Y1DZ--B3-Fourth Floor PACT Renovation Project # 659-26-800

Solicitation / RFP / RFQ

This solicitation is for a Design-Build project to renovate the fourth floor of Building 3 at the Salisbury VAMC, creating a primary care unit to improve spatial implementation for PACT, patient flow, staff communication, and patient visit efficiency. The project also aims to improve restrooms for accessibility and enhance the overall appearance of the space.

• Scope of Work: Includes general construction, alterations, and necessary removal of existing building elements. Specific sections of the floor plan will undergo varying levels of demolition, reframing, painting, new ceiling grids, new ceiling tiles, and new flooring (LVT or carpet).

• HVAC System: Existing Fan Coil units will be removed and replaced with a ducted forced-air system. Existing Air Handling Units will be demolished and replaced.

• Asbestos Abatement: Required for existing VCT flooring mastic and hydronic piping insulation.

• Trades: Demolition/Asbestos abatement, plumbing, HVAC, electrical, low-voltage, fire protection, life safety, painting, carpentry, mill work, flooring, data, and physical security.

• Attachments: Includes a colored floor plan (Attachment 1) and a conceptual layout (Attachment 2).

• Contract Type: Firm-Fixed-Price Design-Build.

• Period of Performance: 360 Calendar Days from the Notice to Proceed.

• Estimated Value: Between $5,000,000 and $10,000,000.

• Set-Aside: 100% set-aside for Service-Disabled Veteran-Owned Small Business (SDVOSB). Offerors must be registered and certified in the SBA database.

• Two-Phase Design-Build Acquisition:

  • Phase I: Focuses on Corporate Experience, Technical Approach, Past Performance, and Construction Management. A maximum of four offerors will proceed to Phase II.
  • Phase II: Requires a Technical Solution, Schedule, and Price proposal.

• Evaluation: Best Value Tradeoff source selection. Factors other than price are significantly more important than price alone.

• Key Deadlines:

  • Phase I Questions Cut-off: April 13, 2026, 10:00 AM EST.
  • Phase I Proposal Submission: June 23, 2026.
  • Contract Award: September 8, 2026.
  • Notice to Proceed: September 23, 2026.
  • Construction Completion: September 18, 2027.

• Submission Method: Electronically via email to Sean.Cosby@va.gov. NO FAXED PROPOSALS.

• SDVOSB Set-Aside: This procurement is exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) certified and registered in the SBA database.

• A Bid Guarantee will be required for Phase II.

• FAR 52.225-2 Buy American Act Certificate and VAAR 852.219-75 Limitations on Subcontracting Certificate must be completed and submitted in Phase II.

• Wage Determination No. NC20260017 applies.

Form / Attachment / Pricing Sheet

This document is a drawing titled "BLDG. 3, 4TH FLOOR HVAC PLAN, PART B, NEW". It provides detailed plans and specifications for the HVAC system in Building 3, specifically on the fourth floor, detailing new installations.

• HVAC system layout for the fourth floor, including ductwork and piping.
• Details for various components such as pipe sleeves, floor penetrations, smoke dampers, chill water coils, and steam heating coils.
• Specific notes regarding insulation requirements for different types of pipes and ducts (e.g., chill water, steam, flex duct).
• Information on fire and smoke partition penetrations.
• A key map and revision history.

This drawing is crucial for bidders to understand the scope of work related to the HVAC system for the specified building and floor. It outlines the specific components, materials, and installation requirements, which will inform proposal preparation, cost estimation, and execution planning.

Form / Attachment / Pricing Sheet

This document appears to be a detailed "Column Schedule" which likely serves as a critical attachment or form for a construction or engineering-related solicitation. It provides specific data related to structural columns, which bidders would need to reference for pricing, material estimation, and technical compliance.

