X1DB--NW Metro (Rio Rancho, NM) CBOC Lease (New)

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for janitorial services and site management for a leased clinic space, aiming to maintain a clean, neat, and attractive environment.

• Provide comprehensive janitorial services for all interior and exterior areas of the leased clinic space.

• Utilize cleaning products that are ecologically packaged, environmentally beneficial, phosphate-free, non-corrosive, non-flammable, and fully biodegradable, minimizing harsh chemicals.

• Select paper products with recycled content conforming to EPA's CPG.

• Maintain the clinic to meet housekeeping and sanitization requirements and standards of the Joint Commission (JC).

• Perform daily, weekly, monthly, quarterly, semi-annual, and annual cleaning tasks as specified.

• Includes general janitorial services, terminal cleaning for infectious disease areas, walk-off mat maintenance, umbrella stand and bag services, and daily cleaning requirements for various areas including primary care, specialty care, restrooms, flu stations, corridors, waiting areas, and restricted areas.

• Also includes building maintenance responsibilities such as pest control, structural maintenance, and exterior care.

• Performance will be based on the Contracting Officer's evaluation of results.

• Specific cleaning frequencies and methods are detailed for various tasks and areas.

• Maintenance of building systems (e.g., Essential Electrical System) according to NFPA and Joint Commission standards.

• Airflow (CFM), air changes per hour (ACH), and pressure differential reports for specific rooms are required quarterly.

• Services are for the entire leased clinic space.

• Specific work schedules are provided, including Monday-Friday and Saturday hours, with flexibility for LCO requests.

• Janitorial staff must have no police record for serious offenses and must be supervised by an on-site supervisor.

• Staff must wear photo identification badges.

• Compliance with Federal, State, and Local safety and fire regulations is mandatory.

• Use of EPA-registered germicide for patient areas, floors, and medical equipment.

• Specific types and sizes of supplies (e.g., toilet tissue, paper towels, trash liners) are specified.

• Hazardous waste and sharps containers require specific handling and disposal procedures.

• Staff must complete VA training courses on Privacy and HIPPA annually.

• Staff assigned to biohazard tasks must pass required tests every three years.

• Integrated Pest Management techniques are required.

• HVAC filters must be replaced semi-annually or more frequently as recommended.

• Privacy curtains must be replaced when visibly soiled or as determined by the VA COR.

Form / Attachment / Pricing Sheet

This document, "Appendix F_Prototype-04-PlanningModules.pdf," details the "Planning Components + Modules" for Community Based Outpatient Clinics (CBOCs). It outlines standardized building blocks designed to be flexible and adaptable to various VA care delivery settings, supporting the Patient Aligned Care Team (PACT) model. The document aims to facilitate future clinic flexibility, allowing for additions or alterations based on facility needs.

• Universal Room Design: Most typical rooms are designed to be 125 square feet and adaptable for multiple functions.
• Structural Grid: Components are designed within a 31'-10" x 31'-10" structural column grid for flexibility and efficiency.
• Module Components: Details various components including:
  • Primary Care Modules (Exam Rooms, Consult Rooms, Flex Offices, Team Work Areas, Reception, etc.)
  • Ancillary Services Diagnostic Modules (Audiology, Eye Clinic, General Mental Health, Pathology + Lab, Pharmacy, PMR + Prosthetics, Radiology, Multi-Specialty Care, Mobile Technology Pad, Dentistry).
• Layouts: Provides detailed layouts and key spaces for One, Two, and Three-PACT CBOC prototypes for each component.

This document provides detailed specifications and design considerations for various clinic spaces and modules. Bidders involved in the design, construction, or renovation of CBOC facilities can use this as a reference for understanding the standardized components, room sizes, functional requirements, and layout principles employed by the VA for these types of healthcare facilities.

Form / Attachment / Pricing Sheet

This document, Appendix E - Lessor Performance Scorecard, outlines the performance criteria and thresholds for a lessor's performance related to the opportunity. It serves as a tool to track and evaluate the lessor's adherence to specified performance standards.

