Building 2-3 Roof Replacement (Morris, MN)

Amendment / Modification

This amendment modifies Solicitation 12905B26Q0146, dated 01/30/2026.

• The primary change is to revise Project Specification 07 53-23, Section 3.7, from "INSTALLATION OF SELF-ADHEREING ROOF MEMBRANE" to "ADHERED ROOFING MEMBRANE INSTALLATION."

• A revised Section 3.7 (075323) is attached to this amendment.

• Project Specification 07 53-23, Section 3.7

No changes to proposal deadlines or submission requirements are indicated. Bidders should ensure their proposals reflect the updated specification title and content.

Amendment / Modification

This document is Amendment 3 to RFQ# 1232SA26Q0146 for the Building 2-3 Roof Replacement at the USDA-ARS North Central Soil Conservation Research Laboratory (Morris, MN).

It revises Section 3.7, "INSTALLATION OF SELF-ADHEREING ROOF MEMBRANE," of Project Specification 0753-23.

The revised section, titled "ADHERED ROOFING MEMBRANE INSTALLATION," provides detailed instructions for the installation process, including:

• Following manufacturer's written instructions for membrane installation.

• Unrolling and allowing the membrane to relax before installation.

• Aligning membrane with uniform side and end laps, staggering end laps.

• Applying bonding adhesive to the substrate and underside of the membrane, with specific instructions not to apply it to splice areas.

• Mechanically fastening the membrane at terminations, penetrations, and the perimeter.

• Shingling side laps with the roof deck slope where possible.

• Field fabricated seam installation procedures, including cleaning, priming, applying splice tape, rolling laps, and sealing.

• Sealing deck drains and securing the membrane with a clamping ring.

• Section 3.7 "INSTALLATION OF SELF-ADHEREING ROOF MEMBRANE" is revised.

This amendment provides revised technical specifications for the roofing membrane installation. Bidders should review these changes to ensure their proposals accurately reflect the updated requirements.

Solicitation / RFP / RFQ

This document is a Request for Quotation (RFQ) for the "Building 2-3 Roof Replacement" project located in Morris, MN. The United States Department of Agriculture (USDA), Agricultural Research Service (ARS), North Central Soil Conservation Research Laboratory (NCSCRL), requires roof replacement services for Building 2-3.

• The primary deliverable is the "Building 2-3 Roof Replacement."

• An option for "500 sq/ft Steel Decking" is also included.

• Technical data, including Statement of Work, Project Specifications, Photographs, Miscellaneous Forms, and Project Drawings, are provided as attachments.

• The anticipated contract type is Firm Fixed Price.

• The period of performance and estimated value are not explicitly stated in this document.

• Quotes must be submitted via email to Spencer Hamilton at spencer.hamilton@usda.gov by the due date and time.

• Quotes must include:

  • Email quote on company letterhead.
  • Pricing and SAM Unique Entity Identifier (UEI).
  • Acknowledgement of solicitation amendments (SF-30).
  • Active SAM.gov registration and completed electronic annual representations and certifications.

• Evaluation will be based on the Lowest Price Technically Acceptable (LPTA) criteria.

• Technical Acceptability will be rated "acceptable" or "unacceptable."

• Factors for evaluation include:

  • Specialized Experience (minimum of two, maximum of three similar projects within the last five years).
  • Key Personnel (Site Superintendent and Safety Manager with at least 5 years of specialized experience).
  • Past Performance (recent and relevant, rated acceptable or neutral).
  • Price.

• Offerors must hold prices firm for 90 calendar days from the date specified for receipt of offers.

• No specific set-aside is mentioned.

• Offerors are not required to meet a qualification requirement to be eligible for award.

• A site visit is scheduled for Wednesday, February 11, 2026, at 09:00 a.m. Central Time. RSVP is required by Tuesday, February 10, 2026.

• Questions must be submitted via email to spencer.hamilton@usda.gov by 12:00 p.m. Central Time, Wednesday, February 18, 2026.

• This document is "Revised Attachment 6 - Solicitation Terms and Conditions."

• Bonding requirements are detailed, with a bid guarantee not required for proposals less than $150K.

• Numerous FAR and AGAR clauses are incorporated by reference and are applicable to this solicitation.

Amendment / Modification

This amendment (0002) to Solicitation 1232SA26Q0146, dated 01/30/2026, has the following purposes:

• To provide an attached Questions and Answers document.