• Column Identification: Each row likely represents a specific structural column, identified by a unique number or code.
• Dimensions and Properties: The schedule details dimensions (e.g., width, depth, length), material specifications, and potentially load-bearing capacities or other structural properties for each column.
• Quantity and Unit Information: It may specify quantities required and units of measure for materials or labor associated with each column.
• Notes and References: There are likely columns for notes, references to drawings, or specific construction details.

This "Column Schedule" is essential for bidders to accurately:

• Estimate Material Costs: Understand the exact quantities and types of materials needed for structural columns.
• Develop Pricing: Incorporate the cost of fabricating, delivering, and installing these columns into their proposals.
• Assess Technical Requirements: Ensure their proposed solutions meet the specified structural and material requirements.
• Identify Potential Challenges: Recognize any complex or unique column designs that might impact construction methods or timelines.

Form / Attachment / Pricing Sheet

This document appears to be a detailed schedule or breakdown, likely related to a project or contract. It contains numerous columns and rows with alphanumeric codes, quantities, units, and cost-related information. The bottom left corner includes a title block with "FILE FOLDER NO. 2A" and "BEAMS SCHEDULE" indicating its organizational context.

• Itemization: Lists various items or tasks with associated codes.
• Quantities & Units: Specifies amounts and units of measure.
• Cost Data: Includes columns for rates, costs, and potentially extended values.
• Dates: Some entries appear to have date references.
• Location/Area: References to specific areas or locations are present.
• Notes/Remarks: A column for additional details or comments.

This schedule is crucial for bidders to understand the detailed breakdown of costs, quantities, and potentially the scope of work for the opportunity. It will likely be used for pricing proposals, estimating resource needs, and ensuring compliance with the specified requirements. Bidders should carefully review this document to accurately price their offers and confirm their understanding of the project's components.

Form / Attachment / Pricing Sheet

This document contains riser diagrams for the water systems within Building 3 of the Veterans Administration Hospital in Salisbury, North Carolina. It details the plumbing layouts for hot water, cold water, and chilled drinking water across multiple floors.

• Riser Diagrams: Illustrates the vertical piping for various water systems (hot water, cold water, hot water return, chilled water, drains) across different floors (Ground, 1st, 2nd, 3rd, 4th, Penthouse).
• Component Callouts: Identifies specific fixtures, valves (mixing valves, globe valves, drain valves), pumps, heaters, and other equipment with associated pipe sizes, flow rates (GPM), and pressures (PSI).
• Floor Identification: Clearly labels each floor and indicates where systems are identical or differ between levels.
• Key Maps: Provides a visual index for the diagrams.
• Architectural and Engineering Information: Includes project numbers, drawing numbers, dates, and the firms involved in the design (Walter Hook & Associates, Inc., Wm. Henley Deitrick, Inc., Wm. C. Olsen).

This document is crucial for bidders to understand the existing plumbing infrastructure and specifications for any work related to the water systems within Building 3. It provides detailed technical information necessary for assessing the scope of work, planning installations, and ensuring compliance with the original design intent for any renovation, repair, or new construction related to these systems.

Form / Attachment / Pricing Sheet

This document is a "Third Floor Plumbing Plan" for "Building 3, Veterans Administration Hospital". It appears to be an "as built" drawing, dated July 22, 1955, with a revision noted on July 6, 1955. It details the plumbing layout for the third floor of the Admission Building.

• Floor plan layout showing rooms, walls, and fixtures.
• Plumbing lines indicated with various symbols and labels (e.g., CW, HW, DW, V, FD, C.O., C.W. UP).
• Room labels and numbers (e.g., "SIXTEEN BED ROOM", "OFFICE", "KITCHEN AP", "SECLUSION").
• Annotations indicating pipe sizes, connections, and offsets.
• A title block with project information, including project number (2448), drawing number (249/471), and agency details (Corps of Engineers, U.S. Army, Charleston District).

