Premise Wiring B246 & B414

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) outlines the requirements for the Contractor to engineer, furnish, install, and test (EFI&T) an upgrade of premise wiring infrastructure to Cat-6 for Buildings 246 (B246) and 414 (B414) at Columbus AFB, MS. The project also includes the removal of existing outdated premise wiring.

• Premise Wiring Upgrade: Installation of new Cat-6 cabling, including approximately 24 cable/jacks for B246 and 12 cable/jacks for B414.

• Removal of Old Wiring: Removal and disposal of existing outdated premise wiring and associated termination materials.

• Infrastructure: Re-use of existing wall-mounted COM cabinets, installation of new Cat-6 patch panels, and appropriate cable management.

• Cabling Standards: Compliance with current ANSI/TIA telecommunication installation and testing commercial standards, Columbus AFB installation standards, and specific requirements for grounding, bonding, and structured cabling.

• Labeling: All components (cabinets, equipment, cables, faceplates, patch panels) must be labeled according to Columbus AFB standards and referenced appendices.

• Warranty: A one-year warranty or manufacturer's standard commercial warranty, whichever is longer, including a one-year workmanship warranty.

• Sustainment: Purchased equipment must be maintainable and supportable for at least five (5) years.

• Quality Assurance: Contractor must provide a Quality Control Plan and submit weekly status reports detailing progress, deficiencies, and corrective actions.

• Testing: The Contractor shall provide a test plan, conduct pre-testing, in-progress testing, post-testing, and a cutover plan. An installation test report is required.

• Period of Performance: 90 days after contract award.

• Place of Performance: Columbus AFB, MS.

• Hours of Operation: Normal duty hours, with potential for work outside normal hours coordinated with the 14th CS/SCX POC.

• Personnel: A US citizen Project Manager (PM) and an on-site Site Point of Contact (POC) are required. All key personnel must be able to read, write, speak, and understand English.

• Security: No security clearances are required; work is at the UNCLASSIFIED level. Base access requires processing a Site Visit Request Letter.

• Environmental: Compliance with stringent environmental federal, state, local laws, and Air Force policies.

• Deliverables: Include As-Built drawings, Work Schedule, Status Reports, Meeting Minutes, Cutover and Test Plan, Test Report, Equipment Catalog Data, Shop Drawings, Face Equipment Drawings, Installation Instructions/Test Procedures, Operations and Maintenance Manuals, and Project Record Documents.

Other / Unclassified

This document is a placeholder or error message indicating that the PDF content could not be displayed by the viewer. It suggests upgrading to the latest version of Adobe Reader or visiting a provided link for assistance.

This document does not contain substantive information about the SAM.gov opportunity. It is an administrative message related to PDF rendering and does not provide details on requirements, deliverables, deadlines, or other bidder-relevant information.

Form / Attachment / Pricing Sheet

This document, "Attachment 2: Provisions and Clauses," lists and incorporates by reference numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses and provisions. It serves as a critical component for potential bidders to understand the legal and regulatory framework governing the contract.

• Incorporated Clauses: The document details a comprehensive list of FAR and DFARS clauses, including their clause numbers, titles, and revision dates. These cover a wide range of topics such as:
  • Requirements relating to compensation of former DoD officials
  • Whistleblower rights and protections
  • Safeguarding covered defense information and cyber incident reporting
  • Prohibitions on contracting with entities related to the Xinjiang Uyghur Autonomous Region or Maduro Regime
  • Electronic submission of payment requests and receiving reports (WAWF)
  • Service Contract Labor Standards
  • Equal Opportunity and employment reporting requirements
  • Small business set-aside provisions
  • Buy American Act and Trade Agreements
  • Health and safety on government installations
  • Contractor access to Air Force installations
• Full Text Clauses: Some clauses, like "Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation," are provided in full text for immediate review.
• Deviations and Special Instructions: Many clauses indicate deviations (e.g., "Deviation 2026-00038") or specific instructions for their application.

This attachment is essential for bidders to understand their rights, responsibilities, and obligations if awarded the contract. It directly impacts proposal preparation, compliance requirements, and overall contract performance. Bidders must carefully review these clauses to ensure their offers meet all regulatory and legal stipulations. Key areas of focus include submission requirements (e.g., WAWF for payments), labor standards, small business participation, and any prohibitions or restrictions mentioned.

