ZDV CTRB Raised Floor

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide a new 18" high raised access floor system (approx. 2,982 SF) and SRG in the Control Wing Basement (B120A) at ZDV ARTCC (Denver). This includes the construction of two new ADA compliant ramps and stairs, and a new 9'-6" partition to enclose the area. An existing non-conforming east door will be removed and replaced within a new 2-hour rated alcove.

• General Conditions: Area cleanup throughout the project duration and final clean at project end.

• Selective Demolition: Removal of existing ramps, stairs, stair skirting, electrical components (outlets, switches, fixtures), central vacuum drops, fire alarm/strobes, the existing east door and frame, and portions of an existing partition.

• Metals: Installation of wall and floor mounted handrails at new stairs and ramps.

• Thermal and Moisture Protection: Fire stopping for penetrations at fire-rated partitions.

• Openings: Installation of a new east door and door frame, including new door hardware.

• Finishes: Construction of a 9'-6" high, 1-hour rated partition and a 2-hour rated alcove at the new east door. Installation of new rubber wall base. Installation of a complete raised access floor system with static dissipative rubber tiles and static dissipative carpet tiles. Construction of two ADA compliant ramps and one ADA compliant set of stairs with rubber flooring. Painting of existing columns and new partitions, with touch-ups on existing walls.

• Specialties: Relocation of two fire extinguishers and one AED to code-compliant heights.

• Electrical: Relocation of three power outlets, two light switches, four light fixtures, and one illuminated exit sign. Installation of two new wall-mounted light fixtures and one new illuminated exit sign.

• Communications: Installation of SRG under the raised access floor, including copper mats, perimeter grounding wire, and grounding to raised floor pedestals and the building, using smokeless exothermic welds.

• Electronic Safety & Security: Installation of a new fire detection alarm and strobe, and disconnection/reconnection of a key card reader and system at the new east door.

• Stakeholder coordination meetings.

• Adherence to JO3900.57A requirements.

• Work Request Review (WRR) submission and approval.

• Phased workplan submission.

• Submittal of cut sheets for all proposed materials/supplies/equipment.

• System component verification.

• Pre-construction meeting.

• Personnel vetting and screening for FAA facility access (REAL ID-compliant or DHS-accepted ID).

• FAA notification at least 24 hours prior to personnel arrival.

• Material compliance (low VOC/odor, FAA-approved).

• Discussion of potential equipment outages with System Support Centers (SSCs).

• Coordinate delivery, handling, and storage of materials.

• Conduct weekly progress meetings.

• Ensure construction activities do not impact ARTCC operations.

• Coordinate with FAA personnel for operation of circuit breakers, switches, and valves.

• Unauthorized work will not be paid for.

• Contractors must provide their own tools, materials, and safety equipment.

• Contractor personnel must be escorted by FAA representatives at all times.

• Protecting Government Property: Take precautions to protect existing facilities, equipment, and structures. Repair any damage at contractor's expense.

• Waste and Cleanup: Maintain a clean area during construction, perform final cleanup, and dispose of ACM and lead-containing materials per state and Environmental Occupational, Safety, and Health (EOSH) procedures. Provide an on-site dumpster.

• Regulatory Compliance: Comply with EPA, OSHA, Fire Marshal, NFPA regulations, FAA standards, Industry Codes, and local codes.

• Building and Electrical Codes: Adhere to latest building codes, NEC, ADA, and FAA specifications (FAA-STD-019x and FAA-C-1217H).

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for wage determination, specifically for building construction projects in Boulder County, Colorado. It outlines the prevailing wage rates and fringe benefits that must be paid to various construction laborers and mechanics on covered federal or federally assisted construction contracts.

• Applicable Executive Orders: Details the applicability of Executive Order 14026 and Executive Order 13658, outlining minimum wage rates for contracts entered into on or after January 30, 2022, or renewed/extended on or after that date, and for contracts awarded between January 1, 2015, and January 29, 2022.
• Wage Rates and Classifications: Provides a detailed list of construction classifications (e.g., Asbestos Worker, Carpenter, Electrician, Laborer, Painter, Plumber) along with their corresponding prevailing hourly wage rates and fringe benefits.
• Paid Sick Leave: References Executive Order 13706, which mandates paid sick leave for federal contractors.
• Appeals Process: Outlines the procedure for appealing wage determination decisions.

Bidders must review this document to understand the minimum wage and fringe benefit requirements for all laborers and mechanics employed on the construction project. This information is crucial for accurate cost estimation and proposal development to ensure compliance with federal labor standards. Failure to comply can result in penalties. The document also provides contact information for wage determination appeals and clarifications.

Form / Attachment / Pricing Sheet

This document is a Performance Bond (Standard Form 25, Rev. 8/2016) required for government contracts. It serves as a guarantee that the Principal (the contractor) will fulfill the terms and conditions of the contract. The bond ensures that if the Principal fails to perform, the Surety (the bonding company) will cover the government's losses up to the penal sum of the bond.

