scope of work, including the specific equipment to be removed and installed, required materials, and relevant technical specifications. It is crucial for bidders to understand the detailed requirements for performing this maintenance task on the 1B boiler system.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing the "Cleaning, Inspection, and Alignment of the 1A Boiler Smoke Indicator (Periscope)" for the USS BLUE RIDGE (LCC-19). It outlines the scope of work, specific components involved (lamp unit, damper unit, reflector unit, extension vision unit), procedures for cleaning and inspection, and notes relevant to the task.

This document provides specific technical details and procedural steps for a maintenance task on a critical shipboard system. While not a solicitation, it could inform potential bidders about the types of technical work, components, and standards involved in similar maintenance or repair opportunities within the naval sector. It details the required actions, materials, and references for completing the task, which could be useful for understanding the complexity and scope of such work.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" dated May 6, 2025. It details a specific task group instruction (TGI) for the USS BLUE RIDGE, identified by TGI NO. 22111-2-102KTR. The primary CU Phase Title is "BOILER 1B, DESUPERHEATER (T) - KTR". The document outlines the "REASON FOR WORK/NEED FOR CHANGE" by listing several associated job codes (EM01ZAG0, EM01ZAG2, etc.) and a "JCN" with a similar list of codes. It specifies "SPECIAL REQUIREMENTS" as "TGI Short Form" and provides a "CU PHASE DESCRIPTION" stating "Tightness Test for Boiler #1B, Desuperheater."

Page 2 details the "TASK NAME / TASK DESCRIPTION" which involves contractor, QA, and S/F work to "Accomplish/document the hydrostatic test in accordance with reference, TP 22111-2-102KTR." It also lists "MATERIAL REFERENCES" and a "MATERIAL LIST."

This document provides specific technical instructions and requirements for a task related to boiler maintenance (hydrostatic testing) on the USS BLUE RIDGE. Bidders interested in maintenance, repair, or overhaul (MRO) services for naval vessels, particularly those involving boiler systems, would find this document relevant to understand the scope and nature of specific work packages.

Solicitation / RFP / RFQ

This document is a Task Group Instruction (TGI) for the "F/O - REPLACE FOUNDATION OF 1B AMCW STRAINER IN 8-76-0-E" on the USS BLUE RIDGE (LCC-19). The primary purpose is to replace the foundation of the 1B Auxiliary Machinery Cooling Water (AMCW) Strainer.

• Replace the foundation of the 1B AMCW Strainer.

• Work to be performed in the Fire Room (8-76-0-E).

• The foundation includes a chock for the strainer, located between frames 84 and 86, Starboard.

• Requires pump out, cleaning, and drying of the bilge area.

• Removal of existing foundation and installation of a new one.

• Accomplish requirements of 009-12 and 009-32 of Reference No. One.

• Potential lead and asbestos hazards are noted.

• Contractor work start date: July 21, 2026.

• Contractor work completion date: November 21, 2027.

• Not explicitly detailed in this document, which appears to be a work instruction rather than a solicitation.

• Not specified in this document.

• References include NAVSEA Standard Items, Local Standard Items, and specific drawings (DWG 113-7541895, DWG 114-2491157).

• Government Furnished Material (GFM) will be provided by SRF-JRMC.

• SRF-JRMC will provide services including crane and rigging, electrical utility, low pressure air/water/steam utility, safety inspection, gas free inspection, and QA inspection.

• A detailed material list is provided, including plates, screws, studs, nuts, rubber, and various types of insulation and adhesives.

Other / Unclassified

This document is a placeholder page indicating that the PDF viewer may not be able to display the document content. It suggests upgrading to the latest version of Adobe Reader and provides links for download and assistance.

This document does not contain substantive information relevant to bidders. It is an administrative message related to PDF viewing capabilities.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) detailing the "Clean and Inspect Each 1B Boiler Forced Draft Blower (FDB)" for the USS BLUE RIDGE (LCC-19). It outlines the scope of work, required procedures, references, and materials needed for the task.

• Scope: Clean and inspect 1B Boiler Forced Draft Blowers (FDBs).
• Locations: Uptake Space (5-76-0-Q), Blower Room (5-79-0-E), Fire Room (8-76-0-E).
• Identification: Specific details for 1B1 FDB and 1B2 FDB, including housing, base assembly, and variable inlet vane (VIV) and linkage assembly.
• References: Lists numerous drawings, technical manuals, and specifications relevant to the task.
• Procedure: Details steps for visual inspection, removal/installation of access doors, fasteners, gaskets, cleaning, and brush-off blast cleaning.
• Materials: Appendix "M" provides a detailed material list, including specific gaskets and screws required.
• Dates: Contractor work start date is 7/21/2026, and completion date is 11/21/2027.

This TGI provides a comprehensive outline of the work required for the cleaning and inspection of the 1B Boiler Forced Draft Blowers. Bidders can use this document to understand the specific tasks, locations, technical requirements, and materials involved in this maintenance activity. The detailed procedures and references will be crucial for accurate proposal preparation and execution planning.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines a specific task group for the USS BLUE RIDGE (LCC-19). It details a "GLAND SEAL & VENT EXH SYS (T & OP) - KTR" phase, which involves tightness and operational testing for the Gland Seal and Vent Exhaust System.