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor Wage Determination (Wage Determination No.: 2015-5157, Revision No.: 28) issued under the Service Contract Act. It establishes the minimum wage rates and fringe benefits required for various occupations performing work on federal contracts within specific geographic areas.

• Geographic Area: Mississippi Counties of Alcorn, Calhoun, Chickasaw, Choctaw, Clay, Itawamba, Lafayette, Lee, Lowndes, Monroe, Oktibbeha, Pontotoc, Prentiss, Tishomingo, Union, Webster.
• Occupational Listings: Provides a comprehensive list of occupations with corresponding minimum hourly wage rates and footnotes indicating required fringe benefits.
• Fringe Benefits: Details general health and welfare benefits ($5.55 per hour or $222.00 per week) and specific provisions for paid sick leave under Executive Order 13706 ($5.09 per hour or $203.60 per week).
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (minimum wage for federal contractors).
• Conformance Process: Outlines the procedure for contractors to request authorization for additional classifications and wage rates not listed in the determination.

This wage determination is critical for bidders to accurately estimate labor costs for their proposals. It dictates the minimum wages and benefits that must be paid to employees working on the contract, ensuring compliance with federal labor laws. Bidders must review the listed occupations to identify those relevant to the anticipated contract work and ensure their proposed labor rates meet or exceed these minimums.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) outlines the requirements for upgrading the premise wiring infrastructure to Cat-6 for Buildings 246 (B246) and 414 (B414) at Columbus AFB, MS. It also includes the removal of existing outdated premise wiring.

• Engineer, furnish, install, and test (EFI&T) new Cat-6 premise wiring.

• Remove and dispose of existing outdated cabling and associated termination material.

• Install approximately 24 cable/jacks (12 Duplex) in B246 and 12 cable/jacks (3 Duplex, 1 Quad, 2 wall drops) in B414.

• Install new Cat-6 patch panels and outlet/jacks (PANDUIT MINI COM, orange jacks).

• Install new horizontal/vertical cable management, including blanking panels and shelving.

• Install cable support hardware such as cable trays, J-hooks, and cable dropouts.

• Ensure all new and existing equipment, cable trays, and racks are bonded and grounded.

• Utilize Plenum-rated Cat-6 compliant cables and hardware; all new materials must be new and not refurbished.

• Fire-stop all cable penetrations.

• Provide new Cat-6 patch cords for connections between patch panels and network switches, and from drop locations to user devices.

• Compliance with current ANSI/TIA telecommunication installation and testing commercial standards and Columbus AFB installation standards.

• Maintain a one-year warranty or manufacturer's standard commercial warranty, whichever is longer, including a one-year workmanship warranty.

• Equipment must be maintainable and supportable for at least five (5) years (Government Re-use Equipment excluded).

• Adherence to standards referenced in Appendix A, including Federal, Military, and Commercial standards, and specific requirements for secure areas (AFSSI 7702, NSTISSAM Tempest/2-95).

• Period of Performance: 90 days after contract award.

• Place of Performance: Columbus AFB, MS.

• Hours of Operation: Routine normal duty hours; work outside normal hours requires coordination.

• Holidays/Down Days: Contractor shall not perform work on federal holidays or site-unique down-days unless authorized.

• Management: Provide a US citizen Project Manager (PM) and designate on-site Site Point of Contact (POC).

• Safety: Comply with all Federal, State, and Base security and safety laws, regulations, policies, and requirements. Suspend work if unsafe conditions are identified until corrected.

• Security: No security clearances required; work performed at UNCLASSIFIED level. Government provides escorts.

• Base Access: Process a Site Visit Request Letter for personnel requiring base access.

• Documentation: Provide As-Built Drawings (CDRL A001), Work Schedule (CDRL A002), Status Reports (CDRL A003), Meeting Minutes (CDRL A004), Cutover and Test Plan (CDRL A005), and Test Report (CDRL A006).

• Deliverables: Include Equipment Catalog Data, Shop Drawings, Face Equipment Drawings, Installation Instructions/Test Procedures, Operations and Maintenance Manuals, and Project Record Documents.

