Z2DA--549-21-700 EHRM Infrastructure Upgrades Construction Dallas VAMC

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the electrical design and construction requirements for the Electronic Health Records Modernization (OEHRM) Program at the VA Medical Center of North Texas Healthcare System in Dallas. The goal is to improve healthcare delivery, patient safety, and quality of care through advanced health record technologies.

• Affected Areas: One hundred twenty-six IT spaces across multiple buildings, including three buildings at the Herzog Campus.

• Demolition: Removal of existing electrical circuits, lighting, power devices, and mechanical equipment where required.

• New Electrical Service: Provision of new dedicated electrical panels and rack-mounted power distribution units (PDUs) and uninterruptible power supply (UPS) units in Telecommunication Rooms (TRs).

• Modifications: Adjustments to electrical power and lighting in adjacent spaces affected by TR upgrades.

• Receptacles & Power: Installation of additional receptacles for TRs and power for new mechanical equipment.

• Grounding & Bonding: Installation of new primary and secondary bonding busbars, and bonding of all components within TRs to the building service grounding point. Compliance with TIA 607-D for telecommunications grounding.

• Lighting: Analysis and potential replacement of existing fluorescent lighting with LED retrofit lamps in TRs. Connection of all TR lighting to the critical branch of the Essential Electrical System (EES).

• Power Distribution: Provision of dedicated branch panelboards in each TR, sourced from the critical branch or emergency power backup where available. Redundant, dedicated circuits for telecommunication racks.

• Equipment: Installation of rack-mounted PDUs (with two inputs) and 5kW UPS units for each rack, providing a minimum of 10-minute run-time.

• Transformers: Indoor dry-type, step-down transformers to convert 480V to 208Y/120V, located in electrical rooms.

• Panelboards: New panelboards with main circuit breakers, 30% spare capacity, and copper bussing.

• Surge Protection: Type 2 Surge Protective Devices (SPD) on main electrical service and panelboards serving sensitive equipment.

• Labeling: Phenolic resin labels for electrical distribution equipment (white lettering on black for normal power, white on red for essential) and adhesive labels for wiring device cover plates.

• Lighting to meet VA standards for adequate, uniform illumination.

• Drivers for LED lighting to be a minimum of 85% efficient at full load, with power factor >95% and THD <20%.

• UPS units to provide a minimum of 10-minute run-time.

• Voltage drop limited to 2% for feeders and 3% for branch circuits (max 5% combined).

• Not explicitly stated in this document, but the project is located at the VA Medical Center of North Texas Healthcare System in Dallas.

• Compliance with VA Electrical Design Guide, VA Infrastructure Standard for Telecommunications Spaces, and various codes and standards (listed in the document, including NFPA 70, NFPA 110, IECC 2024, etc.).

• Electrical calculations for voltage drop, fault currents, and arc-flash.

• Protective device coordination study.

• Grounding and bonding to comply with TIA 607-D.

• Specific receptacle types (NEMA L21-20R, L21-30R) and circuit requirements (208V, 20A/30A/60A, three-phase) for rack-mounted equipment.

Other / Unclassified

This document outlines the phasing narrative for the EHRM Upgrades project in Dallas, TX (VA Project Number 549-21-700 (2302)). It details the planned sequence of work across three phases, focusing on the installation and extension of fiber optic cabling and related infrastructure.

This document is crucial for bidders as it provides a detailed breakdown of the project's phased approach. Understanding the sequence of work, including specific building targets and tasks within each phase, will be essential for:

• Project Planning: Estimating resources, timelines, and potential logistical challenges.
• Scope Understanding: Clarifying the order in which different areas and systems will be addressed.
• Coordination: Identifying dependencies and potential impacts on other trades or site activities.

