AMENDMENT 02: Replace Site Lighting Electrical Conduits at 5 LFs

Amendment / Modification

This document is Amendment 02 to the Request for Proposal (RFP) for Project GHLN26-6277, "Replace Site Lighting Electrical Conduits at 5 LFs". It provides updates and clarifications to the original solicitation.

Key changes and information include:

• Statement of Work (SOW): Bidders must submit proposals based on Attachment 1, Statement of Work (SOW) Rev 1, dated April 13, 2026.
• NIST SP 800-171 / CMMC Assessment: Offerors must submit Attachment 3 MFR CUI Control and Receipt, affirming completion of a NIST SP 800-171 Assessment or equivalent Level 2 CMMC Assessment. A plan of improvement is required if the NIST SP 800-171 score is below 110. Offerors without a basic NIST SP 800-171 assessment or CMMC Level 2 are ineligible for award.
• Magnitude: The estimated contract value is between $100,000 and $250,000.
• Wage Determination: The Davis Bacon Act Wage Determination classification is "BUILDING" (Attachment 4).
• Bid Guarantee: FAR 52.228-1 Bid Guarantee is included. A bid guarantee of 20 percent of the bid price or $N/A (whichever is less) is required. Actual bonding is not required until after award.
• Bonding Requirements: Payment Bonds and Alternative Payment Protections are required IAW FAR 28.102. Performance bonds are required for orders of $150,000.00 and above. Payment protection is required for orders greater than $35,000.00 but not greater than $150,000.00.
• Site Visit: Scheduled for Tuesday, April 14, 2026, at 9:00 am MDT at Gate 2 Parking Lot, F.E. Warren AFB, WY. Driver's License images must be submitted by 3:00 pm MDT on Monday, March 16, 2026, to be placed on the Entry Authorization List (EAL).
• Questions Due: Wednesday, April 15, 2026, by 11:00 am MDT. Submit via email to Megan Evans or SSgt Kyra Niece.
• Proposal Due Date: Monday, April 27, 2026, no later than 11:00 am MDT. Utilize Attachment 6 for Cost Estimate Breakdown.
• Acceptance Period: 60 calendar days from Government's proposal receipt.

This amendment modifies the original solicitation by providing updated attachments and specific instructions regarding SOW, security assessments, bid guarantees, site visits, and submission deadlines.

Proposal deadlines, submission requirements (including security assessment documentation), and site visit procedures have been updated. Offerors must adhere to the revised dates and requirements outlined in this amendment.

Questions & Answers / Clarifications

This document provides clarification regarding the scope of work for the "GHLN 26-6277 Replace Site Lighting Electrical Conduits at 5 LFs" opportunity, specifically addressing questions related to conduit sizing and installation.

• Question 1: A bidder inquired about using existing conduit sizes (1" from LSB to pole, ¼" from LSB to switch) instead of the specified 1 ½" PVC coated ridged conduit for Item C of the SOW.
• Answer 1: The government agrees to the proposed course of action, allowing the use of ¼" conduit from LSB to switch and 1" conduit from LSB to the light pole. This clarification pertains to Attachment #7 of the solicitation.

This clarification confirms the acceptance of existing conduit sizes for specific segments of the work, potentially impacting material procurement and installation methods for bidders.

Statement of Work (SOW)

This project involves replacing site lighting electrical conduits at five (5) Launch Facilities (LFs) under the control of F.E. Warren Air Force Base, Wyoming.

• Remove existing failed conduit and wire from LSB to light poles at all five sites. On sites H-09 and I-04, also remove wire from existing failed conduit between the LSB and the gate switch.

• Cut and cap existing conduit ends a minimum of 12 inches below grade and abandon in place.

• Install new 1-inch PVC coated rigid conduit from the LSB to the light pole at each site, buried a minimum of 36 inches deep. On sites H-09 and I-04, also install new 3/4-inch PVC coated rigid conduit from the LSB to the gate switch, buried a minimum of 36 inches deep.

• Separate and reuse top 6 inches of pad and access road gravel for backfill, or provide similar gravel.