• To provide a revised Attachment 6, "Solicitation Terms and Conditions," which updates the schedule of items for an option item.

• Attachment 6 - Solicitation Terms and Conditions

• The amendment does not explicitly state a change to proposal deadlines or submission rules, but bidders should review the revised Attachment 6 and the Q&A document for any impact on their proposals.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation # 1232SA26Q0146 for Building 2-3 Roof Replacement at the USDA-ARS North Central Soil Conservation Research Laboratory in Morris, MN.

• Magnitude of Construction: USDA now uses Revolutionary FAR Overhaul (RFO); Magnitude of Construction is not included in Part 36.

• Hazardous Material Abatement: Abatement is not within the scope of work. If encountered, inform the COR.

• Proposal Due Date: March 4, 2026, 12:00 pm CST.

• Site Visit: A site visit was scheduled for February 11, 2026, 9:00 am CST. No additional site visits are planned.

• Work Hours: Internal building access work must be between 8 am and 5:30 pm weekdays. External activities also require supervision during these hours.

• Roof Deck Repair: An option (CLIN 1001) for 500 sq ft of steel decking repair has been added, with a unit price per square foot required.

• Bonds: Bonds are required, as detailed in Revised Attachment 6.

• EPDM Membrane: EPDM is the specified membrane, not TPO or PVC.

• The proposal due date remains March 4, 2026, 12:00 pm CST, unless amended.

• Responses to questions will be issued via amendment.

• An option for steel deck repair has been added to the schedule of items.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, specifically the roof replacement for Building 2-3 at the USDA Agricultural Research Service (ARS) North Central Soil Conservation Research Laboratory (NCSCRL) in Morris, MN. This announcement serves as the only solicitation, and a separate written solicitation will not be issued. The acquisition is set-aside for small business concerns.

• Roof replacement for Building 2-3.

• Detailed specifications, drawings, and statement of work are provided in attachments.

• Anticipated Award Type: Firm Fixed Price Contract.

• The government intends to make one award.

• Site Visit: Scheduled for Wednesday, February 11, 2026, at 09:00 a.m. Central Time. RSVP required by Tuesday, February 10, 2026.

• Questions Deadline: Wednesday, February 18, 2026, by 12:00 p.m. Central Time.

• Quote Submission: Must be submitted via email to spencer.hamilton@usda.gov by the due date and time.

• Quote Submission Requirements: Include company letterhead quote, pricing, SAM UEI, acknowledgement of amendments, active SAM.gov registration, completed electronic representations and certifications, detailed description of at least two (but no more than three) similar projects within the last five years, resumes for Key Personnel (Site Superintendent and Safety Manager), and Past Performance information.

• Evaluation Criteria: Lowest price technically acceptable. Evaluation factors include Technical Acceptability, Specialized Experience, Key Personnel, Past Performance, and Price.

• Offer Acceptance Period: Prices must be held firm for 90 calendar days from the offer receipt date.

• Total Small Business Set-Aside.

• Numerous FAR and AGAR clauses and provisions are incorporated by reference and listed within the document.

• A bid guarantee is not required for proposals less than $150K. For proposals above $150K, a bid guarantee of not less than 20% of the proposed price (not to exceed $3,000,000) is required.

• Payment and Performance Bonds are required for awards over $35,000 and $150,000 respectively.

Amendment / Modification

This amendment to Solicitation 1232SA26Q0146, dated 01/30/2026, has the following purposes:

• Site Visit Sign-In Sheet: Provides a copy of the Site Visit Sign-In Sheet.

• Clarification of Bonding Requirements: Provides a revised Attachment 6 - Solicitation Terms and Conditions to clarify bonding requirements.

• Attachment 6 - Solicitation Terms and Conditions has been revised.

No changes to proposal deadlines or submission requirements are indicated by this amendment, beyond the clarification of bonding requirements.

Form / Attachment / Pricing Sheet

This document is a sign-in sheet for a site visit conducted on February 11, 2026, for the "Building 2-3 Roof Replacement" project (RFQ# 12325A26Q0146) at the North Central Soil Conservation Research Laboratory (NCSCRL) in Morris, MN.

• Lists attendees by name, company, email, and phone number.
• Includes signatures for most attendees.
• Provides project details: date, time, project name, RFQ number, and location.
• Contains important instructions regarding submission of questions and answers.

