Propulsor Duct Machining

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by the contractor. It outlines the requirements for a "Packaging Plan" related to the "Propulsor Duct Machining" system.

• Data Item Title: Packaging Plan
• Subtitle: Packaging, Preservation, and Shipping Plan
• Authority: DI-PACK-80455 NOT 2*
• Requirements: Must be in accordance with MIL-STD-2073-1E.
• Submission: A minimum of one draft is required. Government review and comment will occur within five (5) business days. Distribution is authorized to the Department of Defense and U.S. DoD contractors for Administrative or Operational Use. Electronic mail is preferred for distribution, with reports in electronic format (Microsoft Office or PDF).

This CDRL details a specific deliverable required for the "Propulsor Duct Machining" opportunity. Bidders need to understand the requirements for the Packaging Plan, including the applicable military standard (MIL-STD-2073-1E) and the submission and distribution procedures. This information is crucial for accurately estimating proposal costs and ensuring compliance with contract data requirements.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by the contractor under a contract. It outlines the requirements for specific data items, including their titles, descriptions, submission frequencies, and distribution.

• Data Item Title: CONFERENCE MINUTES (A007)
• System/Item: Propulsor Duct Machining
• Authority: DI-ADMN-81250B
• Distribution Statement: D (Limited to DOD and DOD contractors; critical technology; export-restricted).
• Submission Frequency: ASREQ (As Required).
• First Submission: Within 5 working days after each meeting.
• Distribution: VACL Prop SharePoint (Final copies).

This CDRL indicates that "Conference Minutes" are a required data deliverable for the "Propulsor Duct Machining" system. Bidders should note the specific distribution limitations and the requirement for timely submission of minutes following meetings. This information is relevant for understanding the contractor's reporting and communication obligations under the contract.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by the contractor under a contract. It outlines the specific data items, their titles, and associated requirements for submission and distribution.

• Data Item Title: CONFERENCE AGENDA (A006)
• System/Item: Propulsor Duct Machining
• Authority: DI-ADMN-81249B
• Distribution Statement: D (Limited to DOD and DOD contractors; critical technology; subject to export restrictions).
• Submission Requirement: First submission due 5 working days prior to the scheduled meeting date.
• Distribution: To VACL Prop SharePoint (Final copies).

This CDRL indicates that a "CONFERENCE AGENDA" is a required data deliverable for the "Propulsor Duct Machining" system. Bidders should note the distribution limitations and the requirement for the agenda to be submitted five working days before a scheduled meeting. This suggests that a conference or meeting is a planned part of the contract's performance.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation N00016725R0001, clarifying requirements, provided documents, and timelines.

• Work Instructions, Procedures, Fixtures, and CDRLs: All requested work instructions, procedures, required fixtures, and CDRLs (listed in Section J) have been provided as part of Amendment 2.
• Bill of Materials (BOM): No BOMs are provided; vendors must refer to drawings to identify required parts.
• Kit Drawings: Drawings for the Columbia Class AOS Assembly Kit (DWG: 324557000), Columbia Class Fastener Kit AOS FWD ASSY Attachment (DWG: C24553000), and Columbia Class Threaded Plug Alignment Pin Thread Insert (DWG: 324557007) have been included in Amendment 2.
• Lifting & Handling Plug Drawing: Drawing No. V24557300 has been included in Amendment 2.
• A4 Manual Drawing: Drawing No. P24500000 (Columbia Class Propulsor Preservation Instruction Core Manual) has been included in Amendment 2.
• GFM Dates: Government Furnished Material (GFM) casting will be available after contract award. Specific dates will be finalized prior to award.
• Columbia Class Aft Casting Weight: The Aft casting is expected to weigh between 60,000 – 70,000 lbs as shipped, with approximately .125” of excess on all surfaces.
• Drawing No. 324551100: This is not a drawing associated with the solicitation. Drawing No. 324551110 has been uploaded, along with drawing No. 324557000 and referenced mono-detailed drawings in Amendment 2.

Amendment 2 has been issued to incorporate many of the requested documents and clarifications. Vendors should review Amendment 2 for updated information. The bid due date remains March 2, 2026, with GFM availability after contract award.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered under a contract. It outlines the requirements for specific data items, including their titles, descriptions, submission dates, and distribution.