This plan provides critical spatial and technical information regarding the existing plumbing infrastructure on the third floor of Building 3. Bidders involved in any renovation, repair, or new installation work on this floor would need to consult this plan to understand the current plumbing system, identify potential conflicts, and accurately scope their work. It is essential for estimating costs and developing technical proposals.

Form / Attachment / Pricing Sheet

This document is a "Fourth Floor Plumbing Plan" for Building 3, identified as "B3-P5.pdf". It appears to be an "As Built" drawing, indicating the final installed plumbing configuration.

• Detailed layout of plumbing systems on the fourth floor.
• Includes symbols and labels for various plumbing fixtures, pipes, vents, and valves.
• Shows room designations and numbers.
• Includes a title block with project information, drawing title, scale, and revision history.

This plan provides critical visual information about the existing plumbing infrastructure on the fourth floor of Building 3. Bidders involved in any work related to this floor, particularly plumbing, HVAC, or renovations, would need to consult this plan to understand the current system, identify potential conflicts, and accurately scope their work. It is essential for planning and execution of any related construction or maintenance activities.

Form / Attachment / Pricing Sheet

This document contains technical drawings and diagrams related to steam riser systems and their connections within a building. It appears to be a set of schematics for a construction or renovation project.

• Steam Riser Diagrams (A-R): Illustrates the layout and connections of steam risers, including valves, strainers, and drip points.
• Typical End of L.P. Main Drip or Drip & Rise: Details the configuration for draining low-pressure steam mains.
• Typical Drip for Medium & High Pressure Steam Mains: Shows the setup for draining medium and high-pressure steam mains.
• Typical Connections to Convectors: Depicts how steam convectors are connected, including access panels and valve types.
• Runout Sizing Chart: Provides guidance on sizing steam runouts based on the Equivalent Direct Radiation (E.D.R.) and specifies valve sizes.
• Title Block: Includes project information such as "VETERANS ADMINISTRATION HOSPITAL SALISBURY N.C. 960 BED NF HOSPITAL ADMISSION BUILDING (REGULAR)", project number "VA 44-32-14-H7", and drawing title "STEAM RISER DIAGRAMS".

This document is crucial for bidders involved in mechanical systems, HVAC, or plumbing for the specified Veterans Administration hospital project. It provides the detailed technical specifications and layouts required for the installation, modification, or maintenance of the steam heating system. Bidders must review these diagrams to understand the scope of work, material requirements, and installation standards for the steam distribution network.

Form / Attachment / Pricing Sheet

This document provides detailed mechanical schedules, notes, and a legend for the "Replace AHU #16" project at the VA Medical Center, Building 3, Salisbury, N.C. It serves as a technical reference for contractors involved in the project.

• Legend: Defines symbols and abbreviations used in mechanical drawings, including existing and new piping, ductwork, dampers, and control devices.
• General Notes: Outlines contractor responsibilities, coordination requirements, demolition procedures, site safety, noise control, and material specifications (e.g., ductwork fabrication, insulation).
• Pump Schedule: Details specifications for secondary chilled water system pumps (P5, P6), including GPM, Head, HP, motor details, and VFD requirements.
• Steam Humidifier Schedule: Specifies requirements for the steam humidifier (SH1) for AHU-16, including steam pressure, control valve details, and performance metrics.
• Air Handling Unit (AHU) Schedule: Provides detailed specifications for AHU-16, including airflow, static pressure, coil capacities (chilled water and steam), motor size, and unit construction.
• AHU-16 Dimensions: Illustrates the physical dimensions of AHU-16.
• Key Plan & Roof Plan: Shows the location of the AHU replacement within the building.

This document is crucial for bidders to understand the technical specifications, scope of work, and specific requirements for the HVAC system replacement. It details the equipment to be installed, materials to be used, and the standards to be followed, directly impacting proposal preparation and project execution.

Form / Attachment / Pricing Sheet

This document is a set of architectural drawings detailing the fourth-floor plan and penthouse plans for Air Conditioning systems in Building No. 3 at the Veterans Administration Hospital in Salisbury, North Carolina. It outlines the layout of ductwork, air handling units, and related components.

