STUD, CONTINUOUS THREADED (BOLT-STUD), 4340 STEEL, PHOSPHATE COATED 0.625"-11UNC-3A X 18.000" BOA Item 7018AC

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for non-commercial products, specifically "STUD, CONTINUOUS THREADED (BOLT-STUD), 4340 STEEL, PHOSPHATE COATED 0.625"-11UNC-3A X 18.000"". The procurement is being conducted under Simplified Acquisition Procedures and is set aside for Small Business. The solicitation is issued as a Request for Quotation (RFQ).

• Procurement of 400 Linear Inches of "STUD, CONTINUOUS THREADED (BOLT-STUD), 4340 STEEL, PHOSPHATE COATED" with NSN: 1H 5307-01-338-4281 X2.

• Manufacturing and data requirements must be in full accordance with the specifications and Data requirements for BOA Item 7018AC, as listed in the Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program manual (dated September 2021).

• Applicable Non-Destructive Testing and/or Coating procedures may be required.

• Evidence of compliance with Higher-Level Contracting Quality Requirements (MIL-I-45208 or ISO 9001/9002 with STR-ISO 9000 Supplement A, B, or C) is required.

• Required Delivery Date: 3 September 2026.

• Place of Performance: Portsmouth Naval Shipyard, Kittery, ME, 03904.

• The solicitation is being issued as a(n) Request For Quotation (RFQ).

• Quotes must be emailed to lauren.w.leduc.civ@us.navy.mil by 17 February 2025, 10:00 AM ET.

• Award will be made on an "All or None" basis.

• Evaluation will be based on Lowest Price Technically Acceptable (LPTA), considering: Technical Capability, Price, and Past Performance.

• Technical Capability requires the offeror to possess the 2021 Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program Manual and meet specific quality requirements.

• Past performance will be evaluated based on recent (within 5 years) and relevant contracts.

• This acquisition is for Small Business Set-Aside.

• NAICS Code: 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing).

• Size Standard: 600 employees.

• Vendors must be registered in the System for Award Management (SAM).

• Paper copies of the solicitation will not be issued.

• Vendors must request copies of the Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program Manual from the POCs listed.

• Vendors must submit a quote that includes page 2 of the combined synopsis, with highlighted fields completed.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for non-commercial products, specifically continuous threaded studs (bolt-studs) made of 4340 steel, phosphate coated, with a nominal size of 0.625"-11UNC-3A x 18.000". The acquisition is being conducted under Simplified Acquisition Procedures and is set aside for Small Business. The North American Industry Classification System (NAICS) code is 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) with a size standard of 600 employees.

• Item 0001: 400 linear inches of STUD, CONTINUOUS THREADED (BOLT-STUD), 4340 STEEL, PHOSPHATE COATED, in accordance with specifications in the Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program manual.

• Item 0002: Contract Data Requirements List for Item 0001, in full accordance with the Contract Data Requirements List for BOA Item 7018AC, as listed in the aforementioned manual.

• Technical Requirements: Vendors must possess the 2021 Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program Manual and meet specific quality requirements (MIL-I-45208 or ISO 9001/9002 with STR-ISO 9000 Supplement A, B, or C), and provide evidence of applicable Non-Destructive Testing and/or Coating procedures if required.

• Required Delivery Date: 3 September 2026

• Place of Performance: Portsmouth Naval Shipyard, Kittery, ME, 03904

• Contract Type: Not explicitly stated, but implied to be a delivery order resulting from this RFQ.

• Response Deadline: 02/09/2026 10:00 AM ET

• Submission Method: Offers shall be emailed to the Contract Specialist at lauren.w.leduc.civ@us.navy.mil.

• Evaluation Criteria: Quotes will be evaluated based on Lowest Price Technically Acceptable (LPTA), considering Technical Capability, Price, and Past Performance.

• Technical Capability: Must be able to meet technical requirements from the specified Fastener Program Manual. Confidence ratings (Acceptable, Unacceptable) will be assigned.

• Past Performance: Will be evaluated based on recent (within 5 years) and relevant contract/project history.

• This acquisition is a Small Business Set-Aside.

• Vendors must be registered in the System for Award Management (SAM).

• Paper copies of the solicitation will not be issued.

• Vendors must request copies of the Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program Manual from the POCs listed.

• An active DD2345 form is required.