• TGI Number: 53421-3-300KTR
• CU Phase Title: GLAND SEAL & VENT EXH SYS (T & OP) - KTR
• Description: Tightness & Operational Test for Gland Seal and Vent Exhaust System - KTR.
• Preparing Activity: Includes names and contact information for preparation and approval.
• Reason for Work/Need for Change: EM01L261
• JCN: EM01-L261
• Task Breakdown: Details contractor, QA, and S/F work, specifying the accomplishment of tightness and operational tests.
• Material References: Lists relevant documents and materials for the task.

This document provides specific technical details and requirements for a task related to the Gland Seal and Vent Exhaust System. Bidders involved in ship maintenance, testing, or systems operations may find this relevant for understanding the scope of work, required tests, and associated documentation for this particular task group.

Solicitation / RFP / RFQ

This document is a Task Group Instruction (TGI) for the "REMOVE AND INSTALL DFT RLF V IN 8-76-0-E" (CU Phase Title N14-03) on the USS BLUE RIDGE (LCC-19). It details the scope, procedure, and requirements for replacing a Deaerating Feed Tank (DFT) Steam Pressure Relief Valve.

• Remove and install one DFT Steam Pressure Relief Valve (4.00-Inch IPS, Type: Relief Valve).

• Work to be performed in Fire Room (8-76-0-E).

• Mating surfaces must be prepared after removal, including removal of high spots, burrs, and foreign matter, and chasing/tapping threaded areas.

• Install new steam piping joint gaskets conforming to MIL-G-24716.

• Adhere to cleanliness requirements for piping systems/equipment (Level II).

• Specific procedures for outside machinist, insulation, and lagging work are outlined.

• Contractor work start date: 7/21/2026

• Contractor work completion date: 11/21/2027

• Related TGI for shop test work: 3819P22114-H01

• Related TGI for SRF-JRMC service work: 3819P22114-S15

• This document outlines the tasks and procedures. Specific submission instructions for proposals are not detailed within this TGI, but it references relevant drawings and standards.

• Not specified in this document.

• This TGI is a response to a Boiler Inspection and Repair Management Information System (BIRMIS) report.

• Potential asbestos hazard is noted.

• Government Furnished Material (GFM) will be provided by SRF-JRMC.

• SRF-JRMC will provide utility services (air, water, steam, electrical) and crane/rigging services.

• Safety and gas-free inspections for SRF-JRMC employees are required.

• References include NAVSEA Standard Items, Local Standard Items, and specific drawings (514-2492510, NMP-162).

Form / Attachment / Pricing Sheet

This document, "SHOP TEST RECORD QA FORM 28", details the results of a hydrostatic test performed on the "STEAM ATOMIZING SYSTEM PIPING". It serves as a record of the test's compliance with specified requirements.

• Test Type: Hydrostatic Test (H)
• Reference Paragraph: 2.1.2
• Medium Used: Feed Water
• Required Pressure: 237 PSIG
• Minimum Duration: 30 minutes
• Actual Pressure: 237 PSIG
• Actual Duration: 30 minutes
• Allowed Leakage: None
• Actual Leakage: None
• Test Result: Satisfactory (SAT)
• References: Includes references to NAVSEA Standard Items and specific drawing numbers.

This record confirms that the hydrostatic testing for the steam atomizing check valve and piping system has been successfully completed. This is a critical step in the overall repair or replacement process, indicating that a key component meets operational pressure requirements. Bidders involved in the associated opportunity should note that this testing has been performed and passed, potentially simplifying their scope of work related to this specific system.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing a specific task phase for the "1B BLR FO BNR LD PPG" component aboard the USS BLUE RIDGE (LCC-19).

• CU Phase Title: *(K37A-02) F/O - ACCOMPLISH HYDRST TEST OF 1B BLR FO BURNER LEAD PP IN 8-76-0-E
• Scope/Purpose: Hydrostatic test of 1B Boiler Fuel Oil (FO) Burner Lead Piping.
• Location of Work: Fire Room (8-76-0-E).
• Identification: Details three quantities of FO Burner Lead Piping (1/2 Inch IPS, Carbon Steel, MIL-T-20157C, SCH 40) from FO Manifold Root Valve No. 23 to No. One Burner, No. 24 to No. 2 Burner, and No. 25 to No. 3 Burner.
• Period of Performance: Contractor work start date: 7/21/2026; Contractor work completion date: 11/21/2027.
• Procedure: Includes disconnecting and reconnecting piping, performing hydrostatic tests at 605 PSIG using clean, fresh water, and documenting results on QA Form 28 Enclosure-01-1.
• Service Work: Mentions services to be provided by SRF-JRMC, including crane service, electrical utility service, low pressure air/water/steam supply, safety inspection, gas-free inspection, and QA inspection.
• Material List: Includes gasket information for the piping.
• Attachment List: Enclosure-01 (3819P22115A06-QA28.docx) dated 10-FEB-2025.

