FY26 Multiple Location BEQ Spalling Repairs

Amendment / Modification

This amendment (0002) to solicitation N40085-26-R-9041, "FY26 Multiple Location BEQ Spalling Repairs," primarily serves to provide the site visit sign-in sheet.

• The document itself is an amendment.

• The site visit sign-in sheet is attached.

• The time and date for receipt of proposals remain unchanged.

• Bidders are reminded that failure to acknowledge this amendment may result in the rejection of their proposal.

Amendment / Modification

• This amendment (0001) modifies solicitation N40085-26-R-9041 for FY26 Multiple Location BEQ Spalling Repairs.

• The time and date for receipt of proposals remain unchanged.

• A site visit has been scheduled for Monday, May 18, 2026, at 1000. Contractors should meet at Building M430.

• The description of the amendment/modification is updated to include the site visit information.

• Proposal deadlines are unchanged.

• Contractors are advised to acknowledge this amendment when submitting their proposal, as failure to do so may lead to rejection.

Statement of Work (SOW)

To perform comprehensive concrete spalling repairs and apply a new protective coating system to exterior walkways, stems, and balconies for Bachelor Enlisted Quarters (BEQ) facilities.

• Surface Preparation & Demolition: Remove unsound, loose, or cracked concrete from cantilevered walkways and decks.

• Concrete Repair: Treat exposed reinforcing steel with anti-corrosion coating and repair spalls to a sound and uniform surface at specified locations (under walkways, stems, railing mounts, balcony/walkway edges).

• Protective Coating System: Apply a complete protective coating to the entire surface area of walkways, stems, and balconies. Incorporate a non-slip additive on all walking surfaces.

• Concrete Repair Product: Epoxy-Based with minimum criteria for Compressive Strength (13,000 PSI), Flexural Strength (5,500 PSI), and Shrinkage Properties (Non-Shrinking).

• Protective Coating System: Epoxy, Acrylic, or Urethane based, formulated for exterior use, elastomeric, UV stable, water resistant, vapor permeable. Finish to be grey with anti-skid texture. Minimum applied thickness of 13 Dry MILS.

• The SOW covers multiple buildings (HP195, M430, M435, BB260, BB265, BB270) with approximate quantities listed for each task.

• Buildings will remain occupied during construction; work must minimize disruption.

• Submittals: Contractor must submit manufacturer product data and specifications for approval prior to procurement.

• Permits: Contractor is responsible for securing all required permits and utility clearances.

• Incidental Damage: Any damage caused by the contractor must be repaired at no additional cost.

• Debris Management: Contractor is responsible for legal removal, transport, and disposal of debris; Government dumpsters are prohibited.

• Site Access & Coordination: Coordinate site access and schedules with designated personnel for each building (contact information provided).

Solicitation / RFP / RFQ

This solicitation is for FY26 Multiple Location BEQ Spalling Repairs at MCB Camp Lejeune, North Carolina. The project involves building construction, excluding single-family homes or apartments up to and including 4 stories.

• Repair of spalling in multiple Building Equipment Group (BEQ) locations.

• Work is to be performed in an operational facility, requiring minimal interference with normal operations.

• Specifications and drawings are available as attachments on SAM.gov.

• Contract Type: Not explicitly stated, but implied to be a construction contract.

• Period of Performance: 720 days after award.

• Estimated Cost Range: Between $5,000,000 and $10,000,000.

• Liquidated Damages: $880 per Calendar Day.

• Proposal Due Date: June 8, 2026, at 2:00 PM EST.

• Basis for Award: Lowest Price.

• Proposal Acceptance Period: 60 days from receipt of offers.

• RFIs cut-off: May 25, 2026, by 2:00 PM EST.

• Proposals must be submitted on all line items to avoid rejection.

• Evaluation of options will be based on adding the price for ELINs 0001 through 0006.

• This solicitation is restricted to a specific list of contractors provided in the document.

• Offerors are advised that funding may not become available, and no award will be made if funds are not available. No reimbursement for effort or proposal costs will be provided.

• Bond Requirements: Vary based on proposal value (none for <$40K, payment bond for $40K-$150K, bid, payment, and performance bonds for >$150K).

• Wage Determination: General Decision Number NC20260010 1/2/2026 (Building) applies.

