Amended With Quote Due Date Extended: Procurement of Dynamic Waterjet Cutting Head Upgrade, Components, Software, Installation, and Training

Amendment / Modification

• The due date for quote submissions has been extended by five (5) business days.

• The new due date is May 7, 2026, moved from April 30, 2026.

• The "Response Due Date" has been updated.

• Addendum to FAR 52.212-1, "Instructions to Offerors - Commercial Products and Commercial Services" has had miscellaneous text modified, specifically within the "Instructions for Submission of Quotes" section.

• The proposal deadline has been extended to May 7, 2026, at 1600 Central European Time (CET).

• Offerors are reminded that late submissions will not be accepted.

• All other terms and conditions of the original solicitation remain unchanged.

Solicitation

This solicitation is for a "WATER-JET Cutter Upgrade" with a Product Type Code of 3441. The North American Industry Classification System (NAICS) code is 811310. The government intends to award a Firm Fixed-Price (FFP) contract based on technically approved, past performance, and lowest price.

• The primary deliverable is a "WATER-JET Cutter Upgrade."

• Vendors must provide a capability statement including an active CAGE code, POC names and phone numbers, and a statement of capability to deliver items within 90 business days.

• Demonstrated experience of at least one contract reference within the last 10 years for supplying similar items is required.

• Manufacturer technical datasheets must be provided for each item offered, demonstrating compliance with salient characteristics.

• Pricing Arrangement: Firm Fixed Price.

• Delivery Terms: FOB Destination OCONUS (Outside Continental US).

• Delivery Date: On or before 01 June 2026.

• Delivery Location: Kaiserslautern Army Depot, TLSC-E&A / Maintenance Activity Kaiserslautern, Ludwigshafener Strasse 31, Bldg 2233, 67657 Kaiserslautern, Germany.

• Offer Due Date: 07 May 2026 at 1600 Central European Time (CET).

• Quotes must be submitted via email to SSG Amponsah Kumi Evans and SSG McDaniel Melissa.

• All quotes, questions, and correspondence must be in English.

• Questions must be submitted in writing via email no later than 7 calendar days after the solicitation issuance.

• Evaluation will be based on Technically Approved, Past Performance, and Lowest Price.

• Key evaluation factors include Technical Ability (Technical Specifications and Salient Characteristics, Capabilities Statement, Demonstrated Experience, Subcontractor and Teaming Arrangements), SPRS Risk Assessment, and Price Evaluation.

• The acquisition is unrestricted.

• Offerors must be registered in SAM.gov.

• Quotes must be submitted in PDF format.

• A W-14 template is attached for all foreign registered SAM vendors.

• The period for acceptance of quotes is 90 calendar days from the specified date.

Other / Unclassified

This document is an image of industrial equipment, specifically a waterjet cutting machine manufactured by "Flow". The machine appears to be in an operational environment, possibly a factory or workshop, indicated by the surrounding industrial infrastructure, overhead crane, and safety markings.

This image does not contain textual information typically found in solicitations, SOWs, amendments, or Q&A documents. Therefore, it does not provide specific details about government requirements, deliverables, deadlines, or evaluation criteria relevant to a bidder. Its relevance to a SAM.gov opportunity record is unclear without further context linking it to a specific procurement.

Other / Unclassified

This document is an image of a Flow Mach 200 waterjet cutting machine. It displays the machine's model name, manufacturer "Flow SHAPE TECHNOLOGIES GROUP", and various operational labels such as "Luft" (Air) and "Wasser" (Water).

This image does not contain solicitation details, SOW/PWS information, amendments, or Q&A. It is a visual representation of equipment and is not directly relevant for bidders to understand the requirements or submission process of a SAM.gov opportunity.

Form / Attachment / Pricing Sheet

This document appears to be an image of a "Flow Mach 200" waterjet cutting machine. It is likely an attachment or visual reference related to a SAM.gov opportunity, possibly for procurement, maintenance, or demonstration purposes.

• The image displays a "Flow Mach 200" waterjet cutting machine.
• Branding indicates "Flow SHAPE TECHNOLOGIES GROUP®".
• Labels such as "V1", "H2", "H3", "Luft" (Air), and "Wasser" (Water) are visible.
• Safety warnings and hazard symbols are present.
• The machine is situated in an industrial environment.

This image serves as a visual aid to identify the specific equipment or technology relevant to the opportunity. Bidders may need to assess their capability to provide, maintain, or operate this type of machinery based on the opportunity's requirements.

Questions & Answers / Clarifications

This document provides responses to contractor inquiries regarding the "Procurement of Dynamic Waterjet Cutting Head Upgrade, Components, Software, Installation, and Training" (Solicitation W564KV-26-Q-A037).

• Inquiry #1: A contractor requested the system and pump type, and system and pump serial number for the upgrade.
  • Response: The system and pump type is M200 – Hyplex Prime. The system and pump serial number is NEMA 12 CAGE – SER 323021402.
• Inquiry #2: A contractor sought clarification on the spray/splash containment system, noting the existence of both simple and complex designs, and requested photos or a technical description of the current system.
  • Response: Photos of the existing spray/splash containment system were provided to illustrate the design and help define the scope for the bid.

