Z--KALA-REPLACE HVAC AND HUMIDITY CONTROL SYSTEM IN T

Form / Attachment / Pricing Sheet

This document is an electrical plan showing preliminary preferred equipment locations for the existing service/distribution within the Kalaupapa National Historical Park. It serves as a visual reference for potential equipment placement.

• Conditioned Spaces / Zones: Outlines specific areas within the building designated for climate control.
• Preliminary Locations for FCU / Mini Split Units: Indicates proposed sites for fan coil units or mini-split systems.
• Preliminary Location for ACU / Condensers: Shows potential placement for air conditioning units and their condensers.
• Electrical Plan Details: Includes existing service/distribution information, panelboard locations, and notes regarding new electrical work.

This plan provides crucial spatial information for bidders to understand the existing electrical infrastructure and the proposed locations for HVAC equipment. This is essential for developing accurate proposals related to electrical, mechanical, or renovation work, as it impacts installation planning, material requirements, and potential site logistics.

Solicitation / RFP / RFQ

This is a competitive 100% Small Business Set-Aside Invitation for Bid (IFB) for the replacement of the HVAC and Humidity Control System in the Parks Curatorial Facility at Kalaupapa National Historical Park (KALA). The North American Industry Classification System (NAICS) code is 238220 with a size standard of $19M. The government anticipates awarding a firm-fixed-price contract.

• Replacement of the HVAC and Humidity Control System in the Parks Curatorial Facility.

• All work must be in strict compliance with the specifications.

• Contract type: Firm-fixed-price.

• Period of Performance: The contractor shall begin performance within 7 calendar days after receiving notice to proceed and complete the project within 150 calendar days after receiving notice to proceed.

• Submission Method: Electronic bids must be submitted to PWR_Sealed_Bids@nps.gov. The email subject line must be "140P8226B0004 Replace HVAC in Curatorial at Kalaupapa National Historical Park (KALA)". The bid package should be a single PDF file, with a size limit of 34 MB.

• Bid Opening: Electronic bid opening only. Information will be provided in an amendment. The bid opening will occur approximately 24 hours after the bid due date/time.

• Questions Deadline: Written questions must be received no later than 12:00 PM Local Time (Hawaii) on April 20, 2026.

• Site Visit: A site visit is encouraged but not mandatory. Date, time, and location will be posted in an amendment. Contractors must pre-register via email to Michael_Davidson@ios.doi.gov.

• This acquisition is a 100% Small Business Set-Aside.

• Offerors must acknowledge all solicitation amendments.

• Bidders must include their SAM registered UIED number in Block 14 of the SF1442.

• Original signatures of individuals authorized to sign for the company are required.

• Bid Guarantees must be provided with the bid package.

• A detailed breakdown of the bidder's proposal price is not requested at this time but may be requested during pre-award.

Form / Attachment / Pricing Sheet

This document appears to be a quote or a detailed specification sheet for a transformer, likely provided in response to a Request for Quotation (RFQ). It outlines the specific configuration, components, and pricing for a padmount distribution transformer.

• Transformer Specifications: Details include KVA rating (167 KVA), primary and secondary voltages (4160GRDY/2400 and 240/120), tap settings, and BIL rating (60BIL 1BU).
• Physical Dimensions: Provides dimensions such as width, height, depth, and cable opening size.
• Components: Lists various parts and their specifications, including bushings, switchgear, nameplates, valves, hardware, and tank/door materials (304L Stainless Steel).
• Fluid Type: Specifies FR3 fluid and standard TX mineral oil.
• Options: Includes a list of optional features and configurations.
• Pricing: Provides unit and extended prices for the transformer and associated options.

This document is crucial for bidders who are considering this opportunity. It provides the detailed technical specifications and pricing information necessary to understand the exact product being offered, compare it against their capabilities, and prepare a competitive bid. It clarifies the government's requirements for the transformer, including its performance, physical attributes, and material composition.

Form / Attachment / Pricing Sheet

This document contains photographs of a curatorial facility, including exterior and interior views. It serves as an attachment to a solicitation or opportunity record, providing visual context for potential bidders regarding the physical space where services may be performed or assets are stored.

