F-16 Electronic Component

Amendment / Modification

• This amendment extends the due date for offers.

• The due date for receipt of offers has been extended.

• The original due date of 27 February 2026 has been extended to 23 March 2026.

Amendment / Modification

• This amendment extends the due date for offers.

• The due date for receipt of offers has been changed.

• The original due date was January 2, 2026. The new due date is February 27, 2026.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for government contracts.

• Adherence to AFMC Form 158, Packing Requirements, and various Department of Defense (DoD) Military Standards, ASTM International, and ANSI standards.
• Development of military packaging using MIL-STD-2073-1, including handling of hazardous and classified materials.
• Application of commercial packaging standards (ASTM D3951) when prescribed.
• Use of MIL-STD-129 for military marking, labeling, and shipment planning.
• Compliance with International Standards for Phytosanitary Measures (ISPM 15) for wood packaging material used in international trade.
• Adherence to procedures for electrostatic material packaging (MIL-STD-2073-1, MIL-HDBK-773, ANSI/ESD S20.20, ESD TR20.20, MIL-STD-129).
• Use of Item Type Storage Code (ITSC) as required.
• Application of MIL-STD-147 for palletized unit loads and MIL-STD-648 for specialized shipping containers.
• Preparation, labeling, certification, and compliance for hazardous materials shipments according to various international and US regulations (ICAO, CFR Title 49, IATA, IMDG, AFMAN24-604).
• Preparation and submission of Safety Data Sheets (SDS) per FED-STD-313.
• Use of the Special Packaging Instructions Retrieval & Exchange System (SPIRES) for packaging requirements.
• Safeguarding and replacement of reusable containers.
• Reporting of supply discrepancies via Web Supply Discrepancy Report (WebSDR).
• Accessing specifications, standards, and data item descriptions via the ASSIST website.

Not explicitly detailed, but compliance with specified standards and regulations implies performance requirements.

Not specified in this document.

• Compliance with specific military standards, commercial standards, and international regulations.
• Proper documentation, labeling, and certification for all packaging and shipments, especially for hazardous materials.
• Reporting of discrepancies and use of designated systems (SPIRES, WebSDR, ASSIST).
• Contact information for AFSC (406 SCMS/GULAA) is provided for inquiries.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) that specifies various components, assemblies, and procedures related to the F-16 Electronic Component. It serves as a reference for the technical data and requirements associated with these items.

• Lists specific engineering drawing numbers, accomplishment document numbers, and revision levels.
• Includes component nouns, furnished/distribution codes, and remarks.
• Details specific requirements such as unit assembly, interface units, power supplies, microcircuits, adhesives, and testing procedures.
• References specific Qualified Manufacturers List (QML) or Qualified Products List (QPL) information where applicable.

This EDL provides a detailed breakdown of the technical documentation and specifications required for components related to the F-16 program. Bidders can use this to understand the specific technical requirements, approved parts, and associated procedures that may be relevant to their proposal or contract fulfillment. It highlights the level of detail and specific standards that must be met.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies the requirements for a Counterfeit Prevention Plan (CPP). It outlines the data item number, title, and submission details for the CPP.

• Data Item Number: A001
• Title: Counterfeit Prevention Plan (CPP)
• Authority: DI-MISC-81832
• Contract/PR No.: FD2020-26-00089
• Requiring Office: 416 SCMS/GUEAA
• Submission Deadline: NLT thirty (30) calendar days after contract award.
• Resubmission: If remediation is required, comments will be provided within fourteen (14) calendar days. Resubmission is due NLT seven (7) calendar days after receipt of comments.
• Format: Contractor Format Acceptable.
• Distribution: Distribution Statement "D" (Department of Defense and U.S. DoD contractors only). Export Control Warning applies.

This CDRL mandates the submission of a Counterfeit Prevention Plan. Bidders must understand the requirements for developing and submitting this plan, including the deadlines and resubmission procedures, as it is a deliverable under the contract.

Form / Attachment / Pricing Sheet

This document, "ENGINEERING DATA REQUIREMENTS (ATTACHMENT 'A')", provides specific instructions and requirements for the manufacture of the "UNIT ASSY-ADVANCED MISSILE REMOTE INTERFACE, SMS" (Part Number: 16E10150-801, NSN: 5998-01-322-7746WF) for the F-16 aircraft. It details specifications, standards, materials, and critical processes that must be adhered to.

• Specifications and Standards: Lists applicable specifications and standards to be used in lieu of indicated data, with a note that superseded data will not be furnished unless specified. Substitutions require prior approval.
• Materials: Specifies the use of certain materials, such as SAE AMS-QQ-A-250/4, and notes that military specifications/standards will not be furnished in the bid set.
• Soldering Requirements: Mandates the use of appropriate portions of MIL-STD-2000 for aircraft soldering, with J-STD-001 as a potential alternative if it meets or exceeds MIL-STD-2000.
• Lead-Free Solder: Addresses the Air Force's stance on lead-free solder, requiring continued use of leaded solders for electrical and electronic military products until a reliable lead-free replacement is identified, to maintain performance and reliability.
• Counterfeit Prevention: Outlines comprehensive requirements for a Counterfeit Prevention Plan (CPP), including policies and procedures to avoid, detect, mitigate, and disposition counterfeit electronic parts. This involves risk assessment, testing, configuration identification, traceability, and reporting.
• Unique Identification (UID): Requires UID application per MIL-STD-130.

This document is crucial for bidders intending to manufacture the specified missile interface assembly. It dictates the technical, material, and process requirements, including stringent counterfeit prevention measures. Bidders must ensure their proposals and manufacturing processes comply with all outlined engineering data requirements, specifications, and standards. Failure to comply could impact performance, reliability, and national security. The document also highlights the importance of lead-free solder policies and the need for a robust Counterfeit Prevention Plan.

Solicitation / RFP / RFQ

This solicitation is for the manufacturing of Bare Printed Circuit Boards. The acquisition is restricted to qualified sources: Elbit America (CAGE: OWEC9) and Lockheed Martin (CAGE: 81755).

• Bare Printed Circuit Board Manufacturing.

• Items are subject to MIL-STD-130 for marking.

• Packaging and marking requirements are detailed, including MIL-STD-129 and ASTM-D-3951.

• Supply chain traceability documentation is required.

• Counterfeit prevention measures are mandated.

• Contract Type: Firm Fixed Price.

• Period of Performance: Not explicitly stated, but delivery for Item 0001 is by 30 NOV 2027.

• Estimated Value: Not stated.

• Quantity Range Pricing is requested for 8 Circuit Card Assemblies, with ranges from 1-2 EA up to 16-20 EA.

• Offers are due by 2 January 2026, 11:59 PM.

• Offers will be held firm for 120 calendar days.

• Evaluation criteria are not detailed in this section, but Past Performance is listed as the most important factor, followed by Cost or Price.

• This acquisition is restricted to qualified sources: Elbit America and Lockheed Martin.

• Foreign Military Sales (FMS) customers are involved, which may lead to volatile quantities.

• On-Time Delivery (OTD) Improvement Initiative requirements are in place.

• Less than a truckload shipment is acceptable and authorized.

• Early and partial deliveries are acceptable at no increase in cost.