Request for Information (RFI) for a Family of Affordable Mass Missiles – Beyond Adversary’s Reach (FAMM-BAR)

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the FAMM-BAR RFI and Industry Day.

• Solution Scope: The RFI and Industry Day are focused on complete system solutions, though sub-system information is accepted. Responses do not need to be in a formal White Paper format.
• Technical Data Package (TDP): DAS 2.1 or 3.0 TDPs will not be provided. However, the DAS 2.1 ICD and top-level drawing, and the DAS 3.0 Pallet Control Module (PCM) ICD are available upon request.
• Multiple Solutions: If a vendor has more than one solution, they should submit one white paper if both solutions fit within the 10-page limit.
• Industry Day Invitation: Submission of a white paper is required to be eligible for an Industry Day invitation. Not all white paper submitters will qualify; only those whose solutions meet the requirement will be invited.
• Industry Day Details: More detailed information about Industry Day, including attendee limits (2-3 personnel with a technical SME), will be provided in formal invitations after eligible RFI responses are received.
• 'Unitary vs. Non-Unitary': 'Unitary lugged/palletized' is interpreted as a single, integrated weapon system with dual-launch capabilities, mechanizable off a traditional rail/pylon system or deployable via a palletized system.
• Technical Approach Clarification: The Threshold baseline for the Risk Reduction effort is focused exclusively on the palletized-only configuration. The Objective end-state aims for the full 'unitary lugged/palletized' capability, enabling operation from both pallet and rail interfaces.

This Q&A document clarifies requirements and participation criteria for the RFI and Industry Day. It does not appear to alter any deadlines or submission rules mentioned in the original RFI.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the FAMM-BAR RFI, clarifying requirements and submission details.

• Solution Scope: Responses are sought for complete system solutions, but information on sub-system levels is also accepted. Information provided does not need to be in a formal White Paper format.
• Technical Data Package (TDP): The DAS 2.1 or 3.0 TDP will not be provided. However, the DAS 2.1 ICD and top-level drawing, and the DAS 3.0 Pallet Control Module (PCM) ICD are available upon request.
• Multiple Solutions: If multiple solutions fit within the 10-page RFI limit, submit a single white paper.
• DAS 2.1 Specifications: Specifications for the pallet (length, width, height, weight, target COB), rack dimensions, power, and interfaces will be provided upon request.
• Industry Day Invitation: Submission of a white paper is required to be eligible for an Industry Day invitation. Not all submissions will qualify; only those meeting the requirement will be invited.
• Industry Day Attendees: Attendees will be limited to 2-3 personnel per organization, with a request for a technical SME. More details will be provided in formal invitations.

This Q&A document clarifies the scope of responses, availability of technical data, submission guidelines for multiple solutions, and eligibility for Industry Day. It does not appear to alter any original solicitation deadlines or evaluation criteria.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the FAMM-BAR RFI, clarifying the scope and submission requirements.

• Scope of Response: The RFI seeks complete system solutions, but information on sub-system levels is accepted and will be discussed separately. Formal White Paper format is not required for this additional information.
• Technical Data Package (TDP): The DAS 2.1 or 3.0 TDPs will not be provided. However, the DAS 2.1 ICD and top-level drawing, and the DAS 3.0 Pallet Control Module (PCM) ICD are available upon request.
• Multiple Solutions: If a vendor has multiple solutions that fit within the 10-page RFI limit, a single white paper should be submitted.
• DAS 2.1 Specifications: Specific pallet specifications (length, width, height, weight, target COB), rack dimensions, power, and interface locations for the DAS 2.1 will be provided upon request.
• Industry Day Invitation: Submission of a white paper is required to be eligible for an invitation to Industry Day. Not all white paper submissions will qualify; only those whose solutions meet the requirement will be invited.

Clarifies the scope of acceptable responses, availability of technical data, submission guidelines for multiple solutions, and the process for Industry Day invitations. Bidders should note that TDPs are not automatically provided and specific pallet details are available upon request.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the FAMM-BAR RFI, clarifying the scope and submission requirements.

• Scope of Interest: The RFI seeks responses for complete system solutions. While sub-system level information is accepted, it is secondary to complete system solutions and would be discussed separately. Formal White Papers are not required for this information.
• Technical Data Package (TDP): The DAS 2.1 or 3.0 TDP will not be provided. However, the DAS 2.1 ICD and top-level drawing, and the DAS 3.0 Pallet Control Module (PCM) ICD are available upon request.
• White Paper Submission: If a vendor has multiple solutions, they should submit a single white paper if both solutions can fit within the 10-page limit.
• DAS 2.1 Specifications: The available specifications for the pallet (length, width, height, weight, target COB), rack dimensions, power, and interfaces/locations are available upon request, along with the DAS 2.1 ICD and top-level drawing.

This Q&A clarifies the scope of interest and the availability of technical documentation, which may influence how vendors prepare their responses to the RFI.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the FAMM-BAR RFI and Industry Day.

• Solution Scope: While the RFI and Industry Day focus on complete system solutions, information regarding modular capabilities or sub-system levels is accepted and may be discussed separately. Submitted information does not require a formal White Paper format.
• Technical Data Package (TDP): The Government will not provide the DAS 2.1 or 3.0 TDPs in support of this RFI.

This Q&A document clarifies the scope of information sought and the availability of specific technical data, which may influence how vendors prepare their responses or understand the government's needs.

Request for Information (RFI)

This RFI seeks market research to identify potential sources capable of designing, developing, and manufacturing an adaptable and affordable Family of Affordable Mass Missiles (FAMM-BAR). The goal is to gather information on industry's ability to perform these tasks affordably and expeditiously for the U.S. Air Force and Foreign Military Sales.

• Objective: Develop a single, common, air-to-surface munition that is affordable, adaptable, and has significant standoff range.

• Deployment Methods: Primary via Palletized (cargo aircraft); secondary via Lugged (fighter/additional aircraft).

• Service Adaptability: Information requested on delivery from air-to-surface and surface-to-surface for Army and Navy systems (for information gathering only).

• Performance Attributes:

  • Range: ≥ 1000 NM
  • Speed: ≥ .7 M
  • Target Set: Slow moving maritime
  • Mid-course navigation: Yes
  • Manufacturing Rate Per Vendor: ≥ 1,000 AUR per year

• The potential procurement objective is to produce an inventory for 5 years, with annual production orders ranging from 1000-2000 units per year.

• Responses should consider meeting criteria for an Other Transaction Authority Agreement (10 U.S.C. § 4022).

• Response Format: White paper, Microsoft Word compatible, 10 pages or less (including cover and administrative pages), 1-inch margins, 12-point font.

• Company Profile Required: Company Name, Address, POC, Email, Website, Phone, Business Category (NAICS 332993), DUNS/CAGE Code.

• Submission Method: Email only to AFLCMC.EBIW.Contracting@us.af.mil.

• Deadline: 29 April 2026, 1700 hrs.

• Subject Line: "RFI Response: FAMM-BAR"

• Security: Anticipated security level is UNCLASSIFIED.

• Not specified in this RFI.

• This RFI is for informational and planning purposes only and does not constitute a solicitation or commitment to contract.

• Respondents are responsible for all associated costs.

• Proprietary information must be clearly marked.

• Questions should be emailed to the same address as submissions.