The document comprises multiple photographic images depicting:

• Exterior views of the building structure, walls, rooflines, and surrounding grounds.
• Interior views of various rooms such as receiving areas, administrative spaces, office spaces, specialized archival or collection storage rooms, and mechanical rooms.
• Details of existing electrical service and distribution components, including panels, transformers, generators, and circuit breaker configurations.
• Visuals of shelving, cabinets, desks, equipment, and stored items.

These photographs are crucial for bidders to visually assess the current state of the curatorial facility. They aid in understanding the scope of work required, identifying potential challenges, evaluating the suitability of capabilities for the specific location, and accurately estimating costs for proposed renovations, upgrades, or services. Images of storage areas and electrical panels may inform requirements related to facility management, equipment, or environmental controls.

Form / Attachment / Pricing Sheet

This document is a Standard Form 25A, Payment Bond, used to protect persons supplying labor and material for a contract. It is required under 40 USC Chapter 31, Subchapter III, Bonds.

• Principal: Requires the full legal name and business address of the entity undertaking the contract.
• Surety(ies): Requires the name(s) and business address(es) of the surety or sureties providing the bond.
• Penal Sum Of Bond: Specifies the monetary limit of the bond.
• Contract Date & Number: Identifies the contract to which the bond applies.
• Obligation: Outlines the conditions under which the bond is valid, primarily ensuring prompt payment for labor and materials.
• Execution: Sections for signatures, typed names, titles, and seals of the Principal and Surety(ies).

This form is a required attachment for certain government contracts. Bidders may need to complete and submit this payment bond, or ensure their subcontractors have provided one, as part of their contractual obligations. It ensures that parties providing labor and materials to the principal contractor are paid.

Form / Attachment / Pricing Sheet

This document is Standard Form 25 (Rev. 10/2023), a Performance Bond. It is required for government contracts to ensure the Principal fulfills all contractual obligations and pays applicable taxes.

• Principal: Information about the contractor (legal name, business address, type of organization).
• Surety(ies): Information about the surety company or companies providing the bond (name, address, state of incorporation, liability limit).
• Penal Sum of Bond: The maximum amount the surety is liable for.
• Contract Date & Number: Details of the contract the bond is associated with.
• Obligation: Outlines the conditions under which the bond is valid, primarily the Principal's performance of the contract and payment of taxes.
• Execution: Spaces for signatures, names, titles, and corporate seals of the Principal and Surety(ies).
• Bond Premium: Fields for Rate Per Thousand and Total.

This form is a required attachment for certain government contracts. Bidders will need to understand the requirements for obtaining and submitting this performance bond, including identifying an approved surety and ensuring the bond amount (penal sum) is sufficient. The instructions provide guidance on completing the form, the role of co-sureties, and requirements for individual sureties.

Form / Attachment / Pricing Sheet

This document is a Davis-Bacon Act Wage Determination (WD) for the state of Hawaii, specifically for construction projects categorized as Building, Heavy, Highway, and Residential. It outlines the prevailing wage rates for various labor classifications applicable to federal or federally funded construction contracts in the specified region.

• General Decision Number: HI20260001
• Superseded Decision Number: HI20250001
• State: Hawaii
• Construction Types: Building, Heavy, Highway, Residential
• Counties: Hawaii Statewide
• Modification Number: 1
• Last Revised Date: January 16, 2026
• Labor Classifications and Prevailing Wage Rates: Detailed lists of various trades and their corresponding hourly wage rates, including specific job functions and group classifications (e.g., Asbestos Workers/Insulator, Boilermaker, Bricklayer, Carpenters, Electricians, Elevator Mechanic, Divers, Power Equipment Operators, Ironworkers, Laborers, Painters, Plumbers, Roofers, Sheet metal workers, etc.).
• Executive Orders: Notes on Executive Order 13706 (Establishing Paid Sick Leave for Federal Contractors) and Executive Order 13658 (Establishing a Minimum Wage for Federal Contractors) and their applicability.

