Purchase, Removal and Installation of a 100kw Propane Generator

Questions & Answers / Clarifications

This document provides answers to vendor questions regarding the "12444226Q0002: Purchase, Removal and Installation of a 100kw Propane Generator" opportunity.

• Site Visit: To schedule a site visit, contact Jasin Wesberry at 601-300-1171.
• Existing Generator Details: The currently installed generator is a Generac 100kw, 3 phase, 120/240v, fueled by liquid propane, with an ASCO 600-amp service entrance rated transfer switch. A 1000-gallon LP tank and connections are already on site. The Serial Number is 3005051834, and the Model Number is QT10068AVAC.
• Fuel Piping and Connections: No fuel piping modifications, regulators, or pressure testing will be required. The connection will be to an existing, ready-to-use stub-out, as everything is on-site and ready for hookup.

This Q&A clarifies site visit procedures, details of the existing generator and fuel system, and confirms that no modifications to the fuel piping are needed, simplifying the installation process for bidders.

Statement of Work (SOW) / Performance Work Statement (PWS)

To replace an existing 100kw generator with a new 100kw propane generator at the Bude Work Center Facility, Homochitto National Forest, Meadville, MS.

• Provide all materials, labor, equipment, tools, transportation, permits, licenses, supervision, and expertise for the removal of the existing generator and installation of a new RG10090AVAC Protector Gaseous 120/240 Single Phase Liquid Cooled Generator.

• Install equipment, including rental of a 6526R battery, connecting to the existing electrical transformer/components.

• Hook up existing propane fuel to the new generator.

• Clean up the site and dispose of removed materials off Forest Service property at the Bude Workcenter.

• Normal Work Hours: 7:30 AM – 4:00 PM, Monday through Saturday.

• The work location is the Bude Work Center, Homochitto National Forest, Franklin County, MS.

• Contractor must inform the district 2 days prior to beginning work.

• Contractor must use necessary Personal Protective Equipment (PPE).

• Contractor must prevent damage to outdoor structures, hardware, and signs, and correct any damage caused at their own expense.

• Contractor must have a written Quality Control Program submitted no later than 5 days prior to the contract start date.

• Contractor must provide reports and job-related data within 3 business days of request.

• Contractor must provide a comprehensive list of employees, by contract location, prior to the start of the contract, including contact phone numbers and proof of training.

• Contractor is responsible for providing replacement personnel immediately if needed.

• The government will provide Government Furnished Equipment/Supplies as applicable.

• All work must be completed using best safety requirements.

• Periodic progress meetings will be held to discuss contractor performance.

Forms / Attachments / Pricing Sheets

This document is a U.S. Department of Labor Wage Determination (No. 2015-5173, Revision 33) for the state of Mississippi, specifically for the counties of Adams, Amite, Claiborne, Franklin, Jefferson, Lawrence, Lincoln, Pike, Walthall, Warren, and Wilkinson. It establishes the minimum wage rates and fringe benefits required for various occupations under the Service Contract Act.

• Lists numerous occupational codes and titles, ranging from administrative support and clerical to health, technical, and maintenance occupations.
• Specifies the minimum hourly wage rate for each occupation.
• Indicates that fringe benefits are required and follow the occupational listing.
• Includes notes on Executive Orders related to paid sick leave and minimum wage rates for federal contractors.
• Details provisions for vacation, holidays, hazardous pay differentials, and uniform allowances.
• Outlines the conformance process for unlisted classifications.

This document is crucial for bidders to understand the labor costs associated with performing services under a federal contract in the specified geographic area. It dictates the minimum wages and benefits that must be paid to employees, directly impacting the cost proposal and overall bid competitiveness. Bidders must ensure their proposed wages and benefits meet or exceed these requirements.

Form / Attachment / Pricing Sheet

This document is Exhibit B, a Performance Relevancy Questionnaire. It is designed to gather information from potential offerors regarding their past and current projects, as well as their specialized experience, to assess their capability to perform the work contemplated by the solicitation.

• Part 1 - Past / Current Projects: Requires listing up to five projects completed within the last three years that are similar in scope to the solicitation. Information requested includes Contract Amount, Type of Project, Date Completed, and Contact Person for Project Information.
• Concurrent Contractual Commitments: Requires listing all current contractual commitments, including Contract Number, Dollar Amount of Project, Name/Address/Phone of Business/Govt. Agency, Awarded Units, % Completed, and Date Contract Completed.
• Past Performance Questions: Asks if the offeror has ever failed to complete work awarded or if work was completed via performance bond, requiring details if affirmative.
• Part 2 - Specialized Experience: Requires a separate sheet to describe specific elements of work performed, identify subcontractors and their role, highlight technically relevant areas to the solicitation, and provide a Point of Contact for the project.
• Certification: A statement by the certifying official attesting to the completeness and correctness of the information provided and authorizing the Forest Service to verify capability.

