ZOA ARTCC Replace Security Fence

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the "ZOA ARTCC Replace Security Fence" opportunity.

• Licensing Requirements: The primary question concerns whether a specialized CSLB C-13 (Fencing Contractor) license is required, or if a CSLB Class B (General Building Contractor) license would suffice.
  • Answer: FAA ORDER 1600.69D (security order for fencing) and FAA-STD-19G (bonding grounding) are relevant. The sufficiency of a CSLB Class B license depends on whether the gates are manually operated or mechanized. A Class B license is sufficient for manually operated gates.

This clarification is relevant for bidders to ensure they possess the correct licensing to meet project requirements.

Solicitation / RFP / RFQ

This solicitation is for the "ZOA ARTCC, Replace Security Fence" project. The estimated value is between $100,000 and $250,000.

• Replacement of the security fence at ZOA ARTCC.

• Performance period is 30 calendar days after Notice to Proceed.

• Contract type: Firm Fixed Price.

• Period of Performance: 30 calendar days after Notice to Proceed.

• Proposals are due by 3:00 PM Local Time on March 6, 2026.

• Offers must be submitted electronically via email to Samantha.A.Pearce@faa.gov.

• Evaluation will be based on the lowest price technically acceptable proposals. Tradeoffs are not permitted.

• Proposals must be complete and accurate to be considered.

• NAICS Code: 238990 - All Other Specialty Trade Contractors.

• Small business size standard: Annual average receipts not to exceed $19M.

• A site visit is scheduled for February 10, 2026, at 10:00 AM Local Time at 5125 Central Avenue, Fremont, CA 94536. Advance notice is required.

• Offerors must be registered in the System for Award Management (SAM) prior to award.

• A proposal guarantee of 20% of the proposal price is required.

• Performance and Payment Bonds are required, covering 100% of the awarded contract price, due within 15 calendar days of award.

Statement of Work (SOW) / Performance Work Statement (PWS)

To furnish all labor, equipment, materials, and supervision for the demolition and installation of a new security fence at the Oakland ARTCC (ZOA) facility.

• Demolish and dispose of approximately 1120 linear feet (LF) of existing seven- to ten-foot-high Chain Link Security Fencing along the East side of the Oakland ARTCC Property line.

• Remove existing ground wires and Perimeter Intrusion Device wires from the existing fence for reuse on the new fence. Grounding and re-installation of the Perimeter Intrusion Device wiring are not part of this contract.

• Install approximately 1120 LF of new 12-foot-high Chain Link Security Fencing along the East side of the Oakland ARTCC Property line.

• The new fencing will include three strands of barbed wire above the 12-foot-high security fence.

• Install two four-foot wide by seven-foot high swing gates at locations determined by the COR.

• The demolition and replacement will be phased to maintain perimeter security, with segments not exceeding 200 LF. Temporary security measures are required.

• Fencing materials and installation must comply with specified ASTM standards, FAA Orders (e.g., FAA Order 1600.69D), and Federal Specifications.

• Workmanship must be of professional quality.

• Site must be kept clean and orderly, with all debris removed.

• Work Location: East Property Line of the Oakland ARTCC, 5125 Central Avenue, Fremont, CA 94536.

• Work shall not start before issuance of the Notice to Proceed (NTP) and must be completed within the performance period defined in the Contract Award.

• Access to the site requires coordination and adherence to security regulations, including potential searches and valid government-issued REAL ID.

• Contractor must provide a Safety Plan, trained personnel, and Material Safety Data Sheets (MSDS).

• Work hours are limited to normal business hours (6:00 AM - 4:30 PM, Monday-Friday) unless coordinated with the COR.

• No government-furnished material will be provided.

• A pre-proposal site visit is highly recommended.

Form / Attachment / Pricing Sheet

This document is a Performance Bond form (FAA Form 4400-63) authorized for use in connection with Government contracts. It serves as a guarantee that the Principal (the contractor) will fulfill all terms and conditions of the contract and pay any applicable taxes imposed by the government under the Miller Act.

• Principal Information: Requires the legal name and business address of the contractor.
• Surety Information: Requires details of the corporate or individual surety(ies) providing the bond, including their names, addresses, and liability limits. The form accommodates multiple corporate sureties.
• Organization Type: Specifies whether the Principal is an individual, partnership, joint venture, or corporation.
• Bond Details: Includes fields for the contract date, date the bond is executed, contract number, and the penal sum of the bond (the maximum amount the surety is liable for).
• Obligation and Conditions: Outlines the Principal's and Surety's commitment to perform the contract and the conditions under which the bond becomes void.
• Signatures and Seals: Requires signatures from the Principal and Surety(ies), along with corporate seals where applicable.

Bidders may be required to provide this performance bond as part of their contract award. This form outlines the information needed to complete the bond and the obligations it entails. It is crucial for understanding the surety requirements and ensuring compliance with contract terms.