This document confirms attendance at the site visit, which is often a prerequisite or highly recommended for understanding the project scope and requirements. It also provides contact information for other potential bidders and companies involved, which may be useful for networking or subcontracting opportunities. Crucially, it reiterates the deadline and method for submitting questions related to the solicitation (spencer.hamilton@usda.gov by 12:00 p.m. Central Time, Wednesday, February 18, 2026). It also clarifies that site visit discussions are not binding unless submitted in writing and incorporated via amendment.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) details the requirements for the replacement of the existing roofing system on Building 2-3 at the North Central Soil Conservation Research Laboratory (NCSCRL) in Morris, MN.

• Complete removal of the existing roofing system down to the metal deck, including all layers (rubber membrane, coverboard, insulation, substrate board, particle board) and associated flashing, coping, and trim.

• Preparation of the roof deck substrate to ensure compatibility with the new roofing system and to obtain manufacturer's warranty.

• Furnishing and installation of a new EPDM roofing system, including substrate board, vapor barrier, roof insulation, coverboard, walkways, flashing, coping, trim, and accessories.

• Replacement of all roofing coping-flashing installations, ensuring new flashing meets FM ratings and matches existing fascia where applicable.

• Modification and extension of existing vent pipe flashing assemblies and equipment curbs (HVAC units, exhaust fans) to accommodate the new roofing installation and meet code compliance.

• Protection, disconnection, removal, and re-installation of roof-mounted HVAC units if height adjustments are required.

• Application of sealant at dissimilar material intersections to ensure a weather-tight seal.

• Reuse of existing roof scuppers for secondary drainage.

• The new roofing system must be a complete, properly functioning, weather-tight installation.

• Installation must be performed in a manner to obtain the manufacturer's roof warranty.

• All work must comply with applicable building codes and standards, including Minnesota State Building Codes, NEC, and Factory Mutual (FM) ratings.

• Dust containment plan must be submitted and approved.

• Daily reports documenting construction activities, including photographs, are required.

• Project Location: Building 2-3, USDA-ARS-North Central Soil Conservation Research Laboratory (NCSCRL), 803 Iowa Avenue, Morris, MN.

• Period of Performance: To be indicated in the Contract Documents, beginning after Notice to Proceed.

• Interested parties are strongly encouraged to visit the site.

• Offerors must assume existing roof construction details as described.

• Contractor is responsible for hauling away, recycling, and legally disposing of removed components.

• Basis-of-design products are specified, but contractor-proposed equals will be considered upon review.

• Submittals (product data, shop drawings) are required as per Project Specifications.

• Final cleaning of the project area to a "broom swept" quality is required.

• Work must be scheduled to avoid disrupting ongoing research and facility operations.

• Appropriate PPE must be utilized.

• New and renovated installations shall be labeled per ANSI standards.

Form / Attachment / Pricing Sheet

This document, "Attachment 2: Project Specifications," provides detailed technical specifications for the "Building 2-3 Roof Replacement" project at the North Central Soil Conservation Research Laboratory (NCSCRL) in Morris, MN. It outlines the specific requirements and standards for the roofing work.

• List of Specifications: Includes sections on Construction Progress Documentation, Submittal Procedures, Temporary Facilities and Controls, Execution, Closeout Procedures, Operation and Maintenance, and the specific material specification for Ethylene-Propylene-Diene-Monomer (EPDM) Roofing.
• Detailed Technical Requirements: The document delves into specific requirements for:
  • Construction progress documentation and reporting.
  • Submittal procedures, including electronic submission formats and processing times.
  • Temporary facilities and controls, including utilities, sanitation, and site security.
  • Execution of work, covering cutting, patching, and protection of installed construction.
  • Closeout procedures, including record documents, waste diversion, and warranties.
  • Operation and maintenance manual requirements.
  • Specifics for EPDM roofing, including materials, installation methods, performance requirements (wind uplift, fire resistance), and warranties.

This attachment is crucial for bidders as it defines the technical scope, materials, and execution standards for the roof replacement project. It details the quality assurance measures, installation procedures, and closeout requirements that must be adhered to. Bidders must carefully review these specifications to accurately estimate costs, develop their technical proposals, and ensure compliance with all government requirements.

Form / Attachment / Pricing Sheet

This document, "Attachment 3: Photographs," provides visual documentation of the existing roof conditions for Buildings 2-3 at the North Central Soil Conservation Research Laboratory (NCSCRL) in Morris, MN. It is intended to serve as a reference for contractors developing bids or proposals for the Building 2-3 Roof Replacement project.

