Y1DZ--EHRM Infrastructure Upgrades Tier 1 Construction 695-21-700 Milwaukee

Amendment / Modification

This amendment modifies the solicitation by:

• Rescheduling the site visit (referencing Amended RFP Attachment 2 - Site Visit).

• Extending the cut-off date and time for RFIs/Technical Questions to Wednesday, May 20, 2026, at 12:00 PM ET.

• Extending the proposal due date to the date specified in Block 11 of this amendment.

• Incorporating FAR Clause 52.222-90, "Addressing DEI Discrimination by Federal Contractors (APR 2026)," into the solicitation, which will be included in the awarded contract.

• Site visit details (via Amended RFP Attachment 2).

• RFI/Technical Question deadline.

• Proposal due date.

• Incorporation of FAR Clause 52.222-90.

• The proposal due date has been extended to June 24, 2026, at 12:00 PM EDT.

• Offerors must acknowledge receipt of this amendment.

Amendment / Modification

• The organized site visit for the EHRM Infrastructure Upgrades Tier 1 Construction Project at the Clement J. Zablocki VA Medical Center (VAMC) in Milwaukee, WI has been rescheduled.

• The new date for the site visit is Wednesday, May 6, 2026, at 8:30 AM CT.

• All other site visit details remain unchanged.

• Site visit date and time.

• None explicitly stated, but bidders should note the updated site visit schedule.

Solicitation / RFP / RFQ

This solicitation (RFP 36C77626R0002) is for the EHRM Infrastructure Upgrades construction project at the Clement J. Zablocki VA Medical Center in Milwaukee, WI. The estimated magnitude of construction is between $50,000,000 and $100,000,000. This procurement is a 100% set-aside for Service-Disabled Veteran-Owned Small Business (SDVOSB) concerns.

• Provide all labor, equipment, materials, and supervision necessary to complete the EHRM Infrastructure Upgrades project.

• Work includes demolition, earthwork, site restoration, carpentry, HVAC, electrical, telecommunications, plumbing, and fire suppression modifications.

• Projects must be completed in a first-class manner.

• Specific requirements for infection control, risk mitigation, utility outages, and life safety are detailed.

• Contract Type: Firm-Fixed-Price.

• Period of Performance: Begin within 10 calendar days of notice to proceed, complete within 1,460 calendar days.

• Estimated Value: $50,000,000 to $100,000,000.

• Proposals are due by 12:00 PM EST on June 17, 2026.

• Proposals must be submitted electronically via email to Bailey Donato (bailey.donato@va.gov) and Megan Dohm (megan.dohm@va.gov).

• Proposals must be submitted in three volumes: Technical, Price, and Administrative.

• Technical factors (Past Performance, Experience Modification Rate, Proposed Project Team, Phasing Narrative) are significantly more important than price.

• Evaluation will be based on a "Best Value" tradeoff process.

• Key deadlines: Questions due May 13, 2026, 12 PM ET.

• 100% SDVOSB set-aside.

• Offerors must be certified as SDVOSBs by the SBA and listed in the SBA certification database at the time of proposal submission and award.

• Drawings and specifications can be obtained from SAM.gov.

• A pre-proposal site visit is scheduled (see Attachment 2).

• Offerors must attend any Post Award Conference.

• Bid Guarantee required (Standard Form 24), not less than 20% of proposal price, not to exceed $3,000,000.

• Payment and Performance Bonds required (Standard Forms 25 and 25A).

Form / Attachment / Pricing Sheet

This document contains drawings related to the EHRM Infrastructure Upgrades - Milwaukee, WI project, specifically for Building 111. It details the "Technology" aspects of the sub-basement and first through fifth floors, broken down by area (e.g., Area A, Area B, etc.).

• Building 111 Plans: Includes detailed floor plans for the sub-basement, first floor, second floor, third floor, fourth floor, and fifth floor.
• Technology Focus: The drawings specifically illustrate the "Technology" infrastructure layout for each floor.
• Area Breakdowns: Each floor is further divided into specific areas (e.g., Area A, Area B, Area K, Area L) for detailed planning.
• Project Information: Associated with Project Number 695-21-700, "EHRM Infrastructure Upgrades - Milwaukee, WI."
• Issue Date: September 05, 2025.

These drawings are crucial for bidders to understand the physical layout and intended placement of technology infrastructure, including telecommunications rooms, pathways, and potential data drop locations across multiple floors of Building 111. This information is essential for accurate bidding, material estimation, and site preparation planning.

Form / Attachment / Pricing Sheet

This document contains architectural drawings for "EHRM INFRASTRUCTURE UPGRADES - MILWAUKEE, WI" at Building 111, specifically focusing on the "Technology" aspects of the sixth, seventh, eighth, and ninth floors, as well as demolition plans for Building 112 and 113, and overall plans for Building 144.

• Building 111: Detailed floor plans for the sixth through ninth floors, showing the layout of technology infrastructure, including telecommunication rooms, data drops, and cabling pathways.
• Building 112: First Floor Demolition Plan and First Floor Plan, detailing technology infrastructure and areas for demolition or installation.
• Building 113: Basement Demolition Plan, Basement Floor Plan, and First Floor Demolition Plan, outlining technology infrastructure and areas for demolition.
• Building 144: Basement Overall Demolition Plan, Basement Demolition Plan (Areas A, B, C, D, E, F), and First Floor Demolition Plan (Area A), detailing technology infrastructure and demolition scope.
• General Notes: Common notes across multiple drawings include:
  • Referencing other detail drawings for technology rough-in, riser diagrams, and penetration details.
  • Specification that all network cables shall terminate in designated telecommunication rooms (e.g., TR-111-6410B, TR-111-7412, TR-111-8409, TR-111-9409, TR-111-10409).
  • Requirement for contractors to provide new J-hook routes for cabling.
  • Allowance for a 10% variance in the total number of newly installed data drops.
  • Inclusion of an allowance for 10% additional 2-port CAT6A information outlets in proposals.
  • Note that future information outlet locations will be determined by the VA.

These drawings are critical for bidders to understand the scope of work related to technology infrastructure installation and demolition across multiple buildings. They provide detailed layouts of existing and proposed telecommunications infrastructure, including the location and type of data drops, telecommunication rooms, and cabling requirements. Bidders must use these plans to accurately estimate costs, plan installation strategies, and ensure compliance with all specified requirements and notes.