Key details include:

• Phase 1: Focuses on establishing secondary ISP entrance facilities, installing fiber optic cabling to critical and essential buildings, and creating redundant A and B path fiber ring topology across campus.
• Phase 2: Involves work on ancillary (non-critical or essential) buildings, including demolition and horizontal cabling to edge devices, with a focus on completing one building at a time.
• Phase 3: Concentrates on installing fiber optic cabling for redundant A and B path fiber ring topology within critical and essential buildings, including demolition and horizontal cabling. It also specifies that horizontal cabling demolition will not occur until new edge devices are supported by new backbone infrastructure.
• Miscellaneous: Notes that "off" hours work may be scheduled and that Electronic Security Systems (ESS) work associated with TRs will be performed during TR construction.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the telecommunications infrastructure upgrade project at the Dallas VA Medical Center to support the new Electronic Health Record Modernization (EHRM) system.

• Infrastructure Upgrades: Upgrade facility fiber-optic cabling, including redundant fiber-optic cabling ring topology and secondary fiber-optic cabling runs for dual internet service providers.

• Telecommunication Rooms (TRs) & Enclosures (TEs): Design or remodel IT closets (TRs and TEs) to meet EHRM guidelines, including dedicated spaces for OIT equipment and maintaining operations in existing TRs for Non-OIT equipment.

• Ancillary Systems: Upgrade facility HVAC and electrical distribution systems as required for TR and TE locations.

• Security & Hazardous Materials: Provide a physical security assessment and upgrades, along with a hazardous material assessment and abatement plan.

• Building Scope: Includes numerous buildings on campus (listed as 1, 2, 2J, 3, 5, 6, 7, 8, 9, 11, 13, 43, 44, 45, 60, 68, 69, 70, 71, 72, 74, 75, 77, 79, 80, 81, 82, 87, TT46-TT55) and three buildings at Herzog Campus. Buildings 1, 2, 2J, 3, 6, 8, 43, 70, 74, 87 are critical; Buildings 60 and 72 are essential.

• Demolition: Remove abandoned or unnecessary TR and TE equipment. Remove existing work area outlets using less than Category-6A cabling and replace with Category-6A. Demolish spline type cable tray above ceilings.

• Building Telecommunications Systems: Install intra-building ISP backbone (24-strand OS1 single-mode fiber) and inter-building OSP backbone (24-strand OS2 single-mode fiber) for critical and essential buildings.

• TR Configuration: Equip new and renovated TRs with fire-rated backboards, channel racks, wire mesh cable tray, and a telecommunications ground bar (TGB). Install new voice and data outlets with Category-6A cabling.

• Equipment: Install new angled, high-density, 48-port Category-6A patch panels, cable runway, cable waterfalls, and vertical wire managers.

• Grounding and Bonding: Provide grounding and bonding in accordance with NEC, VA PG-18-10, and EIA/TIA 607 Standards.

• Adherence to specific codes and standards including ICC/A117.1, IBC 2021, IEBC 2021, NFPA 70-2023, NFPA 75-2020, NFPA 99-2021, NFPA 101-2021, VA OIT Infrastructure Standards (Version 3.1), VA Design Guide Templates, VA PG-18-10, VA PSRDM, and BICSI/EIA/TIA Standards.

• Cabling density for upgraded work area outlets shall be two (2) Category-6A cables, unless otherwise specified.

• Minimum raceway size for work area outlets is 1.25", with a maximum conduit fill of 40%.

• Minimum cable tray size is 12" wide with 4" high sidewalls, with a maximum fill of 40%.

• The project is for the Dallas VA Medical Center.

• Phasing plans are to be developed by the Contractor and approved by the VA to minimize disruption.

• Work may require night shifts and careful coordination due to the hospital environment.

• Critical nature of hospital circuits requires careful coordination and minimal disruption.

• Emergency egress must not be compromised.

• Contractor must be immediately responsive to service interruptions.

• Approval for shutdowns must be requested in writing a minimum of four weeks in advance.

• Existing TRs for FMS/BioMed services must remain operational.