Bidders must complete this questionnaire accurately and thoroughly. The information provided will be used to evaluate their past performance and specialized experience, which are critical factors in determining their relevancy and capability to perform the work described in the solicitation. Failure to provide complete information may impact the evaluation of the proposal.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, issued as a Request for Quotation (RFQ) for the Purchase, Removal, and Installation of a 100kw Propane Generator. The acquisition is set-aside for small business concerns.

• Remove existing generator.

• Replace with RG10090AVAC Protector Gaseous 120/240 Single Phase Liquid Cooled Generator with 6526R battery.

• Hook up to existing electrical and fuel system.

• See attached Statement of Work (SOW) for detailed requirements.

• Award Type: Firm Fixed Price Purchase Order.

• Period of Performance: Not explicitly stated, but implied by the need for removal and installation.

• Estimated Value: Not stated.

• Quotes are due February 06, 2026, at 1600 Central Time.

• Submission Method: Email to John Camacho (john.camacho@usda.gov).

• Subject Line: Must include "12444226Q0002".

• Evaluation Criteria: Award will be made to the offeror with the highest technically rated quotation with fair and reasonable pricing and acceptable or neutral past performance. Evaluation will be based on lowest price technically acceptable criteria.

• Technical Approach: Evaluates the ability to provide a sound and compliant approach, including planned approach, schedule, and key personnel qualifications.

• Price: Includes the complete Schedule of Items and acknowledgement of amendments. Will be evaluated for fairness and reasonableness.

• Past Performance: Assessed using references, USDA data, CPARS, and rated as Acceptable, Neutral, or Unacceptable.

• Period for acceptance of offers: 90 calendar days from the date specified for receipt of offers.

• Total Small Business Set-Aside.

• Applicable NAICS Code: 221118.

• Small Business Size Standard: 650.

• A separate written solicitation will not be issued.

• Full text of provisions and clauses may be accessed electronically at www.acquisition.gov.

• Site visit will be scheduled upon request.

• Delivery FOB Destination: Bude Workcenter, 3085 Highway 98E, Meadville, MS 39653.

• Questions are due by January 30, 2026, at 1600 PM Central Time, via email to john.camacho@usda.gov.

• Attachments include: Wage Determination No: 2015-5173, Rev. 33; Statement of Work (SOW); Past Performance Questionnaire.

Solicitation / RFP / RFQ

This solicitation is for the purchase, removal, and installation of a RG10090AVAC Protector Gaseous 120/240 Single Phase Liquid Cooled Generator with 6526R battery. The contractor will be responsible for providing all necessary materials, labor, equipment, tools, transportation, permits, licenses, supervision, expertise, and other incidentals to complete the project.

• Removal of an existing generator.

• Installation of a new RG10090AVAC Protector Gaseous 120/240 Single Phase Liquid Cooled Generator with 6526R battery.

• Connection of the new generator to the existing electrical and fuel systems.

• Site cleanup and disposal of removed materials from the Bude Work Center.

• Detailed requirements are further specified in the Statement of Work (SOW).

• Contract Type: Commercial Items

• Period of Performance: February 2, 2026, to September 30, 2026.

• Delivery: 30 Days After Receipt of Order.

• Offer Due Date: January 16, 2026, 1100 CT.

• The solicitation incorporates FAR 52.212-1, 52.212-4, and 52.212-5 by reference.

• NAICS Code: 221118

• Size Standard: 650

• The acquisition is set aside for Small Business (100.00%).

• The solicitation number is 1244422600002.

• The issuing office is USDA-FS CSA EAST 4, Atlanta, GA.

• The delivery location is USDA Forest Service, Homochitto Ranger District, Meadville, MS.

Form / Attachment / Pricing Sheet

This document, Exhibit A: Contractor's Financial Information Sheet, is a form required for bidders to provide general information about their business, ownership, and financial status. It is used to assess the financial viability and characteristics of potential contractors.

• Section 1: General Information: Collects basic business details including name, address, contact information, type of organization, DUNS number, and kind of business (e.g., large business, small business, woman-owned, etc.).
• Ownership Information: Requires listing of partners, principals, and their titles.
• Financial Questions: Asks about bankruptcy filings, judgments, liens, pending suits, contingent liabilities, and discontinued business operations.
• Section II: Government Financial Aid and Indebtedness: Inquires about delinquency on Federal Debt, outstanding claims owed to the Government, current Government financing, and any pending defaults on other obligations.

Bidders must accurately complete this form to provide essential information about their business structure, size, and financial standing. This data is crucial for the government's evaluation of the bidder's capacity and eligibility for the opportunity. Specific questions regarding financial aid and indebtedness require detailed information if answered affirmatively.