• Items Tracked: Includes EOC Round Findings, Routine Work Order Calls, Housekeeping Tasks, Preventative Maintenance, Validated Staff Complaints, TJC Inspections/Documentation, Bathroom and flu station stock, Adequate Staffing on Site to Respond, and Privacy Curtain Semi-Annual Replacement/Laundering.
• Performance Objects: Details specific performance requirements for each item, including timelines for work order completion (e.g., 14 calendar days for EOC findings, 5-10 working days for routine calls), housekeeping task descriptions, PM plan adherence, documentation completeness, stock availability, and response times for immediate concerns.
• Performance Thresholds: Specifies target percentages or maximum allowable instances for each performance item across four quarters (Q1, Q2, Q3, Q4). Examples include 100% for EOC findings, 85% for routine calls, and limits on stock outages or delayed responses.
• Corrective Actions: Notes that if quarterly performance is not meeting the threshold, the lessor is responsible for submitting a performance improvement plan to the VA COR for review and approval.

This scorecard is crucial for potential bidders as it defines the expected performance standards and metrics for the lessor. Understanding these requirements will help bidders assess their capability to meet the contract's performance expectations and prepare proposals that address these criteria. It also clarifies the basis for performance evaluation and potential corrective actions.

Form / Attachment / Pricing Sheet

This document, Appendix D, outlines the requirements for Safety, Fire Protection, and Environmental Management related to the leased space. It details the responsibilities of the Lessor in maintaining safety and compliance.

• General Permits: Lessor must obtain and maintain all necessary permits for building services and equipment, including those for mechanical equipment, generators, and waste disposal.
• Lessor Inspections: Lessor is required to inspect, test, and maintain building systems, fire and life safety systems, and equipment according to NFPA guidelines or local codes. Documentation of these activities must be submitted.
• Government Inspections: The government reserves the right to conduct independent inspections and testing of the leased space and building systems. The Lessor shall assist the government in these assessments.
• Code Violations: The Lessor is responsible for promptly correcting any identified safety, health, or fire hazards and code violations at their own expense.
• Indoor Environment: The Lessor must maintain the building envelope and systems in good repair, controlling water entry to prevent damage and mold growth. Prompt repair of leaks and remediation of mold or other pathogens are required.
• Special Building Equipment: Equipment used to treat and exhaust toxic gases must be maintained in proper operating condition and comply with OSHA, EPA, and local regulations. Operating permits are required for generators and building air/water heating equipment.

This appendix defines critical safety, fire protection, and environmental management responsibilities for the Lessor. Bidders should review these requirements to understand the operational standards and compliance obligations associated with managing the facility, which will impact their proposed approach and costs.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for the Lessor to maintain the building, building equipment, and systems, as well as the exterior premises over the term of the lease, ensuring the property is kept in good condition with professional management and maintenance.

• Maintenance by Lessor: The Lessor is responsible for all maintenance and management of the leased premises.

• O&M Plan Submission: Lessors must provide an Operations and Maintenance (O&M) plan detailing their organization, workforce, staffing, and operating schedules. This plan should include contact information for the designated property management firm, building superintendent, and any subcontractors.

• Scheduled Maintenance: The O&M plan must detail how scheduled maintenance and repairs will be managed, including responsible entities and frequency. This covers:

  • Exterior Maintenance: Landscaping, grounds, irrigation, trash removal, exterior lighting, parking lot, pest control, window washing, hazardous spill response, and general litter pickup.
  • Interior Maintenance: HVAC, plumbing, electrical, pest control, and janitorial services.

• Quality Control: The O&M plan must describe the Lessor's quality control procedures to ensure services are provided as described and to maintain the building's quality and appearance.