Form / Attachment / Pricing Sheet

This document contains "RFP Attachment 34 - Drawings 695-21-700 Part 27.pdf", which includes various technical drawings related to the EHRM Infrastructure Upgrades project at the Milwaukee VA Medical Center. These drawings detail the first-floor and basement plans, including demolition plans and technology infrastructure layouts for different areas (A, B, C, D, E, F) of Building 144, as well as similar plans for Buildings 146, 147, and 148. It also includes details on telecommunication rooms, pathways, equipment rack elevations, and site riser diagrams for fiber optic and copper cabling.

• Building Plans: Demolition and technology plans for Building 144 (first floor and basement), and similar plans for Buildings 146, 147, and 148.
• Telecommunication Room Details: Enlargements, pathways, and equipment rack elevations for numerous telecommunication rooms (TRs) across various buildings.
• Riser Diagrams: Site fiber optic and copper riser diagrams for Buildings 3, 4, 6, 7, 20, 43, 70, 97, 102, 107, 108, 109, 111, 112, 113, 123, 144, 146, 147, and 148, illustrating the backbone connectivity.
• Technical Details: Specific details on technology rough-in, exterior wall penetrations, fire barrier penetrations, pathway/rack bonding conductor requirements, and controlled security scheme (CSS) type schedules.

These drawings are critical for bidders to understand the existing conditions, proposed technology infrastructure, and the scope of work related to cabling, telecommunication room setup, and system integration for the EHRM Infrastructure Upgrades project. They provide detailed layouts and specifications necessary for accurate bidding and project execution.

Forms / Attachments / Pricing Sheets

This document contains the "RFP Attachment 8 - Drawings 695-21-700 Part 1.pdf", which provides detailed architectural and engineering drawings for the EHRM Infrastructure Upgrades project in Milwaukee, WI. These drawings are essential for bidders to understand the scope, layout, and technical specifications of the proposed upgrades.

• Project Identification: EHRM Infrastructure Upgrades, Milwaukee, WI, Project Number 695-21-700.
• Drawings Index: A comprehensive list of all drawings included in the project, categorized by discipline (General, Civil, Structural, Architectural, Fire Protection, Plumbing, Mechanical, Electrical, Technology).
• General Notes: Outlines responsibilities of the General Contractor, site inspection requirements, notification procedures for discrepancies, code compliance, coordination with other consultants, and submission requirements.
• Scope of Work Summary: Details the project's objective to upgrade facilities fiber, relocate/consolidate telecommunications rooms, remove abandoned equipment, provide redundant fiber runs, install new main fiber lines, upgrade IT infrastructure, and upgrade facility power distribution.
• Annotation Drawing Symbols & Architectural Symbols: Provides a legend for understanding the various symbols and notations used throughout the drawings.
• Project Team Information: Lists the Owner, Contracting Officer's Representative, Architect/Engineer, and various discipline engineers.
• Infection Control Risk Assessment (ICRA) Details: Includes detailed information and diagrams for ICRA Class I, II, III, and IV, outlining containment, dust control, and safety measures required during construction, particularly important for a healthcare facility.
• Code Summary: Lists applicable codes and standards, including NFPA editions, and details fire sprinkler and fire alarm system design criteria.
• Occupancy Tables: Provides detailed square footage and occupancy classifications for various buildings and floors within the facility.
• Life Safety Plans: Detailed floor plans for multiple buildings (03, 04, 05, 06, 07, 20, 43, 70, 97, 102, 107, 108, 109, 111, 112, 113, 123, 144, 146, 147, 148) illustrating means of egress, fire barriers, and life safety features.

These drawings are critical for bidders to accurately assess the project's scope, complexity, and potential challenges. They provide the necessary visual and technical information to develop a comprehensive proposal, including accurate cost estimates, construction methodologies, and timelines. The detailed life safety and ICRA information is particularly important for understanding site-specific requirements and safety protocols during construction within an active healthcare environment.

Form / Attachment / Pricing Sheet

This document contains architectural and engineering drawings, specifically "Building 111 Second Floor Demolition Plan - Technology - Area I" and other related floor plans for Building 111. These drawings detail the existing conditions and planned demolition for technology infrastructure upgrades.

• Floor plans for various areas and floors of Building 111.
• Demolition plans indicating areas for removal.
• Technology infrastructure details.
• Project information including project number (695-21-700), building number (111), and issue date (September 05, 2025).

These drawings are crucial for bidders to understand the scope of work related to the "EHRM Infrastructure Upgrades - Milwaukee, WI" project. They provide detailed layouts of the areas affected by the demolition and technology upgrades, which is essential for accurate bidding, site assessment, and planning of the work.

Form / Attachment / Pricing Sheet

This document contains drawings and associated notes related to the EHRM Infrastructure Upgrades project in Milwaukee, WI. It serves as a reference for bidders to understand the site conditions, proposed improvements, and construction requirements.

• General Notes: Outlines compliance with City of Milwaukee and Wisconsin DNR standards, contractor responsibilities for underground facilities, debris disposal, protection of existing improvements, concrete specifications, cleanup, and soil disposal.
• Grading Notes: Details requirements for elevations, positive drainage, soil preparation (scarifying and re-compaction), fill material specifications, stormwater runoff management, embankment slopes, erosion control, and topsoil depth.
• Erosion Control Notes: Specifies requirements for installing erosion control measures prior to grading, maintaining construction entrances, managing pumped water, seeding disturbed areas, and adhering to state and local regulations.
• Utility Notes: Emphasizes contractor responsibility for protecting existing utilities, verifying locations, potholing, and coordinating with utility companies. It also details requirements for utility piping installation and adjustment of appurtenances.
• Legend: Provides a key for various symbols and line types used on the drawings, representing different utilities, structures, and site features.
• Drawings: Includes a site map with marked locations of existing utilities and proposed improvements, along with graphic scales for various drawing representations.

This document is crucial for bidders to understand the scope of work, site conditions, and specific construction standards and requirements. It informs proposal preparation by detailing grading, erosion control, utility protection, and material specifications. Bidders must carefully review these drawings and notes to accurately estimate costs and plan their approach to the project.

Form / Attachment / Pricing Sheet

This document contains "Existing Conditions and Demolition Plan" drawings for the EHRM Infrastructure Upgrades project at the Milwaukee, WI VA facility. These plans detail areas requiring demolition, including pavement, curb and gutter, sidewalks, trees, and other structures, as well as areas to be protected during construction.

