Replace Current Roofing System of a Two-Story House in New Orleans, LA for USCG (REV 1)

Other / Unclassified

This document is an aerial photograph of a residential rooftop, captured on February 19, 2026, at coordinates 29°59'47"N 90°6'25"W. The image was taken with a DJI Mini 2 drone, utilizing a 24mm lens at an aperture of f/2.8, a shutter speed of 1/320s, and an ISO of 100.

This image may be relevant to bidders assessing the condition or characteristics of a property's roof. It provides a visual record of the roof's structure, materials, and any visible features such as chimneys or vents. This type of visual data could be used for preliminary assessments in opportunities related to property maintenance, repair, or inspection services.

Other / Unclassified

This document is an aerial photograph of a residential property, captured on February 19, 2026, at coordinates 29°59'47"N 90°6'26"W. The image was taken with a 24mm lens at f/2.8, with a shutter speed of 1/400s and ISO 100, using a DJI Mini 2 drone.

This image does not appear to be a solicitation, SOW, amendment, or Q&A document. It is likely an image attachment related to a property or site survey, potentially for a construction, maintenance, or inspection opportunity. Bidders interested in opportunities involving physical property assessment or work at this specific location may find this image relevant for initial site familiarization.

Form / Attachment / Pricing Sheet

This document appears to be an image containing a "Johnson Pitch & Slope Locator" tool, along with GPS coordinates. It is likely an attachment or evidence related to a site inspection or work performed under a government contract.

• The image displays a pitch and slope measuring tool, indicating measurements in degrees and "pitch-inch rise per 12-inch run."
• GPS coordinates are provided: 29.996413° N 90.107017° W.

This type of image, if provided as an attachment to a solicitation or SOW, would likely be used to document existing conditions, verify measurements, or demonstrate compliance with specific site requirements. Bidders should review any associated contract documents to understand how such measurements or site conditions are relevant to the scope of work or evaluation criteria.

Other / Unclassified

This document is a JPEG image containing a photograph of an insulated ceiling space. A tape measure is extended across the space, indicating measurements from approximately 31 inches to 51 inches. The image also shows ductwork and electrical wiring. GPS coordinates are visible in the lower right corner: 29.996413° N 90.107017° W.

This image may be relevant to a bidder by providing visual context for the physical conditions of a space, potentially related to construction, renovation, or inspection opportunities. The measurements and visible infrastructure (insulation, ductwork, wiring) could inform site assessment or scope of work for a project.

Form / Attachment / Pricing Sheet

This document is a Pre-Site Inspection Questionnaire used by the Louisiana Fortify Homes Program (LFHP) to determine if a home is mitigable and eligible for the program. It collects information about the property and its existing conditions to assess its suitability for FORTIFIED standards.

• Owner/Insured Information: Name, contact details, and property address.
• Property Details: Year of construction, property type (manufactured, single-family, duplex, townhome), and geocode.
• Eligibility Questions: A series of yes/no questions covering:
  • Home type (manufactured/condo, single-family/duplex/townhome)
  • Foundation type and compliance with minimum requirements
  • Roof framing and deck minimum requirements
  • Presence and type of gutters and gutter guards
  • Attached structures impacting roof details
  • Roof-mounted items (tile, vents, equipment, solar panels)
  • Obvious structural deterioration or code compliance issues
  • Proximity to saltwater shoreline
• Comments Section: For specific notes on roof deck, gutters, and satellite dishes.
• Evaluator Certification: Signature and email of the FORTIFIED Evaluator.

This form is crucial for understanding the initial assessment criteria for homes seeking FORTIFIED designation through the LFHP. Bidders involved in home mitigation or re-roofing projects under this program would use this to understand property eligibility, potential challenges, and specific FORTIFIED requirements that must be met. The questions directly relate to the scope of work and potential complexities of a project.

Questions & Answers / Clarifications

This document provides answers to vendor questions regarding the roofing requirements for an unspecified opportunity. A site visit is mandatory, scheduled for February 25th at 1000.

• Roofing Manufacturer: Any manufacturer is acceptable if the product meets the specified criteria (30-year architectural shingles, UL 2218 Class 3 impact rating, IBHS FORTIFIED compliance). Standard workmanship and manufacturer warranties are expected; enhanced warranties are not required.
• Existing Roof Assembly: Spray foam insulation is present, and the attic is considered unconditioned. Product warranties should not be limited by this condition.
• IBHS FORTIFIED Compliance: The required designation is 'Roof'. A third-party evaluator has completed the initial inspection, and the USCG will submit documentation through them. Contractors must work with the inspector and utilize the Company Cam program for documentation.
• Flashing and Edge Metal: Metal drip edge must be a minimum 26-gauge steel, extending ½” below sheathing and 2’ back on the roof deck. All other flashing must be new. Fastening patterns and wind resistance should adhere to the FORTIFIED Hurricane 2025 standard.