• Fourth Floor Plan: Shows the distribution of air conditioning ductwork, including supply and return air lines, across various rooms such as bedrooms, day rooms, nurse's stations, and utility closets. It indicates airflow (CFM) and pipe sizes.
• Penthouse Plans (No. 1 & No. 2): Detail air conditioning equipment located on the penthouse level, including reheat coil piping and air handling units.
• Details: Includes specific details for ductwork chases and reheat coil piping.
• Key Plan: Provides a general overview of the building layout.
• Legend: Symbols indicate various components like air handling units, ductwork, and piping.

This drawing is crucial for bidders to understand the existing or proposed air conditioning infrastructure. It provides detailed information on the scope and complexity of the HVAC system, which is essential for estimating costs, planning installation, and ensuring compliance with the project's technical requirements.

Form / Attachment / Pricing Sheet

This document is a drawing (Sheet 3-H4R) detailing the third-floor plan for Air Conditioning systems in Building No. 3 at the Veterans Administration Hospital in Salisbury, North Carolina. It illustrates ductwork, reheat coil piping, and air devices.

• Floor plan layout with room numbers and designations.
• Ductwork sizing and routing indicated by various dimensions (e.g., 14"x8", 42"x18").
• Reheat coil piping (HWRHC) and hot water heating (HWH) lines are shown.
• Details for duct chase and reheat coil piping are provided.
• Symbols indicate existing and new air devices, condensate drains, and other components.

This drawing is crucial for understanding the physical layout and specifications of the air conditioning and heating systems on the third floor. Bidders will need to reference this plan to assess the scope of work, identify existing infrastructure, and plan for any modifications or installations required for the opportunity. It provides critical spatial and technical information for proposal development.

Form / Attachment / Pricing Sheet

This document is a drawing titled "BLDG. 3, 4TH FLOOR HVAC PLAN, PART A, NEW". It provides detailed plans for the Heating, Ventilation, and Air Conditioning (HVAC) systems for the fourth floor of Building 3, specifically for Part A of the new construction or modifications.

• HVAC system layout including ductwork, piping (steam, chilled water, condensate), and reheat coils.
• Locations of air handling units (AHUs), diffusers, grilles, and valves.
• Details on insulation requirements for various pipe types and ductwork.
• Notes regarding pipe sleeving, penetrations of fire/smoke walls, and insulation specifications.
• Elevation views for specific components like convectors and AHUs.
• A key map indicating Part A and Part B of the building.

This drawing is crucial for bidders to understand the physical layout and specifications of the HVAC systems that are part of the opportunity. It details the scope of work related to HVAC installations, modifications, or maintenance, including specific component locations, material requirements (insulation types), and adherence to standards for wall penetrations. Bidders will need to use this plan to estimate costs, plan installation procedures, and ensure compliance with the specified design.

Form / Attachment / Pricing Sheet

This document is a "Fourth Floor Framing Plan" drawing, likely an attachment to a solicitation or SOW. It provides detailed structural framing information for the fourth floor of a building.

• Depicts joist layouts, beam locations, column grids, and dimensions.
• Includes notes on concrete type, standard structural details, and conduit sizes.
• References other drawing numbers for specific details (e.g., lintel schedule, standard details).
• Lists design live loads for different areas (roofs, corridors, offices, storage).

Bidders involved in construction or structural work related to this opportunity would use this plan to understand the structural requirements, material specifications, and layout of the fourth floor. It is crucial for estimating costs, planning construction activities, and ensuring compliance with structural design standards.

Form / Attachment / Pricing Sheet

This document is a "THIRD FLOOR FRAMING PLAN" which details the structural framing for the third floor of a building. It serves as a technical drawing for construction purposes.

