: CAT 6 Premise Cable installation

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial services, specifically the installation of CAT 6 Premise Cable in Building 419 at the Pittsburgh 911th Airlift Wing in Coraopolis, PA. The government is procuring these services via a firm-fixed-price purchase order using simplified acquisition procedures. The solicitation is 100% set-aside for Small Business.

• Installation of CAT 6 Premise Cable IAW Attachment #2 (Juniper Project Statement of Work) for Building 419.

• Offerors must provide a technical description of offered items to demonstrate compliance with the SOW.

• A Technical Capability Narrative is required to substantiate the Offeror's ability to meet the requirements.

• Contract Type: Firm-Fixed-Price Services Purchase Order.

• Period of Performance: 120 days from date of award.

• Offerors must hold prices firm for 30 calendar days from the quote due date.

• Payment Terms: Net 30 Days AFTER acceptance of service.

• Quotes are due by Monday, February 2nd, 2026, at 9:00 a.m. eastern time.

• Submission is via email to ryan.scott.34@us.af.mil and crystal.spurlin@us.af.mil.

• Award will be made on the basis of Lowest Price Technically Acceptable (LPTA).

• Technical evaluation will be conducted first; only technically acceptable quotes will be considered for pricing evaluation.

• The government may conduct interchanges for clarification.

• 100% total set-aside for Small Business.

• NAICS Code: 238210 with a Small Business Standard of $19.0 Million.

• Offerors must be registered in the System for Award Management (SAM).

• An optional site visit is scheduled for Thursday, January 15th, 2026, at 9:00 a.m. eastern time. Registration is required by Monday, January 12th, 2026.

• Questions will be accepted during the site visit timeframe and through Monday, January 19th, 2026.

• Attachment #1: Combined Synopsis Solicitation

• Attachment #2: Bldg 419 Juniper Project Statement of Work (SOW)

• Attachment #3: Bldg 419 Proposed Juniper Locations - Initial layout drawing

• Attachment #4: Offer Pricing Template

Form / Attachment / Pricing Sheet

This document is Attachment #4 to RFQ FA671226Q0005, serving as the Offer Pricing template. Bidders are required to use this form to submit their pricing for the specified services.

• Line Item: 0001
• Description: CAT 6 Premise Cable installation IAW Attachment #2 Statement of Work for Bldg 419
• Period of Performance: 90 Days from date of award
• Estimated Quantity: 1 Job
• Fields for Unit Price and Extended Price are to be completed by the bidder.
• A section for "TOTAL PRICE" is included.
• The form requires the offer to be "EXPIRES ON:"
• Bidders must provide a "Deliver Date", "Net Terms (Mandatory)", and "UEI".
• Signature block includes "Printed Name", "Title", "Signature", and "Date".

This template is essential for bidders to accurately provide their cost proposal for the CAT 6 premise cable installation. Completing this form correctly is a mandatory step in the proposal submission process.

Form / Attachment / Pricing Sheet

This document provides a floor plan for Building 419, indicating current and proposed network equipment locations. It serves as a visual guide for the installation of new Juniper network equipment and the identification of existing CradlePoint equipment.

• First Floor Plan: Shows room layouts and numbers for the first floor of Building 419.
• Basement Plan: Shows room layouts and numbers for the basement level of Building 419.
• Legend:
  • Blue Circles: Indicate current CradlePoint Access Points (APs).
  • Blue Square: Indicates current CradlePoint Switch.
  • Red Circles: Indicate preferred Juniper AP locations.
  • Red Square: Indicates the correct Juniper Switch installation location.

This drawing is crucial for bidders to understand the physical layout of Building 419 and the proposed locations for network infrastructure upgrades. It helps in visualizing the scope of work related to network equipment placement and installation, aiding in the preparation of accurate proposals and resource planning.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) defines the requirements for the Contractor to engineer, furnish, install, and test (EFI&T) premise wiring within building B419 at Pittsburgh IAP ARS to support Wireless Access Points (WAP).

• Provide all materials, transportation, labor, management, tools, and incidentals for the project.

• All materials must be new and not refurbished.

• Identify and coordinate base support requirements (e.g., laydown and storage areas) with 911OG.

• Restore all disturbed grounds/base property to its original condition or better.

• Responsible for project waste removal and disposal in accordance with Federal, State, local, and base environmental laws and regulations. Removed premise wiring to be transported to DRMO.

• Engineer, furnish, and install premise wiring infrastructure.

• Install Cat 6 cables, blue in color, home-run from user drop to patch panel. Cable runs not to exceed 300 feet.

• Install 23 single drops for Wireless Access Points.

• Use specified Leviton termination hardware (Opti-X and Quickport).

• Label all new premise wiring installations according to the Pittsburgh IAP ARS label scheme (Attachment #2).

• Test and certify all new cable installations to Category 6 specifications.

• Restore all working areas to their original condition.

• Provide CAT 6 UTP RJ45 Patch Cords (blue).

• All work must comply with industry and applicable standards (detailed in Section 8.0).

• Test and certify all new cable installations to Category 6 specifications.

• Provide a detailed acceptance test plan and conduct on-site testing.

• Period of Performance: Not to exceed three months after the project start.

• Place of Performance: Pittsburgh IAP ARS.

• Hours of Work: Routinely during normal operating hours (0700-1500, Monday-Friday, excluding federal holidays). Off-hours work requires coordination and notification.

• Management: Provide a complete milestone schedule and a full-time, on-site Project Manager.

• Quality Assurance: Provide quality assurance support throughout the project, including weekly progress reports.

• Compliance: Adhere to all Federal, State, county, and base security and safety laws, regulations, policies, and requirements.

• Environmental Management: Comply with stringent environmental laws and regulations. Be aware of potential asbestos.

• Security: Work performed at UNCLASSIFIED level. DoD Secret Security Clearance may be required for certain personnel. Process Site Visit Request Letter for base access at least one week prior to arrival.

• Deliverables: As-Built Drawings, Work Schedule, Status Reports, Meeting Minutes, Test Report, Test Plan.

• Warranty: One-year warranty or manufacturer's standard commercial warranty, whichever is longer, plus a one-year workmanship warranty.