• Excavate to avoid damaging adjacent utilities.

• Pull new wire through new conduit and connect circuits for proper operation.

• Backfill conduit trenches in 6-inch lifts, compacting to prevent settlement.

• Place electrical warning tape 18 inches above conduit during backfilling.

• Finish backfill to match existing pad materials, or use new gravel if contaminated.

• Period of Performance (PoP): 120 calendar days.

• Work will be performed at MAFs/LFs located in Colorado and Nebraska.

• Contractor must provide all labor, materials, equipment, and transportation.

• Contractor must comply with specifications, drawings, attachments, and contract terms.

• Contractor must provide submittals of manufactured items for approval prior to ordering.

• Weekly project updates and project meetings are required.

• Proposal must include lead time for materials and contractor certifications.

• Contractor must obtain necessary permits and insurance.

• Contractor must adhere to security requirements, including base access and missile field access procedures (Entry Authority Lists - EALs).

• Anti-terrorism awareness training is required for personnel with routine physical access.

• Controlled Unclassified Information (CUI) handling procedures must be followed.

• Environmental compliance with state and federal regulations is required.

• Hazardous materials (HAZMAT) must be coordinated with 90 CES Environmental.

• Safety plan compliance and provision of Personal Protective Equipment (PPE) are mandatory.

• Site conditions must be maintained, and any damage to Air Force property repaired at contractor expense.

• RFIs must be submitted to the CO for any information or solution requests impacting cost.

• Any work outside the scope of the contract must be presented to the CO.

• Post-construction "red-lined" drawings must be submitted.

• Warranties for equipment, products, goods, or services are required.

Solicitation / RFP / RFQ

This solicitation is for the "Replace Site Lighting Electrical Conduits at 5 LFs" project, located at F.E. Warren Air Force Base, Wyoming. The contractor will be responsible for providing all labor, materials, equipment, and transportation necessary to replace site lighting electrical conduits at five (5) Launch Facilities (LFs).

• Replacement of site lighting electrical conduits at five (5) Launch Facilities (LFs).

• Work must comply with specifications, applicable drawings, attachments, and industry standards.

• Contract Type: Firm Fixed-Price

• Period of Performance: 120 calendar days from the Notice to Proceed.

• Estimated Value: Not explicitly stated, but the NAICS size standard is $45,000,000.00 annual receipts.

• Proposals are due by 11:00 AM MDT on Monday, 27 April 2026, via email.

• Offers must have a valid date of 60 calendar days from the proposal receipt date.

• Evaluation Method: Lowest Price Technically Acceptable (LPTA).

• Key Deadlines:

  • Site Visit: Tuesday, 14 April 2026, 9:00 am MDT.
  • Driver's License images for site visit attendees due: Monday, 16 March 2026, 3:00 pm MDT.
  • Questions due: 11:00 am MT, the day after the site visit (or Tuesday, 17 March 2026, if no site visit).
  • Proposal Due Date: Monday, 27 April 2026, 11:00 am MDT.

• This solicitation is a 100% Small Business Set-Aside.

• NAICS Code: 236220

• Size Standard: $45,000,000.00 annual receipts.

• Offerors must be registered in SAM.gov and have an acceptable SPRS module risk profile.

• A basic NIST SP 800-171 assessment or Level 2 CMMC is required for CUI Map Layout access and eligibility for award.

• Several amendments have been issued (0001 and 0002).

• Attachments include Statement of Work, Submittal Register, CUI Map Layout, Wage Determinations, Bid Bond Form, Cost Estimate Breakdown, and Site Visit Questions & Answers.

Amendment / Modification

This amendment modifies the solicitation FA461326R0001 with the following changes:

• Updates Attachment 1, Statement of Work (SOW) to Revision 1, dated April 13, 2026.

• Updates Attachment 3, CUI Map Layout, requiring offerors to submit Attachment 3 MFR CUI Receipt and possess a NIST SP 800-171 score or Level 2 CMMC to obtain CUI documentation.

• Includes Attachment 7, Post Site Visit Question & Answer.

