9mm Pistol Caliber Carbine Rifle and Accessories

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the "9mm Pistol Caliber Carbine Rifle & Accessories" solicitation (Solicitation #70US0926R70093557).

• Magazine Compatibility: The weapon magazine well must be compatible with Glock magazines, as per SOW requirement 2.9.11.
• Sample Submission: Physical samples are not required for testing at this time; the solicitation due date is February 27, 2026, at 4:00 PM EST.
• Integral Suppression: Integral suppression is not acceptable.
• Quality Management System (QMS): QMS information must be submitted both within the Technical Volume and as a separate document.
• Maintenance Documentation: Maintenance documentation (schedule, operator manual, armorer manual) is required separately from the presentation. The government prefers a hard copy for the maintenance presentation.
• Overall Length: The 23" collapsed length requirement does not include the muzzle device.
• Barrel Length: The required barrel length is 6.0-8.0 inches, and amendments to this specification are not permitted.
• Stock Configuration: The same stock on the lower receiver will be used for both the full-size PCC and PDW. The requirement is for 5 full-size PCC firearms and 5 PDW upper receivers.
• Suppressor Mounting: The suppressor can be mounted under the handguard. Overall length is measured to the end of the handguard or barrel, whichever protrudes farthest.
• Operating System: A "Mechanically Delayed Operating System" is required. Simple blowback or straight blowback systems will not be acceptable. The government will not accept proprietary bolt designs that deviate from this requirement.
• Manuals: Commercial owner's manuals are acceptable if they contain all requested information.

These clarifications address specific requirements related to magazine compatibility, QMS submission, documentation formats, physical dimensions, operating systems, and acceptable components. Bidders should ensure their proposals and technical submissions align with these clarified details.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the "9mm Pistol Caliber Carbine Rifle & Accessories" solicitation (Solicitation #70US0926R70093557).

• Magazine Compatibility: The weapon magazine well must be compatible with Glock magazines, as per requirement 2.9.11 in the SOW. Use of MPX magazines or other solutions is not specified as acceptable.
• Physical Samples for Testing: Physical samples are due by February 27, 2026, at 1600 EST.
• Integral Suppression: Integral suppression is not acceptable.
• Quality Management System (QMS) Submission: QMS information must be submitted both within the Technical Volume and as a separate document.
• Maintenance Documentation: Maintenance schedule, operator manual, and armorer manual are separate documents from the maintenance presentation. The Government prefers a hard copy for the maintenance presentation.
• Overall Length: The "Overall Length" of 28.00 inches (maximum, w/stock assembly fully extended) and 23.00" (collapsed) does not include the muzzle device.
• Barrel Length: The barrel length must be between 6.0-8.0 inches, as stated in SOW 2.10.17.5. An amendment to allow 5.85-8.00 inches is not being considered.

These clarifications do not appear to alter the solicitation's due date or submission requirements, but they provide critical details on product specifications and submission formats.

Attachment / Clauses

This document, "Attachment 3: CONTRACT PROVISIONS AND CLAUSES," is an integral part of the "9mm Pistol Caliber Carbine Rifle and Accessories" solicitation (Solicitation #: 70US0926R70093557).

It primarily consists of:

• Solicitation Provisions Incorporated by Reference: A comprehensive list of FAR provisions that are incorporated into the solicitation by reference. These provisions cover a wide range of topics including:
  • Certifications and representations (e.g., regarding payments, internal confidentiality, women-owned businesses, System for Award Management, telecommunications and video surveillance equipment).
  • Prohibitions related to contracting with certain entities or engaging in specific activities (e.g., Iran, Kaspersky Lab, ByteDance, inverted domestic corporations).
  • Contractor responsibility matters.
  • Instructions for offerors and competitive acquisition.
  • Compliance with various laws and regulations (e.g., veteran employment, greenhouse gas emissions).
• FAR Provisions Incorporated by Full Text: Specific FAR clauses that are included in their entirety, such as:
  • 52.252-5: Authorized Deviations in Provisions.
  • 52.204-24: Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.
  • 52.204-26: Covered Telecommunications Equipment or Services-Representation.
• Clauses Incorporated by Reference: Another extensive list of FAR clauses incorporated by reference, covering areas such as:
  • Definitions, Gratuities, Anti-Kickback Procedures.
  • Contractor employee whistleblower rights.
  • System for Award Management, Unique Entity Identifier.
  • Reporting requirements (e.g., executive compensation, service contract reporting).
  • Prohibitions related to specific technologies or entities (e.g., Kaspersky Lab, ByteDance, inverted domestic corporations, U.S. flag commercial vessels).
  • Small business programs (e.g., HUBZone, SDVOSB, WOSB, small business subcontracting).
  • Labor standards (e.g., child labor, equal opportunity, veteran employment, minimum wages, paid sick leave).
  • Privacy and security safeguards.
  • Trade agreements, foreign purchases, disaster or emergency area set-asides.
• Clauses Incorporated by Full Text: Specific FAR clauses included in their entirety, such as:
  • 52.212-5: Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services.
  • 52.216-18: Ordering.
  • 52.216-19: Order Limitations.
• USSS Clauses: Specific clauses from the U.S. Secret Service, including:
  • Unauthorized Use of the U.S. Secret Service Name.
  • Electronic Submission of Payment Requests.
  • Contracting Officer's Technical Representative.

Relevance to Bidders: This document is critical for bidders as it outlines the legal, regulatory, and contractual requirements that will govern any resulting contract. Bidders must carefully review all incorporated provisions and clauses to understand their obligations, responsibilities, and the terms under which they will be expected to perform. Particular attention should be paid to representations and certifications required, prohibitions, and any specific clauses that may impact their business operations or proposal preparation.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) details the requirements for the acquisition of 9mm Pistol Caliber Carbines (PCC) for the United States Secret Service (USSS).

• Procurement of 9mm Pistol Caliber Carbines (PCC) in both standard and compact/personal defense weapon (PDW) variants.

• The contract will be a single-award indefinite-delivery, indefinite-quantity (IDIQ) contract with a ceiling quantity of 1,000 firearms over a five (5) year period of performance.

• Firearms must be commercially available, new manufacture, and exhibit an 'manual of operation' consistent with existing AR-15 family of weapons.

• Deliveries will be made to the USSS/RTC facility in Washington, DC, in accordance with agency procedures and subject to National Firearms Act regulations.

• Warranty: Minimum five (5) year warranty from delivery date. Lower receivers warranted for a minimum of 10,000 rounds.

• First Article Test (FAT): Government may require FAT, with contractor responsible for associated costs and logistics.

• Quality Management System (QMS): Manufacturer must have a QMS in place.

• Non-Disclosure of Serial Numbers: Serial numbers shall not be released to non-US Government entities without prior approval.

• Period of Performance: Five (5) year ordering period for the IDIQ contract.

• Place of Performance: Delivery to USSS/RTC, Washington, DC.

• Design: Operable by right or left-handed users; dark, subdued, rust/corrosion resistant finish; closed-bolt, mechanically delayed operating system.

• Barrel: Chambered for 9x19mm Luger, minimum service life of 10,000 rounds, free of defects, chromium plated or equivalent, and threaded for sound suppressor.

• Sound Suppressor: Required, capable of reducing acoustic signature by at least 15 decibels.

• Mode of Fire: Semi-automatic.

• Fire Selector: Ambidextrous, rotary type with 'safe' and 'semi-automatic' positions.

• Trigger: Two-stage, 3.00-5.00 pound pull, smooth face, not wider than trigger guard.

• Charging Handle: Located at rear of upper receiver, non-reciprocating, with ambidextrous latch.

• Bolt Hold-Open Device: Magazine-activated and manually operable.

• Magazine Well: Compatible with specified GLOCK magazines (17, 15, 24, 33-rd).

• Lower Receiver: Laser-etched with make, model/variant, and serial number.