• Non-Scheduled Maintenance: Procedures for handling unscheduled maintenance and repairs, including:

  • Emergency Calls: Defined as conditions posing an immediate danger to personnel, property, or operations/security. The on-site superintendent must respond immediately during working hours. Response within 60 minutes of notification is required for emergencies outside working hours. Repairs or neutralization of the emergency condition must occur before departure, with further repairs completed within three (3) working days or as otherwise agreed.
  • Routine Calls: Service calls not classified as emergencies. 85% of routine calls must be completed within five (5) working days of receipt, with the remainder completed within ten (10) working days.

• The lease term (period of performance) and the specific leased premises (place of performance) are implied but not explicitly detailed in this appendix.

• The Lessor or a designated property management firm must have a local, designated property manager available.

• A maintenance personnel (building superintendent) must be on-site during normal working hours.

• The Lessor must have generally used spare parts and common building materials available to support emergency requirements.

Form / Attachment / Pricing Sheet

This document, "P11-NW Metro CBOC Appendix A Lease Design Narrative 1.docx," serves as a comprehensive design narrative for a VA Leased Community Based Outpatient Clinic (CBOC). It consolidates governing codes, standards, references, and guidelines to establish performance-based standards for the design and construction of the facility. It is intended to provide potential bidders with detailed technical specifications across various disciplines.

• General Requirements: Outlines compliance with applicable codes, standards (FGI, ASHRAE, NFPA, etc.), and specific requirements for construction observation offices and photographic documentation.
• Planning and Design Criteria: Details the Patient-Centered Medical Home (PCMH) model, PACT Guiding Principles, and the CBOC planning approach. Includes the Room Data Matrix (RDM) which specifies finishes, acoustics, ceiling heights, door sizes, HVAC, electrical, and lighting requirements per room type.
• Technical Narrative: Provides detailed specifications for Site/Civil, Architectural, Mechanical, Plumbing, Electrical, Lighting, and Telecommunications systems. This includes requirements for site access, parking, building accommodations, acoustics, interior finishes, HVAC design basis, plumbing systems, electrical power, lighting controls, and telecommunications infrastructure (cabling, pathways, rooms, bonding, grounding, equipment).
• Hardware Groups and Modifiers: Specifies detailed hardware requirements for doors, including various lockset functions, closers, and specialized hardware for different room types and security needs.

This document is critical for bidders to understand the full scope of technical requirements for designing and constructing the VA leased CBOC. It details the specific standards, materials, systems, and performance criteria that must be met. Bidders should pay close attention to the Technical Narrative and specific requirements within each section (e.g., HVAC, electrical, plumbing, telecommunications) as these will directly impact project execution, cost, and compliance. The Room Data Matrix and Hardware Groups provide granular detail for specific spaces and components.

Other / Unclassified

This document is a "Program for Design" for the New Mexico NW Metro CBOC Replacement 2025 project, located in Rio Rancho, New Mexico. It details the projected year (2026) and provides a breakdown of various departments and functional areas within the Community Based Outpatient Clinic (CBOC), including:

• Clinical Areas: Lobby/Reception, Patient Aligned Care Team (PACT) Clinic (8 Providers), Eye Clinic, Mental Health Clinic, Physical Medicine and Rehabilitation (PM&R) Clinic, Prosthetics and Sensory Aids Clinic, Home Based Primary Care, Imaging Service, Pathology and Laboratory Medicine, Pharmacy Service, Clinic Management, Logistics Service, Police Service, Canteen Service, Staff Support Area, Support Area, Multi-Specialty Clinic, and Dental Service.
• Room Allocations: For each functional area, the document lists specific room codes, names, quantities, unit areas, net areas, construction phases, and construction types.

This document provides detailed space planning and room allocation information for the proposed CBOC replacement. Potential bidders involved in construction, renovation, or related services can use this to understand the scope and scale of the facility, the types of clinical and support spaces required, and the overall spatial requirements for the project. It serves as a foundational document for understanding the physical needs of the facility.

Form / Attachment / Pricing Sheet

This document, "Exhibit E. 3517B General Clauses (Feb. 2025).pdf", contains a comprehensive list of general clauses applicable to the acquisition of leasehold interests in real property. It serves as a reference for standard terms and conditions that will be incorporated into a lease agreement.