• Extends the proposal deadline to Monday, April 27, 2026.

• Attachment 1 (Statement of Work)

• Attachment 3 (CUI Map Layout)

• Proposal submission deadline

The proposal submission deadline has been extended to April 27, 2026. Offerors must also meet new requirements related to CUI documentation access.

Amendment / Modification

This amendment modifies the solicitation with the following changes:

• Site Visit: A site visit is scheduled for Tuesday, April 14, 2026, at 9:00 am MDT at F.E. Warren AFB, WY. Attendees must submit a driver's license image by Monday, March 16, 2026, at 3:00 pm MDT to be added to the Entry Authorization List (EAL).

• Questions Due Date: Questions are due Wednesday, April 15, 2026, by 11:00 am MDT.

• Proposals Due Date: Proposals are due Wednesday, April 22, 2026, by 11:00 am MDT.

• Delivery Lead Time: Reduced from 14 Calendar Days to 10 Calendar Days.

• Time Zone: Changed from Mountain Standard Time (UTC-7) to Mountain Daylight Time (UTC-6).

• Clause Modification: The clause 52.228-1 Bid Guarantee (Sept 1996) is incorporated in full text. The bid guarantee amount is 20 percent of the bid price and must be submitted via SF 24.

• Section A - Solicitation/Contract Form (Delivery Lead Time, Response Due Time Zone, Response Due Date)

• Section B - Supplies or Services & Prices or Costs (Line Item 0001 - minor description change)

• Section L - Instructions, Conditions, & Notices to Offerors or Quoters (Site visit details, questions due date, proposals due date, bid guarantee clause)

• Attachment List (Updated to reflect current versions of SOW, AF Form 66, CUI Map Layout, Wage Determinations, SF 24 Bid Bond Form, and Cost Estimate Breakdown)

• The deadline for proposal submission has been extended to April 22, 2026.

• The bid guarantee requirement has been clarified and specified as 20 percent of the bid price, submitted via SF 24.

Solicitation / RFP / RFQ

This solicitation is for the "Replace Site Lighting Electrical Conduits at 5 LFs" project, located in Nebraska and Colorado. The contractor will be responsible for providing all labor, materials, equipment, and transportation necessary to replace site lighting electrical conduits at five (5) Launch Facilities (LFs). The work must comply with specifications, applicable drawings, attachments, and contract terms, as well as all applicable building codes, standards, and industry practices.

• Replacement of site lighting electrical conduits at five (5) Launch Facilities (LFs).

• Compliance with specifications, applicable drawings, attachments, and contract terms.

• Adherence to all applicable building codes, standards, and industry practices.

• Contract Type: Firm Fixed Price (as indicated in Section B and Section L).

• Period of Performance (PoP): 120 calendar days.

• Estimated Value: Not explicitly stated in the provided pages, but the NAICS code 236220 has a size standard of $45,000,000.00.

• Proposal Submission Deadline: Wednesday, 22 April 2026, by 11:00 AM MDT.

• Submission Method: Electronic submission via email to megan.evans.3@us.af.mil and kyra.niece@us.af.mil.

• Offer Validity: 60 calendar days from the date of proposal receipt.

• Evaluation Method: Lowest Price Technically Acceptable (LPTA).

• Evaluation Factors:

  • Factor 1 (Price): Equally important as technical acceptability. Offers will be ranked by price.
  • Factor 2 (Technical): Technical acceptability is equally important as price. The lowest priced offer will be evaluated for technical capability.

• Key Milestones:

  • Site Visit: Tuesday, 14 April 2026, at 9:00 am MDT.
  • Questions Due: Tuesday, 17 March 2026 (if no site visit) or the day after the site visit.

• This solicitation is a 100% Small Business Set-Aside.

• Offerors must be registered in SAM.gov and meet the small business size standard for NAICS code 236220 ($45,000,000.00 annual receipts).

• Offerors must have an acceptable supplier risk profile in SPRS module.

• A basic score in NIST SP 800-171 or Level 2 in CMMC is required for award eligibility.