Other / Unclassified

This document is a sign-in sheet for a site visit related to the EHRM Infrastructure Upgrades Construction project in Dallas. It records the names, companies, titles, email addresses, and phone numbers of individuals who attended the site visit on March 4, 2026, at 11:00 AM EST.

This document is relevant to potential bidders as it indicates which companies and individuals were present at the mandatory or optional site visit. This information can help bidders understand who else is interested in the opportunity and potentially identify competitors or partners. It also serves as a record of attendance for those who participated in the site visit, which may be a requirement for bidding on the opportunity.

Other / Unclassified

This document is an Architectural Narrative for the EHRM Upgrades project at the Dallas VA Medical Center. It details the project's objective to upgrade facility infrastructure to support the new Electronic Health Record Modernization (EHRM) system.

Key upgrades include:

• Upgrading and providing redundant fiber throughout buildings to IT closets.
• Providing redundant fiber mains.
• Designing or remodeling 126 IT closets to adhere to EHRM guidelines.
• Upgrading HVAC and electrical distribution systems for TR locations.
• Conducting physical security and hazardous material assessments.

The document lists specific buildings within the scope of work, noting additions and removals. It also outlines the site investigation conducted by the team to review existing conditions and proposed locations, including analysis of room names, floor areas, building functions, rack counts, cabling, adjacent spaces, electrical layouts, and data drop locations.

It further details construction phasing requirements, emphasizing minimal interruption to healthcare services and the need for contractor coordination with the VA COR. Finally, it lists numerous applicable codes, standards, and guidelines that will be followed throughout the project design.

This document provides crucial context for potential bidders regarding the scope of the EHRM infrastructure upgrades, the specific facilities involved, and the technical and regulatory requirements that will govern the project. It highlights the extensive nature of the IT closet upgrades, fiber optic work, and HVAC/electrical modifications, as well as the importance of adhering to a comprehensive list of VA and national standards. The information on construction phasing is also critical for understanding project execution constraints.

Other / Unclassified

This document is a site narrative providing supplemental information for the EHRM Dallas, Texas project, intended to guide pricing for the Final Bid Documents. It outlines the scope of work for infrastructure upgrades, based on VA conversations, surveys, GIS data, and site reconnaissance. Specific buildings within scope are listed, while others are excluded.

• Geotechnical: No subsurface exploration has been completed or is planned.
• Pavement: The contractor must replace sidewalks, curbs, and pavement damaged during new duct bank construction.
• Sanitary Sewer: No extensions are required.
• Storm Drainage: No extensions are required.
• General Utilities: No water, fire, or gas line extensions are required. New communication duct banks and manholes are required, as shown on sheet GS004-GS005. Technology plans should be referenced for additional information and potential rehabilitation of communication duct banks.
• Detention and Water Quality and Sediment Basin: No improvements are anticipated. The contractor is responsible for installing erosion control measures to manage sediment migration and tracking, as detailed on sheets GS006-GS008.

Other / Unclassified

This document is an Environmental Design Narrative prepared by Riverfront Safety & Health, LC (Riverfront) for the EHRM Infrastructure Upgrades Project at the North Texas VA Medical Center. It details the findings of limited mold, asbestos, and lead identification field surveys and abatement plans conducted to support the project's Final Bid Documents phase. The report outlines the methodologies used, including EPA/NESHAP/AHERA/OSHA standards, and identifies specific buildings and materials that may contain hazardous substances.

This document is highly relevant to potential bidders as it identifies potential hazardous materials (asbestos, lead-based paint) that may be encountered during the project. Key takeaways for bidders include:

• Asbestos: Suspect asbestos-containing materials were identified in numerous buildings, particularly those constructed before 1978. This includes floor tiles, mastic, soil debris, vapor barrier mastic, waterproofing, roofing materials, fire doors, and pipe insulation. Abatement by a licensed contractor will be required for any impacted materials or penetrations.
• Lead-Based Paint: Lead-based paint is presumed to exist on wooden building components, plaster walls/ceilings, and concrete in several buildings. While some of these materials may not be impacted by the project, any work disturbing them will require a licensed abatement contractor. Specific buildings with widespread lead issues are highlighted.
• Mold: No suspect visible mold growth was observed, though water damage was noted in one area. Mold is not anticipated to be a significant driver for this project.
• Scope Impact: The document specifies that certain identified hazardous materials (e.g., lead-based paint on specific components, some pipe insulation) should not be impacted by the project and must be protected. However, penetrations for utilities (fiber, HVAC, electrical, plumbing) will likely require abatement of asbestos-containing materials.
• Contractor Responsibility: Bidders should be aware that the OSHA Construction Industry Standard regarding airborne lead applies, and any demolition or renovation work involving lead-containing materials will require adherence to these regulations and potentially TCLP testing for disposal.

This narrative provides critical information for bidders to understand potential environmental hazards, associated abatement requirements, and the scope of work related to hazardous material management within the project.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the fire protection design narrative for upgrading facility fiber throughout buildings at the VA North Texas Healthcare System, Dallas (VHANTX) Medical Campus. The project aims to upgrade IT closets, provide redundant fiber runs, and ensure adequate fire protection measures are in place.

• Upgrade facility fiber throughout buildings to each IT closet.

• Provide a redundant fiber run throughout the facility to each IT closet.

• Provide redundant fiber mains to the demarcation room from the provider point.

• Design or remodel one hundred twenty-six IT closets.

• Upgrade facility HVAC and electrical distribution as required.

• Conduct physical security assessment and upgrades.

• Perform hazardous material abatement.

• Existing TR (telecommunication) rooms will be protected with a wet pipe sprinkler system unless the facility is not currently protected. TR rooms with exposed ceilings will use upright standard response type sprinklers.

• Modified sprinkler heads will have a maximum spacing of one per 130 square feet.

• Fire alarm and sprinkler systems will be renovated as necessary to facilitate modifications to TR layout, maintaining existing fire protection levels.

• Standard response fusible link sprinklers will be used to lessen the chance of accidental breakage while still providing structure protection.

• Sprinkler heads within TR rooms will be replaced with standard response fusible link sprinklers.

• If TR room layout is modified, fire alarm and sprinkler systems will be adjusted to maintain existing system coverage.

• The sprinkler system will be monitored by the building fire alarm system.

• Location: VA North Texas Healthcare System, Dallas (VHANTX) Medical Campus.

• Applicable Codes and Standards include NFPA 13 (2022), NFPA 72 (2022), NFPA 75 (2020), NFPA 101 (2021), VA Design Guide Infrastructure Standard for Telecommunications Spaces (v3.1), and VA Fire Protection Design Manual (9th Ed.).

• TR rooms are classified as Light Hazard (0.10 gpm/1,500 sq.ft.).

• Pipe material for 2-inch and smaller shall be steel, Schedule 40; 2 1/2-inch and greater may be steel, Schedule 10.

• Clean agent fire extinguishers shall be provided within 75 ft of the most remote point in each TR but cannot be located within the TR itself.

• Seismic bracing is not provided on existing system components and is not required in renovated areas for fire protection systems.

• Phasing will be outlined by the contractor to limit system outages.

• Commissioning will be subject to Section 0191 00 General Commissioning Requirements.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the mechanical design for the Electronic Health Record Modernization (EHRM) system at the Dallas VA Medical Center, focusing on HVAC systems for new and existing Telecommunications Rooms (TRs) and Telecommunication Enclosures.

• Design and activation of new HVAC equipment or upgrades to existing HVAC equipment for TRs.

• Evaluation of existing HVAC equipment in TRs to ensure it meets EHRM requirements.

• Replacement of HVAC equipment serving Telecom Rooms.

• Installation of new HVAC systems in TRs, typically involving one or two indoor units served by a condensing unit.

• Assessment of existing HVAC systems in Telecommunication Enclosures, with replacement if necessary.