• Labeling: All components to be labeled per Appendix B standards.

• Restoration: Restore all disturbed grounds/base property to original condition or better.

• Project Residue: Dispose of all residues off-base IAW environmental laws and regulations.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) outlines the requirements for the Contractor to engineer, furnish, install, and test (EFI&T) an upgrade of premise wiring infrastructure to Cat-6 for Buildings 246 (B246) and 414 (B414) at Columbus AFB, MS. The project also includes the removal of existing outdated premise wiring.

• Removal and disposal of existing cabling and termination materials.

• Installation of new Cat-6 cabling, patch panels, and outlet/jacks.

• Re-use of existing wall-mounted COM cabinets for new premise wiring.

• Installation of appropriate horizontal/vertical cable management.

• Installation of cable support hardware (trays, J-hooks, etc.) for cable runs.

• Grounding and bonding of new and existing infrastructure.

• Compliance with specific structured cabling requirements, including plenum-rated Cat-6 compliant cables.

• Labeling of all cabinets, equipment, cables, faceplates, and patch panels according to specified standards.

• Installation of new Cat-6 patch cords for in-use drops and user connections.

• Compliance with current ANSI/TIA telecommunication installation and testing commercial standards and Columbus AFB installation standards.

• All equipment, supplies, and materials must be new and not refurbished.

• Purchased equipment must be maintainable and supportable for at least five (5) years.

• Performance parameters to be tested before cutover.

• Quality Control Plan required, including weekly status reports and spot checks.

• Period of Performance: 90 days after contract award.

• Place of Performance: Columbus AFB, MS.

• Hours of Operation: Normal duty hours, with potential for work outside normal hours coordinated in advance.

• Safety: Compliance with all Federal, State, and Base security and safety laws, regulations, policies, and requirements. Immediate suspension of work if unsafe conditions are identified.

• Management: Provision of a US citizen Project Manager (PM) and on-site Site Point of Contact (POC).

• Security: No security clearances required; work performed at UNCLASSIFIED level. Government provides escorts if needed.

• Base Access: Processing of Site Visit Request Letter for personnel access.

• Warranty: One-year warranty or manufacturer's standard commercial warranty, whichever is longer, including a one-year workmanship warranty.

• Deliverables: Includes As-Built drawings, Work Schedule, Status Reports, Meeting Minutes, Cutover and Test Plan, and Test Report, among others.

• Appendices: Refer to Appendix A for Applicable Documents and Standards, Appendix B for Labeling Standards, and Appendix C for Drawings.

Request for Information (RFI)

This RFI is issued by the 14th Contracting Squadron (14 CONS) for market research purposes to obtain information regarding industry interest and capabilities for a new requirement related to premise wiring at Columbus Air Base (CAFB), Mississippi. This is NOT a solicitation, and the government will not award a contract based on this RFI. Costs incurred in responding are at the vendor's expense.

• The contractor shall provide all necessary equipment, tools, materials, supplies, transportation, labor, supervision, management, and other incidentals for premise wiring.

• Compliance with current ANSI/TIA telecommunication installation and testing commercial standards, and Columbus AFB installation standards is required.

• All equipment, supplies, and materials must be new and not refurbished.

• The scope includes the removal and disposal of any cabling and associated termination material, coordinated with a designated Point of Contact (POC).

• Installation of equipment cabinets/racks, cables (communications, power, grounding), equipment, pathways, wire management, and patch panels must comply with specified standards, including AFSSI 7702 and NSTISSAM Tempest/2-95 for secure areas.

• Contractors must comply with all Federal, State, and Base safety and security laws and regulations.

• Work will be suspended if deemed unsafe.

• No security clearances are required for contractor personnel; work is at the UNCLASSIFIED level. The government will provide escorts.

1. Company name, address, and points of contact.
2. Company size (small or large business).
3. Company interest and capability to fulfill the requirement.

• Responses must be submitted via email by 17 April 2026, 2:00 p.m. CST.
• Email addresses for submission are provided in the document.

Vendors are requested to indicate their business size (small business, HUB-Zone, veteran-owned, 8(a), etc.) to assist the government in determining the appropriate acquisition method, including potential set-asides.