Demolition Services B15 and B54

Amendment / Modification

This amendment implements Class Deviation 2026-00040 by adding the clause FAR 52.222-90, "Addressing DEI Discrimination by Federal Contractors." This clause is incorporated by reference.

• Section I - Contract Clauses

• FAR Clause 52.222-90, "Addressing DEI Discrimination by Federal Contractors" (Deviation 2026-00038)

• The effective date of this amendment is April 28, 2026.

• All terms and conditions of the original solicitation remain unchanged, except as modified by this amendment.

Questions & Answers / Clarifications

This document provides official Government responses to questions submitted by prospective offerors prior to the deadline for the Demolition Services B15 and B54 solicitation (FA309926Q0008).

• Scope of Work (SOW) for B15 Demolition: Clarifies that the demolition of the northern metal pavilion includes its concrete foundation, metal framing, roof, and any electrical items. However, it explicitly excludes concrete sidewalks and steps outside a marked area, as depicted in RFI Attachment Figure 1. It also clarifies that railroad ties, decorative rock, and landscaping items within the railroad ties are included in the removal.
• Water Lines: Exterior water supply faucets and lines are to be capped 5 feet from the slab, as stated in the SOW, not completely removed.
• Electrical Work: Rio Grand Electric Cooperative (RGEC) is responsible for the primary side. The contractor must coordinate the demolition of the secondary service line to the facility through RGEC as a subcontractor.
• Fire Alarm and Data Equipment: The contractor is tasked with removing and disposing of Fire Alarm and Data Equipment and coordinating disconnection with relevant authorities prior to demolition.
• Foundations: As-built drawings for foundations are not available. The Government has assumed depths for reinforced concrete foundations for B15 and B54 (12" wide x 24" depth outer end/center beams, 6" slab).
• Hazardous Material Testing: Testing must include lead paint, asbestos, and soil testing (PFAS and PFOA). Disposal tickets must be provided to the Government.
• Seeding and Watering: Seeding is required, and the contractor shall water the site for 14 days after installation.
• Security Fencing: Security fencing is required for the project. Refer to RFI Attachment Page 4 and Figure 5 for scope.

These clarifications refine the scope of work for demolition, specify responsibilities for electrical and equipment removal, provide assumptions for foundation depths, and detail requirements for hazardous material testing and security fencing. Bidders should review these responses carefully to ensure their proposals accurately reflect the project requirements.

Amendment / Modification

This amendment (0001) to Solicitation FA309926Q0008, dated April 16, 2026, adds the following attachments:

• Solicitation Questions and Answers (Q&A)

• RFI Attachment

• Section J - List of Attachments

This amendment does not extend the hour and date specified for receipt of offers. Offerors must acknowledge receipt of this amendment.

Form / Attachment / Pricing Sheet

This document provides visual specifications and details for various site improvements, likely for a construction or maintenance opportunity. It includes images and brief descriptions of work required at specific locations.

• B15 North Sidewalk/Steps: Image showing a sidewalk/steps area with a "Quality" mat and yellow/black striped markings, outlined in red.
• B15 South Sidewalk/Steps: Two images showing similar sidewalk/steps areas with yellow/black striped markings, outlined in red.
• B54 Sidewalk/Steps: Image of a building (labeled "54") with a sidewalk/steps area outlined in red.
• Fencing Specs: Details for approximately 30 ft of steel fencing, including:
  • Powder coat finish
  • Trident spearcaps (4-sided)
  • Adjustable crossbar
  • Not welded
  • 5" on center spacing
  • Dimensions (e.g., 96", 71", 72", 2.5", 2", 1") are indicated on an image of the fence.

This document serves as a visual guide and specification for potential bidders to understand the scope of work related to sidewalk/step repairs or installations and fencing requirements. Bidders should use this information to assess the materials, labor, and complexity involved in these tasks.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) outlines the requirements for the demolition of structures and foundations at Laughlin Air Force Base that are no longer occupied or in operation. The buildings are aircraft maintenance shops and storage buildings not needed for the current mission.

• Demolition of two buildings: Building 15 (approx. 815 sq ft) and Building 54 (approx. 358 sq ft).

• Buildings are described as having acoustic ceiling tiles, VCT tile or carpeted flooring, wood walls, and wood/metal roofs.

• Work includes providing all materials, labor, tools, equipment, and transportation.

• Hazardous materials testing is required. If hazardous materials are found, the Contracting Officer (CO) must be contacted for next steps.