• Executive Orders regarding Paid Sick Leave (EO 13706) and minimum wage (EO 13658) are applicable.

• Buy American Requirement-Construction Materials Under Trade Agreements applies.

Form / Attachment / Pricing Sheet

This document provides detailed instructions and diagrams for performing typical spalling concrete repairs. It serves as a guide for contractors on how to address damaged concrete surfaces.

• Repair Procedure: Outlines steps for chipping away loose concrete, exposing sound substrate, and preparing exposed rebar.
• Rebar Preparation: Requires power wire brushing of exposed rebar to remove all rust.
• Patching Material: Specifies the use of a lightweight concrete patching compound.
• Finishing: Mandates applying a finish that matches the existing adjacent areas in plane and texture.
• Diagrams: Includes two detailed illustrations of "Typical Spalling Concrete Repair" and a "Typical Spalling Repair Detail" to visually guide the repair process.

This document is crucial for bidders to understand the specific methods and materials required for concrete repair work associated with the opportunity. It directly impacts the scope of work, labor, and materials needed for accurate proposal preparation and execution of the contract.

Other / Unclassified

This document is the "Contractor Environmental Guide" for Marine Corps Base Camp Lejeune and Marine Corps Air Station New River, dated September 2023. It provides comprehensive guidance to contractors on environmental regulations, policies, and procedures applicable to work performed at these installations.

This guide is crucial for any contractor planning to work on MCB Camp Lejeune or MCAS New River. It outlines:

• Environmental Management System (EMS): Explains the installation's EMS, its principles, and contractor responsibilities.
• Specific Environmental Areas: Details requirements and procedures for various environmental topics including Air Quality, Environmental Emergency Planning and Response, Cultural Resources, Hazardous Materials/Waste Management, Asbestos, Lead-Based Paint, Natural Resources, Stormwater, Solid Waste/Recycling/Pollution Prevention, Potential Discovery of Contaminated Sites, Permitting, and Timber management.
• Training Requirements: Mandates general environmental awareness and EMS training for all contractors and their employees.
• Points of Contact: Provides essential contact information for various environmental offices and emergency response.
• Regulatory Compliance: Emphasizes the contractor's responsibility to comply with all applicable Federal, State, and local environmental laws and regulations.

Contractors must review this guide to understand their environmental obligations and ensure compliance to avoid penalties and project delays.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the "Summary of Work" for a project located at Marine Corps Base Camp Lejeune, North Carolina. The objective is to include all items of work as described in the attached project description.

• The work encompasses all items detailed in the attached project description.

• Work will be performed at Marine Corps Base Camp Lejeune, North Carolina, within specified buildings and areas.

• Construction will be phased according to the attached project description.

• Includes protection, repair, or replacement of existing work as necessary, ensuring it is returned to a condition equal to or better than its original state.

• Contractor is responsible for identifying and verifying the location and elevation of existing underground facilities.

• Existing work must be protected from damage during construction operations.

• Repaired or replaced portions of existing work must match existing or adjoining work, as approved by the Contracting Officer.

• Underground facilities must be verified for elevations before installing new work.

• Location: Marine Corps Base Camp Lejeune, North Carolina.

• Contractor must obtain services of a professional utility locator to scan the construction site.

• Contractor must notify the Contracting Officer's Representative (COR) 48 hours prior to starting excavation work.

• Government-furnished material and equipment will be indicated on drawings and in the scope of work, if applicable.

Form / Attachment / Pricing Sheet

This document is a Submittal Register, which serves as a checklist and tracking tool for all required submittals throughout the construction project. It outlines the specific documents, reports, plans, and certifications that the contractor must provide to the government for review and approval at various stages of the project.

• Item Submitted: Lists the specific document or deliverable (e.g., Schedule of Prices, Accident Prevention Plan, Quality Control Plan, Test Reports).
• Description: Provides a brief explanation of the item.
• Specification Section: References the relevant section in the project specifications.
• Submittal Register Columns: Includes fields for tracking transmittal dates, action codes (e.g., for contractor review, government approval), dates submitted, received, and returned, as well as remarks.

This document is crucial for bidders to understand the full scope of administrative and technical documentation required for project execution and closeout. It helps in planning for the resources and time needed to prepare and submit these items, which is a key part of contract compliance and successful project delivery.