This wage determination is crucial for any bidder on federal construction contracts in Hawaii. It establishes the minimum wage rates that must be paid to laborers and mechanics employed on the contract. Bidders must ensure their proposals and labor costs accurately reflect these prevailing wage rates to ensure compliance with federal regulations. Failure to adhere to these rates can lead to contract violations and penalties.

Form / Attachment / Pricing Sheet

This document is a Contract Price Schedule for Solicitation Number 140P8226B0004, related to the "REPLACE HVAC AND HUMIDITY CONTROL SYSTEM IN THE PARKS CURATORIAL FACILITY" project at Kalaupapa National Historical Park. It outlines the pricing structure required for bidder submissions.

• Contract Line-Item Number (CLIN): 00010
• Contract Line-Item Title: REPLACE HVAC AND HUMIDITY CONTROL SYSTEM IN THE PARKS CURATORIAL FACILITY
• Quantity: 1
• Unit of Measure: LS (Lump Sum)
• Bidders are required to provide a total price for CLIN 00010.
• For lump-sum items, only the total price should be submitted.
• Extended prices should be rounded to whole dollars.
• In case of calculation errors, the unit price governs; in case of summation errors, the total of corrected amounts governs.

This pricing schedule is critical for bidders to understand the required format for submitting their financial offer for the HVAC replacement project. Bidders must provide a total price for the specified lump-sum CLIN. Failure to submit a conforming offer with pricing for base line items may result in the proposal being deemed unacceptable. The document also references FAR Clause 52.217-5, Evaluation of Options, which bidders should review.

Construction Specifications

This document outlines the construction specifications for replacing the HVAC and humidity control system in the curatorial facility at Kalaupapa National Historical Park, Molokai, HI. The project involves furnishing and installing new mini-split air-conditioning systems and delivering four new commercial dehumidifier units. The existing air-conditioning system is beyond its service life and requires replacement to maintain specific temperature (55-68°F) and relative humidity (40-55%) levels crucial for preserving museum collections.

• Installation of new mini-split air-conditioning systems (Fan Coil Units and Air Cooled Condensing Units) as detailed in equipment schedules.

• Furnishing and delivery of four commercial dehumidifier units (PERFECT AIRE, Portable Dehumidifier, Model 3PACD250).

• Installation of concrete pads for Air Cooled Condensing Units (ACCU), with an option for the park to complete this work as a contract deduct.

• Shop drawings are required for the work.

• All work must be installed per approved shop drawings and manufacturer's instructions.

• Existing centralized air-conditioning systems will be disconnected by the park; the contractor is responsible for demolition, removal, and disposal of existing systems.

• The project will be constructed under a single prime contract.

• Payment will be made at the contract lump sum price for the main CLIN (00010).

• Option A (Deduct) is available if the park completes earthwork and concrete pads prior to contractor mobilization.

• Shop drawings are required.

• Submittal procedures are detailed in Section 01 33 23.

• Not specified in this document.

• The project location is remote, with material mobilization requiring small aircraft or an annual barge.

• Government-furnished items include potential concrete pads, heavy equipment, ladders, vehicles, barge delivery space, and housing.

• The park will handle disposal of refuse and existing HVAC systems.

• The document references numerous other specification sections (Divisions 01, 03, 09, 23, 26) for detailed requirements.

Form / Attachment / Pricing Sheet

This document provides detailed specifications for the MXZ-SM60NL, a 60,000 BTU/H Heat Pump Outdoor Unit. It includes technical data, performance metrics, and accessory information.

• General Features: Highlights compatibility with M- and P-Series and CITY MULTI® indoor units, various protection mechanisms (overcurrent, thermal, voltage, high pressure), INVERTER-driven compressor, quiet operation, seacoast protection, and thermal differential.
• Specifications Table: Details performance metrics for cooling and heating at various temperatures (95°F, 47°F, 17°F, 5°F, -13°F), including maximum/rated/minimum capacity, power input, power factor, SEER2, EER2, HSPF2, and COP.
• Notes: Provides specific conditions for the listed specifications and application restrictions.
• Outdoor Unit Accessories: Lists available accessories for the MXZ-SM60NL, such as control wires, branch boxes, mounting pads, and drain pans.
• Dimensions: Includes detailed diagrams and measurements for the outdoor unit.