• The plan displays structural elements such as joists, beams, and columns, indicated by various line types and labels (e.g., L-300, B-301, S-4).
• Dimensions and spacing for these structural components are provided.
• Notes section includes information on concrete type, references to standard structural details, and conduit size limitations.
• It also lists live loads for different areas (roofs, corridors, storage).

This drawing is crucial for bidders involved in the construction or renovation of the third floor. It provides specific details on the structural framework that must be adhered to, influencing material selection, labor requirements, and overall construction methodology. Bidders should review this plan to understand the structural scope and any associated constraints or requirements.

Forms / Attachments / Pricing Sheets

This document provides a mechanical legend, abbreviations, and Air Handling Unit (AHU) schedules. It serves as a reference for understanding symbols, terminology, and specifications related to HVAC equipment for potential bidders.

• Mechanical Legend: Defines symbols used for piping, ductwork, and miscellaneous components.
• Piping Designations & Abbreviations: Lists common terms and their meanings (e.g., CHWS for Chilled Water Supply, AHU for Air Handling Unit).
• Air Handling Unit (AHU) Schedule: Details specifications for multiple AHUs (AHU-12, AHU-17, AHU-18, AHU-19), including location, airflow (CFM), filter data, preheat/cooling coil data, supply air fan data, and water side data. It also includes notes on fan velocity, filter types, construction, and damper requirements.
• Steam Humidifier Data: Provides capacity and operating conditions for steam humidifiers associated with the AHUs.

This document is crucial for bidders to understand the technical requirements and specifications for the HVAC systems, particularly the Air Handling Units. It informs the scope of work, material selection, and installation details required for the opportunity.

Form / Attachment / Pricing Sheet

This document contains architectural drawings, specifically floor plans for the fourth floor, including "General Plan Notes," "Bulkhead Section," "Door Signage," and "Divider" details. It serves as a visual guide for construction or renovation work.

• General Plan Notes: Provides detailed instructions and specifications for construction, including dimensions, materials, wall types, fire ratings, and finishing requirements.
• Floor Plans: Illustrates the layout of rooms, hallways, and structural elements on the fourth floor, with room numbers and designations.
• Sections and Details: Includes specific details for bulkheads, door signage, and dividers, with scale references.
• Revisions: Notes changes made to the drawings on specific dates.

This document is crucial for bidders to understand the physical scope of work, material specifications, and layout requirements for any construction or renovation opportunity related to this floor plan. It directly informs material take-offs, labor estimates, and compliance with building standards.

Form / Attachment / Pricing Sheet

This document contains architectural drawings, specifically floor plans, sections, and wall sections, related to a construction or renovation project. It provides detailed visual information for the "Fourth Floor New Plan" and associated elements.

• Floor Plans: Depicts the layout of the fourth floor, including room designations (e.g., 4113, 4114, 4115), walls, and fixtures.
• Plan Sections (A5-02, A5-03, A5-04): Illustrates cross-sections of specific areas, detailing construction elements like "NEW METAL STUD / GYPSUM BOARD WALL" and "LAYERS SAP FL."
• Ceiling Section (A5-05): Shows details of ceiling construction.
• Wall Sections (A5-06, A5-07): Provides detailed views of wall construction, including materials and assembly.
• Key Plan (A5-01): A general overview plan.
• Revisions: Includes a section for tracking changes to the drawings.
• Title Block: Contains project title, drawing title, location, dates, project number, and drawing number (A-5, DWG. 06 DF 35).

This drawing is crucial for bidders to understand the physical scope, layout, and construction details of the work required for the "Fourth Floor New Plan." It informs the technical approach, material selection, and overall cost estimation for proposals. Bidders must carefully review these plans to ensure their proposals accurately reflect the project's requirements.

Solicitation / RFP / RFQ

This document outlines the general requirements for a construction project to renovate the existing primary care space on the fourth floor of Building 3 to improve PACT implementation. The project includes substantial improvements to the HVAC system, accessibility, and restroom upgrades. The contractor will be responsible for site preparation, demolition, and new construction as per drawings and specifications.