• Selective demolition of existing fan coil units, ducts, air devices, radiators, unit heaters, and associated piping serving TRs.

• Removal of plumbing fixtures within TR spaces.

• New systems for TRs will be Variable Refrigerant Flow (VRF) DX cooling-only systems with ductless wall-mounted indoor units and associated outdoor condensing units.

• New systems for Telecommunication Enclosures will be VRF cooling-only systems with ductless wall-mounted indoor units and associated outdoor condensing units.

• Secondary drip trays will be installed under existing and new piping to protect racks and electrical equipment, connected to drain lines monitored by the Building Automation System (BAS).

• Humidification will be monitored but not controlled.

• New units will be tied to the existing BAS system.

• Testing, Adjusting, and Balancing (TAB) will be performed during commissioning.

• Pre-testing is not required.

• Not explicitly stated in this document, but the project is located at the Dallas VA Medical Center.

• Seismic mounting must comply with VA Publication H-18-8 Seismic Design Requirements.

• Equipment mounting requires spring or in-shear isolation restraints as per VA AHJ and local codes.

• Applicable codes and standards include IMC 2021, IPC 2021, NFPA 90A, 96, 99, 101 – 2021, ASHRAE 90.1 – 2019, ASHRAE 170 – 2021, VA HVAC Design Manual – 2021, PSRDM – June 2023, and VA ISTS 3.1 – 2021.

• Indoor design conditions include specific temperature and humidity ranges for TRs.

• Electrical power supply varies by building; no Central Plant utilities will be used.

• New unitary HVAC controls will integrate into the current ECC system platform.

Form / Attachment / Pricing Sheet

This document, titled "Security Design Narrative," outlines the design requirements for electronic safety and security systems as part of the Electronic Health Record Modernization (EHRM) Infrastructure Upgrades at the Dallas VA Medical Center. It details the scope of work, applicable codes and standards, and specific system requirements for bidders to understand the security infrastructure being procured.

• Project Overview: Upgrade facility infrastructure to support the EHRM system, including fiber-optic cabling, IT closet remodeling, HVAC/electrical upgrades, and physical security assessments.
• Scope of Work: Design and/or modification of equipment for securing, monitoring, and reporting activity within Telecommunication Rooms (TRs) and Telecommunication Enclosures (TEs) across numerous buildings. This includes Physical Access Control Systems (PACS), Intrusion Detection Systems (IDS), and Security Surveillance Television Systems (SSTV).
• Critical/Essential Buildings: Identifies specific buildings designated as critical or essential for security upgrades.
• Codes and Standards: Lists applicable codes and standards, including IBC, IEBC, NFPA, NEC, and VA-specific design manuals.
• Demolition: Requirements for the demolition of existing Electronic Security System (ESS) components.
• System Specifics: Details for PACS (dual authentication card readers, request to exit devices), IDS (door/window contacts), and SSTV (motion-activated cameras).
• Grounding and Bonding: Requirements for grounding and bonding in accordance with NEC and VA standards.

This document is crucial for bidders to understand the specific security design requirements, the extent of the work across multiple buildings, and the technical standards that must be met. It informs the scope of work for security system design, installation, and integration, directly impacting proposal development and cost estimation.

Other / Unclassified

This document, titled "Structural Narrative," provides an overview of the existing structural conditions of various buildings at the Dallas VA Medical Center and details proposed structural changes related to the Electronic Health Record Modernization (EHRM) project. It outlines the construction materials and configurations of the existing structures for multiple buildings (1, 2/2J, 3, 6, 43, 60, 70, 72, 74, 75, 77, 80, 82, and 1 Off-site).

This document is relevant to bidders as it describes the existing structural framework of the buildings where upgrades will occur. It specifies that most renovations are non-structural and do not significantly alter the load paths. The primary structural change involves the addition of rooftop units (RTUs), with details provided on their weight (311 lb, design load 350 lb) and footprint (3.34 sq ft). The document indicates that plans will include notes on existing framing conditions supporting these RTUs and typical details for bidding purposes based on RTU locations and quantities. Bidders should review this information to understand the structural implications of installing the new RTUs and to accurately prepare their bids.