This document outlines a specific technical task (hydrostatic testing of fuel oil piping) with defined locations, materials, procedures, and a timeline. It also specifies the involvement of other entities (SRF-JRMC) for supporting services. Bidders interested in performing similar maintenance or testing tasks on naval vessels would find this document informative regarding the scope, requirements, and execution details.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) that outlines specific tasks and requirements for a particular work item. It serves as an instruction for a task group, detailing the work to be performed, associated requirements, and relevant references.

• TGI Number: 25511-3-300KTR
• CU Phase Title: MAIN FEED WATER SYS (T & OP) - KTR
• CU Phase Description: Tightness & Operational Test for Main Feed Water System - KTR.
• Preparing Activity: MIZUSHIMA, MASAKI (Prepared by), OHTA, JASON Y. (Approved by).
• Reason for Work/Need for Change: EM02L194
• Task Name/Task Description: Includes contractor work, QA work, and S/F work, all focused on accomplishing and documenting the tightness & operational test in accordance with reference TP 25511-3-300KTR.
• Material References: Lists TP 25511-3-300KTR as a key reference document.

This document specifies the exact technical tasks, testing procedures (tightness and operational tests), and quality assurance requirements for the "Main Feed Water System - KTR" component. Bidders need to understand these detailed requirements to accurately estimate costs, resources, and timelines for performing this specific work item as part of a larger opportunity.

Form / Attachment / Pricing Sheet

This document is the Quality Assurance Surveillance Plan (QASP) for the USS BLUE RIDGE (LCC-19) FY26 contract, related to Solicitation N6264925RA059. It outlines the performance criteria, standards, and procedures for the Government's surveillance and oversight of the contractor's performance to ensure timely, adequate, and complete deliverables.

• Government Roles: Defines responsibilities for the Administrative Contracting Officer (ACO) and Project Manager (PM) / Contracting Officer Representative (COR) in overseeing surveillance activities.
• Performance Standards: Specifies that acceptable quality levels are detailed in Enclosure (1) and will be used to assess contractor performance.
• Methods of Surveillance: Includes direct observation, verification of documentation/deliverables, and inspections.
• Evaluation Ratings: Contractor performance will be rated as either acceptable or unacceptable.
• Documentation: Performance (positive and negative) will be documented and may be used for contractual actions and CPARS.
• Frequency of Measurement: Deliverable measurement frequency is defined in the contract/order, with continuous monitoring and periodic analysis of surveillance appropriateness.
• Enclosure (1) - Performance Standards & Acceptable Quality Levels: Details specific requirements for deliverables such as Schedule and Associated Reports (including Initial Integrated Production Schedule, Schedule of Record, Weekly IPS, and Conference Support), Corrective Action Requests (CARs), Accuracy of Condition Found Reports (CFRs), Letters of Concern (LOCs) and Letters of Direction (LODs), and Cure Notices and Show Cause Notices.

This QASP is crucial for bidders as it defines how their performance will be monitored, evaluated, and rated. Understanding these standards and surveillance methods is essential for preparing a compliant proposal and ensuring successful contract execution. It highlights the specific deliverables and reporting requirements, as well as the government's process for addressing performance issues.

Solicitation / RFP / RFQ

This document is a Task Group Instruction (TGI) for the "(RE) F/O – S/A 96771D, ACCOMPLISH ENGINEERING PLANT TEMPERATURE MONITORING SYS" on the USS BLUE RIDGE (LCC-19). It details the scope, purpose, and procedures for accomplishing this work.

• Scope: Accomplish Engineering Plant Temperature Monitoring System.

• Locations: Work will be performed in various compartments including Engine Room, Passage, Uninterruptible Power Supply Equipment Room, and Trunk.

• Tasks: Includes pumping out, cleaning, drying bilges, electrical removals/modifications/installations, fabricating and installing new label plates, and accomplishing specific requirements from referenced documents (e.g., 009-12, 009-25).

• Structural Work: Accomplish structural work for the system as per Ref. No. 11.

• Machinery Work: Remove and install thermometers as per Ref. No. 6.

• Materials: A detailed material list is provided, including transmitters, cables, clamps, speakers, amplifiers, plates, screws, nuts, washers, and various other components.

• Special Requirements: Includes potential asbestos and lead hazards, and requires adherence to specific electrical installation standards (MIL-STD-2003).

• Contract Type: Not explicitly stated, but the document format suggests a work order or task instruction within a larger contract.

• Period of Performance: Work start date: 7/21/2026. Work completion date: 11/21/2027.

• Estimated Value: Not stated.

• Submission: Not applicable in this document; it's an instruction for execution.

• Evaluation: Not applicable in this document.

• Key Deadlines: Work start 7/21/2026, completion 11/21/2027.

• Not specified in this document.

• Calibration of thermometers is the responsibility of ship's force.

• Government Furnished Material (GFM) will be provided as kitted material or by SRF-JRMC.

