MODULAR OPERATIONAL RATION ENHANCEMENT (MORE)

Amendment / Modification

• The submission deadline has been extended from January 16th, 2026, at 3:00 PM EST to January 30th, 2026, at 3:00 PM EST.

• Clause 52.216-19, Order Limitations, paragraph (a) has been revised to state that the Government is not obligated to purchase or the Contractor obligated to furnish supplies or services covered by the contract if the amount is less than 10,000 cases each.

• Section C-4.D on page 14 of 110 is to be disregarded.

• The heading for "Certificate of Analysis (COA) Requirements" on page 20 of 110 has been renumbered from 12 to 13.

• A new requirement has been added after item (8) on page 20 of 110, stating that peanuts and tree nuts, and their products, not explicitly required by the component specification, shall not be used as an ingredient in components without permission from the contracting officer.

• Section D. PCR-F-001, First Strike Bars, Shelf Stable, on page 21 of 110, has been disregarded, specifically the microbiological requirements for aerobic plate count and yeast and mold.

• Under section L-3 Technical Proposals on page 104, Offerors are required to submit a Product Demonstration Model (PDM) as a completed case for each NSN or line item. This PDM must include all three menu's contents and certify that each menu meets minimum nutritional requirements. A list of ingredients for each entree, complementary item, and accessory packet, as well as the source of any shelf-life extension materials, must be included. Specific shipping instructions for PDMs to DLA Troop Support and the Combat Capabilities Development Command Soldier Center are provided.

• Solicitation submission deadline

• Clause 52.216-19

• Section C-4.D

• Section C-4.H.12 (renumbered to 13)

• Section C-4 (new requirement regarding peanuts and tree nuts)

• Section D. PCR-F-001

• Section L-3 Technical Proposals (new PDM submission requirement)

• The proposal submission deadline has been extended to January 30th, 2026.

• New requirements for submitting Product Demonstration Models (PDMs) have been added, including specific content and shipping instructions.

Amendment / Modification

This amendment (0001) incorporates a list of clauses into the solicitation SPE3S126R0008. These clauses are added by reference and have the same force and effect as if they were included in full text.

• The amendment adds numerous FAR and DFARS clauses, including but not limited to:

  • Clauses related to conformance, responsibility, shipping, definitions, gratuities, contingent fees, and anti-kickback procedures.
  • Clauses concerning contractor ethics, whistleblower protections, and prohibitions on certain agreements.
  • Clauses related to personal identity verification, SAM maintenance, service contract reporting, and commercial entity codes.
  • Clauses on safeguarding covered contractor information systems, use of mandatory sources, and protecting government interests when subcontracting.
  • Clauses on market research, instructions to offerors, and notification of ownership changes.
  • Clauses related to ordering, indefinite quantity, and small business concerns (including HUBZone, utilization, and subcontracting plans).
  • Clauses on equal opportunity for veterans and workers with disabilities, and employment reports.
  • Clauses concerning drug-free workplace, Buy American, and preference for certain domestic commodities.
  • Clauses on federal, state, and local taxes, and interest.
  • Clauses related to assignment of claims, and levies on contract payments.
  • Clauses on bankruptcy, and requests for equitable adjustments.
  • Clauses related to warranty of supplies, counterfeit electronic part detection, and preference for U.S. flag air carriers.
  • Clauses on termination for convenience and default.
  • Clauses related to NIST SP 800-171 DOD Assessment Requirements.

• The amendment does not explicitly state an extension of the offer receipt deadline. Offerors are reminded to acknowledge receipt of this amendment prior to the specified hour and date to avoid rejection of their offer. All other terms and conditions of the original solicitation remain unchanged.

Solicitation / RFP / RFQ

This solicitation is for Modular Operational Ration Enhancement (MORE) components, specifically "COLD MORE" and "HOT MORE" rations. The government is procuring these items to provide enhanced operational rations.

• Modular Operational Ration Enhancement (MORE) - Cold Weather/High Altitude (COLD MORE)

• Modular Operational Ration Enhancement (MORE) - Hot Weather (HOT MORE)

• Product Demonstration Models (PDMs) are required for initial submission and may be required for new or replacement items during contract performance.

• Compliance with numerous specifications, including those related to packaging, labeling, quality assurance, sanitation, food defense, and nutritional requirements.

• Type of contract: Indefinite-Quantity Contract (IQC).

• Period of Performance: Five (5) consecutive tiered delivery periods, each 365 days in length.

• Estimated Requirements: COLD MORE - 4,000 EA/year; HOT MORE - 20,000 EA/year.