• Demolition areas are clearly marked on site plans.
• Specific instructions for protecting trees and light poles are provided.
• Notes indicate that all replaced pavement, gravel, curb, and gutter must match existing elevations, drainage patterns, thicknesses, and styles unless otherwise specified.
• The drawings cover various buildings and site areas, including Buildings 20 & 97, 107 & 108, 123, secondary connections, Buildings 5, 6 & 7, Buildings 3 & 4, and Buildings NRF & 150.

These drawings are critical for bidders to understand the scope of work related to site preparation and demolition. They will inform cost estimations, scheduling, and the identification of potential site challenges. Bidders must carefully review these plans to accurately bid on the removal of existing infrastructure and the preparation of the site for new installations.

Form / Attachment / Pricing Sheet

This document contains a series of site plans related to the EHRM Infrastructure Upgrades project in Milwaukee, WI. These drawings detail various aspects of the site, including utility locations, grading, and infrastructure elements.

• Site Plans: Detailed drawings of different areas including Southwest Pond, Buildings 109 & 152, East Pond, Buildings 146, 147 & 148, Buildings 20 & 97, Building 123, and Secondary Connection.
• Infrastructure Details: Depicts locations of fiber manholes, duct banks, conduits, culverts, PCC curb and gutter, pavement patches, and sidewalk patches.
• Elevation and Invert Data: Includes specific elevation and invert levels for various underground utilities and structures.
• Revisions: A log of revisions made to the drawings is provided, with dates ranging from May 2021 to June 2023.

These drawings are critical for bidders to understand the existing site conditions, the proposed infrastructure layout, and the specific locations where work will be performed. They provide essential details for planning, estimating, and executing the project, including the placement and specifications of underground utilities and surface improvements.

Form / Attachment / Pricing Sheet

This document contains detailed drawings related to the EHRM Infrastructure Upgrades project in Milwaukee, WI. It includes an overall erosion control plan and specific erosion control plans for Buildings 5, 6, and 7. These drawings are part of the final bid documents.

• Sheet 100-CG100: Overall Erosion Control Plan, showing site-wide erosion control measures.
• Sheet 100-CG101: Erosion Control Plan for Buildings 5, 6 & 7, detailing specific measures for these structures.
• The drawings include various revisions noted with dates, indicating design progression.
• They also specify scales, consultant information (IMEG, Romanyk Consulting), and project details (Project Number 695-21-700, Project Title EHRM INFRASTRUCTURE UPGRADES - MILWAUKEE, WI).

Bidders must review these drawings to understand the site conditions, proposed erosion control measures, and any associated requirements for the project. This information is critical for planning construction activities, estimating costs, and ensuring compliance with environmental regulations during the project execution.

Specifications

This document contains the specifications for the Department of Veterans Affairs Milwaukee EHRM Infrastructure Upgrades project, Project Number 695-21-700, VISN 12. It is dated September 5, 2025, and includes final bid documents.

• Specifications: Details the technical requirements for the project.
• Seals Page: Lists the registered architects and engineers involved, with their seals and dates of certification.
• Table of Contents: Outlines the various divisions and sections of the specifications, including:
  • Division 00: Special Sections (Table of Contents, List of Drawing Sheets)
  • Division 01: General Requirements (General Requirements, Submittals, Safety, Testing, Waste Management, Environmental Controls, etc.)
  • Division 02: Existing Conditions (Demolition, Asbestos Abatement, Lead-Based Paint Removal)
  • Division 03: Concrete (Cast-in-Place Concrete)
  • Divisions 04-33: Cover various construction trades including Masonry, Metals, Wood, Thermal and Moisture Protection, Openings, Finishes, Specialties, Equipment, Furnishings, Special Construction, Conveying Equipment, Fire Suppression, Plumbing, HVAC, Integrated Automation, Electrical, Communications, and Electronic Safety and Security.
  • Division 31: Earthwork
  • Division 32: Exterior Improvements
  • Division 33: Utilities
• List of Drawing Sheets: Provides a comprehensive index of all architectural, civil, structural, fire protection, plumbing, mechanical, electrical, communications, and electronic safety and security drawings related to the project.

This document is crucial for potential bidders as it outlines the comprehensive technical requirements, scope of work, and specific details for the EHRM Infrastructure Upgrades project at the Milwaukee VAMC. It details the various systems and components involved, including demolition, asbestos abatement, concrete work, and extensive electrical, mechanical, plumbing, and communication system requirements across multiple buildings. The detailed list of drawings and specifications provides a clear understanding of the project's complexity and the specific standards that must be met. Bidders must review these specifications thoroughly to accurately estimate costs, develop project schedules, and ensure compliance with all stated requirements.

Form / Attachment / Pricing Sheet

This document, "RFP Attachment 4 - Limitations on Subcontracting - Milwaukee.docx," outlines the mandatory limitations on subcontracting for offerors responding to this solicitation. It requires bidders to certify their compliance with specific subcontracting percentages based on the contract type.

• Services Contract: Offerors must certify that they will not pay more than 50% of the government-paid amount to firms that are not certified Small, Disadvantaged, Veteran-Owned Small Businesses (SDVOSBs) or Veteran-Owned Small Businesses (VOSBs).
• General Construction Contract: Offerors must certify that they will not pay more than 85% of the government-paid amount to firms that are not certified SDVOSBs or VOSBs. Costs of materials are excluded.
• Special Trade Construction Contractors: Offerors must certify that they will not pay more than 75% of the government-paid amount to firms that are not certified SDVOSBs or VOSBs. Costs of materials are excluded.
• Certification Requirement: Offerors must complete, sign, and return this certification with their bid, quotation, or proposal. Failure to do so will render the offer ineligible for award.
• Penalties: False certifications are subject to criminal, civil, or administrative penalties, including prosecution under Title 18, United States Code, Section 1001.
• Compliance Verification: The offeror agrees to cooperate and provide documentation (e.g., invoices, subcontracts) to the VA to demonstrate compliance upon request, both during performance and upon completion of the contract.

This attachment is critical for bidders to understand the subcontracting restrictions applicable to the opportunity. Bidders must carefully review these limitations and ensure their proposed approach and pricing comply. The completed and signed certification is a mandatory submission requirement for bid eligibility.

Form / Attachment / Pricing Sheet

This document is a General Decision for wage rates applicable to building construction projects in Milwaukee, Ozaukee, Washington, and Waukesha Counties, Wisconsin. It provides prevailing wage rates for various construction trades and their corresponding fringe benefits.