This document is crucial for bidders to understand the technical capabilities and physical requirements of the outdoor unit. It allows them to assess compatibility with proposed indoor units, verify performance against project requirements, and identify necessary accessories and installation considerations. The detailed specifications are essential for accurate system design and proposal development.

Form / Attachment / Pricing Sheet

This document is an aerial site plan for the KALA (Kalaupapa) area, providing a visual overview of the location. It is intended to help bidders understand the geographical context of the opportunity.

• The map displays various roads, buildings, and landmarks within the Kalaupapa area.
• Key labeled features include "Kalaupapa Dock" and a "Curatorial Facility" highlighted with a red outline.
• A legend indicates "APE" (Area of Potential Effect) and "Feature 1" with a pin icon, and "Kalaupapa" with a building icon.
• Roads such as Damien Rd, Kilohana St, Kamehameha St, Beretania St, Mission St, Puahi St, Staff St, and Staff Loop are visible.

This site plan provides essential spatial information for understanding the physical environment related to the opportunity. Bidders can use this to visualize the location of facilities, access routes, and the general layout of the area, which may be relevant for planning, logistics, or understanding site-specific requirements.

Form / Attachment / Pricing Sheet

This document contains construction drawings for the "Curatorial Storage Building, Fire Suppression Systems" at Kalaupapa National Historical Park. It includes various plans, elevations, sections, details, and schedules related to the building's construction.

• Cover Sheet (Sheet KALA COVER 211-S): General information about the project, location, drawing number, and park details.
• General Notes & Construction Notes (Sheet C1): Outlines important considerations for contractors, including dimension verification, incidental work, utility line locations, safety responsibilities, excavation, backfill, restoration, and archaeological artifact discovery.
• Site Plans (Sheets C2-C7): Detail the layout of waterlines, fire lines, and site utilities for various areas including Bayview Units, McVeigh Units, and the Curatorial Building.
• Fire Sprinkler & Fire Department Connection Profiles (Sheets C8-C14): Show the elevations and profiles for fire sprinkler systems and fire department connections for different buildings and options.
• Details (Sheets C15-C18, S1.1-S1.6, S2.12-S2.17, E1.1-E1.4, E2.1, E3.1-E3.5, M-1-M-6, M-18): Provide specific construction details for various elements such as valve boxes, concrete work, steel connections, wood framing, fire sprinkler systems, plumbing, electrical, and site utilities.
• Schedules (Various Sheets): Include schedules for doors, windows, equipment (fan coil units, condensing units, fans), panelboards, and materials.
• Elevations & Sections (Various Sheets): Show exterior elevations and various building cross-sections and wall sections.
• Roof Framing Plan & Details (Sheet S1.7): Details the pre-engineered wood roof trusses and their load criteria.
• Utility Plans (Various Sheets): Illustrate the layout of plumbing, fire protection, HVAC, and electrical systems.

These drawings are critical for any bidder intending to construct or perform work related to the Curatorial Storage Building and associated fire suppression systems at Kalaupapa National Historical Park. They provide the detailed specifications and layouts required for accurate bidding and execution of the project. Bidders must carefully review all sheets to understand the scope of work, materials, and installation requirements.

Form / Attachment / Pricing Sheet

This document is a set of architectural and engineering drawings for the "Complete Curatorial Facility to Meet Collection Management Standard and Provide Safe Public Access" project at Kalaupapa National Historical Park. It details the proposed renovations and new construction for the facility.

