631-26-010 Abate and Upgrade Building 1 Common Area

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work outlines the requirements for the abatement and upgrade of common areas within Building 1 at the Edward P. Boland Medical Center Campus.

• Demolition of ACM flooring.

• Removal of wall coverings, potentially including lead.

• Removal of existing storefront assemblies.

• Resurfacing and painting of walls.

• Installation of new flooring and base.

• Installation of new accessories (e.g., wall protection, handrails, corner guards).

• Construction of partition walls to replace storefronts.

• All work must meet VHA, OSHA, EPA, DLS, and MassDEP standards.

• Design and installation must meet the latest edition of the NEC, NFPA, and applicable building codes.

• Contractor must comply with Massachusetts DEP and DLS regulations, and OSHA codes.

• Specific infection control measures must be followed as per the "Construction Specifications for Infection Control."

• Location: Building 1, Edward P. Boland Medical Center Campus, Leeds, MA 01053.

• Work hours are generally 17:00-6:00 Monday-Friday and 06:30-18:30 Saturday-Sunday, with off-hours work required to avoid interrupting hospital operations. Written COR approval is needed for exceptions.

• Project includes 90 calendar days for administrative tasks (preconstruction submissions) prior to the period of performance.

• Period of Performance: 540 days after receipt of Notice to Proceed (NTP).

• Contractor must coordinate with the Project Engineer/Manager (COR) to review methods, plans, infection control, interim life safety, and permit requirements before starting field work.

• Contractor is responsible for obtaining all necessary permits (City of Northampton, MA DEP).

• Field work must be scheduled at least 72 hours in advance with VA Facilities Management.

• Site must be left clean of construction debris and hazardous materials.

• Contractor must obtain a contractor badge, have a negative TB test, wear clear face shields/safety glasses in patient areas, and receive an annual influenza shot.

• Specific submittals are required, including Bonds, Certificates of Insurance, Project Schedule, Accident Prevention Plan, Asbestos Hazardous Abatement Plan, and Safety Data Sheets (SDS).

• Penetrations of fire and smoke barriers require prior approval from FMS via the COR and subsequent repair and inspection.

• Interim life safety measures and fire protection plan must be implemented.

• Parking is restricted and controlled; contractor parking is only in designated areas.

• Storage of equipment and materials is limited; contractor must arrange with COR and schedule deliveries to minimize on-site storage.

• Debris must be removed daily and disposed of according to regulations.

• Site utilities must be verified, and any necessary relocations, reallocations, or shutdowns require COR approval at least 14 days in advance.

• All materials and workmanship must comply with codes, standards, and AHJ requirements.

Specifications / Other

This document contains a table of contents for "VHA MASTER SPECIFICATIONS" for "Section 00 01 10" and "Section 01 00 00 - GENERAL REQUIREMENTS". It outlines various divisions and sections related to general requirements for construction projects, including:

• Division 01 - General Requirements: Covers project schedules, submittals, safety, quality control, construction waste management, and sustainable construction requirements.
• Division 02 - Existing Conditions: Details demolition, asbestos abatement, and lead-based paint removal.
• Division 05 - Metals: Includes cold metal forming framing.
• Division 07 - Thermal and Moisture Protection: Covers joint sealants.
• Division 08 - Openings: Pertains to hollow metal doors and frames, storefronts, and door hardware.
• Division 09 - Finishes: Includes subsurface preparation for floor finishes, non-structural metal framing, gypsum board, wall refinishing, resilient base and accessories, resilient tile flooring, terrazzo floor tile, carpeting, and painting.
• Division 10 - Specialties: Covers wall and door protection.

This document serves as a comprehensive index and guide to the specifications for the project, detailing the various sections and their content relevant to construction and renovation work.

Forms / Attachments / Pricing Sheets

This document contains architectural drawings and details for the "Building 1 Abate and Upgrade Common Areas" project at the VA Central Western Massachusetts Healthcare System. It outlines the scope of work for abatement, demolition, and finishing of common areas within Building 1.

• Cover Page (G1001): Project overview, sheet index, and project information.
• General Notes (G1002): Details on demolition, hazardous material abatement (including asbestos and lead paint), and general finishing requirements.
• Demolition & Hazmat Abatement Plans (AD-HA101, AD-HA102): Floor plans indicating areas for demolition and hazardous material abatement, with specific notes on removing wall coverings, flooring, and base materials.
• Finish Plans (ID101, ID102): Floor plans detailing the proposed finishes for various areas, including flooring types (LVT, carpet tile, terrazzo) and wall protection.
• Finish Schedule & Details (ID601): Comprehensive schedule of finishes, including material specifications, manufacturers, colors, and sizes for base, flooring, wall covering, handrails, and corner guards. Also includes abbreviations and floor pattern details.
• Details (ID701, ID702): Architectural details for wall construction, door frames, temporary partitions, and general elevations.

This document is critical for bidders to understand the physical scope of work, including the extent of demolition, hazardous materials requiring abatement, and the specific finishes to be installed. It provides the detailed plans and specifications necessary for accurate bidding on the abatement, demolition, and renovation aspects of the project.

Solicitation / RFP / RFQ

This document is a Justification for Single Source Award for Simplified Acquisition Procedures (SAP) under the SAT (not exceeding $350K). It supports the procurement of specific construction materials for the "Abate and Upgrade Common Areas Building 1" project at the VA Medical Center Leeds, MA. The procurement is for a portion of the construction materials needed to accommodate standardization of items throughout the facility.