This document clarifies specific technical details and provides visual aids that may influence how bidders prepare their quotes and understand the scope of work, particularly concerning the spray/splash containment system.

Solicitation / RFP / RFQ

This document is a solicitation (Solicitation Number: W564KV26QA0370001) for a "WATER-JET Cutter Upgrade." The government intends to award a Firm Fixed-Price (FFP) contract based on technical approval, past performance, and lowest price.

• The primary deliverable is a "WATER-JET Cutter Upgrade" (Product Type Code: 3441).

• Vendors must provide a capability statement including an active CAGE code, POC information, and a statement of capability to deliver within 90 business days.

• Demonstrated experience of at least one contract reference from the last ten years for supplying similar items is required.

• Technical documentation, including manufacturer technical datasheets, must demonstrate compliance with salient characteristics identified in Attachment 1.

• Item Unique Identification and Valuation (DFARS 252.211-7003) is required.

• Pricing Arrangement: Firm Fixed Price.

• Delivery Terms: FOB Destination OCONUS (Outside Continental US).

• Delivery Date: On or Before 01 June 2026.

• Delivery Location: Kaiserslautern Army Depot, TLSC-E&A / Maintenance Activity Kaiserslautern, Ludwigshafener Strasse 31, Bldg 2233, 67657 Kaiserslautern, Germany.

• Offer Due Date: 07 May 2026, 1600 Central European Time (CET).

• Quotes must be submitted via email to SSG Amponsah Kumi Evans (evans.amponsah-kumi.mil@army.mil) and SSG McDaniel Melissa (melissa.a.mcdaniel20.mil@army.mil).

• Email attachments are restricted to 10 MB; multiple emails must be numbered sequentially.

• All submissions must be in English and PDF format.

• Questions must be submitted in writing via email no later than 7 calendar days after solicitation issuance.

• Evaluation will be based on Technically Approved, Past Performance, and Lowest Price.

• Quotes must be complete and compliant with solicitation instructions; non-compliance may result in elimination.

• The acquisition is listed as "UNRESTRICTED."

• NAICS Code: 811310 (Commercial and Industrial Machinery and Equipment Repair and Maintenance).

• Offerors must be registered in the System for Award Management (SAM.gov).

• The solicitation incorporates numerous FAR and DFARS clauses by reference, covering topics such as "Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities," "Antiterrorism/Force Protection," and "Wide Area WorkFlow Payment Instructions."

• Specific clauses related to small business set-asides, HUBZone concerns, and price evaluation preferences are listed.

• Attachment 1 (Salient Characteristics) and Attachment 2 (W-14 Form) are referenced.

Amendment / Modification

• The response due date for quotes has been extended by five (5) business days.

• The original due date was April 30, 2026.

• The new due date is May 7, 2026.

• The "Response Due Date" information has been updated.

• Addendum to 52.212-1, Instructions to Offerors - Commercial Products and Commercial Services, has had miscellaneous text modified.

• The deadline for submitting quotes has been extended to May 7, 2026, at 1600 Central European Time (CET).

• All other terms and conditions of the original solicitation remain unchanged.

Solicitation / RFP / RFQ

This solicitation, W564KV26QA037, is for a "Professional Appearance" requirement, specifically a "WATER-JET Cutter Upgrade." The government intends to award a Firm Fixed-Price (FFP) contract based on Technically Approved, Past Performance, and Lowest Price.

• The primary deliverable is a "WATER-JET Cutter Upgrade" (Product Type Code: 3441).

• Vendors must provide a capability statement including:

  • Active CAGE Code in SAM.gov.
  • Vendor POC Names and Phone Numbers.
  • Statement of capability to deliver medical supplies within ninety (90) business days.

• Demonstrated Experience: At least one contract reference from the last ten years for supplying medical supplies or similar items.

• Subcontractor/Teaming Arrangements: An affirmative statement of performance or a list of proposed subcontractors.

• Manufacturer technical datasheets for each item offered, demonstrating compliance with salient characteristics.

• Contract Type: Firm Fixed-Price (FFP).

• Delivery Date: On or before 01 June 2026.

• Delivery Location: Kaiserslautern Army Depot, TLSC-E&A / Maintenance Activity Kaiserslautern, Ludwigshafener Strasse 31, Bldg 2233, 67657 Kaiserslautern, Germany.

• FOB: Destination OCONUS.

• Offer Due Date: 30 April 2026, 1600 Central European Time (CET).

• Submission Method: Email to SSG Amponsah Kumi Evans (evans.amponsah-kumi.mil@army.mil) and SSG McDaniel Melissa (melissa.a.mcdaniel20.mil@army.mil).

• Quotes must be in English and PDF format. WINZIP files are not accepted.

• Questions due no later than 7 calendar days after solicitation issuance.