The document is structured by category, including:

• General: Clauses related to definitions, subletting, successors, subordination, statement of lease, substitution of tenant agency, no waiver, integrated agreement, and mutuality of obligation.
• Performance: Clauses covering default by lessor, inspection rights, delivery and condition, progressive occupancy, maintenance, fire and casualty damage, compliance with law, alterations, and acceptance of space.
• Payment: Clauses pertaining to System for Award Management maintenance, prompt payment, assignment of claims, and payment by electronic funds transfer.
• Standards of Conduct: Clauses on contractor code of business ethics, covenant against contingent fees, and anti-kickback procedures.
• Adjustments: Clauses related to price adjustments for illegal or improper activity and price reductions for defective certified cost or pricing data.
• Audits: Clauses on examination of records by GSA and audit and records negotiation.
• Disputes: Clause on disputes.
• Labor Standards: Clauses on post-award small business program rerepresentation, equal opportunity for veterans, and equal opportunity for workers with disabilities.
• Small Business: Clauses concerning protecting the government's interest when subcontracting, subcontractor certified cost or pricing data, notice of price evaluation preference for HUBZone small business concerns, utilization of small business concerns, small business subcontracting plans, and liquidated damages.
• Cybersecurity: Clauses on security requirements, personal identity verification, and basic safeguarding of covered contractor information systems.
• Other: Clauses related to prohibitions on contracting for specific hardware, software, services, and applications, as well as federal acquisition supply chain security act orders.

This document is crucial for potential bidders as it outlines the standard legal and contractual terms that will govern any lease agreement. Understanding these clauses is essential for assessing the full scope of obligations, risks, and requirements associated with the opportunity. Bidders should review these clauses to ensure they can comply with all stipulated conditions, particularly those related to performance, payment, compliance, and reporting.

Solicitation / RFP / RFQ

This document, "SOLICITATION PROVISIONS (Acquisition of Leasehold Interests in Real Property)," outlines the instructions, terms, and conditions for offerors responding to a solicitation for real property leases. It details the process for submitting proposals, modifications, and revisions, as well as the criteria for award.

• Proposal Submission: Proposals must be submitted on prescribed forms, signed, and include any required partner information. Specific methods for submission (paper, electronic, facsimile) will be detailed in the solicitation.

• Modifications & Revisions: Offerors can submit modifications before the closing date or in response to amendments. Revisions after the closing date are only permitted under specific negotiation circumstances.

• Data Restrictions: Offerors wishing to restrict the disclosure or use of data must clearly mark their proposals according to specified legends.

• Award Basis: The Government intends to award a lease to the responsible offeror whose proposal represents the best value.

• Evaluation: Proposals will be evaluated based on factors and subfactors outlined in the solicitation. Discussions may be held with offerors within the competitive range.

• Late Proposals: Late proposals are generally not considered unless they meet specific exceptions related to mailing, Government mishandling, or electronic transmission.

• Timeliness: The closing date and time for receipt of offers are critical. Any amendments to the solicitation will specify acknowledgment requirements.

• Best Terms: Offerors are advised to submit their best terms from a price and technical standpoint in their initial proposal, as discussions may limit the number of proposals considered.

• SAM Registration: Offerors are required to be registered in the System for Award Management (SAM) at the time of award and maintain registration throughout contract performance. This includes having an active SAM record with a unique entity identifier.

• FASCSA Orders: Offerors must represent that they have conducted a reasonable inquiry regarding Federal Acquisition Supply Chain Security Act (FASCSA) orders and do not propose to provide or use prohibited articles or services, unless a waiver is granted or disclosed.

• This document incorporates by reference several other provisions, including "SERVICE OF PROTEST," "FACSIMILE PROPOSALS," "SYSTEM FOR AWARD MANAGEMENT – LEASING," "UNIQUE ENTITY IDENTIFIER," and "FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS – REPRESENTATION AND DISCLOSURES."