The document lists specific interior finish materials for main corridors, including:

• Nurazzo (true epoxy-based terrazzo)
• MAIPEI Kerapoxy CQ (two-component epoxy grout and mortar)
• INPRO IPC Rigid Vinyl Sheet and associated Top Cap
• EnviroGT G2-150D End Wall Protector
• INPRO Handrails 3500 SRV (silhouette handrail system)
• INPRO Corner Guards
• Tarkett Johnsonsite Wall Base

These products are specified to match existing finishes in the new wing and main entrance/corridor of Building 1 to establish a cohesive look and assist with wayfinding. The use of these specific products ensures compliance with previously approved VA standards and design guides.

The estimated value of these products is not anticipated to exceed the simplified acquisition threshold. The procurement plan is to utilize the VISN 1 Construction MATOC, which has multiple general contractors.

Market research was conducted on various suppliers for the products requested. The procurement package includes a detailed independent government cost estimate for fair and reasonable determination. The Contracting Officer certifies that the justification is accurate and complete, and that the brand name items are subsequent components to the overall construction project, which will be competed based on competition.

Not explicitly stated, but the document mentions the procurement will be competed.

This justification is for other than full and open competition for specific construction materials. The Contracting Officer's Certification confirms approval in accordance with FAR 6.103-1(b).

Solicitation / RFP / RFQ

This solicitation is for the "Abate and Upgrade Building 1 Common Area" project at the VA Medical Center (VAMC) Leeds. The project involves demolition and removal of existing structures to abate and upgrade common areas within Building 1. The estimated magnitude of construction is between $2,000,000 and $5,000,000.

• Demolition and removal of existing structures.

• Abatement and upgrade of common areas in Building 1.

• Compliance with applicable specifications and drawings (provided electronically).

• Adherence to Construction Wage Rate Requirements (General Decision MA20260003).

• Commencement of work within ten (10) calendar days of Notice to Proceed.

• Completion of work within five hundred and forty (540) calendar days.

• Contract Type: Task Order under VISN 1 Construction MATOC.

• Period of Performance: 540 calendar days from Notice to Proceed.

• Estimated Value: $2,000,000 - $5,000,000.

• Proposal Due Date/Time: 05/18/2026 at 1:00 PM EST.

• Proposal Evaluation Factor: Price Only.

• Submission Method: Via the Vendor Portal (NO HARD COPY PROPOSALS OR FACSIMILES WILL BE ACCEPTED).

• Offer Acceptance Period: Offerors must provide at least 120 calendar days for Government acceptance.

• This solicitation is exclusively for eligible VISN 1 Construction MATOC vendors.

• Task Orders are 100% set aside for verified Service-Disabled Veteran Owned Small Businesses (SDVOSBs).

• Offerors must comply with VAAR 852.219-75 VA Notice of Limitations on Subcontracting for General Construction (not more than 85% of the amount paid to firms not certified SDVOSBs/VOSBs).

• A site visit is scheduled for 04/22/2026 at 11:00 AM EST.

• Request for Information (RFI) Due Date/Time: 04/29/2026 at 1:00 PM EST.

• RFIs must be submitted through the Vendor Portal.

• Performance and Payment Bonds are required for awards over $150,000.

• Bid Bonds are required.

• Contractors must comply with personal identity verification requirements for VA personnel.

• Applicable specifications, drawings, and Statement of Work are provided as attachments.

Other / Unclassified

This document is a General Decision for building construction projects in Massachusetts, issued by the U.S. Department of Labor. It provides prevailing wage rates and fringe benefits for various construction trades across multiple counties.

This document is crucial for any bidder on a federal construction project in the specified areas of Massachusetts. It outlines the minimum wage and fringe benefit rates that must be paid to laborers and mechanics employed on the project, as required by the Davis-Bacon Act. Bidders must use this information to accurately estimate labor costs and ensure compliance with federal labor laws when preparing their proposals. The document details rates for trades such as Insulator/asbestos worker, Boilermaker, Bricklayer, Carpenter, Electrician, Elevator Mechanic, Floor Layer, Glazier, Ironworker, Laborer, Marble Finisher, Millwright, Painter, Plumber and Steamfitter, Roofer, Sheet metal worker, Sprinkler Fitter, and Truck drivers. It also includes important footnotes regarding paid holidays, vacation, and specific Executive Orders related to paid sick leave and minimum wage for federal contractors.

Form / Attachment / Pricing Sheet

This document is an itemized cost breakdown spreadsheet, designed to capture detailed cost information for the "Base Offer." It is intended for bidders to use in detailing their proposed costs for the opportunity.

• Base Offer Cost Breakdown: This section requires the breakdown of costs by CSI (Construction Specifications Institute) divisions, from Division 1 (General Requirements) through Division 34 (Transportation). It includes fields for Labor Cost, Material Cost, and Total Cost for each division.
• Subtotals: Provides subtotals for divisions, overhead, profit, and bond percentages.
• Total Base Offer Cost: The final sum of all costs.
• Labor Detail Sheet: Allows for a breakdown of labor costs by division, labor category, labor rate, hours, and total cost.
• Materials and Equipment Details Sheet: Allows for a breakdown of material and equipment costs by division, item, rate, units, and total cost.

Bidders must use this spreadsheet to provide a comprehensive and itemized cost proposal. The detailed breakdown by division and cost type (labor, material, equipment) is crucial for the government's evaluation of the offer. Accurate completion of all sections, including the labor and materials/equipment details, is required.