• Attachments include Statement of Work, Submittal Register, CUI Control & Receipt, NIST SP 800-171 Assessment and Entry Guide, Wage Determinations, SF 24 Bid Bond Form, Cost Estimate Breakdown, Request for Proposal, and Amendment 01.

• A Bid Guarantee (SF 24 Bid Bond Form) is required with the proposal.

• Proposals with a PoP greater than 120 calendar days will be considered technically unacceptable.

Amendment / Modification

This document is Amendment 01 to the Request for Proposal (RFP) for Project GHLN26-6277, "Replace Site Lighting Electrical Conduits at 5 LFs". It provides updated information and requirements for potential bidders.

• Attachment 1 Statement of Work (SOW): Bidders must include all contract materials and workmanship as specified in the SOW dated 18 December 2025.

• Attachment 2 AF Form 66: Required for submittals.

• Attachment 3 CUI Map Layout: Requires submission of MFR CUI Control and Receipt to affirm NIST SP 800-171 Assessment completion or equivalent Level 2 CMMC Assessment. Offers with a NIST SP 800-171 score below 110 must submit a plan of improvement. Offers without a NIST SP 800-171 basic assessment or CMMC Level 2 are ineligible for award.

• Attachment 4 Combined Wage Determinations: Specifies the Davis Bacon Act Wage Determination classification as "BUILDING".

• Attachment 5 SF 24 Bid Bond Form: Bidders must furnish a bid guarantee as prescribed by FAR 52.228-1. The amount is 20 percent of the bid price or $N/A, whichever is less. Failure to execute contractual documents or furnish bonds within 10 days of acceptance may result in termination for default.

• Bonding Requirements: Payment Bonds and Alternative Payment Protections for Construction Contracts are required IAW FAR 28.102. Performance bonds are required for delivery/task orders of $150,000.00 and above. Payment protection is required for orders greater than $35,000.00 but not greater than $150,000.00.

• Site Visit: Scheduled for Tuesday, 14 April 2026, at 9:00 am MDT. Attendees must provide a Driver's License image by 3:00 pm MDT on Monday, 16 March 2026, for an Entry Authorization List (EAL).

• Questions Due: Wednesday, 15 April 2026, by 11:00 am MDT.

• Proposal Submission Deadline: Wednesday, 22 April 2026, by 11:00 am MDT. Offers must have an acceptance period of 60 calendar days.

• Attachment 6 Cost Estimate Breakdown: To be utilized for proposal pricing.

• Evaluation Factors: Price is as equally important as technical acceptability. The Government will rank offers by price and then evaluate the lowest priced offer for technical capability. If technically unacceptable, the next lowest priced offer will be evaluated.

• Subfactor 1 – Work Plan: Must demonstrate ability to complete the project within the 120-day Period of Performance (PoP). Proposals exceeding 120 days are technically unacceptable.

• Subfactor 2 – Bid Guarantee/Bonding: A bid guarantee (SF 24 Bid Bond Form) is required at proposal submission. Actual bonding is not required until after award.

Solicitation / RFP / RFQ

This solicitation is for the "Replace Site Lighting Electrical Conduits at 5 LFs" project, located in Nebraska and Colorado. The contractor will be responsible for providing all labor, materials, equipment, and transportation necessary to replace site lighting electrical conduits at five (5) Launch Facilities (LFs). The project requires strict compliance with specifications, applicable drawings, attachments, and contract terms, as well as all applicable building codes, standards, and industry practices.

• Replacement of site lighting electrical conduits at five (5) Launch Facilities (LFs).

• Compliance with specifications, applicable drawings, and attachments.

• Adherence to all applicable building codes, standards, and industry practices.

• Contract Type: Firm Fixed Price Construction Contract.

• Period of Performance: 120 calendar days from the date of Notice to Proceed.

• Estimated Value: Not explicitly stated, but the NAICS code 236220 has a size standard of $45,000,000.00 annual receipts.

• Proposal Submission Deadline: Thursday, 26 March 2026, by 11:00 AM MT.