Solicitation / RFP / RFQ

This is a pre-solicitation notice for non-commercial products, prepared in accordance with FAR Subpart 13.105. A written solicitation will be posted on sam.gov. The associated Request for Quotation (RFQ) number is N3904026Q5227. The solicitation will incorporate provisions and clauses in effect through FAC 2025-06 and DFARS Change 2025-1110.

• Item 0001: STUD, CONTINUOUS THREADED (BOLT-STUD), 4340 STEEL, PHOSPHATE COATED, 400 Linear Inches. Specifications are listed in the Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program manual. BOA Item: 7018AC, NSN: 1H 5307-01-338-4281 X2.

• Item 0002: Nominal Size: 0.625"-11UNC-3A X 18.000", 1 Set. Contract Data Requirements List for Item 0001 is in full accordance with the Contract Data Requirements List for BOA Item 7018AC listed in the Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program manual.

• All manufacturing and data requirements are in full accordance with the specifications and Data requirements for BOA Item 7018AC listed in the Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program manual.

• Delivery Point: Portsmouth Naval Shipyard, Kittery, ME.

• There will be no Government-Furnished Material.

• Vendors must possess a 2021 Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program Manual and either:

  1. Hold a Basic Ordering Agreement satisfying applicable procedure requirements and Higher Level Contracting Quality Requirements (MIL-I-45208 or ISO 9001/9002 with STR-ISO 9000 Supplement A, B, or C).
  2. Provide applicable Non-Destructive Testing and/or Coating procedures (if required by technical data) and evidence of compliance with Higher Level Contracting Quality Requirements (MIL-I-45208 or ISO 9001/9002 with STR-ISO 9000 Supplement A, B, or C).

• If unable to meet bidding requirements or receive an award, submit written confirmation to the Contracting Officer stating the manual has been returned or destroyed as per DD2345 form instructions within 45 days following solicitation closure.

• NAICS code: 332722. Small Business Standard: 600 employees.

• This will be a 100% Small Business Set-Aside solicitation.

• Requests for copies of the Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program Manual can be made to Lauren LeDuc (lauren.w.leduc.civ@us.navy.mil) and Victoria MacLellan (victoria.b.maclellan.civ@us.navy.mil). Include an active DD2345 form with the request.

• Contact Buyer: lauren.w.leduc.civ@us.navy.mil

• This announcement will be publicized for 15 days, from 8 Jan 2026 to 27 Jan 2026.

Solicitation / RFP / RFQ

This document provides instructions for submitting a quote for a delivery order under an existing contract, likely for fasteners, as indicated by references to fastener program manuals and technical requirements. The government will award a delivery order to the responsible vendor whose quote offers the best value to the government.

• Vendors must possess a 2021 Portsmouth Naval Shipyard C. R. Gilbert / E. F. Dickson Fastener Program Manual.

• Vendors must meet specific technical requirements related to manufacturing fasteners, referencing the aforementioned manual and dated September 2021.

• Technical Confidence Submission requires either:

  • Holding a Basic Ordering Agreement (BOA) that satisfies applicable procedure requirements and Higher Level Contracting Quality Requirements (MIL-I-45208 or ISO 9001/9002 with STR-ISO 9000 Supplement A, B, or C).
  • OR Providing applicable Non-Destructive Testing and/or Coating procedures (if required) and evidence of compliance with Higher Level Contracting Quality Requirements (MIL-I-45208 or ISO 9001/9002 with STR-ISO 9000 Supplement A, B, or C).

• Vendors must provide their lowest pricing terms for the requested items.

• The award will be a delivery order resulting from this solicitation.

• Offers shall be emailed to Lauren LeDuc at lauren.w.leduc.civ@us.navy.mil.

• Quotes will be evaluated based on the Lowest Price Technically Acceptable (LPTA) method.

• Evaluation factors are: 1. Technical Capability, 2. Price, 3. Past Performance.

• Technical Capability requires the ability to meet manufacturing requirements from the specified Fastener Program Manual.

• Past Performance will be evaluated based on recent (within 5 years) and relevant contracts/projects.

• Failure to include pricing for all line items will be cause for rejection.

• Vendors must be registered in the System for Award Management (SAM) database.

• The Portsmouth Naval Shipyard is the sole authorized distributor of the program manual; vendors cannot quote without possessing it or a BOA Book.