Solicitation / RFP / RFQ

This Request for Lease Proposals (RLP) solicits proposals for a lease of approximately 24,000 to 24,096 ANSI/BOMA Occupant Area (ABOA) square feet of contiguous space in Rio Rancho, New Mexico. The RLP outlines instructions and requirements for proposals, which will be evaluated to select an Offeror for award of a lease.

• Space Size: Minimum 24,000 to maximum 24,096 ABOA SF.

• Location: Area of Consideration bounded by King Blvd (North), Paseo Del Volcan (South), Center Blvd (East), and Unser Blvd (West).

• Building Quality: Modern, sound, and substantial construction with a facade of permanent materials in good condition. If not new, must have undergone or will complete modernization/adaptive reuse.

• Parking: 140 structured/inside or surface/outside parking spaces required for Government use, secured and lit.

• Roof Access: Potential requirement for roof space for antenna installation.

• Vending Facility: Approximately 250 ABOA SF for a vending facility.

• Unique Requirements: Within delineated area, security system requirements, and HVAC for medication cabinet and IT closet.

• Neighborhood & Amenities: Prime commercial office district or professional business park with well-maintained surroundings. Must have public sidewalks, and nearby employee services (restaurants, retail, banks). Transit accessibility with stops for two or more public bus/streetcar lines within 1,320 feet.

• Seismic Safety: Compliance with Seismic Standards is required. Offers must meet specific criteria or commit to retrofitting.

• Asbestos: Space must be free of asbestos-containing materials (ACM) or have undamaged, nonfriable ACM.

• Accessibility: Must meet Lease accessibility requirements or include commitment for improvements.

• Fire Protection & Life Safety: Must meet requirements for Means of Egress, Automatic Fire Sprinkler System, and Fire Alarm System, or include commitment for improvements.

• Energy Efficiency: Buildings generally require an ENERGY STAR® label, with specific exceptions and requirements for energy efficiency improvements.

• Environmental: No known hazardous conditions or environmental releases. Phase I Environmental Site Assessment (ESA) may be required.

• Lease Term: 10 Years, 5 Years Firm, with Government termination rights (90 days' notice).

• Occupancy Date: Not explicitly stated, but offers are due by 05/20/2026.

• Offers Due: 05/20/2026 by 4 PM PST via email to misty.pham@va.gov.

• Evaluation: Lease will be awarded to the responsible Offeror whose offer conforms to the RLP and is most advantageous to the Government, considering price and technical evaluation factors. Technical merit is more important than price.

• Key Evaluation Factors: Technical Quality (building design, layout, functionality), Offeror's Qualifications and Past Performance, Operations and Maintenance Plan, and Past Projects.

• NAICS Code: 531120 (Exception).

• Small Business: Size standard information is available via SBA website.

• HUBZone: HUBZone small business concerns may elect to waive the price evaluation preference.

• The RLP includes numerous attachments and forms that must be reviewed and submitted as part of the proposal.

• Offerors must examine the Lease template included in the RLP documents.

• The Government will award a Lease prepared by VA, incorporating the agreement of the parties.

Form / Attachment / Pricing Sheet

This document, titled "SECURITY UNIT PRICE LIST (FSL II)," is a pricing sheet intended for use by lessors to quote unit prices for security countermeasures. It aligns with the security requirements outlined in a lease and is to be used after award, with prices subject to negotiation prior to a 'Notice To Proceed.' The sheet facilitates the calculation of Building Specific Amortized Capital (BSAC) amounts.

• Security Unit Price List (FSL II): Contains line items for various security-related elements categorized under Facility Entrances, Lobby, Common Areas, Non-Public and Utility Areas; Interior (Government Space); Sites and Exterior of the Building; Security Systems; Structure; Operations and Administration; and Cybersecurity.
• Pricing Fields: Includes columns for 'Unit Price,' 'Quantity,' and 'Total.' Some items are marked as 'Priced in Shell,' 'Priced in Tenant Improvements,' or 'Government Provided,' indicating they should not be priced on this document but are included for alignment with full requirements.
• Instructions: Provides guidance for leasing specialists and lessors on how to complete the spreadsheet, including automatic calculation of totals and referencing other documents like the 'Security Standards' attachment and 'TICS' form.