• Submission Method: Email only to megan.evans.3@us.af.mil and kyra.niece@us.af.mil.

• Evaluation Method: Lowest Price Technically Acceptable (LPTA).

• Evaluation Factors:

  • Factor 1 (Price): Equally important as technical acceptability. Offers will be ranked by price.
  • Factor 2 (Technical): Equally important as price. The lowest priced offer will be evaluated for technical acceptability.

• Key Milestones:

  • Site Visit Request Deadline: Thursday, 12 March 2026.
  • Questions Due: Day after site visit, or Tuesday, 17 March 2026 if no site visit is requested.
  • Proposal Due Date: Thursday, 26 March 2026.

• This requirement is a 100% Small Business Set-Aside.

• Offerors must be registered in SAM.gov and meet the small business size standard for NAICS code 236220 ($45,000,000.00 annual receipts).

• A Bid Guarantee (SF 24 Bid Bond Form) is required with the proposal.

• Attachments include Statement of Work, Submittal Register, CUI Control & Receipt, NIST SP 800-171 Assessment and Entry Guide, Wage Determinations, SF 24 Bid Bond Form, and Cost Estimate Breakdown.

• Davis Bacon Act Wage Determinations apply.

• Proposals with a period of performance greater than 120 calendar days will be considered technically unacceptable.

Form / Attachment / Pricing Sheet

This document is a Memorandum for Record (MFR) detailing the receipt and requirements for handling Controlled Unclassified Information (CUI) related to Project Number GHLN 26-6277, "Replace Site Lighting Electrical Conduits at 5 Launch Facilities (LFs)". It serves to record the acknowledgment of receipt of CUI material and outlines the responsibilities and methods for its safeguarding and destruction.

• CUI Safeguarding: Vendors must acknowledge and agree to safeguard CUI material associated with the project.
• Release Restrictions: Public release or reproduction of the material is prohibited except for official use.
• Destruction Requirements: CUI must be destroyed using approved methods, such as cross-cut shredders producing 1mm x 5mm particles or smaller, or disintegrators with a 2.4mm security screen.
• Security Standards: Compliance with specific regulations and publications is required, including 32 CFR Part 170, 48 CFR 52.204-21, NIST SP 800-171 (Rev. 2), and NIST SP 800-172.
• Eligibility for CUI: Release of CUI documents is contingent upon vendors demonstrating compliance with DFARS 252.204-7021 by completing the assessment/CMMC in the Supplier Performance Risk System (SPRS). A NIST SP 800-171 score of 110 within the last three years is required, or a plan of action to attain this score. If CMMC is available, Level 2 is required to receive Attachment 2 (CUI Map Layout).
• Requesting Documents: After verification in SPRS, documents are requested via email from Ms. Megan Evans and SSgt Kyra Niece and will be provided via a DoD SAFE Link.
• Acknowledgement: The form requires the vendor to provide their CAGE code, sign, and acknowledge receipt of Attachment 2 – CUI Map Layout.

This document is critical for bidders seeking to receive CUI, including Attachment 2 – CUI Map Layout, which is necessary for understanding the project scope. Bidders must ensure they meet the specified CMMC/NIST SP 800-171 compliance requirements and complete the necessary steps in SPRS to be eligible for CUI release. Failure to comply with these safeguarding and submission requirements may prevent a bidder from receiving essential project information and thus impact their ability to submit a compliant proposal.

Form / Attachment / Pricing Sheet

This document provides the prevailing wage determinations for various construction trades in specific counties within Nebraska and Colorado. It is intended to inform bidders on federal or federally funded construction projects about the minimum wage rates and fringe benefits that must be paid to laborers and mechanics.

• General Decision Numbers: Unique identifiers for each wage determination.
• State and County: Specifies the geographic area covered.
• Construction Type: Primarily "Building" construction projects.
• Trade Classifications: Lists various construction trades (e.g., Electrician, Ironworker, Plumber, Carpenter, Laborer).
• Rates and Fringes: Provides the hourly wage rate and fringe benefit amounts for each classification.
• Effective Dates: Indicates the period for which the wage determination is valid.
• Zone Definitions: For some trades (e.g., Electrician), zones are defined based on distance from a central point.
• Executive Order Notes: Information regarding Paid Sick Leave (EO 13706) and minimum wage requirements (EO 13658) for federal contractors.
• Appeals Process: Outlines the procedure for appealing wage determination decisions.