• SRF-JRMC will provide services including crane rigging, electrical, low pressure air, water, steam supply, and safety/gas-free inspections.

Solicitation / RFP / RFQ

This document is a Task Group Instruction (TGI) for the "Set Up and Restoration for 1B Boiler Desuperheater Tightness Test" on the USS BLUE RIDGE (LCC-19). The work involves accomplishing the setup and restoration of the 1B Boiler Desuperheater Tightness Test.

• Accomplish requirements of 099-906YO and 009-09.

• Install a test fitting to the desuperheater outlet piping for a tightness test.

• Remove the test fitting after the test and install a blank flange.

• Install a new gasket conforming to MIL-G-24716.

• Accomplish requirements of 009-32 for new and disturbed surfaces.

• Provide crane and crane rigging service.

• Provide utilities service, including low pressure air supply, water supply, and steam supply.

• Perform safety inspections for SRF-JRMC employees.

• Perform gas-free inspections for SRF-JRMC employees.

• Perform QA Inspection for (G) symbol(s).

• Maintain cleanliness for the piping system/equipment at Level II.

• The TGI is dated 05-MAR-2025.

• Contractor work start date: 7/21/2026.

• Contractor work completion date: 11/21/2027.

• The TGI is a response to the Boiler Inspection and Repair Management Information System (BIRMIS) for the 1B Boiler report dated 17 OCT 2024.

• Not explicitly detailed in this document, as it appears to be a work instruction rather than a solicitation document.

• Not specified in this document.

• Potential asbestos hazard identified in the initial condition.

• Government Furnished Material (GFM) will be provided by SRF-JRMC.

• SRF-JRMC will provide specific service work under TGI No. 3819P22115S09.

• Related JCN: EM02-L192.

• References include NAVSEA Standard Items, Local Standard Items, and specific drawings for 600LB H.P. AUX STM.

• A material list includes a spiral wound gasket.

• An attachment list includes "ENCLOSURE-01" (Sketch) dated 12-FEB-2025.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the task group instruction for cleaning and adjusting the 1A Boiler Forced Draft Blower (FDB) Shutter.

• Clean and adjust each 1A Boiler Forced Draft Blower (FDB) Shutter.

• Work is located in Fire Room (8-76-0-E).

• Includes one EA of 1A Boiler 1A1 FDB Shutter and one EA of 1A Boiler 1A2 FDB Shutter.

• Also includes one AY of Spring Hanger Assembly for FDB Duct.

• Contractor work start date: 7/21/2026

• Contractor work completion date: 11/21/2027

• Potential Asbestos Hazard.

• Potential Lead Hazard.

• Disconnect and reconnect spring hanger assembly.

• Remove and install FDB shutters.

• Adjust FDB shutters in accordance with specified procedures.

• Clean all exposed parts.

• Install new gasket conforming to HH-P-31.

• Accomplish requirements of 009-32 of Ref. No. One for each new and disturbed surface.

• Safety inspection for SRF-JRMC employees.

• Gas free inspection for SRF-JRMC employees.

• QA inspection for (G) Symbol(s).

• SRF-JRMC will provide GFM listed in the Material List.

• SRF-JRMC will provide Crane and crane rigging service, electrical utility service, low pressure air supply, water supply, and steam supply.

• NAVSEA Standard Items

• Local Standard Items

• Various drawings related to FDB Ducts, Uptakes, Piping Supports, Forced Draft System, and Auto SHTRS.

• Material List includes items such as packing, adhesive, insulation sleeving, cloth, and cement.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) detailing the procedure for inspecting the Main Condenser Scoop Injection Check Valve on the USS BLUE RIDGE (LCC-19). It outlines the scope, references, general requirements, and detailed procedures for the inspection.

• Component: Main Condenser Scoop Injection Check Valve.
• Location: Engine Room (8-86-0-E) and Contractor's facility.
• Identification: One EA, Tilting Disc Check Valve, Mfr: Anchor Valve Co, Drawing No: 2134-5, Size: 36.00 x 38.00 Inch IPS.
• Work Start Date: 7/21/2026
• Work Completion Date: 11/21/2027
• Procedure: Includes mechanical cleaning, visual inspection, performance check (valve cycling), hydrostatic testing (50 PSIG for 30 minutes), and seat tightness testing (7.5-7.6 PSIG for 3 minutes).
• Special Requirements: Cleanliness for Piping/Equipment System Level III.
• Materials: Lists required materials such as rubber gaskets, insulation, fasteners, and adhesive.
• Appendices: Includes TGI Job Summary Information Sheet, TGI Material List, and Deficiency Form.

This document provides specific technical requirements and procedures for inspecting a critical valve. Bidders involved in ship maintenance, repair, or overhaul, particularly for naval vessels like the LCC-19, would need to understand these detailed inspection steps, testing parameters, and material requirements to accurately bid on or perform this work. It specifies the exact valve, testing pressures, durations, and acceptable leakage rates.