This document is crucial for potential bidders (lessors) to understand the specific security features and associated costs that will be required as part of the lease agreement. It details the scope of security-related work and materials that need to be priced, influencing the overall bid and proposal preparation. Bidders must carefully review each item to ensure accurate pricing and compliance with the specified security requirements.

Form / Attachment / Pricing Sheet

This document is a GSA Lease Template (L100, Rev. 3/26) for a lease agreement. It outlines the terms and conditions for leasing space to the U.S. Government, specifically the Veterans Administration (VA).

• Lease Identification: Lease No. 36C24W25L0037.
• Parties: Lessor and The United States of America (acting by and through the VA).
• Premises: Details the leased space, including rentable square feet (RSF) and ANSI/BOMA Occupant Area (ABOA).
• Lease Term: Specifies the beginning of the term, duration, and firm term, subject to termination and renewal rights.
• Rent and Consideration: Outlines the structure of rent, including shell rent, operating costs, tenant improvements (TI) rent, Building Specific Amortized Capital (BSAC), and parking costs. It also details free rent periods and how rent is prorated.
• Termination and Renewal Rights: Defines the Government's rights to terminate the lease and options for renewal.
• Incorporated Documents: Lists various exhibits and documents that are part of the lease agreement.
• Construction Standards: Details requirements for work performance, building shell, and tenant improvements, including specific standards for materials, energy efficiency, and accessibility.
• Utilities and Services: Outlines the Lessor's responsibilities for providing utilities, HVAC, janitorial services, and other building services.
• Environmental and Safety: Includes sections on indoor air quality, radon testing, hazardous materials, mold, and occupant emergency plans.
• Additional Terms: Covers security requirements and modified lease paragraphs.

This document is crucial for potential bidders as it defines the comprehensive terms of the lease agreement. It details the physical space requirements, financial obligations (rent, TI, BSAC), construction standards, and ongoing service responsibilities. Bidders must understand these terms to accurately price their proposals and ensure compliance with all government requirements. The document serves as the foundational agreement for the leased space.

Form / Attachment / Pricing Sheet

This document is FAR 52.204-24, "Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (NOV 2021)". It requires offerors to represent whether they provide or use "covered telecommunications equipment or services" as defined in the provision. This representation is crucial for compliance with federal regulations, specifically Section 889 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019.

• Prohibition Overview: Details the restrictions on procuring or obtaining equipment, systems, or services that use covered telecommunications equipment or services as a substantial or essential component or as critical technology.
• Definitions: Clarifies terms such as "backhaul," "covered telecommunications equipment or services," and "critical technology."
• Offeror Representation: Requires offerors to state whether they will provide covered telecommunications equipment or services to the Government and whether they use such equipment or services in their operations.
• Disclosure Requirements: If an offeror represents that they will provide or do use covered telecommunications equipment or services, they must provide detailed disclosures, including:
  • Entity that produced the equipment.
  • Description of the equipment (brand, model, item description).
  • Explanation of the proposed use and its permissibility under the prohibition.
  • For services, the Product Service Code (PSC) and explanation of use.
• Exclusion List: Directs offerors to check the System for Award Management (SAM.gov) for excluded parties.
• Signature Block: Includes fields for the offeror or authorized representative to sign and date.

Bidders must carefully review this provision and accurately complete the representation and any required disclosures. Failure to comply may impact their ability to be considered for the award. This form directly addresses compliance with federal prohibitions related to telecommunications and video surveillance equipment, which is a critical factor in government contracting.

Forms / Attachments / Pricing Sheets

This document contains a series of seismic offer forms (A-F) and their accompanying instructions, intended for offerors to demonstrate seismic compliance for buildings associated with a Request for Lease Proposals (RLP).