Bidders must use this information to accurately estimate labor costs for their proposals. Failure to comply with these wage determinations can lead to contract violations. Understanding the specific rates for the required trades and geographic locations is crucial for accurate bidding and project execution.

Form / Attachment / Pricing Sheet

This document is a "Quick Entry Guide" for the Supplier Performance Risk System (SPRS) related to NIST SP 800-171. It provides instructions for vendors on how to access and use the SPRS database to enter and manage their NIST SP 800-171 assessment information.

• NIST SP 800-171 Assessment Database: Explains the purpose of protecting Controlled Unclassified Information (CUI) in nonfederal systems.
• PIEE Access: Details the requirement for a "SPRS Cyber Vendor User" role and provides a link to access instructions.
• SPRS Application Access: Outlines the steps to log in to SPRS via the PIEE landing page and select the NIST 800-171 Assessment.
• Creating a Header: Instructions on creating a Highest Level Owner (HLO) CAGE if one does not exist.
• Header View: Describes the information displayed on the header page, including HLO, Company Name, Total Assessments, and Confidence Level.
• Details View: Explains how to view assessment details associated with the HLO hierarchy.
• Assessments Entry: Step-by-step guide for users to enter new NIST SP 800-171 assessments, including details like Assessment Date, Score, and Scope.
• Assessment Edit: Instructions on how to update existing assessment information.

This guide is crucial for bidders who need to comply with NIST SP 800-171 requirements. It provides the necessary procedural information to navigate the SPRS system, enter their compliance status, and manage their assessment data, which may be a requirement for participating in certain government contracts.

Form / Attachment / Pricing Sheet

This document is Standard Form 24 (Rev. 10/2023), a Bid Bond. It is used when a bid guarantee is required for a solicitation. The bond ensures that the principal (the bidder) will execute further contractual documents and provide required bonds if their bid is accepted, or pay the difference if the government procures the work at a higher cost.

• Principal: Information about the bidder, including name, address, and type of organization.
• Surety(ies): Information about the surety or sureties providing the bond, including name, address, and liability limit.
• Penal Sum of Bond: The amount of the bond, expressed as a percentage of the bid price or a specific dollar amount.
• Bid Identification: Details such as Bid Date and Invitation Number.
• Obligation: Outlines the conditions under which the bond is voided.
• Conditions: Specifies the principal's submission of the bid and the subsequent execution of contractual documents.
• Instructions: Provides guidance on completing the form, including requirements for signatures, seals, and surety information.

Bidders must complete and submit this form if it is required by the solicitation. It is crucial for understanding the financial guarantee required to bid on the opportunity. The form details the obligations of both the principal (bidder) and the surety, and the conditions under which the bond becomes void. Failure to provide a properly executed bid bond may result in disqualification.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet designed as a cost estimate breakdown tool for bidders. It utilizes the Construction Specifications Institute (CSI) format to help contractors build their proposals by detailing costs across various construction divisions.

• The spreadsheet is structured into multiple sheets, each corresponding to a CSI division (e.g., General Requirements, Concrete Work, Electrical).
• It includes sections for labor and material costs, with fields for unit price, quantity, and total cost per item.
• A 'Summary' sheet aggregates costs from individual divisions and includes fields for prime and subcontractor overhead and profit percentages, as well as sales tax and bonding.
• Bidders are instructed to fill in specific "Fill Here" areas, particularly on the Summary sheet for overhead and profit percentages.
• The document provides instructions on how to handle disagreements with pre-filled information and exceptions for self-performance or differing subcontractor rates.