Form / Attachment / Pricing Sheet

This document is a "Contract Data Sheet" (Attachment V) used to collect performance information related to a contract. It appears to be a form for reporting on contract execution and compliance.

• Contractor Name
• Contract Number
• Contract Type (e.g., Firm Fixed Price)
• Item/Service Description
• Contract Quantity/Period of Performance
• Customer Name and POC
• Performance Information questions covering delivery schedule, compliance with specifications, rework, modifications, terminations, protests, claims, quality awards, and corrective actions.
• A note indicating that answers with an asterisk require an explanatory narrative.

This form is likely used by the government to assess contractor performance. While not directly used for proposal preparation, understanding the types of performance metrics and questions asked can provide insight into government expectations and past performance considerations for similar opportunities.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing a specific task for the "1B GIS SAFE V OP" component on the "USS BLUE RIDGE" (LCC-19). The task, identified as CU Phase Title (K22-01), involves cleaning, inspecting, and lubricating the "1B Boiler GIS Safety Valve Op System." This includes the hand easing gear box, superheater actuator, and associated cables.

This document outlines the specific procedures, components, and locations for a maintenance task. While not a solicitation, it provides detailed technical requirements and scope of work for a particular system. Bidders involved in ship maintenance, mechanical systems, or valve operations may find this useful for understanding the type of work performed, the components involved (e.g., KUT-ROL hand easing gear box, superheater safety valve actuator), and the required procedures (cleaning, lubricating, functional inspection). It also lists relevant reference documents and government-furnished materials (none in this case). The work is scheduled to start on 7/21/2026 and complete by 11/21/2027.

Other / Unclassified

This document is a "Task Group Instruction" (TGI) related to "Repair Structural Member in 6-86-0-E" for the "USS BLUE RIDGE" (LCC-19). It details revisions to QA Form 28 enclosures and specifies requirements for work affecting a fire zone boundary, including fabrication and staging of a non-flammable closure, and cleanliness for piping systems.

This document outlines a specific repair task on a structural member. While it details the scope and requirements for that particular repair, it does not appear to be a solicitation or a statement of work for a new procurement. It is more of an internal work instruction or modification notice. Bidders would need to refer to the primary solicitation or contract for details on how this specific repair task fits into the overall opportunity.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the Task Group Instruction (TGI) for preserving the bilge area and foundation in compartment 8-76-0-E aboard the USS BLUE RIDGE (LCC-19).

• Preservation Area: Bilge area and boiler foundation located in Fire Room 8-76-0-E, specifically between frames 75 and 81, starboard side.

• Area Size: Approximately 822 Square Feet.

• Tasks: Pump out, clean, and dry the specified bilge area, removing oil, debris, and other foreign matter. Accomplish requirements of 009-32 of Ref. No One, including Table 3, Line(s) 13.

• Surface Preparation: The area is suitable for mechanical tools, rollers, and brushes. The scope excludes chocks and fasteners.

• Materials: Preservation work includes the application of paints, thinners, and other consumables. Lead analysis and sampling are required.

• Reference Documents: Work must adhere to NAVSEA Standard Items (NSI FY-25) and Local Standard Items (LI FY-25).

• Quality Assurance: QA inspection for (G) symbol(s) and review of coating application data is required.

• Safety: Safety and gas-free inspections are required for SRF-JRMC employees.

• Contract Start Date: July 21, 2026

• Contract Completion Date: November 21, 2027

• Location: Fire Room (8-76-0-E) aboard USS BLUE RIDGE (LCC-19).

• Potential Lead Hazard: Identified in the initial condition.

• Critical Coated Area: CCNY-LCC19-070-25.

• Government Furnished Material (GFM): None.

• Support Services: SRF-JRMC will provide crane services, electrical utility, low pressure air, water, steam supply, safety inspections, gas-free inspections, and QA inspections.

• Coordination: Provision of oily/chemical water barge will be coordinated by the Project Team.

• Reference: This TGI is in response to a Boiler Inspection and Repair Management Information System (BIRMIS) report dated October 17, 2024.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) detailing the "F/O – CLEAN, INSP, AND LUBE 1A BOILER GIS SAFETY VALVE OP SYSTEM" for the USS BLUE RIDGE (LCC-19). It outlines the scope, purpose, and procedures for maintenance tasks related to the boiler's safety valves.

• Scope: Cleaning, inspection, and lubrication of the 1A Boiler Low and High Drum Safety Valve Hand Easing Gear Box, Superheater Actuator, and associated cables.
• Location: Fire Room (8-76-0-E).
• Identification: Specifies quantities and manufacturers for the gear boxes, actuators, and cables.
• Procedure: Details steps for cleaning, lubricating, and performing mechanical functional inspections of the identified components.
• References: Lists various drawings, standard items, and other documents required for the task.
• Timeline: Contractor work start date is 7/21/2026, with a completion date of 11/21/2027.

This document provides specific technical requirements and procedural guidance for a maintenance task. Bidders involved in shipboard maintenance, particularly for boiler systems and safety valves, can use this to understand the scope of work, required materials, and inspection criteria for similar opportunities. It highlights the need for detailed procedures, component identification, and adherence to specific technical references.