• Forms A-D (Pre-Award):
  • Form A: Certificate of Seismic Compliance - Benchmark Building.
  • Form B: Certificate of Seismic Compliance - Existing Building.
  • Form C: Building Retrofit or New Construction Pre-Award Commitment (Parts 1 & 2).
  • Form D: Offeror's Representation of Exemption from Seismic Standards.
• Forms E-F (Post-Award):
  • Form E: Certificate of Seismic Compliance - Retrofitted Building.
  • Form F: Certificate of Seismic Compliance - New Building.
• Definitions: Clarifies terms such as 'Engineer,' 'ASCE/SEI 31,' 'ASCE/SEI 41,' 'Seismic Certificate,' and 'RP 8.'
• Instructions: Details which forms are applicable based on the building's status (existing, new, retrofitted) and whether it meets seismic standards or qualifies for exemption.

Offerors must use these forms to provide engineering certifications and commitments regarding the seismic compliance of the proposed building. The specific forms required will depend on the building's condition and the offeror's proposed approach to seismic standards. Failure to complete and submit the correct forms with required documentation may impact the offer's evaluation and award.

Form / Attachment / Pricing Sheet

This document, GSA Form 12000 (May 2015), is a "Prelease Fire Protection and Life Safety Evaluation for an Office Building." It is used to assess the fire safety and life safety features of a building where the government is considering leasing space.

• Part A: To be completed by the Offeror or their representative for spaces below the 6th floor. It includes questions on general building information, other uses in the building, automatic fire sprinkler systems, fire alarm systems, exit signs & emergency lighting, and elevators.
• Part B: To be completed by a professional engineer for spaces on the 6th floor or higher. It requires a detailed narrative report evaluating the entire building's fire safety, including general information, occupancy classifications, building construction, vertical openings, means of egress, automatic fire suppression systems, fire alarm systems, and elevators.
• Fundamental Code Requirements: Outlines the basis for evaluation, referencing the most recent edition of the building and fire code adopted by the jurisdiction, with specific reliance on NFPA 101, Life Safety Code for technical egress requirements.
• Offeror's Statement: A section for the Offeror to attest to the accuracy of the information provided.
• Statement of Fire Protection Engineer: A section for the professional engineer to attest to their assessment and findings.
• Offeror's Statement of Correction: A section for the Offeror to commit to correcting any deficiencies at their own cost.

Bidders must understand that this form is a critical component of the pre-lease evaluation process for office space. Depending on the floor level of the offered space, either Part A or Part B (or both) must be completed and submitted. The information gathered will directly impact the government's decision to lease the space. Offerors are responsible for ensuring the building meets the specified fire protection and life safety standards, and for addressing any deficiencies identified.

Form / Attachment / Pricing Sheet

This document, GSA Form 1217 (Rev. 11/2016), is the Lessor's Annual Cost Statement. It is used to collect estimated annual costs for services, utilities, and ownership expenses from lessors as part of the rental consideration for government leases. Bidders should use this form to detail their costs associated with providing the leased space.

Section I - Estimated Annual Cost of Services and Utilities:

• Cleaning, Janitor, and/or Char Service (Salaries, Supplies, Contract Services)
• Heating (Salaries, Fuel, System Maintenance and Repair)
• Electrical (Current, Bulb Replacement, Power for Special Equipment, System Maintenance and Repair)
• Plumbing (Water, Supplies, System Maintenance and Repair)
• Air Conditioning (Utilities, System Maintenance and Repair)
• Elevators (Salaries, System Maintenance and Repair)
• Miscellaneous (Building Engineer/Manager, Security, Social Security Tax, Workperson's Compensation Insurance, Lawn/Landscaping Maintenance, Other)

Section II - Estimated Annual Cost of Ownership Exclusive of Capital Charges:

• Real Estate Taxes
• Insurance (Hazard, Liability, etc.)
• Building Maintenance and Reserves for Replacement
• Lease Commission
• Management

Lessor's Certification: Requires the lessor to certify that the entered amounts represent their best estimate of annual costs.