• Photographs of Roof Conditions: Includes numerous photos (Photo 1 through Photo 10b) detailing various aspects of the existing roof, including HVAC units, vents, drainage, and general surface wear.
• Interior Metal Deck Photos: Photos (Photo 11 through Photo 11c) show the metal deck from the interior of Building 2-3.
• Roof Core Samples: Photos (Photo 12 through Photo 12b) display core samples taken from different locations of the roof, illustrating the layers and thickness.
• General Notes: States that photographs were taken in March 2025 and advises contractors to use them as a reference but to confirm all existing conditions and measurements prior to commencing work.
• Note on Roof Cores: Mentions that 1/2" of plywood/particle board was not retrievable and exists between the last layer and the metal deck.

This attachment is crucial for bidders to visually assess the current state of the roof, identify potential issues, and understand the construction of the existing roof layers. It aids in accurate estimation and proposal development for the roof replacement project. Bidders are explicitly instructed to verify all site conditions and measurements independently.

Forms / Attachments / Pricing Sheets

This document, "Attachment 4: Miscellaneous Forms," provides several forms required for the "Building 2-3 Roof Replacement" project at the USDA-ARS-NCSCRL in Morris, MN. These forms are essential for material submittals, tracking components, and property disposition.

• Material Approval Submittal Form: To be completed by the contractor for each material submittal. It requires details on specifications, description of material, and recommendations/approvals from A&E, COR/EPM, and the Contracting Officer.
• Schedule of Material Submittals: Lists required materials and information submittals for the project, including specification sections and types of submittals (e.g., shop drawings, samples, warranties).
• Recently Replaced Component Form: To be completed for equipment replacements and building improvements over $75,000. It captures details of the old and new items, including system, equipment, installation date, location, model, and manufacturer.
• AD-107 Form: A "Report of Transfer or Other Disposition or Construction of Property" form, to be completed with Government assistance for project closeout.

Bidders must understand and be prepared to complete and submit these forms as part of their contractual obligations. The forms dictate the process for material approval, project documentation, and property management, impacting project closeout and compliance.

Form / Attachment / Pricing Sheet

This document, "Attachment 5: Project Drawings," provides architectural and structural drawings for the "Building 2-3 Roof Replacement" project at the North Central Soil Conservation Research Laboratory (NCSCRL) in Morris, MN. These drawings are intended for reference and as a resource for bidders in developing their proposals.

• Index of Drawings: A comprehensive list of all architectural, structural, and mechanical drawings, along with standard details.
• Site Plan: Details the layout of the facility, including buildings, driveways, parking areas, and grading information.
• Architectural Sections and Elevations: Provides detailed views of building exteriors and interiors, including room layouts, door types, and material specifications.
• Structural Plans: Outlines the structural framework, including foundation plans, roof framing, and rigid frame details.
• General Notes: Includes important information regarding grading, contours, site elevations, and specific construction requirements.

Bidders must carefully review these drawings to understand the existing conditions, scope of work, and specific design requirements for the roof replacement project. The "General Notes" on page 2 explicitly state that "The Contractor shall confirm existing conditions and measurements prior to proceeding with any project activities." This highlights the importance of using these drawings as a preliminary guide and conducting thorough on-site verification.

Solicitation / RFP / RFQ

This document is a Request for Quotation (RFQ) for the Building 2-3 Roof Replacement project at the United States Department of Agriculture (USDA), Agricultural Research Service (ARS), North Central Soil Conservation Research Laboratory (NCSCRL) in Morris, MN. The government intends to make one award for this requirement.

• Roof replacement for Building 2-3.

• Detailed specifications, statement of work, and project drawings are provided in separate attachments.

• Anticipated contract type: Firm Fixed Price.

• Site Visit: Scheduled for Wednesday, February 11, 2026, at 09:00 a.m. Central Time. RSVP required by Tuesday, February 10, 2026.

• Questions Deadline: Wednesday, February 18, 2026, by 12:00 p.m. Central Time, submitted via email to spencer.hamilton@usda.gov and Sharon.Weyers@usda.gov.

• Quote Submission: Must be submitted via email to spencer.hamilton@usda.gov by the due date.

• Quote Contents: Must include company letterhead, pricing, SAM UEI, acknowledgement of amendments (SF-30), active SAM.gov registration, completed electronic representations and certifications, detailed specialized experience (minimum 2, maximum 3 similar projects within the last 5 years), key personnel resumes (Superintendent and SSHO), past performance examples (minimum 3 projects within the last 5 years), and pricing for the base item.