• Removal of sidewalk steps leading into buildings.

• Removal of north sidewalk up to Pavilion concrete and entrance steps for B15.

• Removal of steps at entrance up to the end of the path for B54.

• Utility marking (including abandoned utilities) and capping of utility lines.

• Coordination with Rio Grand Electric Cooperative for electric work.

• Site restoration, including backfilling, grading, seeding, or stabilizing soil.

• Protection of adjacent buildings, sidewalks, and property from damage.

• Installation of new fencing for B54 upon completion of demolition.

• The project is located within a controlled area at Laughlin Air Force Base, Texas.

• Period of Performance (PoP) for NTP #1 (submittals) is 91 days.

• Period of Performance (PoP) for NTP #2 (demolition) is 35 days.

• Total PoP is 126 calendar days, subject to adjustment by the CO.

• Contractor shall submit a Final Statement of Work (SOW) with their proposal.

• Contractor shall investigate existing conditions and obtain necessary information through on-site investigation.

• Hazardous material testing of walls, floors, and roof is required.

• Submission of an AF Form 103, Work Clearance Request, 30 business days prior to digging.

• Creation of a demolition plan, FOD plan, Dust/Debris Control plan, and Stormwater Pollution Prevention plan.

• Demolition and disposal must comply with Attachment C, Laughlin AFB Environmental Quality Construction Specifications. Disposal on Laughlin Air Force Base is prohibited.

• Barricades are required to protect surrounding environment and buildings.

• Coordination with CORs and facility managers for utility disconnections is required, with at least 15 business days' notice.

• Airfield Driving Training is required.

• Specific Airfield Entry Control Points (ECP 1 for B15, ECP 2 for B54) must be used.

• Submittals include a construction schedule, final SOW, and schedule of submittals.

• Meetings include on-site investigation, pre-construction, and weekly partnering meetings.

Other / Unclassified

This document is a placeholder page. It indicates that the PDF viewer may not be able to display the document's proper contents. It suggests upgrading to the latest version of Adobe Reader or visiting a provided link for assistance.

This document does not contain substantive information related to the SAM.gov opportunity. It is an informational page related to PDF display issues and does not provide details about requirements, deliverables, or submission instructions for bidders.

Form / Attachment / Pricing Sheet

This document, the "Laughlin Legacy – Sustainable Landscape Development Plan (SLDP)," outlines a comprehensive strategy for developing and maintaining sustainable landscapes at Laughlin Air Force Base (AFB), Texas. It serves as a guide for improving the installation's aesthetics while reducing maintenance requirements and promoting environmental sustainability.

• Landscape Development Policy Statement: Mandates that all projects incorporate SLDP considerations and budgets, require professional landscape architect review, allocate specific funding for landscape development, and utilize approved plant and inert material lists and irrigation standards.
• Landscape Development Concept Statement: Emphasizes water and energy conservation through regionally-appropriate landscape design, divided into three hydrozones (Inner, Intermediate, Outer) based on water needs.
• Approved Plant List: Details trees, shrubs, perennials, grasses, and groundcovers suitable for Laughlin AFB, categorized by characteristics such as hardiness, native status, maintenance needs, and availability.
• Approved Inert Material List: Specifies acceptable gravel, decomposed granite, and river run stone for landscape use, considering compatibility, availability, installation, and appropriate application.
• Irrigation Standards: Provides guidance on efficient irrigation, including needs assessment, installation, and establishment, with a focus on minimizing turf areas and optimizing water use through methods like drip irrigation and smart controllers.
• Landscape Development Zoning Plan: Divides the installation into Primary, Secondary, and Tertiary zones, dictating the level of landscape treatment and budget allocation for each.
• Streetscape Corridor Plan: Directs landscape development along roadways to enhance utility, beauty, and safety.
• Anti-terrorism/Force Protection (ATFP) Landscape Guidelines: Integrates security requirements into landscape design, including standoff distances and plant selection criteria.
• Landscape Construction Guidelines: Outlines requirements for designers and contractors to ensure successful implementation of landscape designs.
• Landscape Maintenance Guidelines: Emphasizes timely and proper maintenance as crucial for long-term landscape success, detailing necessary tasks and the importance of funding.
• Laughlin Legacy Implementation Plan: Suggests actions for near-future execution, including finalizing and implementing the SLDP, amending maintenance contracts, reviewing zoning plans, and ensuring proper installation and inspection.