• IQC Minimum Quantities: COLD MORE - 4,000 EA; HOT MORE - 20,000 EA.

• IQC Maximum Quantities: COLD MORE - 50,000 EA (over 5 tiers); HOT MORE - 250,000 EA (over 5 tiers).

• Delivery: F.O.B. Destination, within 60 days of delivery order issuance.

• NAICS Code: 311422 for both items.

• Size Standard: 1,400 employees.

• Proposals must be submitted via email to Julian Coppertino (Julian.Coppertino@dla.mil) and Tiendung Nguyen (tiendung.nguyen@dla.mil).

• Facsimile offers are not acceptable.

• Email size limitations apply; individual attachments should not exceed 5MB, and no single email should exceed 10MB.

• Offerors are responsible for confirming receipt of emails.

• Proposals must be received by the specified date and time.

• Evaluation will be based on Lowest Price Technically Acceptable (LPTA) source selection procedures.

• Technical proposals will be evaluated against technical requirements, including PDMs.

• Business/Price proposals will be evaluated for reasonableness and realism.

• PDMs are critical for evaluation and must meet product specifications and sensory characteristics.

• Offerors may reference previously accepted PDMs if they meet specific criteria.

• This solicitation is unrestricted to business size.

• Offerors must be registered in the System for Award Management (SAM.gov).

• The solicitation includes numerous FAR and DFARS clauses related to inspection, acceptance, quality assurance, packaging, marking, and contractor responsibilities.

• Specific attention is required for Product Demonstration Models (PDMs), including submission requirements and evaluation criteria.

• Offerors must comply with the Contractor Code of Business Ethics and Conduct.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet containing detailed item descriptions and pricing tiers for food components, categorized into "COLD" and "HOT" items. It appears to be a component of a larger solicitation or contract, likely for food supplies.

• COLD Sheet: Lists various food items such as "Applesauce, Carbohydrate Enhanced, Sweetened, Regular Style," "Baked Snack Crackers, Cheddar Cheese," and "Meat and Poultry Snacks, Cured Beef, Fermented, Chopped and Formed, Sticks, Teriyaki." Includes National Stock Numbers (NSN) and columns for quantity per case and cost per unit/case across five tiers.
• HOT Sheet: Lists different food items including "Almonds, Unblanched, Smoke Flavored," "Applesauce with Raspberry Puree, Sweetened, Regular Style," and "Energy Gel, Chocolate." Also includes NSN and pricing tier columns.
• Pricing Tiers: The spreadsheet has columns for "Tier 1" through "Tier 5," suggesting different pricing levels or contract phases.

This spreadsheet provides specific details on the types of food items required, their packaging (quantity per case), and a framework for pricing. Bidders will need to use this information to understand the product catalog, potentially populate their own pricing, and ensure they can meet the specified item descriptions and quantities. It is crucial for developing a competitive proposal or quote.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document details the requirements for the Food Packet, Modular Operational Ration Enhancement (MORE), which provides a special purpose enhancement packet for the Warfighter. Its purpose is to offer performance-enhancing and high-carbohydrate foods to help maintain optimal performance levels in extreme operational environments and during high-intensity missions.

• Types of MORE Packets:

  • Type I: High Altitude/Cold Weather
  • Type II: Hot Weather

• Components: Detailed lists of components for each type of packet are provided, including beverage powders, energy gels, snack items, first strike bars, and more. Specific flavors and reference numbers are included.

• Assembly Requirements: Specifies how components are assembled into packets and how these packets are packed into larger units.

• Packaging: Requirements for assembly packaging (shrink-wrapped or heat-sealed) and fiberboard box specifications (dimensions, burst strength, liner material) are detailed.

• Labeling: Specific requirements for labeling each MORE food packet, including type, pack number, contents list, and assembler information.

• Inspection and Acceptance: Quality assurance criteria are outlined, including definitions of critical, major, and minor defects for both assembled food packets and shipping containers. Sampling procedures and acceptable quality levels (AQL) are specified.

Not explicitly stated in this document excerpt.

• Time-Temperature Indicator (TTI) Label: Specific requirements for TTI labels, including size, activation energy, UV protection, and shelf life.
• Marking: Detailed instructions for marking shipping containers and unit loads.
• Unit Load Examination: Requirements for examining unit loads.
• Reference Documents: Lists applicable DLA Troop Support Forms and Non-Governmental Standards (e.g., ASTM, ASQ) that govern various aspects of the product and its packaging.