• Evaluation Criteria: Technical Ability (Specifications, Salient Characteristics, Capabilities Statement, Demonstrated Experience, Subcontractor/Teaming Arrangements), SPRS Risk Assessment, and Price Evaluation.

• Price will not be scored or rated but will be evaluated for reasonableness.

• The acquisition is unrestricted.

• NAICS Code: 811310.

• Vendors must be registered in SAM.gov.

• Quotes must hold prices firm for 90 calendar days.

• Specific FAR and DFARS clauses are incorporated by reference and full text, including those related to item unique identification, antiterrorism, and WAWF payment instructions.

Form / Attachment / Pricing Sheet

This document is a pricing schedule for the opportunity, detailing specific CLINs (Contract Line Item Numbers) with their associated descriptions, quantities, units of issue, unit prices, and total prices.

• A001: Dynamic Waterjet Cutting Head Assembly: Requires a fully articulating, dynamic waterjet cutting head assembly capable of active taper control and beveled edge cutting, rated for a minimum of 60,000 PSI. Includes mechanical components for upgrade and installation, compatible with M200-series waterjet systems.
• A002: Control and Programming Software Suite: An integrated CAD/CAM software suite for 2D/3D cutting paths, supporting the dynamic cutting head's functionality. Requires a perpetual, non-expiring license for one user station and means for download/installation.
• A003: Installation and Training: Encompasses complete on-site installation and commissioning of hardware and software, rendering the system operational. Includes comprehensive on-site training for operators and maintenance personnel, with software training lasting at least 4 days.

This pricing sheet provides the specific items, quantities, and technical specifications required for the opportunity. Bidders must use this information to formulate their pricing proposals and ensure their offerings meet the detailed requirements for each CLIN. The unit prices and total prices are currently listed as 0.0, indicating that this may be a template for bidders to fill in or that pricing details will be provided separately.

Form / Attachment / Pricing Sheet

This document is IRS Form W-14, "Certificate of Foreign Contracting Party Receiving Federal Procurement Payments." It is used by foreign entities to certify their eligibility for exemptions from certain U.S. federal procurement taxes, specifically under section 5000C, based on international agreements or the origin of goods/services.

• Part I: Identification - Collects information about the foreign contracting party and the acquiring U.S. agency.
• Part II: Exemption Based on International Agreement - Allows certification for relief from tax under section 5000C pursuant to an international agreement (e.g., a tax treaty).
• Part III: Exemption Based on International Procurement Agreement or Goods/Services Produced/Performed in the U.S. - Allows certification for exemptions related to international procurement agreements or if goods/services are produced/performed in the U.S.
• Part IV: Explanation - Requires detailed explanations for claimed exemptions, including the specific agreement, basis for entitlement, and allocation of contract price between exempt and nonexempt amounts.
• Part V: Certificate - A sworn statement by the foreign person or their representative.

Foreign entities bidding on U.S. federal contracts may need to complete and submit this form to claim tax exemptions. Bidders should review the form and its instructions to understand the requirements for providing necessary information regarding their status, the contract, and any applicable international agreements or exemptions. This form is provided to the acquiring agency, not the IRS.

Solicitation / RFP / RFQ

This document outlines the requirements for a complete upgrade kit to modernize an existing waterjet cutting machine. The upgrade includes a dynamic cutting head for taper control and bevel cutting.

• CLIN 0001: Dynamic Waterjet Cutting Head Assembly

  • Fully articulating, dynamic waterjet cutting head (wrist assembly).
  • Capable of active taper control for straight, taper-free edges.
  • Enables cutting of beveled edges.
  • Minimum operating pressure rating of 60,000 PSI (60 KSI).
  • Includes complete wrist assembly, spray and splash containment system (e.g., Flow Shields), high-pressure tubing, fasteners, and mounting hardware.
  • Designed for compatibility with M200-series waterjet systems or equivalent machine frames.

• CLIN 0002: Control and Programming Software Suite

  • Integrated CAD/CAM software suite for creating, importing, and simulating 2D and 3D cutting paths.
  • Fully supports dynamic cutting head functionality, including automatic tool path calculation for taper compensation and bevel cutting.
  • Perpetual, non-expiring license for at least one user station.
  • Delivery includes means for download and installation.

• Common Requirements

  • All components must be brand new and CE compliant.
  • EC Declaration of Conformity required.
  • Minimum 12-month warranty from final acceptance.
  • 2 complete sets of operation and maintenance manuals in English and German.

• Supplier is responsible for complete installation and commissioning.

• Comprehensive on-site training for operators and maintenance personnel.

• Software training (minimum 4 days) covering basic to advanced dynamic cutting pathing.

Kaiserslautern Army Depot, TLSC-E&A / Maintenance Activity Kaiserslautern, Ludwigshafener Strasse 31, Bldg 223, 67657 Kaiserslautern, Germany.

Markus Feth (markus.feth.ln@army.mil, CIV: (0611) 143 547-0011).

This appears to be a solicitation for a specific hardware and software upgrade. Bidders should pay close attention to the technical requirements for both the cutting head and the software, as well as the installation, training, and documentation obligations.