Solicitation / RFP / RFQ

This document is a Task Group Instruction (TGI) for the "Preserve Bilge Area and Foundation in 8-76-0-E" on the USS BLUE RIDGE (LCC-19). The work is a response to a Boiler Inspection and Repair Management Information System (BIRMIS) report dated October 24, 2024.

• Pump out, clean, and dry the specified bilge area and foundation in Fire Room (8-76-0-E).

• Accomplish requirements of 009-32 of Ref. No One, including specific line items.

• Preservation work including paints, thinners, sampler/analyzer for lead, and miscellaneous covering material and other consumables.

• The TGI is for Component CMPT 8-76-0-E.

• The period of performance is from July 21, 2026, to November 21, 2027.

• Not explicitly detailed in this document, as it appears to be an instruction for work execution rather than a solicitation for proposals.

• Not specified in this document.

• Potential lead hazard identified.

• Critical coated area identified as CCNY-LCC19-069-25.

• Government Furnished Material (GFM) is None.

• SRF-JRMC will provide crane services, utility services (electrical, low pressure air, water, steam), safety inspections, gas free inspections, and QA inspections.

• A sketch (Enclosure-01) is provided for location detail.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) for the "MAIN/AUXILIARY CONDENSATE SYS (T & OP) - KTR" phase. It outlines specific tasks related to accomplishing and documenting a tightness and operational test for this system.

This document details the specific work required for a "KTR" (Key Task Requirement) related to the Main/Auxiliary Condensate System. It specifies the "Contractor work," "QA work," and "S/F work" involved in performing and documenting tightness and operational tests, referencing a specific technical procedure (TP 25541-3-300KTR). Bidders involved in this opportunity should review this TGI to understand the detailed requirements and procedures for testing the condensate system.

Solicitation / RFP / RFQ

This solicitation is for repair and maintenance services for the USS BLUE RIDGE (LCC-19) as part of the FY26 Chief of Naval Operations (CNO) 5C1. The work is to be performed under a Master Agreement for Repair and Alteration of Vessels (MARAV). Firms must possess an active MARAV (MSRA or ABR) to be eligible for award. The solicitation is intended only for sources authorized to operate and do business in Japan.

• Accomplish work specification package requirements as detailed in ATTACHMENT (I) of Section J.

• Adhere to occupational and health standards for shipyard employment (29 CFR 1915).

• Provide and maintain a quality management system.

• Comply with specific activity regulations for crane safety and operation.

• Submit an Integrated Production Schedule with defined milestones.

• Attend various conferences and meetings related to the project.

• Order long lead time structural materials.

• Identify needed repairs and recommend corrective action via Condition Found Reports (CFRs).

• Comply with cybersecurity requirements for access to Federal facilities and IT systems.

• Obtain necessary security clearances and training (e.g., Antiterrorism, OPSEC).

• Contract Type: Firm-Fixed-Price (FFP)

• Period of Performance: January 12, 2026, through December 13, 2027.

• Place of Performance: Commander, Fleet Activities Yokosuka (CFAY) Naval Base.

• CLIN 0001: Base work for the USS BLUE RIDGE (LCC-19).

• CLIN 0002: Growth Reservation for CLIN 0001, representing 17.44% of the total proposed cost.

• Proposal Submission Deadline: July 16, 2025, at 10:00 AM Japan Standard Time (JST).

• Questions Due Date: July 9, 2025, at 10:00 AM Japan Standard Time (JST).

• Access to ATTACHMENT (I) (Work Specifications Package) requires a request via email to risa.sakurai.ln@us.navy.mil and ai.gillard.ln@us.navy.mil by July 9, 2025. Access is granted for 14 days.

• Proposals will be evaluated on a Lowest Price Technically Acceptable (LPTA) basis.

• Evaluation Factors: Price, Technical Acceptability, and Past Performance.

• Award will be made to the responsible offeror with acceptable past performance, a technically acceptable proposal, and the lowest evaluated price.

• The Government intends to award without discussions.

• Offerors must possess an active U.S. Navy MSRA or ABR.

• This solicitation is intended only for sources duly authorized to operate and do business in Japan.

• All work is to be accomplished aboard the USS BLUE RIDGE (LCC-19) at CFAY Naval Base.

• Offerors must submit proposals electronically via email.

• The contract will be awarded as a Firm-Fixed-Price (FFP) single award contract.

Solicitation / RFP / RFQ

This document outlines a Task Group Instruction (TGI) for the "Preserve Fresh Water Ballast (9-86-5-W)" on the USS BLUE RIDGE (LCC-19). The primary objective is to preserve the fresh water ballast tanks.

• Commercial blast cleaning of each tank according to SSPC-SP 6.

• Visual inspection of tanks for coating preservation, structural integrity, deterioration, pitting, cracks, damage, or distortion.

• Submission of a report detailing inspection results.

• Accomplishment of requirements for coating application and new/disturbed surfaces.

• Completion air test of each tank at 2 PSIG with no allowable pressure drop.