This document provides critical information for any contractor involved in landscape design, construction, or maintenance at Laughlin AFB. It defines the specific standards, materials, plant palettes, irrigation methods, and design principles that must be adhered to. Understanding these requirements is essential for developing accurate proposals and successfully executing landscape projects on the installation.

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor, Wage and Hour Division, "Register of Wage Determinations Under the Service Contract Act." It provides the minimum wage rates and fringe benefits required for various occupations in specific geographic areas. This document is relevant for contractors bidding on or performing federal service contracts to ensure compliance with labor laws.

• Wage Determination Number: 2015-5303, Revision No. 30
• Date of Last Revision: 12/03/2025
• State: Texas
• Area: Texas Counties of Edwards, Kinney, Real, Uvalde, Val Verde
• Occupational Listing: Includes a comprehensive list of job titles, corresponding occupation codes, and their required minimum hourly wage rates.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listing. Specific benefits like Health & Welfare and Paid Sick Leave (EO 13706) are detailed, along with vacation and holiday policies.
• Executive Orders: Notes the applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) to covered contracts.
• Conformance Process: Outlines the procedure for classifying and determining wage rates for occupations not explicitly listed in the determination.

Bidders must consult this document to determine the minimum wage and benefit rates they must pay employees working on a federal service contract in the specified Texas counties. Failure to comply can result in penalties. This document is crucial for accurate cost estimation in proposals.

Solicitation / RFP / RFQ

This solicitation is for Demolition Services for Buildings B15 (Aircraft Maintenance) and B54 (Aircraft Shop) located at Laughlin AFB. The project requires the contractor to provide all materials, labor, tools, equipment, transportation, and other incidentals to complete the demolition work.

• Demolition of Aircraft Maintenance Building B15.

• Demolition of Aircraft Shop Building B54.

• Provision of all necessary materials, labor, tools, equipment, and transportation.

• Site restoration, including backfilling, grading, seeding, and installation of a new security fence.

• Airfield security measures, including temporary fencing and FOD prevention.

• Proper handling and disposal of demolition debris, with encouragement for recycling.

• Ensuring a safe work environment.

• Disconnection and de-energization of primary electrical service for the buildings.

• Contract Type: Firm-Fixed Price.

• Period of Performance: Within 126 calendar days from the Notice to Proceed.

• Estimated Value: Not explicitly stated, but the NAICS code 238910 has a size standard of $19M.

• Proposals are due by 03:00 PM local time on April 30, 2026.

• Quotes must be submitted electronically via email.

• Evaluation will be based on Price (most important), Technical, and Past Performance.

• A site visit is scheduled for April 22, 2026, at 09:00 a.m. CDT.

• Questions must be submitted via email by April 24, 2026, 03:00 p.m. CDT.

• This solicitation is 100% set-aside for Small Business. Only Small Businesses will be considered.

• Funds are not presently available for this solicitation.

• Offerors must acknowledge receipt of any amendments.

• The contractor must obtain base identification and vehicle passes for access to Laughlin AFB.

Form / Attachment / Pricing Sheet

This document is a site map or layout of an area, likely an installation or facility. It displays various buildings, roads, and marked locations with alphanumeric identifiers (e.g., B15, B54, Alpha, Juliet) and numerical designations. It appears to be a reference document for understanding the physical layout of the site.

• Road names (e.g., Alabama Ave, Arizona Ave, Kansas Ave, Liberty Dr, Arkansas Ave, California Ave, Kentucky Ave, Colorado Ave)
• Building outlines and numerical identifiers (e.g., 50, 65, 77, 100, 2100, 2101, 2102)
• Marked locations with alphanumeric labels (e.g., B15, B54, Alpha, Juliet, CC, BB, AA, EE, DD, CO)
• Various numerical labels, potentially representing addresses, parcel numbers, or other site-specific data.
• Symbols indicating potential areas of interest or development (e.g., green outlined area, blue outlined area).

This map is crucial for bidders to understand the physical context of the opportunity. It helps in visualizing the location of work, potential access points, and the general environment of the site. Bidders should use this document to orient themselves with the physical aspects of the project, especially if the opportunity involves work at specific locations marked on the map.

Other / Unclassified

This document, "LAUGHLIN AIR FORCE BASE DIVISION 01 GENERAL SPECIFICATION GUIDELINES FOR CONSTRUCTION PROJECTS," provides detailed guidelines and requirements for construction projects at Laughlin Air Force Base (LAFB). It covers a wide range of topics essential for contractors, including general work scope, regulations, health and safety, quality control, submittals, site management, and closeout procedures.