• General Decision Number: WI20260001
• Publication Date: 01/02/2026
• Construction Type: Building
• Geographic Area: Milwaukee, Ozaukee, Washington, and Waukesha Counties, Wisconsin.
• Classifications and Rates: Lists specific trades (e.g., Asbestos Removal Worker, Boilermaker, Electrician, Plumber, Truck Driver) with their respective hourly wage rates and fringe benefits.
• Executive Orders: Includes notes on Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Federal Contractor Minimum Wage).
• Wage Determination Appeals Process: Outlines the procedure for appealing wage determinations.

This document is crucial for bidders to understand the labor costs associated with the opportunity. It specifies the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on the construction project, ensuring compliance with federal labor standards. Bidders should use these rates to accurately estimate their labor costs when preparing their proposals.

Other / Unclassified

This document announces an organized site visit for the EHRM Infrastructure Upgrades Tier 1 Construction Project at the Clement J. Zablocki VA Medical Center (VAMC) in Milwaukee, WI. The site visit is scheduled for Wednesday, April 29, 2026, at 8:30 AM CT.

Potential bidders should note the following details for the site visit:

• Meeting Point: Clement J. Zablocki VAMC, 5000 West National Ave, Milwaukee, WI 53295, Parking Lot #36 (Mid-Campus).
• Requirements:
  • No badging or security requirements while escorted by a VA Employee.
  • A maximum of two representatives per firm are allowed.
  • Parking is available in the Contractor Parking Lot.
  • Attendees should be prepared for extensive walking and wear comfortable shoes.
• Point of Contact: Jim Beier at (414) 312-3392.

Form / Attachment / Pricing Sheet

This document is a campus map of the Clement J. Zablocki VA Medical Center in Milwaukee, Wisconsin. It is intended to help visitors and potential bidders navigate the facility.

• The map displays various buildings, parking lots, and roads within the medical center campus.
• A legend indicates different types of buildings (EUL Building, VA Building) and parking areas (EUL Parking, Contractor Parking).
• Lot numbers are provided for various parking areas.
• Specific points of interest are highlighted, including:
  • "Meet IVO 0830 4/29/26 Parking Lot #36 Wank Aaron State Trail"
  • "Contractor Parking Lot"

This map is relevant for bidders attending a site visit, as it shows the location of the VA Medical Center and specific parking areas designated for visitors or contractors. It helps in planning arrival and locating meeting points.

Form / Attachment / Pricing Sheet

This document, "RFP Attachment 3 - Division Cost Breakdown - Milwaukee.xlsx", is an Excel file containing a detailed cost breakdown by division for a construction project. It is intended to provide bidders with a structured format for estimating and submitting project costs.

• The document is organized into sheets, with the primary sheet being "SUMMATION", followed by detailed breakdowns for various construction divisions (e.g., DIVISION 00 - SPECIAL SECTIONS, DIVISION 01 - GENERAL REQUIREMENTS, through DIVISION 48 - ELECTRICAL POWER GENERATION).
• Each division sheet includes columns for labor and materials, with sub-columns for quantity, unit, cost per unit, and total cost.
• The "SUMMATION" sheet provides subtotals for each division, as well as calculations for overhead, profit, and bonds, culminating in a project total.
• All cost breakdowns currently show $0.0, indicating that no specific cost figures have been entered or finalized within this template.

Bidders are expected to use this template to provide their cost estimates for the various construction divisions. The detailed breakdown will help in understanding the cost structure and ensuring all components of the project are accounted for in their proposals. The current zero values suggest this is a template to be filled out by the bidder.

Form / Attachment / Pricing Sheet

This document provides detailed specifications for various HVAC components, including motors, controllers, and related accessories. It outlines the requirements for their selection, installation, and performance.

• Motors: Specifies requirements for alternating current motors (fractional and integral horsepower), severe duty TEFC motors, and variable speed motor controllers. It details NEMA Design B, efficiency standards, voltage ratings, and special requirements for specific applications.
• Controls: Outlines requirements for direct-digital control (DDC) systems, including BACnet compatibility, network architecture, device instances, and naming conventions. It also details requirements for sensors (temperature, humidity, pressure, flow), actuators, and the engineering control center (ECC).
• Equipment and Materials Identification: Specifies requirements for labeling equipment with manufacturer details, model numbers, and performance data.
• HVAC Mechanical Systems Welding: Requires compliance with ASME BPVC Section IX and AWS standards for welding procedures and operator qualifications.

This document is crucial for bidders as it defines the technical specifications and quality standards for HVAC components. Understanding these requirements is essential for selecting and procuring the correct equipment, ensuring proper installation, and meeting the project's performance and compliance standards. It also details the responsibilities of the contractor and the control system integrator.

Form / Attachment / Pricing Sheet

This document provides specifications for "Flowable Fill" materials, which are a cementitious slurry used as a substitute for compacted earth in fill or backfill applications. It outlines the requirements for its composition, mix design, testing, and performance.

• Definition: Flowable fill is a cementitious slurry (fine aggregate, water, cementitious material) used as an alternative to compacted soil.
• Types:
  • Permanent type: Designed not for future removal, with a minimum compressive strength of 2.1 MPa (300 psi) at 28 days.
  • Excavatable type: Designed for machine or hand excavation, with maximum compressive strengths of 1.5 MPa (200 psi) at 1 year (machine) or 0.7 MPa (100 psi) at 1 year (hand tool).
• Mix Design: Must include cement, water, and optionally fly ash, aggregate, or chemical admixtures. Must meet strength, flow consistency, and shrinkage requirements.
• Permeability: Must be equal to or greater than that of the surrounding soil.
• Testing: Requires minimum strength of 2.1 MPa (300 psi) at 28 days, minimal subsidence and bleed water shrinkage, and a unit weight of 1500-1900 kg/m³.
• Applicable Standards: ASTM D1556, D2167, D6938, D2487, D2940, D448, D975, D1751, D2564, D2609, D2683, D2855, ASTM C33, C94, C150, C618, C494, C685, C171, C309, and ASTM D4832.

This document is crucial for bidders who will be responsible for providing and installing flowable fill. It details the specific material properties, mix designs, testing requirements, and applicable standards that must be met. Understanding these requirements is essential for accurate bidding, material selection, and successful project execution. Bidders must ensure their proposed flowable fill meets the specified strength, permeability, and other performance criteria to be considered compliant.

Forms / Attachments / Pricing Sheets

This document contains detailed life safety plans for various buildings within the EHRM Infrastructure Upgrades project in Milwaukee, WI. These plans are crucial for understanding egress routes, fire barriers, smoke zones, and the placement of life safety equipment.