• Preservation work includes marine chemist services, paints, thinners, grits, tank watch, air compressor, dryer, fuel oil, air conditioning, and lead sampling/analysis.

• The work is associated with TGI No. BLST 9-86-5-W and ICN: 3819P123AC.

• Contractor work start date: 7/21/2026.

• Contractor work completion date: 11/21/2027.

• Submission of inspection reports and new coating data to the Supervisor.

• QA inspection and review of coating application data.

Not specified in this document.

• Associated TGI numbers include 3819P12343A01 (KTR TGI) and 3819P123ACS02 for SRF-JRMC services.
• SRF-JRMC will provide crane and rigging, electrical utility, water, steam, and low-pressure air utility services, safety inspections, and gas-free inspections.
• References to various NAVSEA standards, technical manuals, and drawings are provided.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) Short Form, detailing a specific task for the DEAERATING FEED TANK (T & OP) - KTR on the USS BLUE RIDGE (LCC-19).

• Component Name: 25571-3-300KTR
• CU Phase Title: DEAERATING FEED TANK (T & OP) - KTR
• Task Description: Accomplish and document the tightness and operational test for the DEAERATING FEED TANK.
• Work Breakdown: Includes Contractor work (V), QA work (G), and S/F work (S), all referencing TP 25571-3-300KTR.
• Special Requirements: TGI Short Form.
• Date Issued: May 2, 2025.

This document outlines a specific technical task related to the DEAERATING FEED TANK. Bidders involved in this opportunity should review the task requirements, including the operational test and tightness check, and the referenced document TP 25571-3-300KTR for detailed specifications and procedures.

Amendment / Modification

This amendment (0008) to solicitation N6264925RA059 modifies the original solicitation dated 13-Jun-2025. Key changes include:

• Reopening the solicitation and extending the response date/time.

• Revising Sections A, B, F, and L-1.0.

• Replacing Attachment II Price Proposal Form with a revised version (REV2).

• Distributing revised Task Group Instructions (TGIs) and Contract Data Requirements List (CDRL).

• Section A: Solicitation/Contract Form (including Master Agreement details, period of performance, place of performance, and offer due date).

• Section B: Supplies or Services and Prices (CLIN 0001 and CLIN 0002 descriptions and exchange rates).

• Section F: Deliveries or Performance (Delivery Schedule for CLIN 0001 and CLIN 0002, and Time of Performance milestones).

• Section L: Instructions, Conditions and Notices to Bidders (General Instructions, specifically regarding access to attachments via DoD SAFE and points of contact).

• The proposal response date has been extended to 17-Oct-2025 at 10:00 AM Japan Standard Time (JST).

• Offerors must request access to ATTACHMENT (I) via email by 10-Oct-2025 10:00 am JST.

• The revised Attachment II Price Proposal Form must be used for submissions.

Form / Attachment / Pricing Sheet

This document is a Task Group Instruction (TGI) detailing specific work requirements for a "1B BOILER (T & OP) - KTR" phase on the USS BLUE RIDGE (LCC-19).

• TGI Number: 22111-3-300KTR
• CU Phase Title: 1B BOILER (T & OP) - KTR
• Description: Tightness & Operational Test for 1B BOILER - KTR.
• Tasks: Includes contractor work, QA work, and S/F work, all requiring accomplishment and documentation of the tightness & operational test in accordance with reference TP 22111-3-300KTR.
• References: TP 22111-3-300KTR is cited for the test procedures.
• Personnel: Lists preparing and approving personnel, zone manager, and job summary ID.

This document outlines a specific technical task (boiler testing) and associated requirements. Bidders interested in performing this type of maintenance or testing work should review the detailed tasks and referenced documents to understand the scope and expected procedures.

Form / Attachment / Pricing Sheet

This document is a "Short Form TASK GROUP INSTRUCTION" (TGI) detailing the repair of a crack on the inner casing of the 1A Boiler, Main Propulsion, on the USS BLUE RIDGE (LCC-19). It outlines the scope, procedure, materials, and services required for this repair.

• Scope: Repair of cracks on the inner casing of the 1A Boiler.
• Location: Fire Room (8-76-0-E).
• Procedure: Includes visual inspection, liquid penetrant inspection (PT) to identify crack ends, drilling stop holes, welding repair, and grinding. It also references other documents and requirements (e.g., 009-12, 009-32).
• Materials: Lists specific materials required, including bolts, nuts, washers, plain weave glass cloth, and fibrous glass thermal insulation.
• Services: Outlines services to be provided by SRF-JRMC, such as crane rigging, utility services (electrical, air, water, steam), safety inspections, gas-free inspections, and NDT inspections.
• Dates: Contractor Start Date is 7/21/2026, and Completion Date is 11/21/2027.
• Attachments: References "Sketch ENCLOSURE-01" for details.

This document provides specific technical details and requirements for a repair task. Bidders would use this to understand the scope of work, the technical procedures involved, the materials and services needed, and the timeline for completion. It highlights the need for specialized inspections (PT, NDT) and materials, as well as coordination with other entities (SRF-JRMC).