• Evaluation Method: Lowest price technically acceptable (LPTA).

• Evaluation Factors: Technical Acceptability, Specialized Experience, Key Personnel, Past Performance, and Price.

• Offer Acceptance Period: Prices must be held firm for 90 calendar days from the specified receipt date.

• No specific set-aside is mentioned; however, various small business clauses are included.

• The document lists numerous FAR clauses and AGAR clauses applicable to this solicitation, covering areas such as terms and conditions, changes, inspection, warranty, labor standards, small business concerns, and more.

• Attachment 6, "Solicitation Terms and Conditions," is this document.

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for building construction projects in Stevens County, Minnesota. It establishes the prevailing wage rates and fringe benefits for various labor classifications that must be paid on federal or federally funded construction projects covered by the Davis-Bacon Act.

• General Decision Number: MN20260101
• Publication Date: 01/02/2026
• State: Minnesota
• County: Stevens County
• Construction Type: Building (does not include single-family homes or apartments up to and including 4 stories).
• Labor Classifications: Lists numerous job titles (e.g., ARTICULATED HAULER, ASBESTOS ABATEMENT WORKER, BOILERMAKER, BRICKLAYER, CARPENTER, ELECTRICIAN, LABORER, POWER EQUIPMENT OPERATOR, TRUCK DRIVER) with their corresponding prevailing hourly wage rates and fringe benefits.
• Executive Orders: Includes notes on Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage for Federal Contractors).
• Appeals Process: Outlines the process for appealing wage determinations.

Bidders must use these prevailing wage rates when preparing their proposals for construction projects in the specified area. Failure to comply with these wage requirements can lead to contract non-compliance. The document helps bidders accurately estimate labor costs and ensure they meet federal labor standards.

Form / Attachment / Pricing Sheet

This document, Form ARS-371, is a Construction Progress and Payment Schedule. It is used to outline the breakdown of work, payment milestones, and progress tracking for construction projects.

• Contract Information: Fields for Contract Number, Project, Location, Contractor's Name & Address, Amount, Calendar Days, Starting Date, and Completion Date.
• Progress Schedule: Columns for Description of Branch of Work, Value (in dollars), Percent of Work (overall project percentage), and Start/Complete dates for each branch.
• Schedule of Payments: Columns to track completed work, payments made, and total payments.
• Change Orders/Amendments: A section for tracking items related to Change Orders, Amendments, and other modifications.
• Signatures: Spaces for Contractor's Signature and Contracting Officer's Approval.

Bidders are required to complete and submit this form within 14 calendar days after receiving the Notice to Proceed. It details how the project will be broken down into manageable work items, their value, and the expected timeline for completion. This schedule is crucial for tracking project progress and is a prerequisite for payment requests, even if partial payments are not being sought. The form also serves as a baseline for tracking changes to the project scope or schedule.

Form / Attachment / Pricing Sheet

This document, "CONTRACTOR'S REQUEST FOR PAYMENT TRANSMITTAL" (Form ARS-372), is used by contractors to request payment for work completed under a contract. It serves as a transmittal for progress payment certifications.

• Contract Information: Fields for Contract Number, Project, Location, Partial Payment Number, Final Payment status, and Requisition Number.
• Payment Calculation: Sections to detail:
  • Amount of original contract
  • Change orders and/or amendments
  • Total adjusted contract prices
  • Value of work completed to end of period
  • Value of material stored at the site
  • Total value of work completed and stored material
  • Retainage percentage and amount
  • Total due contractor through the end of this period
  • Less previous requests
  • Net amount due contractor for this payment
• Material Stored: A section to describe material stored at the site, including its description and value.
• Contractor's Progress Payment Certification: A certification statement by the contractor's authorized representative, affirming that requested amounts are for performance in accordance with contract terms, payments to subcontractors have been made, and the request does not include amounts withheld from subcontractors. It also states that this certification is not final acceptance of subcontractor performance.
• Approval Signatures: Fields for the signature of the contractor's authorized representative, and recommendations for payment by appropriate government personnel (EPM, COR, CM, or A-E) and concurrence by EPM or COR.

This form outlines the specific financial and certification requirements for contractors seeking payment. Bidders should understand this process as it dictates how they will be reimbursed for work performed. It highlights the need for accurate tracking of contract value, completed work, stored materials, and compliance with certification requirements, including timely payments to subcontractors.