• Floor Plans: Detailed layouts for multiple floors across Buildings 111, 112, 113, 123, 144, 146, 147, and 148.
• Life Safety Legend: Symbols and their meanings for emergency lights, fire extinguishers, exits, fire alarms, etc.
• Barrier Legend: Definitions for various fire and smoke barriers (e.g., 1-hour fire barrier, 2-hour fire/smoke zone barrier).
• Code Summary: Occupancy types (Healthcare, Ambulatory Healthcare, Dormitory, Business), sprinkler status (Fully Sprinklered), and square footage for each building/floor.
• Life Safety Notes: General information regarding NFPA 13 compliance, smoke detection systems, and coordination requirements.

These drawings are essential for bidders to understand the existing conditions and life safety requirements of the facilities where work will be performed. They inform decisions regarding site access, work sequencing, and compliance with safety regulations. Bidders should pay close attention to egress paths, fire-rated construction, and any specific room designations that may impact construction activities or require special safety considerations.

Form / Attachment / Pricing Sheet

This document contains a series of drawings detailing existing conditions and demolition plans for the EHRM Infrastructure Upgrades project at 5000 W. National Avenue, Milwaukee, WI. It is intended to guide bidders on the scope of demolition work required.

• Overall Existing Demolition Plan (Sheet 100-CD100): Provides a high-level overview of demolition areas.
• Existing Conditions and Demolition Plans (Sheets 100-CD101 through 100-CD108): These sheets detail specific demolition activities for various buildings (5, 6, 7, 3, 4, NRF, 150, Southwest Pond, Buildings 109, 152, 124, 70, and 146, 147, 148) and areas.
• Demolition Actions: Includes removal of pavement, sidewalks, curbs, gutters, hedges, trees, signs, and existing generators/pads.
• Protection Measures: Indicates items to be protected, such as poles, handholes, valves, signs, trees, structures, columns, and street lights.
• Revisions: A revision log is present, indicating updates to the drawings.

These drawings are critical for bidders to understand the physical scope of work, identify existing site features that require removal or protection, and accurately estimate costs and timelines for the demolition aspects of the project. Bidders must carefully review these plans to ensure all specified demolition and protection requirements are incorporated into their proposals.

Form / Attachment / Pricing Sheet

This document contains a series of civil engineering drawings related to erosion control and site infrastructure for the EHRM Infrastructure Upgrades project at 5000 W. National Avenue, Milwaukee, WI. These drawings provide detailed site plans, including topography, utility locations (storm drains, pipes, manholes), and erosion control measures.

• Site Plans: Detailed layouts of existing and proposed infrastructure.
• Topographical Data: Contour lines indicating elevation changes.
• Utility Information: Locations, sizes, and invert/rim elevations of storm drains, pipes (PVC, RCP, CLAY), and manholes.
• Erosion Control Measures: Specific plans for managing soil erosion during construction.
• Building Locations: Identification of buildings (e.g., Buildings 3 & 4, NRF, Southwest Pond, Buildings 109 & 152, Buildings 124 & 70, East Pond, Buildings 20 & 97).
• Project Information: Includes project title (EHRM Infrastructure Upgrades), project number (695-21-700), and issue date (September 5, 2025).

These drawings are critical for bidders to understand the physical site conditions, the scope of civil work required, the location and type of existing and proposed utilities, and the specific requirements for erosion control. This information is essential for accurate cost estimation, project planning, and proposal development.

Forms / Attachments / Pricing Sheets

This document contains detailed engineering drawings related to the EHRM Infrastructure Upgrades project in Milwaukee, WI. It includes:

• Sheet 100-CG110: Erosion Control Plan for Buildings 107 & 108.
• Sheet 100-CG111: Erosion Control Plan for Building 123.
• Sheet 100-CU100: Fiber Backbone Key, showing the overall layout.
• Sheet 100-CU101: Profile View of the Fiber Backbone, detailing elevations and existing utility crossings.

These drawings provide site-specific details for infrastructure upgrades, including:

• Topographical information and contour lines.
• Locations of proposed and existing utilities (storm, water, sanitary, electric, telephone).
• Details of manholes, pipes (RCP, PVC), and grates with invert and rim elevations.
• Erosion control measures.
• Fiber backbone routing and profile.

These drawings are critical for bidders to understand the physical site conditions, the scope of the proposed infrastructure work, and the specific locations and types of utilities involved. They are essential for accurate bidding, site planning, and execution of the project.

Form / Attachment / Pricing Sheet

This document contains detailed engineering drawings and profile views for the "EHRM INFRASTRUCTURE UPGRADES - MILWAUKEE, WI" project, specifically related to the "FIBER BACKBONE" component. It provides critical spatial and elevation data for the proposed fiber optic infrastructure.

• Plan Views: Illustrate the horizontal layout of the fiber backbone, including its path, manhole locations, and crossings with existing utilities (sanitary, storm, water, electric, gas, telephone).
• Profile Views: Depict the vertical alignment of the fiber backbone, showing elevations, depths, slopes, and invert levels at various points and manholes.
• Utility Crossings: Detail the locations and types of existing utilities that the new fiber backbone will cross or interact with.
• Building Connections: Show connections to various buildings (e.g., BLDG 107, BLDG 108, BLDG 20, BLDG 97, BLDG 109, BLDG 120, BLDG 124).
• Notes and Revisions: Includes important notes regarding utility depth verification and a revision history.

These drawings are essential for bidders to understand the physical scope, routing, and installation requirements of the fiber backbone. They provide the necessary geometric and elevation data for accurate cost estimation, construction planning, and site assessment. Bidders must review these drawings to fully comprehend the work involved in installing the fiber optic infrastructure and to identify potential challenges related to existing utilities and site topography.

Forms / Attachments / Pricing Sheets

This document contains detailed engineering drawings and profile views of proposed storm drainage systems, including manholes and pipe layouts. It is intended to provide specific design information for the "EHRM INFRASTRUCTURE UPGRADES - MILWAUKEE, WI" project.

• Plan Views: Illustrate the horizontal layout of proposed storm sewer lines, manholes, and connections to existing utilities.
• Profile Views: Show the vertical alignment, invert elevations, pipe slopes, and rim elevations for proposed storm sewer segments and manholes.
• Utility Crossings: Depict existing utilities (electric, gas, telephone, storm, fiber) and their locations relative to the proposed storm system.
• Notes: Includes a critical note stating that all utility depths are approximate and must be verified by the contractor using ground penetrating radar and potholing.
• Revision History: Tracks various stages of design submission (35%, 65%, 95%).