• General construction, alterations, and necessary removal of existing building elements.

• Renovation of existing primary care space.

• Improvements to HVAC system, accessibility, and restroom upgrades.

• Site preparation and demolition.

• Compliance with safety and infection control requirements.

• Adherence to VA security management program.

• The document specifies two bid items: Bid Item I (Base) for the full scope of work, and Bid Item II (Deduct Alternate No. 1) which excludes certain north-central portions of Section B from full demolition and renovation, opting for light demolition and cosmetic updates (paint, ceiling, flooring).

• Site visits by bidders require an appointment with the Medical Center Engineering Department's Officer (COR).

• Drawings and contract documents are available online where the solicitation is posted, with additional copies at the contractor's expense.

• Security plan requirements include physical and administrative procedures, contractor responsibility for subcontractors, and specific security procedures for employees and site access.

• A security memorandum detailing the approach to confidentiality of sensitive information must be submitted before work begins.

• As-built drawings must be maintained and submitted.

• A Warranty Management Plan is required.

• Not explicitly stated in this section, but VA security requirements and site access protocols are detailed.

• The document details extensive requirements for safety, security, operations, storage, utilities, restoration, and documentation, including construction signs, safety signs, and photographic documentation.

Form / Attachment / Pricing Sheet

This document appears to be a floor plan, specifically labeled "FIRST FLOOR PLAN" for "BLDG 3, UNIT A-5". It provides detailed architectural and structural information for a building or a section of a building.

• Detailed layout of rooms, walls, doors, and windows.
• Dimensions and measurements for various building components.
• Symbols indicating structural elements, fixtures, and utilities.
• A legend or key for interpreting symbols (though not fully legible in the provided image).
• A table or schedule listing specific items, quantities, or specifications (partially visible on the right side).

This document is crucial for any bidder involved in construction, renovation, or site assessment related to "BLDG 3, UNIT A-5". It provides the foundational physical specifications necessary for:

• Estimating material and labor costs.
• Developing construction or work plans.
• Understanding the physical scope of work.
• Identifying potential site constraints or requirements.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document specifies the requirements for Contractor Quality Control (CQC) for construction projects.

• Establishes and requires an effective quality control (QC) system that complies with FAR Clause 52.246.12, "Inspection of Construction."

• QC system encompasses plans, procedures, and organization for producing an end product that meets contract requirements.

• Covers all design and construction operations, both onsite and offsite.

• The Project Superintendent is responsible for overall construction activities and quality.

• Requires adherence to quality control standards throughout all phases of work.

• Performance is monitored through three phases: Preparatory, Initial, and Follow-Up.

• Specific metrics and checks are detailed for each phase, including reviews of specifications, drawings, materials, testing, and safety.

• Government acceptance of CQC plans and inspections is required.

• Not explicitly defined in this document, but it applies to all construction operations, both onsite and offsite.

• CQC Plan Submission: Must be submitted within 15 calendar days after receipt of Notice to Proceed (NTP).

• Personnel: Requires a Safety and Health Manager, a CQC System Manager (graduate engineer, architect, or construction management graduate), and sufficient qualified personnel.

• CQC System Manager Qualifications: Specific experience and education requirements are detailed for various areas (Civil, Mechanical, Electrical, Structural, Architectural, Environmental, Submittals, Concrete/Pavement/Soils, Testing, Adjusting, and Balancing).

• Training: CQC System Manager and Alternate must complete the Construction Quality Management (CQM) for Construction course.

• Documentation: Requires maintenance of current records for all QC activities and tests, including daily reports, verification statements, and submittals.

• Testing: Specifies requirements for testing procedures, laboratories, and onsite testing.

• Inspections: Details requirements for Punch-Out, Pre-Final, and Final Acceptance Inspections.

• Noncompliance: Outlines procedures for notifying the contractor of noncompliance and potential stop-work orders.