Amendment / Modification

This amendment (0001) to solicitation 36C77625R0093, originally dated 02-18-2026, provides a copy of the Site Visit Sign-in Sheet and several narrative documents.

• Site Visit Sign-in Sheet
• Architecture Narrative
• Civil Narrative
• Electrical Narrative
• Environmental Narrative
• Fire Protection Narrative
• HVAC Narrative
• Phasing Narrative
• Security Design Narrative
• Structural Narrative
• Telecommunications Design Narrative

This amendment does not appear to alter the submission deadline or other requirements of the original solicitation, but bidders should review the attached documents for any information that may impact their proposals.

Form / Attachment / Pricing Sheet

This document is a table of contents for "VHA MASTER SPECIFICATIONS" related to "EHRM Infrastructure Upgrades" at the VA North Texas Health Care System in Dallas, TX. It outlines the various divisions and sections of the specifications, along with their corresponding dates.

• The document is structured by Division (e.g., Division 00 - Special Sections, Division 01 - General Requirements, Division 02 - Existing Conditions, etc.) and then by Section Number and Title.
• Each entry includes a Section Number, Division and Section Title, and a Date.
• Some divisions are marked as "NOT USED" (e.g., Division 03, 04, 06, 10, 11, 12, 14, 22, 25, 31, 33, 34, 48).
• Specific sections are detailed, such as "Noise and Vibration Control for HVAC Piping and Equipment" (Section 23 05 41), "Testing, Adjusting, and Balancing for HVAC" (Section 23 05 93), "HVAC and Boiler Plant Insulation" (Section 23 07 11), and "Direct-Digital Control System for HVAC" (Section 23 09 23).
• Electrical sections include "Requirements for Electrical Installations" (Section 26 05 11), "Low-Voltage Electrical Power Conductors and Cables" (Section 26 05 19), "Grounding and Bonding for Electrical Systems" (Section 26 05 26), "Raceway and Boxes for Electrical Systems" (Section 26 05 33), "Overcurrent Protective Device Coordination Study" (Section 26 05 73), "Panelboards" (Section 26 24 16), "Wiring Devices" (Section 26 27 26), "Enclosed Switches and Circuit Breakers" (Section 26 29 21), "Facility Lightning Protection" (Section 26 41 00), and "Low-Voltage Transformers" (Section 26 22 00).
• Communications sections include "Requirements for Communications Installations" (Section 27 05 11), "Cable Trays for Communications Systems" (Section 27 05 36), "Identification for Communications Systems" (Section 27 05 53), "Communications Copper Backbone Cabling" (Section 27 13 13), "Communications Copper Cable Splicing and Terminations" (Section 27 13 13.13), "Communications Optical Fiber Backbone Cabling" (Section 27 13 23), "Communications Optical Fiber Splicing and Terminations" (Section 27 13 23.13), "Communications Patch Cords, Station Cords, and Cross Connect Wire" (Section 27 16 19), "Communications Cabinets, Racks, Frames, and Enclosures" (Section 27 11 16), "Communications Rack Mounted Power Protection and Power Strips" (Section 27 33 53), and "Communications Termination Blocks and Patch Panels" (Section 27 11 19).
• Electronic Safety and Security sections include "Common Work Results for Electronic Safety and Security" (Section 28 05 00), "Conductors and Cables for Electronic Safety and Security" (Section 28 05 13), "Grounding and Bonding for Electronic Safety and Security" (Section 28 05 26), "Conduits and Backboxes for Electronic Safety and Security" (Section 28 05 28.33), "Commissioning of Electronic Safety and Security Systems" (Section 28 08 00), "Intrusion Detection System" (Section 28 16 00), "Physical Access Control System" (Section 28 13 00), and "Video Surveillance" (Section 28 23 00).