• Sheet 1 (Cover Sheet): Provides an overview of the project, park location, drawing index, and professional certifications.
• Sheet A1 (Site Plan, Abbreviations & Symbols): Shows the site plan, defines abbreviations and symbols used throughout the drawings.
• Sheet A2 (Floor Plan, Reflected Ceiling Plan, Door Types & Door Schedule): Details the layout of the facility, including room configurations, ceiling plans, and specifications for doors.
• Sheet A3 (Roof Plan & Detail): Outlines the roof design and includes specific details for roof penetrations and flashing.
• Sheet A4 (Building Cross Sections, Typical Wall Section, Room Finish Schedule, Material Index & Details): Provides detailed cross-sections of the building, wall construction, room finishes, and material specifications.
• Sheet M1 (Equipment Schedules, General Notes, Fire Protection Notes, and Mechanical Legend): Contains schedules for mechanical equipment, general project notes, fire protection requirements, and a legend for mechanical symbols.
• Sheet M2 (Plumbing Floor Plans): Illustrates the plumbing layout for the facility.
• Sheet M3 (Fire Protection Plan): Details the fire sprinkler system layout.
• Sheet M4 (A/C & V Floor Plan): Shows the air conditioning and ventilation system layout.
• Sheet M5 (A/C & V Detail Floor Plan and Schematics): Provides detailed plans and schematics for the HVAC system.
• Sheet M6 (Piping Diagrams): Illustrates sanitary and water piping diagrams.
• Sheet M7 (Details): Contains various construction details for mechanical and plumbing systems.
• Sheet E1 (Notes/Symbols/Abbreviations): Lists electrical notes, symbols, and abbreviations.
• Sheet E2 (Electrical Plan - Site/Location/General Work Scope): Shows the overall site and the scope of electrical work.
• Sheet E3 (Electrical Plan - Existing Service/Distribution): Details the existing electrical service and distribution system.
• Sheet E4 (One-Line Diagram/PNLBD Schedules): Provides a one-line diagram of the electrical system and panelboard schedules.
• Sheet E5 (Electrical Plan - New Work): Outlines the new electrical work, including power and lighting.

These drawings are critical for any bidder intending to propose on the construction or renovation of this curatorial facility. They provide the detailed specifications, layouts, and requirements for all architectural, structural, mechanical, plumbing, and electrical aspects of the project. Bidders must thoroughly review these documents to understand the scope of work, materials, and installation methods required.

Construction Specifications

This document contains the construction specifications for the "Replace HVAC and Humidity Control System in the Park's Curatorial Facility" project at Kalaupapa National Historical Park, Moloka'i, HI. It details the requirements for replacing the existing air-conditioning system and installing new mini-split air-conditioning systems and commercial dehumidifiers. The specifications cover general requirements, concrete work, finishes, heating, ventilating, and air conditioning systems, and electrical work.

• HVAC System Replacement: Installation of new mini-split air-conditioning systems (Fan Coil Units and Air Cooled Condensing Units) with specified models and capacities.

• Dehumidifiers: Furnishing and delivery of four new commercial dehumidifier units.

• Temperature and Humidity Control: Maintaining temperature between 55-68 degrees Fahrenheit (+/- 5 degrees) and relative humidity between 40-55% (+/- 5%) in museum collection storage rooms.

• Concrete Pads: Installation of reinforced concrete pads for Air Cooled Condensing Units.

• Electrical Work: Includes low-voltage power conductors and cables, grounding and bonding, conduits, boxes, covers, identification, and enclosed switches/circuit breakers.

• Materials: Specifies materials for concrete, finishes, HVAC equipment, insulation, electrical components, and painting.

• PMIS No.: 339997

• Project Location: Curatorial Facility, Kalaupapa National Historical Park (KALA), Molokai.

• Contract Type: Not explicitly stated, but implies a construction contract.

• Shop Drawings: Required for HVAC equipment, electrical layout, and refrigerant/condensate lines.

• Submittals: Includes product data, design mixtures, material certificates, shop drawings, and quality control plans.

• Quality Control: Contractor is responsible for quality assurance and control, including daily reports, testing, and inspections.

• Not specified in this document.

• The project is located in a remote area with specific logistical considerations for material delivery.

• The National Park Service (NPS) will manage demolition, removal, and disposal of existing air-conditioning systems.

• Government-furnished items may include concrete pads (if Option A deduct is exercised), heavy equipment, ladders, vehicles, and barge delivery space.