These drawings are essential for bidders to understand the scope and complexity of the underground utility work, specifically the storm drainage system. Bidders must use this information to accurately estimate costs, identify potential site challenges, and plan their construction approach. The note regarding utility verification is crucial for risk assessment and planning.

Form / Attachment / Pricing Sheet

This document contains drawings and details related to the EHRM Infrastructure Upgrades project at 5000 W. National Avenue, Milwaukee, WI. It includes storm plan and profile details for manholes 22 through 35, civil details, structural details for new equipment pads, and demolition plans for various buildings (03, 04, 05, 06, 07, 20, 43, 70, 97, 102, 107, 108, 109).

• Storm Plan and Profile Drawings: Detailed views of proposed manholes, including invert elevations, pipe sizes, slopes, and lengths.
• Civil Details: Information on concrete curb and gutter, utility trench patching, and concrete header construction.
• Structural Details: Specifications for new equipment pads, including concrete slab reinforcement and dimensions.
• Demolition Plans: Floor plans for various buildings indicating areas not in the project scope, existing walls to remain, and areas/components to be removed.
• General Notes: Project-wide notes covering safety, coordination, materials, and construction procedures.

This document is crucial for bidders to understand the existing site conditions, proposed infrastructure changes (specifically storm drainage), and the scope of demolition work required across multiple buildings. It provides essential details for accurate bidding and project execution, particularly concerning site work, utility infrastructure, and building renovations.

Forms / Attachments / Pricing Sheets

This document contains architectural drawings, specifically floor plans and reflected ceiling plans, for various buildings (109, 111, 112, 113, 123, 144, 146, 147, 148) as part of the EHRM Infrastructure Upgrades - Milwaukee, WI project. It also includes details on partition types, door schedules, and fire protection plans.

• Floor Plans: Detailed layouts of different building levels, indicating room configurations, telecommunications rooms, and other spaces.
• Reflected Ceiling Plans (RCP): Illustrate ceiling layouts, including fixtures and exposed ceiling areas.
• Demolition Plans: Outline areas and components designated for removal.
• Partition Types: Specifications for various wall constructions, including fire ratings and sound attenuation.
• Door Schedules: Lists doors with their types, sizes, materials, hardware, and fire ratings.
• Fire Protection Plans: Detail sprinkler system modifications, including demolition and new installation areas.
• General Notes: Provide overarching instructions for contractors regarding verification, compliance, safety, and coordination.

These drawings are critical for bidders to understand the existing conditions, the scope of work (including demolition and new construction), and the specific requirements for materials, construction methods, and finishes. They are essential for accurate bidding, project planning, and execution of the EHRM Infrastructure Upgrades project.

Forms / Attachments / Pricing Sheets

This document contains detailed architectural drawings related to fire protection systems for various buildings within the EHRM Infrastructure Upgrades project at 5000 W. National Avenue, Milwaukee, WI. The drawings specify areas requiring fire sprinkler demolition and installation.

• Building Plans: Floor plans for Buildings 06, 07, 43, 70, 102, 109, and 111, detailing the scope of fire protection work.
• Demolition Scope: Cross-hatched areas on the plans indicate where existing fire sprinkler systems are to be demolished.
• Installation Scope: Key notes specify the reconfiguration of piping and installation of new sprinkler heads in accordance with VA standards and NFPA 13.
• Specific Areas: Enlarged plans are provided for specific rooms and areas within buildings where detailed work is required.
• Compliance: Work must adhere to NFPA 13 Ordinary Hazard Group 1 occupancy standards and VA site requirements.

These drawings are critical for bidders to understand the physical scope of work for fire protection system modifications, including demolition and installation, across multiple buildings. They provide the necessary detail to estimate labor, materials, and time required for compliance with project specifications and safety standards.

Form / Attachment / Pricing Sheet

This document contains architectural and engineering drawings related to the EHRM Infrastructure Upgrades - Milwaukee, WI project. Specifically, it details fire protection and plumbing plans for various buildings (111, 123, 03, 04, 05, and 06) at the 5000 W. National Avenue, Milwaukee, WI location.

• Fire Protection Plans (FP): Drawings 111-FP101 through 111-FP111, 123-FP101, 123-FD101, 06-FP101 through 06-FP103.
• Plumbing Plans (PP): Drawings 03-PP101, 04-PP102, 05-PP101, 05-PP102, 06-PP101, 06-PP102, 06-PP103.
• Plumbing Demolition Plans (PD): Drawings 123-FD101, 06-PD101, 06-PD102, 06-PD103.
• Plumbing Site Plan (PS): Drawing PS-101.
• Plumbing Details (P-001, P-002): Includes abbreviations, symbols, notes, and specific connection details.
• Key Notes: Each drawing includes specific notes regarding the scope of work, such as fire sprinkler work areas, piping reconfiguration, and condensate drain routing.

These drawings are critical for bidders to understand the scope of work for the EHRM Infrastructure Upgrades project. They provide detailed information on the existing conditions, proposed fire protection system modifications, and plumbing installations/demolitions across multiple buildings. Bidders must review these plans to accurately estimate costs, develop construction methodologies, and ensure compliance with all specified requirements.

Forms / Attachments / Pricing Sheets

This document contains architectural and engineering drawings related to the EHRM Infrastructure Upgrades project at the Milwaukee VA Medical Center. The drawings detail plumbing plans and plumbing demolition plans for various buildings (07, 20, 43, 70, 97, 102, 107, 108, 109, 111).

• Building 07: Basement plan - Plumbing (07-PP101)
• Building 20: Second Floor plan - Plumbing (20-PP102)
• Building 43: Level 01 and Level 02 plans - Plumbing Demolition (43-PD101, 43-PD102) and Plumbing Floor Plans (43-PP101, 43-PP102)
• Building 70: Level 01 plans - Plumbing Demolition (70-PD101) and Plumbing Floor Plan (70-PP101)
• Building 97: First Floor plan - Plumbing (97-PP101)
• Building 102: Basement and Level 01 plans - Plumbing Floor Plans (102-PP101, 102-PP102, 102-PP103)
• Building 107: Mezzanine plan - Plumbing (107-PP101)
• Building 108: Second Floor plan - Plumbing (108-PP101)
• Building 109: Basement plan - Plumbing (109-PP101)
• Building 111: Basement through Level 10 plans - Plumbing Demolition (111-PD101 through 111-PD112) and associated enlarged plans.

These drawings are critical for bidders to understand the existing plumbing infrastructure, proposed demolition work, and new plumbing installations across multiple buildings. They provide detailed layouts, key notes, and specific instructions for plumbing systems, which are essential for accurate bidding, material estimation, and execution planning for the EHRM Infrastructure Upgrades project.