This document is crucial for any bidder considering construction opportunities at LAFB. It outlines:

• Scope of Work: Defines the contractor's responsibilities for providing labor, materials, equipment, and oversight for construction projects, adhering to LAFB's specific standards.
• Regulatory Compliance: Details requirements for permits, licenses, and adherence to federal, state, and local statutes, as well as specific base regulations.
• Safety and Health: Emphasizes strict compliance with OSHA and other safety standards, including the submission of a Contractor's Safety Plan and adherence to base-specific environmental requirements.
• Quality Control: Outlines the necessity of a robust Quality Control (QC) system, including the roles and qualifications of a QC Manager and the process for submittals and inspections.
• Site Operations: Covers temporary construction facilities, traffic control, working area conditions, sanitation, and the use of temporary utilities.
• Controlled Areas and Airfield Operations: Provides specific rules for working in controlled areas and on the airfield, including scheduling, foreign object debris (FOD) control, and driving regulations.
• Submittals and Reporting: Details the process for submitting various documents, including shop drawings, product data, test reports, and closeout documents, as well as requirements for progress reports and meetings.

Bidders must thoroughly review this document to understand the comprehensive operational, safety, and administrative requirements for performing construction work at LAFB.

Other / Unclassified

This document, "Environmental Quality Construction Specifications" for Laughlin Air Force Base (LAFB), outlines the environmental compliance requirements for all construction, demolition, rehabilitation, alteration, modification, repair, and maintenance activities on LAFB properties. It details regulations, procedures, and restrictions related to environmental compliance, hazardous materials and waste management, earth disturbance, water quality, and air emissions.

This document is critical for any contractor performing work on Laughlin AFB. It specifies:

• Environmental Compliance: Adherence to all federal, state, and local environmental laws and regulations.
• Installation Restrictions: Specific rules regarding POL/Fuels, disposal of waste, and handling of toxics, including concrete washout procedures.
• Requirements Prior to Construction: Mandates for Environmental Management System (EMS) training, hazardous materials approvals, and site-specific plans (e.g., SWPPP, HWMP).
• During Construction: Procedures for immediate notification of toxic encounters, artifacts/remains, spills, and species of interest. It also covers disposal of non-hazardous and hazardous waste, contractor vehicle usage, and good housekeeping practices.
• Before Close-Out: Requirements for documenting hazardous material usage, waste disposal records, and ground restoration.
• Appendices: Include acronyms, EMS awareness training materials, a Hazmat Usage Log, a flowchart for determining permit coverage, and a pre-construction checklist.

Contractors must familiarize themselves with these specifications to ensure compliance and avoid penalties. Key areas include proper waste disposal, spill prevention and reporting, hazardous material handling, and site restoration. The document also references various appendices and external regulations (e.g., TCEQ, EPA) that bidders must adhere to.

Form / Attachment / Pricing Sheet

This document is a Schedule of Submittals template, providing a comprehensive list of required submissions from the contractor at various project stages for Project # 23-1101 + 23-1102, "Demolish Aircraft Maintenance Shop B15 + B54". It outlines specific items, relevant contract references, types of submittals, required copies, and submission deadlines.

• NTP 1 - Pre-Construction Submittals: Includes items such as Entry Access List, OPSEC Training proof, Antiterrorism Training, Demolition Plan, Statement of Work, Progress Schedule, Meeting Minutes, Work Clearance Request, Contractor Safety Plan, QC Manager Qualifications, QC Plan, Construction Site Plan, and various Hazardous Material/Waste related plans and approvals.
• NTP 2 - Construction Submittals: Includes Non-Hazardous and Hazardous Waste Disposal Manifests, Hazmat Usage Log, QC Daily Inspection Reports, Records of Existing Conditions, Materials Testing, Completion Inspection, Draft and Final DD Form 1354, and Construction Warranty Management Plan.
• Deadlines: Specifies submission dates relative to Notice to Proceed (NTP) 1 and NTP 2, or as required weekly, monthly, or prior to specific project milestones.

This schedule is critical for bidders to understand the full scope of administrative and technical documentation required throughout the project lifecycle. It highlights key deliverables and their associated timelines, which are essential for project planning, resource allocation, and ensuring compliance with contract requirements. Bidders should review this schedule carefully to assess their capacity to meet these submittal obligations.