• Data Item No. A011: CERTIFICATION/DATA REPORT
• Subtitle: SUBMISSION OF DATA ISSUED UNDER PRIOR CONTRACT
• Authority: DI-MISC-80678
• Requiring Office: NSWCCD Code 808
• Submission: Data must be submitted as necessary, no later than 30 days after determination that data was previously submitted under a government contract.
• Remarks (Block 4): Submission requires OQE to verify data cited under previous contracts and demonstrate it meets current contract requirements.
• Remarks (Block 9): Contains information exempt from mandatory disclosure under FOIA and is subject to export restrictions. Distribution is limited to DOD and DOD contractors.

This CDRL details specific data deliverables required from the contractor. Bidders should review the requirements for data item A011, particularly the conditions for submitting data previously provided under other contracts and the distribution limitations, to understand their potential data submission obligations and any associated costs or compliance requirements.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items required from a contractor. It outlines the specific data items, their titles, and associated requirements for a particular contract line item (CLIN).

• System/Item: Propulsor Duct Machining
• Contract Line Item Number (CLIN): TBD
• Data Item Title: REQUEST FOR VARIANCE (VACCS) Virginia Class Configuration Control System
• Authority: DI-SESS-80640D
• Requiring Office: NSWCCD Code 808
• Remarks: Details the use of a Request for Variance (RFV) for authorizing alternate configurations of non-conforming material. It specifies submission requirements, timelines for feedback and approval, and distribution limitations for technical data.

This CDRL indicates that the contractor will be required to submit requests for variance for the Propulsor Duct Machining system. Bidders should note the process and requirements for submitting these variance requests as outlined in the remarks, particularly regarding technical, operational, and fit-up impacts, as well as submission timelines and approval processes.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by a contractor. It outlines the specific data requirements for the "Propulsor Duct Machining" system.

• Data Item: A009, "PROJECT PLANNING CHART"
• System/Item: Propulsor Duct Machining
• Authority: DI-MGMT-80507C NOT 1
• Frequency: Monthly
• First Submission: 30 days after contract award
• Subsequent Submissions: Every 30 days thereafter.
• Format: Microsoft Project format only.
• Distribution: Distribution Statement D (Limited to DOD and DOD contractors; critical technology). Export is restricted by the Arms Export Control Act.
• Destruction Notice: Destroy by any method that will prevent disclosure of contents or reconstruction.

This CDRL details a specific deliverable required under the contract: a Project Planning Chart. Bidders should note the required format (Microsoft Project), submission frequency (monthly), and strict distribution and destruction requirements. This information is crucial for understanding the contractor's reporting and planning obligations.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies the data items required from a contractor. It outlines the specific reports and information the contractor must provide to the government.

• Data Item Number (DID): A008
• Title: CONTRACTOR'S PROGRESS, STATUS AND MANAGEMENT REPORT
• Subtitle: WEEKLY STATUS REPORT
• Frequency: Weekly
• First Submission: Second Tuesday after contract award.
• Subsequent Submissions: Every 7 days after initial submittal.
• Content Requirements: The Weekly Status Report must include status of all CCRs, DD250s, pending shipments, delivery orders, and any outstanding discussion items. It must also include a table of planned/contractual/actual start and finish dates for tasking at the weld/machine micro-task level.
• Distribution Statement: D (Distribution limited to DOD and DOD contractors only; Critical technology).

This CDRL details the reporting requirements for the contractor, specifically the weekly status report. Bidders should note the frequency, content, and submission deadlines for this report, as it is a key deliverable and communication tool throughout the contract lifecycle. The distribution statement also indicates the sensitive nature of the data.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) detailing a specific data item required for the "Propulsor Duct Machining" system.

• Data Item Number: A005
• Title: Welding Procedure Qualification Test Report
• Subtitle: Welding Qualification
• Authority: DI-MISC-80508B
• Requiring Office: NSWCCD Code 808
• Standards: Conformance with MIL-STD-278F, 1688, 1689, and referenced drawings.
• Submission Requirements: A draft is to be submitted 60 days before approval is required, with a 14-day government review period. Final submission is required 15 days after government approval of comments to the draft.
• Distribution: Limited to DOD and DOD contractors only; critical technology.

This CDRL specifies the requirement for a "Welding Procedure Qualification Test Report" for the "Propulsor Duct Machining" system. Bidders should note the specific standards (MIL-STD-278F, 1688, 1689), submission timelines (draft and final), and distribution limitations. This indicates a need for qualified welding procedures and the associated documentation as part of the contract deliverables.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by a contractor. It outlines the requirements for specific data items, including their titles, submission frequencies, and distribution instructions.