• Principal: Legal name and business address of the contractor.
• Surety(ies): Name(s) and business address(es) of the bonding company or companies.
• State of Incorporation: The state where the surety is incorporated.
• Penal Sum of Bond: The maximum amount the surety is liable for, expressed in words and numbers.
• Contract Date & Number: Details of the contract the bond is associated with.
• Obligation: Outlines the conditions under which the bond is void (i.e., if the Principal performs the contract and pays required taxes).
• Witness: Section for signatures and seals of the Principal and Surety(ies).

This form is typically provided by the government to the selected contractor. Bidders should be aware that a performance bond will likely be required upon award of a contract. The penal sum will be a percentage of the contract value. This document itself does not require action from potential bidders during the proposal phase but is a crucial administrative requirement for contract execution.

Form / Attachment / Pricing Sheet

This document is a Payment Bond (Standard Form 25A) required for government contracts. It serves as a guarantee that the contractor will pay all persons who have furnished labor or materials for the prosecution of the work under the contract.

• Principal: The legal name and business address of the contractor.
• Surety(ies): The name(s) and business address(es) of the surety company or companies providing the bond.
• Penal Sum of Bond: The maximum amount the surety is liable for.
• Contract Date & Number: Identifies the specific contract this bond is associated with.
• Obligation: States the surety's commitment to pay the penal sum.
• Conditions: Outlines when the bond becomes void (i.e., if the principal promptly pays all labor and material suppliers).
• Witness: Section for signatures of the Principal and Surety(ies).

This form is typically provided by the government to the selected contractor after award. Bidders may encounter this form as part of contract requirements or if they are acting as a surety. It ensures that subcontractors and suppliers are paid, mitigating financial risk for those parties involved in the contract.

Form / Attachment / Pricing Sheet

This document is an asbestos survey report for the Denver ARTCC (ZDV) located at 2211 17th Avenue, Longmont, Colorado. It was prepared by Terracon Consultants, Inc. for Parsons and the Federal Aviation Administration (FAA).

• The report details the findings of an asbestos survey conducted from April 29 to May 3, 2019.
• It identifies asbestos-containing materials (ACM) within the ARTCC Building and Power Service Building.
• No ACM was identified in the AAS Support Building, Engineering Trailer, Guard House, Pump House, or Storage Building.
• The document lists specific materials identified as asbestos-containing, their locations within the ARTCC Building, and estimated quantities.
• It also includes materials with less than 1% asbestos and materials assumed to contain asbestos until further analysis.
• Appendices provide detailed information on identified ACM, sample locations, licenses and certifications, photographs, drawings, and analytical laboratory data.

This document is crucial for any bidder involved in renovation or demolition activities at the Denver ARTCC. It identifies the presence, location, and estimated quantity of asbestos-containing materials, which will inform abatement strategies, safety protocols, and cost estimations for any work that may disturb these materials. Bidders must be aware of these findings to comply with all applicable federal, state, and local regulations regarding asbestos abatement.

Form / Attachment / Pricing Sheet

This document is a Lead-Based Paint Survey report for Room B120 at the Denver Air Route Traffic Control Center (ZDV ARTCC) in Longmont, Colorado. It details the findings of a survey conducted on January 9, 2025, to identify the presence or absence of Lead-based Paint (LBP) and Lead-containing Paint (LCP) for future operations and maintenance activities, including renovation and demolition.

• Executive Summary: Overview of the survey conducted by Leidos Corporation for the Federal Aviation Administration (FAA).
• Objective: To confirm the presence or absence of LBP and LCP in Room B120.
• Sampling Methodology: Use of a Niton handheld x-ray fluorescence (XRF) spectrum analyzer, following HUD accepted practices.
• XRF Results: Detailed findings of lead content in paint on various surfaces (doors, walls, columns, conduits, electrical panels), categorized as Lead-based Paint (LBP), Lead-containing Paint (LCP), or No Lead (Pb) in Paint.
• Conclusions and Recommendations: Compliance requirements according to OSHA and EPA rules for disturbing lead-based paint, including lead-safe work practices and training.
• Limitations: Acknowledges that the investigation cannot absolutely rule out LBP, especially in older facilities.
• Appendices: Include Facility Drawing, XRF Data Sheets, Photos, and Inspector Certification.

This report is crucial for any bidder involved in renovation, repair, or demolition activities within Room B120 of the Denver ARTCC. It identifies specific locations and components containing lead-based paint, which will necessitate specific safety protocols, waste disposal procedures, and potentially impact project timelines and costs. Bidders must be aware of these findings to accurately scope their work and ensure compliance with relevant regulations (OSHA, EPA).

Solicitation / RFP / RFQ

This solicitation is for a construction project estimated to be between $250,000.00 and $500,000.00. It is a competed Small Business Set-aside.

• The primary deliverable is related to "ZDV CTRB, Raised Floor" as specified in the Statement of Work (SOW).

• CLIN 00001 specifies a delivery timeframe of 30 days after Notice to Proceed (NTP).

• The contract performance period is 5 calendar days to begin performance and 30 calendar days to complete after receiving notice to proceed.

• Performance bond and payment bond requirements are included.

