Zirconium Hydride

Form / Attachment / Pricing Sheet

This document is a price sheet associated with Solicitation W519TC-26-Q-ZHYD. It is intended for offerors to provide their unit pricing for the CLINs listed.

• CLIN 0001 - FAT: Requires pricing for 10 Pounds.
• CLIN 0002, 0002A, 0002B, 0002C, 0002D: These CLINs are listed with Units of Measure as Pounds, but no quantities are specified, and all Unit Prices are listed as 0.0.
• Total Evaluated Price: The total is listed as 0.0.

Bidders should use this sheet to enter their proposed unit prices for CLIN 0001. The structure for other CLINs is provided, but specific quantities and pricing are not detailed in this attachment, with all listed unit prices currently at 0.0.

Form / Attachment / Pricing Sheet

This document is a standard Federal Acquisition Regulation (FAR) clause (52.223-3) titled "Hazardous Material Identification and Material Safety Data." It outlines the requirements for offerors and contractors regarding the identification and submission of data for hazardous materials to be delivered under a contract.

• Definition of Hazardous Material: Refers to the latest version of Federal Standard No. 313.
• Offeror Requirement: Offerors must list any hazardous material to be delivered, including its identification number (e.g., National Stock Number, Special Item Number). This information must also be on the Material Safety Data Sheet (MSDS).
• Contractor Requirement: The list must be updated during contract performance if new hazardous materials are identified.
• MSDS Submission: The apparently successful offeror must submit MSDSs meeting specific requirements (29 CFR 1910.1200(g) and Federal Standard No. 313) prior to award. Failure to do so may result in the offeror being deemed nonresponsible and ineligible for award.
• Post-Award Changes: Contractors must notify the Contracting Officer and resubmit data if changes occur that render submitted data incomplete or inaccurate.
• Government Rights: The Government has rights to use, duplicate, and disclose the submitted data for safety and medical purposes.
• Alternate I: Requires contractors to submit MSDSs with shipments or in advance, as authorized by the Contracting Officer, and specifies how to handle MSDSs for items shipped to consignees (with packing lists or affixed to containers).

Bidders must understand and be prepared to comply with these requirements. This includes identifying any hazardous materials in their proposed offering and being ready to submit the necessary MSDSs. Failure to comply with these requirements prior to award can lead to disqualification. Bidders should factor the effort and cost associated with MSDS preparation and submission into their proposals.

Form / Attachment / Pricing Sheet

This document, MIL-Z-21353 (Nord), is a military specification that establishes the requirements for powdered zirconium hydride intended for use in military pyrotechnics. It details the classification, applicable documents, material requirements, quality assurance provisions, and preparation for delivery.

• Scope: Covers powdered zirconium hydride for military pyrotechnics, specifying one grade and one class.
• Applicable Documents: Lists federal and military specifications and standards related to packaging, marking, and testing.
• Requirements: Defines chemical requirements (Zirconium plus Hafnium, Hydrogen) and physical requirements (average particle diameter < 10 microns).
• Quality Assurance: Outlines supplier responsibilities for inspection, lot definition, sampling, chemical tests (zirconium-hafnium content, hydrogen), physical tests (particle diameter), and acceptance criteria.
• Preparation for Delivery: Specifies packaging and packing requirements for different levels (A, B, C), including unit packaging (25 lb drums), intermediate packaging, cushioning, and exterior containers (wood boxes).
• Marking: Details special markings (e.g., "CAUTION: REACTS EXPLOSIVELY WITH WATER") and normal markings according to MIL-STD-129 and CFR 71-78.
• Notes: Includes intended use and definition of a batch.

This specification is crucial for any bidder intending to supply zirconium hydride for military pyrotechnics. It provides the definitive technical requirements, testing procedures, and packaging/marking standards that must be met for acceptance. Bidders must ensure their product and proposed packaging/shipping methods comply with all aspects of this document.