• Data Item Title: "Welding Procedures" (A004)
• Authority: DI-MISC-80875
• System/Item: Propulsor Duct Machining
• Requirements: Approval based on conformance with MIL-STD-278F, 1688, 1689, and referenced drawings. Drafts are due 60 days before approval is required, with 14 days for government review. Approval is based on meeting contractual drawing requirements.
• Distribution Statement D: Information is exempt from mandatory disclosure under FOIA and is limited to DOD and DOD contractors. Other requests will be referred to NAVSEA Submarine Propulsor Technical Warrant Holder.
• Export Restrictions: Contains technical data restricted by the Arms Export Control Act and Executive Order 12470.
• Submission: Welding procedures are required for each procedure used and must be submitted 30 days before approval is required. Submittals are to be issued on the VIRGINIA Class SharePoint site.

This CDRL details the specific requirements for "Welding Procedures" (Data Item A004) related to the "Propulsor Duct Machining" system. Bidders need to understand these requirements, including the applicable standards (MIL-STD-278F, 1688, 1689), submission timelines, and the restricted nature of the data, to accurately price and plan for proposal submission.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) for a specific data item (A002) related to the "Propulsor Duct Machining" system. It outlines the requirements for an "Inspection and Test Plan."

• Data Item Number: A002
• Title: Inspection and Test Plan
• System/Item: Propulsor Duct Machining
• Authority: DI-NDTI-80566A
• Distribution Statement: D (Distribution limited to DOD and DOD contractors only; Critical technology).
• Submission Requirements: Draft to be submitted 30 days after contract award (DACA). Government review is 15 days. Subsequent submissions are required NLT 30 days after a change to the approved plan is identified.
• Approval: Government approval is required and will be in writing.

This CDRL specifies a required deliverable: an Inspection and Test Plan. Bidders need to understand the submission timelines, review periods, and the critical nature of this document, especially regarding its distribution limitations and export restrictions. It indicates a key component of the contract that requires contractor development and government approval.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by the contractor under a contract. It outlines the technical reports, studies, and services required, along with their submission details.

• Data Item Number (DID): DI-MISC-80508B
• Title: Technical Report-Study/Services
• Subtitle: VCS Propulsor Duct Manufacturing Plan
• Submission Frequency: 30 days after first submission, with subsequent submissions based on Government commentary.
• Approval Process: A preliminary draft is required, with Government review and comment expected within five business days. Final approval follows content review.
• Distribution: Information is to be distributed electronically via DoD SAFE (Secure Access File Exchange).

This CDRL details a specific deliverable required from the contractor: a manufacturing plan for the VCS Propulsor Duct. Bidders should review this document to understand the reporting and documentation requirements associated with this specific data item, including submission timelines, approval processes, and distribution methods. This information is crucial for accurately estimating the effort and cost associated with fulfilling contract data requirements.

Questions & Answers / Clarifications

This document provides clarifications and answers to vendor questions regarding Solicitation N0016725R0005, addressing discrepancies in attachment references, drawing details, and procedural requirements.

• Attachment References: Clarified that Attachment 3 is the Past Performance Reference and Attachment 6 is the Past Performance Questionnaire. Attachment headers have been corrected in Amendment 1.

• Drawing References: Several missing or incorrectly referenced drawings (e.g., Reference (a), (b), (c), (d), V24551110 Rev B/C, P24551100, P245F0000) have been provided or updated via Amendment 1. Some confidential drawings require mailing.

• Technical Scope: Pre-HYSHMA paint scope for COLUMBIA AOS has been removed. Chemlok primer installation is no longer within scope.

• Classified Information: Access and storage of classified information require a DD254 on file, with flow-down requirements identified within the DD254.

• As-Cast Condition Sketches: These are unavailable.

• CCR and PER Access: Applicable CCRs are available via the VIRGINIA Class Configuration Control System (VACCS) upon request. PERs will be uploaded with Q&A responses.

• Proposal Submission: Quotes are to be submitted for V24551110 Rev C plus CCR 3889.

• GFM Casting Availability: First VCS GFM casting estimated Feb 26, 2026; first CLB GFM casting estimated April 27, 2026.

• Travel CLIN: A CLIN will be provided for cost-only travel bids.

• NFPC Documents: Work instructions, procedures, and fixtures for handling, machining, and assembly of CLB and Virginia Rotor Rings are being provided.

• Assembly Hardware/Support: No established preferred suppliers for hardware; no specific vendors required for assembly support.

• Amendment 1 has been issued to incorporate many of these clarifications and corrections.

• An extension of 30 days from the date of misalignment correction will be provided.

• A CLIN for cost-only travel will be added.