• Proposals are due by 4:00 PM CST on January 28, 2026.

• Proposals must be emailed to jason.m.perry@faa.gov.

• All questions are due by January 14, 2026, at 1600 CST.

• A site visit is scheduled for January 7, 2026, at 09:30 AM MST. RSVP is required by January 5, 2026, to Sean Sorensen at sean.sorensen@faa.gov.

• Award will be made to the lowest priced responsible offeror.

• This requirement is a competed Small Business Set-aside.

• The document includes numerous clauses related to contract administration, special requirements, inspection, delivery, packaging, and more. Key sections include Section B (Schedule), Section C (Description/Specifications), Section J (List of Documents), and Section L (Instructions to Bidders).

Forms / Attachments / Pricing Sheets

This document is an index of drawings for the "4 Channel Raised Floor & SRG" project at the Denver ARTCC. It lists all architectural drawings included in the set, providing a reference for the various components and plans related to the construction or renovation.

• Drawing Index: Lists drawing numbers and titles, categorized by discipline (Architectural).
• Key Plan & Project Location: Shows the overall site and location of the project.
• Revision History: Tracks changes and updates to the drawings.

This document serves as a table of contents for the technical drawings associated with the opportunity. Bidders will use this index to locate and understand specific details within the full set of drawings, which are crucial for accurately estimating costs, developing proposals, and understanding the scope of work. It helps in navigating the detailed plans for demolition, floor layouts, ceiling plans, finishes, and specific construction details like raised floors and signal reference grids.

Form / Attachment / Pricing Sheet

This document contains project specifications for the ZDV ARTCC (Denver Air Route Traffic Control Center) in Longmont, CO. It details the requirements for a "Four Channel Raised Floor & SRG" project.

• Project Identification: Denver Air Route Traffic Control Center (ZDV ARTCC), located at 2211 17th Ave., Longmont, CO, 80501.
• Owner: U.S. Department of Transportation, Federal Aviation Administration (FAA).
• Scope of Work: Includes demolition of existing ramps and steps, installation of a new raised floor system in the Four Channel Area (B120A), construction of two ADA accessible ramps, a set of steps, associated handrails and railings, and 9' high partitions. It also includes the installation of static dissipative carpet tiles and rubber tiles on the raised floor, and painting of new and existing partitions.
• Key Divisions Covered:
  • Division 01 – General Requirements (Summary, Work Restrictions, Submittal Procedures, Governmental Safety Requirements, Temporary Facilities and Controls, Closeout Procedures)
  • Division 02 – Existing Conditions (Selective Demolition)
  • Division 05 – Metals (Pipe and Tube Railings)
  • Division 07 – Thermal and Moisture Protection (Penetration Firestopping, Joint Firestopping)
  • Division 08 – Openings (Hollow Metal Doors and Frames, Door Hardware)
  • Division 09 – Finishes (Non-Structural Metal Framing, Gypsum Board, Resilient Base and Accessories, Resilient Tile Flooring, Static-Control Resilient Flooring, Tile Carpeting, Interior Painting)
  • Division 26 – Electrical (Raceways and Boxes for Electrical Systems, Wiring Devices, LED Interior Lighting, Emergency and Exit Lighting)
  • Division 27 – Communications (Grounding and Bonding for Communications Systems)
  • Division 096900 – Access Flooring
• Compliance: Work must comply with the 2024 International Building Code (IBC-2024) and NFPA 101.
• Contract Type: Single prime contract.
• Access to Site: Limited use of the Project site at ZDV is permitted. Contractor must coordinate access and operations with the COR.
• Safety: Contractor must ensure all construction debris, tools, and materials are secured and the job site is kept clean.
• Coordination: Extensive coordination with the COR and FAA personnel is required due to the facility being a 24-hour operation.

This document outlines the technical specifications and requirements for the "Four Channel Raised Floor & SRG" project at the Denver ARTCC. Bidders need to review these specifications to understand the scope of work, materials, installation methods, safety requirements, and compliance standards to accurately prepare their proposals and assess their capability to perform the work.

Form / Attachment / Pricing Sheet

This document is a "Project Offeror Experience Information" form to be completed by offerors. It is intended to gather details about past projects to assess offeror experience, likely as part of the evaluation criteria for minimum project value and recency, as referenced in Sections L and M of the SIR Document.

• Offeror Information: Company Name, Address, POC Name, Phone, Email.
• Contract Details: Contract/Task Order/Purchase Order Number, Contract/TO/PO Dollar Value.
• Project Status: ACTIVE (Estimated Completion Date) or COMPLETED (Completion Date).
• Project Identification: Project Title, Project Location.
• Project Description: A detailed explanation of the offeror's role and specific responsibilities.
• Client Information: Project Owner or Project Manager for the Client, including Government Entity or Company Name, Address, Telephone Number, and E-mail.

Bidders must complete this form accurately to provide evidence of their relevant project experience. The information submitted will be used to evaluate their qualifications against the minimum project value and recency criteria specified in the solicitation. Failure to provide complete and accurate information may impact the evaluation of the offeror's proposal.