Form / Attachment / Pricing Sheet

This document outlines the technical specifications, packaging requirements, and quality assurance provisions for Zirconium Hydride. It serves as a critical attachment for bidders to understand the material's required properties and how it must be prepared for shipment.

• Domestic Production: Zirconium Hydride must be produced domestically. Bidders must cite domestic production and provide a supply chain map; failure to do so will result in automatic unacceptability.
• Material Specifications:
  • Must meet chemical and physical requirements of MIL-Z-21353.
  • Chemical Requirements: Zirconium (Zr) + Hafnium (Hf) >= 95.5%; Hydrogen (H) 1.85-2.10%.
  • Physical Requirements: Average particle diameter < 10 microns (measured by Fisher Subsieve Sizer).
  • Additional Chemical Requirements: Trace materials (Hf, Fe, Si, Cr, Cl) must meet specified limits.
• Testing & Verification:
  • Contractors must perform required tests unless otherwise specified.
  • Alternative testing methods require government approval (CAAA).
  • Government may verify APD of submitted samples.
  • A Certificate of Analysis is required for each lot.
  • A 10-pound first article sample is required prior to full lot shipment.
  • Government sampling upon receipt: 3 containers per lot, tested separately; failure leads to lot rejection.
• Packaging Requirements:
  • Max 20 lbs per container.
  • Tin-plated steel, unlined, suitable for hazardous materials.
  • Specific container body, ring, and bottom thickness requirements.
  • Secondary seal required.
  • Containers placed in 3 mil waterproof polyethylene sealed bags.
  • Bags placed into UN-rated fiberboard cartons (6 7/8 x 6 7/8 x 7 7/8 inches).
  • Labeled as a Flammable Solid per DOT provisions.

Bidders must ensure their proposed Zirconium Hydride meets all specified chemical, physical, and testing requirements. Compliance with domestic production mandates, supply chain mapping, and detailed packaging instructions is essential for proposal acceptance and successful contract performance. Failure to adhere to these technical and packaging specifications will render a bid unacceptable or lead to rejection of delivered material.

Form / Attachment / Pricing Sheet

This document outlines specific questions related to the technical requirements and proposed schedule for Zirconium Hydride (ZrH2) procurement under solicitation W519TC-25-Q-ZHYD. It serves as a detailed questionnaire for bidders to address their capabilities and plans.

Technical Requirements & Compliance:

• Domestic Production: Confirmation of domestic sourcing for ZrH2 and its components, with a required supply chain decomposition map.
• Material Specifications: Verification of ZrH2 meeting MIL-Z-21353 requirements, including:
  • Percentage of Hydrogen and analysis method.
  • Percentage of Zirconium and Hafnium and analysis method.
  • Average particle diameter (< 10 microns) and analysis method (MIL-STD-1233).
• Trace Elements: Ability to provide quantifiable data for Iron (Fe), Silicon (Si), Chromium (Cr), and Chlorine (Cl) with specified maximum percentages, and the analysis methods to be used.

Packaging Requirements:

• Quantity per Container: Ability to package no more than 20 pounds of ZrH2 per container.
• Inner Pack: Requirements for unlined, tin-plated steel containers (85-gauge body/ring, 75-gauge bottom) with a secondary seal, placed in a 3 mil waterproof polyethylene sealed bag.
• Outer Pack: Requirements for fiberboard cartons (6 7/8 X 6 7/8 X7 7/8 inches) with a UN rating of 4G/Y7.5S, labeled as a Flammable Solid per DOT provisions.

Schedule & Milestones:

• First Article Test (FAT): Proposed schedule (Gantt chart) for delivery of 10 pounds of FAT from contract award.
• Production Quantity: Proposed delivery schedule (Gantt chart) for 2,216 pounds after FAT approval.

Bidders must carefully review and respond to each question to demonstrate their capability to meet the technical specifications, domestic sourcing requirements, packaging standards, and delivery timelines for Zirconium Hydride. Failure to address these points may impact proposal evaluation and award.