Form / Attachment / Pricing Sheet

This document is a Payment Bond (FAA Form 4400-61) used to protect persons supplying labor and material for a federal contract. It ensures that the Principal (the contractor) will promptly pay for all labor, materials, and supplies furnished in the prosecution of the work.

• Principal: The legal name and business address of the contractor.
• Surety(ies): The name and business address of the surety company or companies providing the bond.
• Penal Sum of Bond: The maximum amount the surety is liable for.
• Date Bond Executed: Must not be later than the contract date.
• Type of Organization: Indicates if the Principal is an Individual, Joint Venture, Partnership, or Corporation.
• State of Incorporation: Relevant for corporate entities.
• Bid Identification: Includes the Bid Date and Invitation Number.
• Obligation: Details the binding agreement between the Principal, Surety(ies), and the United States of America.
• Conditions: Outlines the circumstances under which the bond is void (i.e., if the Principal makes prompt payment).

Bidders may need to complete and submit this form as part of their bid or proposal, or it may be a requirement for the awarded contract. It outlines the financial security required for labor and materials, which is a standard component of many federal construction and supply contracts. The form requires specific information about the Principal and the Surety, including their legal names, addresses, and the bond amount.

Form / Attachment / Pricing Sheet

This document is a Bid Bond form (FAA Form 4400-39) used to ensure that a bidder will enter into a contract if their bid is accepted. It serves as a guarantee from the bidder (Principal) and their surety that they will execute the contract and provide any required bonds if awarded.

• Principal: Information about the bidder submitting the bid.
• Surety(ies): Information about the surety company providing the bond.
• Penal Sum of Bond: The maximum amount the surety is liable for, typically a percentage of the bid price.
• Bid Date & Invitation No.: Identifies the specific solicitation.
• Obligation: Outlines the conditions under which the bond is valid, primarily requiring the Principal to enter into a contract upon acceptance of their bid.
• Conditions: Specifies that the bond is void if the Principal executes the contract and provides required bonds, or if the Principal fails to do so, the surety may be liable for the excess cost of procuring the work.
• Execution: Sections for signatures of the Principal and Surety(ies).

Bidders are required to complete and submit this form as part of their bid package for certain solicitations. It demonstrates financial commitment and assures the government that the bidder is prepared to enter into a contract if awarded. Failure to submit a proper bid bond, where required, can lead to bid disqualification.

Form / Attachment

This document is an Organizational Experience Questionnaire (OEQ) designed for contractors to provide detailed information about their relevant past project experience. The form is structured to capture details for at least two projects, labeled "Project 1" and "Project 2", suggesting that bidders may need to submit information for multiple past efforts.

The OEQ requires the contractor to provide the following information for each project:

• Contractor's name and address.
• Contract/Task Order (TO)/Purchase Order (PO) number, total dollar value, and current status (Active or Complete) along with the completion date (including extensions).
• The project's title and location.
• A comprehensive description of the contractor's specific role and responsibilities during the project's performance.
• Contact details for the Project Owner or Project Manager from the client, including their name, address, telephone number, and email.

Bidders must complete this Organizational Experience Questionnaire for each project they intend to submit as evidence of their organizational capabilities. This form is a critical component for demonstrating the bidder's qualifications and experience, and it will be used in the source selection process for the "ZOA ARTCC Replace Security Fence" opportunity (6973GH-26-R-00021), as indicated by its "SOURCE SELECTION SENSITIVE" designation.

Other / Unclassified

This document is a "General Decision Number" (CA20260018) dated 01/23/2026, which supersedes a previous decision (CA20250018). It outlines prevailing wage rates for various construction trades within the state of California, specifically for "Building Construction Projects," "Dredging Projects" (excluding hopper dredge work), "Heavy Construction Projects" (excluding water well drilling), and "Highway Construction Projects." The document details different "Modification Numbers" with corresponding "Publication Dates" from January 2, 2026, to January 23, 2026.

It lists specific wage and fringe benefit rates for various trades, including Asbestos Removal Workers/Hazardous Material Handlers, Asbestos Workers/Insulators, Boiler Makers, Marble Finishers and Masons, Bricklayers, Terrazzo Finishers and Workers/Setters, Tile Finishers and Layers, Carpenters (various specialties), Divers, Piledrivers, Sheet Metal Workers, Sprinkler Fitters, and various Laborer classifications (e.g., Construction Craft Laborers, Gardeners, Gunite, Wrecking). It also includes wage rates for Electricians, Ironworkers, Painters, Plasterers, Plumbers, Roofers, and Truck Drivers, categorized by specific counties or regions within California.

This document is crucial for any bidder on federal or federally-assisted construction projects in California that are subject to the Davis-Bacon Act. It establishes the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on such projects. Bidders must consult this document to ensure their cost proposals and labor practices comply with federal wage laws, which is a critical component of bid preparation and contract compliance.