These clarifications provide specific details on material requirements, warranty expectations, compliance levels, and installation standards, which bidders must incorporate into their proposals.

Statement of Work (SOW)

To replace the current roofing system with an Insurance Institute for Business & Home Safety (IBHS) FORTIFIED roofing system at the Heartland District REPFAC located at 5830 Memphis Street, New Orleans, LA 70124.

• Complete removal and disposal of the existing roofing system down to the decking.

• Inspection of the decking and replacement as needed.

• Replacement of flashing on all valleys, walls, and penetrations.

• Replacement of boots on plumbing and vent penetrations.

• Installation of a new IBHS/FORTIFIED roofing system compatible with the existing closed-cell foam insulation system.

• All work must comply with applicable state building codes, industry standards, and IBHS/FORTIFIED certification standards.

• All work must meet IBHS/FORTIFIED roofing standards.

• Final inspection and results to be submitted to the COR via email.

• Location: 5830 Memphis Street, New Orleans, LA 70124.

• Work hours: Monday through Friday, 8:00 AM to 4:00 PM, unless otherwise approved.

• Contractor must be state-licensed.

• Materials must be delivered in original unopened packages and stored appropriately.

• Contractor is responsible for work site safety and must implement a safety program.

• Environmental compliance is required, including proper disposal of waste and pre-approval of chemicals.

• A site visit is required.

• Submittals required include work schedule, quote for additional repairs, manufacturer and warranty information, inspection results, shingle selection, lien waiver, and IBHS/FORTIFIED roof certification.

• The contractor shall minimize impact on facility operations.

Other / Unclassified

This document contains "Invoice Instructions" for submitting proper invoices through the Invoice Processing Platform (IPP). It details the process for vendors already enrolled in IPP and those who are not. It also provides contact information for IPP Customer Support.

This document is crucial for bidders as it outlines the mandatory electronic invoicing system (IPP) that will be used for payments under the contract. Understanding this process is essential for timely and accurate invoice submission and payment.

Other / Unclassified

This document is a General Decision Number (LA20260041) issued by the U.S. Department of Labor, Wage and Hour Division, detailing prevailing wage rates for various construction-related classifications in Orleans County, Louisiana. It specifies hourly rates and fringe benefits for trades such as Asbestos Worker, Electrician, Elevator Mechanic, Power Equipment Operator, Ironworker, Glazier, Painter, Cement Mason/Concrete Finisher, Pipefitter, Plumber, Sheet Metal Worker, Bricklayer, Carpenter, Drywall Installer, Laborer, Roofer, Sprinkler Fitter, Tile Setter, Truck Driver, and Welder.

It also includes notes on Executive Order (EO) 13706 (Establishing Paid Sick Leave for Federal Contractors) and Executive Order 13658 (Establishing a Minimum Wage for Federal Contractors), outlining their applicability and requirements. The document further explains the process for wage determination appeals.

This document is crucial for bidders on federal construction projects in Orleans County, Louisiana, as it establishes the minimum prevailing wage rates and fringe benefits that must be paid to laborers and mechanics employed on such projects. Bidders must use this information to accurately estimate labor costs and ensure compliance with federal labor standards, which is a critical component of proposal preparation and contract execution.

Solicitation / RFP / RFQ

This solicitation is for the replacement of the current roofing system of a two-story house located in New Orleans, LA. The work is to be performed in accordance with the provided scope of work. The government requires this work to be completed by qualified individuals or firms.

• Replacement of the existing roofing system on a two-story house.

• Work must be completed in accordance with the specified scope of work.

• Offerors are strongly encouraged to visit the facility for field measurements and to become familiar with existing conditions prior to submitting a quote.

• This will be a firm-fixed priced purchase order.

• The contract will be awarded to the lowest price technically acceptable offer.

• Evaluation factors include: Price, Technical Acceptability, and Past Performance.

• Quotes must be submitted to Joel.S.Ivy@uscg.mil.

• Offers are due by the time and date listed in the solicitation.

• Performance is to begin within 14 calendar days of award and complete within 30 calendar days of notice to proceed.

• This opportunity is set aside 100% for small business.

• All contractors must be actively registered in SAM.gov.

• Offerors must complete the "Offer" section on the reverse of the form.

• Performance and Payment Bonds are not required (marked NO).

• An offer guarantee is not required.