Amendment / Modification

• CH1: Revises QA Form 28, dated 04/16/2025.

• CH2: Revises paragraph 5.6, dated 07/11/2025.

• QA Form 28

• Paragraph 5.6

This document details administrative changes and does not appear to impact proposal deadlines or submission requirements.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) dated May 6, 2025. It outlines a specific task group instruction for the "Main/Auxiliary Condensate System (T & OP), S/A 88714D - KTR" on the USS BLUE RIDGE (LCC-19).

The TGI details the "Tightness & Operational Test" for the Main/Auxiliary Condensate System. It specifies contractor work, QA work, and S/F work, requiring the accomplishment and documentation of this test in accordance with reference TP 25541-3-300KTR. This document is relevant for bidders who may be involved in performing or overseeing this specific system test as part of a larger opportunity.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) related to the DEAERATING FEED TANK (T & OP), S/A 88714D - KTR, for the USS BLUE RIDGE (LCC-19).

It outlines specific tasks for contractor, QA, and S/F work, primarily focused on accomplishing and documenting the "tightness & operational test" for the DEAERATING FEED TANK, referencing document TP 25571-3-300KTR. It includes details on preparation, approval, and working status, with a target completion date of May 6, 2025. This instruction is relevant for bidders to understand the specific testing and documentation requirements for this component.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) dated May 6, 2025. It details a specific task group instruction for the USS BLUE RIDGE, component number 22111-2-101KTR, related to "Boiler 1A, Desuperheater (T) - KTR". The primary activity is a "Tightness Test for Boiler #1A, Desuperheater."

This document outlines a specific technical task (hydrostatic testing) required for a component on the USS BLUE RIDGE. Bidders involved in ship maintenance, repair, or overhaul, particularly those working on boiler systems, should note this instruction as it specifies a required activity, associated documentation, and personnel involved (Contractor, QA, S/F work). It may be relevant for understanding the scope of work for related opportunities or for performing the specified task if awarded.

Amendment / Modification

• Change Instruction CH-1: Revises paragraph 5.9.

• The reason for the change is noted as a "Typo miss."

• Paragraph 5.9 is affected.

• No impact on proposal deadlines or submission requirements is indicated.

Form / Attachment / Pricing Sheet

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) detailing a specific task for the "1A MF BLR ECN IN CHK" component on the USS BLUE RIDGE (LCC-19). It outlines the "INSP 1A BLR ECONO OUT FEED WATER SYS LIFT CHECK VLV IN 8-76-0-E" (CU Phase Title) and provides instructions for its execution.

• CU Phase Description: Details the scope and purpose, specifically the inspection of a 1A Boiler Economizer Outlet Feed Water System Lift Check Valve located in Fire Room (8-76-0-E).
• Valve Identification: Specifies one unit of a 5.00-Inch IPS, Cast Carbon Steel, Pressure Seal type valve (Anchor/Darling Valve Co., Valve No: V12).
• Procedure: Outlines a multi-step process including mechanical inspection, disassembly, cleaning, torque testing, liquid penetrant (PT) inspection, and visual inspection of the valve and its components.
• Materials: Lists required materials such as pressure seal rings and label plates.
• References: Cites numerous documents and standards (e.g., NAVSEA Standard Items, DWGs, MIL-STD) that provide guidance for the inspection and repair procedures.
• Contractor Work Dates: The contractor work start date is 7/21/2026, and the completion date is 11/21/2027.
• Support: Indicates that SRF-JRMC will provide Government Furnished Material (GFM) and specific services like crane operation, utility services, and safety inspections.

This document provides a detailed scope of work, specific procedures, and required materials for a maintenance task on a critical valve system. Bidders can use this to understand the technical requirements, necessary resources, and timeline for performing this inspection and repair work. It also clarifies the support and materials that will be provided by the government.

Other / Unclassified

This document is a "WebAIM Short Form TASK GROUP INSTRUCTION" (TGI) related to the inspection and maintenance of a "1B Boiler" aboard the USS BLUE RIDGE (LCC-19). It details a specific "CU Phase" titled "*(BIRMIS) F/O - INSPECT 1B BOILER HANDHOLE, MANHOLE SEAT AND PLATE". The document outlines the scope of work, including the inspection of various handhole and manhole components, and specifies the procedure, which involves accomplishing requirements from referenced documents (009-62, 099-906YO, 009-09). It also lists specific quantities of components to be inspected and provides contact information for key personnel.

This TGI provides specific details about a maintenance task for the 1B Boiler, including the exact components to be inspected (handhole and manhole seats and plates) and their quantities. It also indicates the location of the work (Fire Room) and the required procedures. The document references other TGI numbers for related services such as removal/installation, crane services, utility services, and inspections (safety, gas-free, QA). It also specifies a contractor start date of 7/21/2026 and completion date of 11/21/2027. Bidders involved in ship maintenance, boiler repair, or related services may find this document relevant for understanding the scope and requirements of potential future work related to this specific task on this vessel.