• Upper Receiver: Mil-Std-1913 Picatinny rail; free-floating handguard with MLOK-compatible slots (full size) or MLOK slots not required (PDW).

• Pistol Grip: Securely attached, adjustable backstraps may be provided.

• Buttstock: Quickly adjustable for length-of-pull (LOP) without tools.

• Training: Armorer training required within 30 days prior to first delivery.

• Documentation: Factory recommended maintenance procedures, spare parts inventory.

• Tools: Five (5) sets of proprietary or unique service tools required.

• Dimensions & Weight: Specific requirements for 'Full Size' PCC and 'PDW' variants are detailed, including height, width, overall length, weight, barrel length, handguard length, and suppressor impact on length.

Solicitation / RFP / RFQ

This document is a solicitation for the procurement of various firearm components and related items. The U.S. Special Operations Command (USSOCOM) is seeking to acquire these items to support its operations.

• Complete Pistol Caliber Carbine (PCC) w/ suppressor (175 units)

• Complete Pistol Caliber Carbine (PCC) - PDW w/ suppressor (240 units)

• Standard PCC Upper Receiver Assembly (100 units)

• PDW - PCC Upper Receiver Assembly (100 units)

• Handguard Assembly (200 units)

• Bolt Carrier Group Assembly (200 units)

• Suppressor (201 units)

• Trigger Group Assembly (200 units)

• Lower Receiver Assembly (200 units)

• Preventative Maintenance Parts (203 units)

• Contract Type: Firm Fixed Price for all items.

• Period of Performance: Not explicitly stated, but the delivery address is USSS HQ-HEADQRTRS, Washington DC.

• The solicitation issue date is January 9, 2026.

• The offer due date is not specified in the provided document pages.

• Evaluation criteria and submission instructions are not detailed in the provided sections.

• The acquisition is marked as "UNRESTRICTED" with no specific set-aside indicated.

• The North American Industry Classification Standard (NAICS) code is 332994 (Small Arms Manufacturing).

• The Federal Supply Class (FSC) code is 1005 (Guns, through 30mm).

• The solicitation references FAR clauses and provisions, but these are not detailed in the provided sections.

Solicitation / RFP / RFQ

This solicitation is a Request for Proposal (RFP) from the United States Secret Service (USSS) for 9mm Pistol Caliber Carbine Rifles and Accessories. The USSS intends to award a single award IDIQ with a 5-year ordering period. The award will be made on a Best Value Tradeoff basis, where non-price factors are significantly more important than price.

• The core deliverable is a 9mm Pistol Caliber Carbine Rifle and associated accessories.

• Offerors must submit samples for a multi-phase evaluation process.

• Key performance characteristics to be evaluated include barrel life, accuracy, malfunctions, and price.

• Specific requirements include compliance with the National Firearms Act, provision of maintenance schedules, operator/armorer manuals, and warranty information.

• Contract Type: Single Award IDIQ with a 5-year ordering period.

• Evaluation Basis: Best Value Tradeoff.

• The evaluation is a three-phased approach:

  • Phase I: Technical Volume Review, Conformity with SOW, Trigger Test, Velocity Test, Accuracy Test, Rifle Drop Test, Safety Inspection, and Armorer's Repair & Maintenance Evaluation.
  • Phase II: End User Evaluations (Ease of Use, Comfort, Mission Compatibility) and Live Fire Assessment.
  • Phase III: Reliability & Endurance (R&E) testing (10,000 rounds per firearm), including trigger, velocity, and accuracy testing at intervals.

• Proposals are due by 4:00 PM EST on February 27, 2026.

• Questions are due by 4:00 PM EST on January 21, 2026.

• Offerors must be deemed responsible and meet all solicitation requirements.

• No specific set-aside is mentioned.

• Offerors must submit specific sample sizes for evaluation (5 PCC firearms, 5 PDW upper receivers, each with 10 magazines).

• The document details extensive testing procedures, including drop tests, reliability tests, and accuracy measurements.

• Pricing proposals will be evaluated for fairness and reasonableness but not rated.