Forms / Attachments / Pricing Sheets

This document contains detailed architectural and mechanical drawings for the EHRM Infrastructure Upgrades project at the Milwaukee VA Medical Center. It includes plumbing floor plans, mechanical demolition plans, and mechanical details and legends across multiple buildings (102, 107, 108, 109, 111, 112, 113, 123, and Building 3, 4, 6, 7, 20). The drawings specify the layout of plumbing systems, including sanitary, vent, and condensate drains, as well as mechanical equipment, symbols, and demolition areas.

• Plumbing Floor Plans: Detailed layouts for various levels of multiple buildings, showing pipe routing for sanitary, vent, and condensate drainage.
• Mechanical Demolition Plans: Outlines areas and systems to be demolished, including ductwork and piping.
• Mechanical Details and Legends: Provides symbols, abbreviations, and specific installation details for mechanical systems, including pipe supports, penetrations, and ductwork.
• HVAC Design Data: Includes outdoor and indoor design conditions, and schedules for split system air conditioners.
• Points List and Controls Schematics: Details for building automation system (BAS) integration, including points lists and control sequences for HVAC units.

These drawings are critical for bidders to understand the existing conditions, the scope of work for plumbing and mechanical systems, and the specific requirements for installation, demolition, and integration with existing systems. They provide the necessary visual information to accurately estimate costs and plan execution for the project.

Forms / Attachments / Pricing Sheets

This document contains architectural and engineering drawings, specifically focusing on mechanical plans and mechanical demolition plans for various buildings within the EHRM Infrastructure Upgrades project at Milwaukee, WI. These drawings are essential for understanding the existing conditions, proposed changes, and scope of work related to mechanical systems.

• Mechanical Plans (MH): Detail the layout and specifications of mechanical systems, including HVAC, refrigerant piping, and temperature control systems for different buildings and floors.
• Mechanical Demolition Plans (MD): Illustrate areas and components of mechanical systems that are to be removed, including ductwork, piping, grilles, and equipment.
• Building Coverage: Plans are provided for Buildings 4, 5, 6, 7, 20, 43, 70, 97, 102, 107, 108, and 109.
• Key Notes: Provide specific instructions and information related to temperature control, clearance requirements for equipment, refrigerant pipe routing, and details on what existing systems are to remain or be demolished.

These drawings are critical for bidders to:

• Accurately assess the scope of work for mechanical system upgrades and demolitions.
• Understand the existing conditions and the extent of proposed modifications.
• Develop precise cost estimates and project timelines.
• Identify any specific requirements or constraints related to mechanical system installations and removals in each building.

Form / Attachment / Pricing Sheet

This document contains architectural and engineering drawings related to the "EHRM INFRASTRUCTURE UPGRADES - MILWAUKEE, WI" project, specifically focusing on mechanical demolition and mechanical plans for Building 111. It provides detailed floor plans and enlarged views of specific rooms across multiple levels (Basement through Level 10).

• Mechanical Demolition Plans (111-MD series): Detail areas and components to be demolished, including ductwork, grilles, piping, and specific equipment within telecommunication rooms and other areas.
• Mechanical Plans (111-MH series): Illustrate the layout of mechanical systems, including refrigerant piping, ductwork, and condenser unit locations.
• Key Notes: Provide specific instructions and information regarding demolition scope, existing systems to remain, and requirements for new installations.
• Room-Specific Details: Enlarged plans for telecommunication rooms (e.g., B0622, B0610E, 1180, 1456, 2235, 2428, 2557, 3308, 4315, 5311, 6410A, 7412, 8409, 9409, 10409) show detailed mechanical work within these areas.

These drawings are critical for bidders to understand the scope of work related to mechanical systems, including what needs to be removed and what new installations are planned. They provide the necessary visual information to accurately estimate costs, plan execution, and identify potential site challenges for the EHRM Infrastructure Upgrades project at Building 111.

Form / Attachment / Pricing Sheet

This document contains architectural and engineering drawings related to the EHRM Infrastructure Upgrades project at 5000 W. National Avenue, Milwaukee, WI. The drawings detail mechanical and electrical demolition and new work across various buildings (112, 123, 3, 4, 5, 6, 7, 20, 43, 70, 97, 102, 107, 108, 109, 111) and floors.

• Mechanical Demolition Drawings: Show areas where mechanical systems are to be demolished.
• Electrical Demolition Drawings: Detail existing electrical systems to be removed, including lighting, power outlets, panels, conduits, and associated wiring.
• Electrical New Work Drawings: Outline the scope of new electrical installations, including panel upgrades, new feeders, circuiting, lighting, power connections for HVAC, and fire alarm devices.
• Site Plan: Provides an overview of the project location and building numbers.
• One-Line Diagrams: Illustrate the electrical system architecture for specific buildings.
• Legends and Abbreviations: Define symbols, abbreviations, and naming conventions used throughout the drawings.
• General Notes and Keynotes: Provide specific instructions and requirements for demolition and new electrical work.

These drawings are critical for bidders to understand the existing conditions, the scope of work for both demolition and new installations, and the specific requirements for electrical and mechanical systems across multiple buildings. They are essential for accurate bidding and project execution.

Form / Attachment / Pricing Sheet

This document contains detailed electrical panel schedules for various branch panels within the EHRM Infrastructure Upgrades project. These schedules provide critical information for understanding the power distribution and load assignments for each panel.

• Branch Panel Identification: Each schedule clearly identifies the panel name (e.g., EUL-TR-11-1 (NEW)).
• Circuit Details: Lists individual circuits with their description, trip rating, poles, connected load, demand factor, estimated demand, and total load.
• Panel Totals: Summarizes the total connected load, estimated demand, and total amps for each panel.
• Notes: Includes important information regarding enclosure type, mounting, wiring, supply source, voltage, and AIC rating.

These schedules are essential for bidders to understand the electrical load requirements and distribution for the project. They inform decisions about equipment compatibility, installation complexity, and potential power needs. Bidders should review these schedules to ensure their proposed solutions align with the project's electrical infrastructure.

Form / Attachment / Pricing Sheet

This document contains drawings and plans related to the EHRM Infrastructure Upgrades - Milwaukee, WI project, specifically focusing on technology infrastructure. It includes site plans, demolition plans, and overall plans for various buildings (03, 04, 05, 06, 07, 20, 43, and 70).