This form is crucial for bidders to accurately calculate and present their proposed rental costs. It requires a detailed breakdown of expenses related to operating and maintaining the leased space, which will inform the overall rental rate proposed to the government. Bidders must complete this form to provide the necessary cost data for the government's evaluation.

Form / Attachment / Pricing Sheet

This document is "Exhibit F. Form 1364 Proposal to Lease Space (Jan. 2023)". It is a form intended for bidders to propose leasing space as part of a government opportunity.

• The form likely requires details about the proposed space, such as location, size, amenities, and lease terms.
• Specific instructions for completing and submitting this form are expected to be provided within the form itself or in related solicitation documents.

Bidders responding to opportunities involving the leasing of space will need to complete and submit this form as part of their proposal. Understanding and accurately filling out Form 1364 is crucial for a compliant and competitive bid.

Form / Attachment / Pricing Sheet

This document outlines the "Security Requirements - Facility Security Level II" for a government facility. It details the security obligations of the Lessor and the Government's rights concerning the leased space, focusing on physical security measures.

• Definitions: Clarifies terms like "Critical Areas" and "Design-Basis Threat (DBT)".
• Facility Entrances, Lobby, Common Areas, Non-Public, and Utility Areas: Covers employee access control, screening requirements, accommodation of mixed-use space, public restroom access, securing critical areas (mechanical, janitorial, electrical, telecom rooms, roofs), visitor access control, and restrictions for public spaces with vertical load members.
• Interior (Government Space): Addresses identity verification and formal key control programs.
• Sites and Exterior of the Building: Details requirements for signage, landscaping (to minimize concealment), HAZMAT storage, placement of receptacles/containers/mailboxes, and parking.
• Security Systems: Outlines requirements for testing, maintenance, Video Surveillance Systems (VSS), Intrusion Detection Systems (IDS), and Duress Alarms. It specifies whether the Lessor or Government provides, installs, and maintains these systems.
• Structure: Includes requirements for locking ground floor windows and protecting emergency generators and air intake grilles.
• Operations and Administration: Covers the Facility Security Committee, access to building information, and construction security plans.
• Cybersecurity: Prohibits connecting Building and Access Control Systems (BACS) to federal networks and outlines procedures for handling cybersecurity incidents, encouraging specific cyber protection measures.

This document is crucial for potential bidders to understand the security standards and physical security measures required for the facility. It details the Lessor's responsibilities in implementing and maintaining these security features, which may impact the overall cost and operational aspects of the lease. Bidders should pay close attention to the specific requirements for access control, surveillance, intrusion detection, and cybersecurity, as these will directly affect the design, construction, and ongoing management of the leased space.

Form / Attachment / Pricing Sheet

This document, titled "Agency Specific Requirements (ASRs) ", outlines specific requirements for the build-out of a new lease space. These ASRs are complementary to, more specific than, or more stringent than the minimum requirements found in the main Lease document.

• Section 1: Room Schedule and Details: Defines general requirements for interior tenant area build-out, referencing lease paragraphs for flooring, walls, doors, ceilings, lighting, electrical, data, and voice for both open office areas and enclosed rooms. Specific details are provided for electrical, data, and voice outlets, window coverings, and break room/kitchenette areas (if applicable).
• Section 2: Design Schematic Layout: Provides a representative layout for the space, including an adjacency diagram and a primary care module schematic. The Lessor is responsible for adapting these to meet government requirements.
• Section 3: Additional Special Requirements and Details: Covers room layouts and construction details, noting that these standards may be more stringent than those in the Lease document and will take precedence where specified.
• Section 4: General Requirements: Details specific security requirements (e.g., IDS, nurse call/panic buttons), information technology standards, and other requirements such as guest Wi-fi, negative pressure in biohazard storage rooms, and fixed patient mobility in procedure rooms.

This document is crucial for potential bidders to understand the detailed specifications and standards required for the construction and build-out of the leased space. It highlights specific government needs that may exceed standard lease terms, impacting project scope, materials, and overall cost. Bidders must carefully review these ASRs to ensure their proposals accurately reflect all mandated requirements.