This cost estimate breakdown is crucial for bidders to accurately price their proposals. It provides a standardized format for cost estimation and requires bidders to input their specific cost data, overhead, and profit margins. Bidders must carefully follow the instructions for filling out the spreadsheet, especially regarding exceptions and handling pre-filled data, to ensure their cost proposal is complete and compliant.

Form / Attachment / Pricing Sheet

This document, "NIST SP 800-171 DoD Assessment Methodology, Version 1.2.1," outlines the standardized methodology for assessing a contractor's implementation of NIST SP 800-171. This methodology is used for assessment purposes only and does not introduce new requirements beyond DFARS clause 252.204-7012 and NIST SP 800-171.

• Background: Explains the context of DFARS clauses 252.204-7012 and 252.204-7008, requiring contractors to implement NIST SP 800-171 for safeguarding Controlled Unclassified Information (CUI).
• Purpose: Details the methodology's role in strategic assessment of contractor implementation and its use by DoD and prime contractors for subcontractors.
• Levels of Assessment: Describes three levels: Basic (Contractor Self-Assessment), Medium (DoD personnel assessment), and High (On-Site or Virtual DoD assessment).
• Scoring Methodology: Outlines how assessments are scored, with a base score of 110, reduced for each unmet security requirement. It details point values for different types of requirements.
• Documenting Results: Explains how assessment results are documented and posted in the Supplier Performance Risk System (SPRS).
• Glossary of Terms: Defines key terms such as 'Enduring exception' and 'Temporary deficiency'.
• Annexes: Includes a template for the scoring methodology (Annex A) and a format for contractor self-assessments (Annex B).

This document is crucial for bidders to understand the DoD's requirements and assessment process for safeguarding Controlled Unclassified Information (CUI) as mandated by DFARS. It clarifies the standards against which their cybersecurity practices will be evaluated, including the different assessment levels and the scoring methodology. Understanding this document helps bidders prepare compliant proposals and implement necessary security controls.

Form / Attachment / Pricing Sheet

This document is a Schedule of Material Submittals for Project Number GHLN 26-6277, titled "Replace Site Lighting Electrical Conduits at 5 LFs". It outlines the specific items that require submittal by the contractor, the type of submittal needed, and the required submission dates.

• Project Information: Includes Project Number (GHLN 26-6277) and Project Title.
• Submittal Items: Lists specific items such as EAL Documentation, Dig Permit (AF Form 103), All Permits (Local, State, Federal), Safety Data Sheets, Hazardous Materials, Storage Plan, Project Schedule, As-Built Drawings, PVC Coated conduit, Leviton 1221-21 Switch, and Pad Gravel.
• Type of Submittal: Indicates whether Certification of Compliance, Shop Drawings, Samples, or Catalog Data is required for each item.
• Submission Dates: Specifies deadlines such as "Upon Award," "10 Days After NTP," "15 Days After Award," "Prior to Installation," "30 Days Prior to Close Out," and "Prior to Installation."
• Forms Referenced: Mentions AF Form 103 and AF Form 66.

This schedule is critical for bidders to understand the documentation and material approval process required for the project. It details the specific submittals needed, the format required (e.g., shop drawings, certifications), and the timing of these submissions relative to contract award, notice to proceed (NTP), installation, and project close-out. Bidders must account for these submittal requirements and their associated timelines when developing their proposals and project execution plans.

Solicitation / RFP / RFQ

This solicitation requests proposals for the "Replace Site Lighting Electrical Conduits at 5 LFs" project (Project Number: GHLN26-6277). The work involves providing all contract materials and workmanship in accordance with existing contract standards, codes, practices, and specifications.

• Proposal must include all contract materials and workmanship.

• Refer to Attachment 1 Statement of Work (SOW) dated 18 December 2025 for detailed requirements.

• Submittal of AF Form 66 (Attachment 2) is required.

• Attachment 3 CUI Map Layout requires submission of MFR CUI Control and Receipt, affirming NIST SP 800-171 Assessment completion or equivalent Level 2 CMMC Assessment. A plan of improvement is needed if NIST SP 800-171 score is below 110.

• Davis Bacon Act Wage Determination classification is "BUILDING" (Attachment 4).