• Technology Site Plan (T1003): Details pathways and infrastructure for the technology site.
• Building Demolition Plans (e.g., 03-TD101, 04-TD100, 05-TD101, 06-TD100A, 07-TD100, 20-TD101, 43-TD101, 70-TD100A): Illustrate areas for demolition of existing technology infrastructure within specific buildings and areas.
• Building Technology Plans (e.g., 03-TN101, 04-TN101, 05-TN101, 06-TN100, 07-TN100, 20-TN101, 43-TN101, 70-TN100): Show the planned technology infrastructure, including pathways, telecommunication rooms, and outlet locations.
• Overall Plans (e.g., 06-TN100, 70-TN100): Provide a consolidated view of the technology infrastructure across multiple buildings or areas.

These drawings are critical for bidders to understand the existing conditions, the scope of demolition required, and the proposed technology infrastructure layout. They provide detailed information on conduit pathways, telecommunication room locations, and the distribution of technology points within various buildings. This information is essential for accurate bidding, proposal development, and execution of the project.

Form / Attachment / Pricing Sheet

This document contains detailed floor plans for Building 70, including overall plans and specific area plans for the first and second floors. It also includes demolition plans for various buildings (97, 102, 107, 108, 109, 111) across multiple floors (basement, first, second, sub-basement, mezzanine).

• Building 70 Plans: First and second-floor overall and area-specific technology plans showing room layouts, data drop locations, and telecom room designations.
• Demolition Plans: Detailed plans for multiple buildings indicating areas for demolition, including network cabling removal, existing equipment, and specific room/area designations (e.g., "Area A", "Basement", "First Floor").
• Notes: General notes on all demolition plan sheets specify that existing wireless access points, surveillance cameras, nurse call, and security equipment shall remain. Scope includes cable replacement only. Bidders are cautioned that existing work area outlet locations may not be exact.

These drawings are critical for bidders to understand the existing conditions, the scope of work for technology infrastructure upgrades and demolition, and the specific locations of work within various buildings. They provide the necessary spatial information to plan for installation, removal, and coordination efforts. The notes highlight important considerations regarding existing equipment and the precision of outlet locations.

Form / Attachment / Pricing Sheet

This document, "Project Information Sheet for Contractors," is a form that potential bidders must complete and submit as part of their proposal. It requires detailed information about past projects to demonstrate the offeror's experience.

• Offeror Information: Name, role (prime/subcontractor).
• Contract Details: Contract number, project number, NAICS code, project title, location, contracting officer/POC, owner's project manager/POC.
• Contract Performance: Type of contract, award amount, final amount, award date, schedule dates (notice to proceed, original completion, actual completion).
• Project Specifics: Number and reason for change orders, OSHA citations (if applicable).
• Subcontractors: List of major subcontractors with POC and phone numbers.
• Narrative: Detailed description of work performed and its relevance to the current opportunity.

Bidders must provide a separate, completed form for each contract/project submitted to demonstrate their experience. The information requested, particularly the narrative describing performance and relevance, is crucial for the government to evaluate the offeror's qualifications and past performance. The NAICS code (236220 - Commercial and Institutional Building Construction) indicates the type of construction experience being sought.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire (PPQ) intended for use by contractors to gather feedback on their past performance from clients. The completed PPQ is to be incorporated into the offeror's proposal submission and counts towards the proposal's page limitation.

Section 1: Contract Information (Contractor to complete)

• Contractor Information (Name, Address, POC, Contact Info)
• Work Performed As (Prime/Subcontractor, % of Project)
• Contract Information (Title, Number, Type, Location, Dates, Price - Original and Final)
• Project Description (Scope, Relevance to current submission)

Section 2: Evaluator Information (Client to complete)

• Verification of Section 1 information.
• Evaluation of contractor's ability to perform work.
• Specific ratings for Quality, Schedule/Timeliness, Communication, Management/Personnel/Labor, Cost/Financial Management, and Subcontract Management.
• Overall summary and recommendation to hire/work with the firm again.
• Adjectival ratings definitions (Outstanding, Above Average, Satisfactory, Unsatisfactory, Not Applicable).

Offerors must provide this questionnaire to their clients to complete. The completed PPQ is a required part of the proposal submission and contributes to the overall page count. It serves as a mechanism for the government (VHA-PCAC) to assess the offeror's past performance, which is a critical evaluation factor. Bidders need to ensure timely completion and submission by their clients to meet proposal deadlines.

Solicitation / RFP / RFQ

This is a solicitation for a single firm-fixed-price contract for EHRM Infrastructure Upgrades Tier 1 Construction project 695-21-700 at the Clement J. Zablocki VA Medical Center (VAMC) in Milwaukee, WI. The Department of Veterans Affairs (VA), Veterans Health Administration (VHA), Program Contracting Activity Central (PCAC) is seeking proposals.

The project includes infrastructure improvements such as:

• Electrical upgrades (panels, power - normal and emergency)
• Bonding and UPS systems
• Building Management System interfaces
• HVAC assessment, upgrades, reconfiguration, expansion, and renovation
• Communication infrastructure (data outlets, patch panels, Cat 6A cabling)
• Physical security upgrades
• Fiber infrastructure backbone assessment and upgrades (campus-wide, inter-building)
• Diversified path installation to datacenter for WAN
• Hazardous material abatement

Specific buildings involved include: 3, 4, 5, 6, 7, 20, 43, 70, 97, 102, 107, 108, 109, 111, 112, 113, 115, 123, 144, 146, 147, 148, 150, 151, 152, and the site.

• Contract Type: Firm-Fixed-Price

• Period of Performance: Approximately 1,460 calendar days from Notice to Proceed (NTP).

• Magnitude of Construction: Between $50,000,000 and $100,000,000 (on the lower end of this range).

• The solicitation will be issued as a Request for Proposals (RFP) in accordance with FAR Part 15.

• Evaluation will be conducted using tradeoff procedures as detailed in the solicitation.

• The solicitation is anticipated to be issued by early-mid January 2026.

• All questions must be submitted in writing via email to bailey.donato@va.gov. Telephone calls will not be accepted.

• This solicitation is a total Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside.

• Offers from other than SDVOSB concerns will not be considered.

• Applicable NAICS Code: 236220 with a size standard of $45.0 million.

• This notice is not a request for competitive offers.

• Contracting Office Address: Department of Veterans Affairs, Program Contracting Activity Central, 6100 Oak Tree Blvd, Suite 490, Independence OH 44131.

• Point of Contact: Bailey Donato, Contract Specialist (bailey.donato@va.gov).