• A bid guarantee is required (FAR 52.228-1), with the amount being 20 percent of the bid price or $N/A, whichever is less. Attachment 5 SF 24 Bid Bond Form is provided.

• Performance bonds are required for delivery/task orders of $150,000.00 and above.

• Payment protection is required for delivery/task orders greater than $35,000.00 but not greater than $150,000.00.

• The Period of Performance (PoP) is 120 calendar days. Proposals exceeding this will be considered technically unacceptable.

• Estimated magnitude for this requirement is between $100,000 and $250,000.

• Site visit requests are due by 11:00 am MT on Thursday, 12 March 2026.

• Questions are due by 11:00 am MT, the day after the site visit, or by 11:00 am MT on Tuesday, 17 March 2026, if no site visit is requested.

• Proposals are due no later than 11:00 am MT on Thursday, 26 March 2026.

• Offers shall have an acceptance period of 60 calendar days.

• Evaluation Factors:

  • Factor 1 – Price: Equally important as technical acceptability. The Government will rank offerors by price and then evaluate the lowest priced offer for technical capability.
  • Factor 2 - Technical: Equally important as price. The lowest priced offer will be evaluated for technical acceptability. If acceptable, award will be made. If not, the next lowest priced offer will be evaluated.

• Subfactor 1 – Work Plan: Demonstrates ability to complete the project within the SOW and PoP.

• Subfactor 2 - Bid Guarantee/Bonding: Contractor shall provide a bid guarantee at time of proposal submission.

• Not explicitly stated in the provided text.

• Attachments include: SOW, AF 66 Submittal Register, CUI Map Layout, Combined Wage Determinations, SF 24 Bid Bond Form, and Cost Estimate Breakdown.

Statement of Work (SOW) / Performance Work Statement (PWS)

This project involves replacing site lighting electrical conduits at five (5) Launch Facilities (LFs) under the control of F.E. Warren Air Force Base, Wyoming.

• Remove wire from existing failed conduit at all five sites, and between the LSB and gate switch at sites H-09 and I-04.

• Abandon existing conduit in place by capping each end a minimum of 12" below grade.

• Install new 1 1/2" PVC coated rigid conduit from the LSB to the power pole at all five sites, and from the LSB to the gate switch at H-09 and I-04. Conduit installation depth is a minimum of 36 inches.

• Separate and reuse top 6" of pad and access road gravel for backfill, or provide equivalent gravel.

• Excavate carefully to avoid damaging adjacent utilities.

• Pull new wire through new conduit and connect circuits.

• Backfill conduit trench in maximum 6" loose lifts, compacting to ensure no settlement.

• Place electrical warning tape 18" above conduit during backfilling.

• Replace gate switches with Leviton 1221-21 Single-Pole 20A 277Volt Ivory Ac Switch.

• Period of Performance (PoP): 120 calendar days.

• Work will be performed at MAFs/LFs located in Colorado and Nebraska.

• Contractor must provide all labor, materials, equipment, and transportation.

• Contractor must comply with specifications, applicable drawings, attachments, and industry standards.

• Contractor must provide submittals of manufactured items for approval prior to ordering.

• Contractor must provide weekly project updates and hold project meetings as needed.

• Security requirements include base access procedures, Real ID compliance, and potential for physical and electronic searches.

• Contractor personnel must complete Level I antiterrorism awareness training.

• Controlled Unclassified Information (CUI) handling procedures must be followed.

• Environmental compliance with State/Federal regulations is required.

• Hazardous materials (HAZMAT) must be coordinated with 90 CES Environmental.

• Contractor is responsible for all safety on the project, including traffic control, trenching, and equipment operation.

• Site conditions require daily cleanup and restoration of work areas to their original condition or better.

• Any damage to Air Force property must be repaired at the Contractor's expense.

• RFIs must be submitted to the CO for any questions or proposed changes.

• Modifications to the contract will be issued by the CO.

• Red-lined drawings must be submitted prior to project close out.

• Written warranties for equipment and installation are required.