This document serves as a table of contents, providing bidders with a structured overview of the technical specifications that will govern the "EHRM Infrastructure Upgrades" project. It allows potential bidders to quickly identify the relevant sections and divisions of the specifications that pertain to their area of expertise or interest, enabling them to focus their review on the most critical information for their bid preparation. The dates associated with each section may indicate the version or revision date of that particular specification, which is important for ensuring bidders are working with the most current information.

Specifications / Drawings

This document contains the "Final Bid Documents" for the "549-21-700 | EHRM INFRASTRUCTURE UPGRADES" project at the Dallas VAMC in Dallas, TX. The document is primarily a compilation of various specification sections and a "List of Drawings" (Section 00 01 15). The specifications cover a wide range of construction-related topics, including:

• General Requirements: Safety, construction security, document control, operations and storage areas, alterations, disposal and retention, protection of existing vegetation, and historic preservation.

• Specialized Sections: Project Schedules (CPM), Shop Drawings/Product Data/Samples, Quality Control (CQC), Testing Laboratory Services, Construction Waste Management, Temporary Environmental Controls, Firestopping, Joint Sealants, Expansion Joint Cover Assemblies, Hollow Metal Doors and Frames, Interior Wood Doors, Access Doors and Frames, Door Hardware, Structural Steel Framing, Non-Structural Metal Framing, Gypsum Board, Resilient Tile Flooring, Painting, Fire Extinguisher Cabinets, Seismic Restraint Requirements, Wet-Pipe Sprinkler Systems, Common Work Results for HVAC, and Asbestos Abatement (Traditional, Glovebag, Floor Tile and Mastic, Roofing, Lead-Based Paint Removal).

• Commissioning: Detailed requirements for the commissioning process, including roles and responsibilities, submittals, and testing procedures for various building systems (HVAC, Electrical, Communications, Electronic Safety and Security).

• Project Scope: EHRM Infrastructure Upgrades at the Dallas VAMC.

• Key Specification Areas: The document is extensive, covering numerous technical specifications and safety requirements, including detailed procedures for asbestos and lead-based paint abatement, firestopping, HVAC, electrical, plumbing, and structural steel.

• Drawings: A comprehensive "List of Drawings" (Section 00 01 15) is included, detailing various architectural, structural, civil, fire protection, mechanical, electrical, and telecommunications plans, as well as specific system trending and alarm data.

• Quality Control & Safety: Extensive requirements for Quality Control (CQC), Safety Requirements (including detailed plans for asbestos and lead-based paint abatement), and Commissioning are outlined.

• The document is a compilation of numerous specification sections and drawing lists, indicating a complex project with diverse requirements.

• Bidders should pay close attention to the detailed requirements for hazardous material abatement (asbestos and lead-based paint), safety, and commissioning, as these are extensively covered.

• The "List of Drawings" provides a critical overview of the project's scope and the various disciplines involved.

Form / Attachment / Pricing Sheet

This document, "Attachment 9 - Division Cost Breakdown.xlsx", appears to be an Excel spreadsheet containing a detailed cost breakdown for a construction project. It is intended to provide bidders with a structured format for estimating and reporting costs across various construction divisions.

The spreadsheet is organized by CSI (Construction Specifications Institute) divisions, ranging from Division 00 (Special Sections) to Division 48 (Electrical Power Generation). Each division sheet includes columns for labor and materials, with sub-columns for quantity, unit, cost per unit, and total cost. The "SUMMATION" sheet provides an overview of subtotals, overhead, profit, bonds, and a project total.

This document is crucial for bidders as it outlines the expected format for cost estimation and breakdown. Bidders will likely need to use this template to submit their pricing, ensuring consistency and comparability across all proposals. The structure indicates the government's expectation for detailed cost reporting by construction division. Note that all cost fields in the provided text are currently populated with '0.0', suggesting this may be a template or an initial estimate.

Amendment / Modification

This addendum (Addendum No. 02) modifies previously issued contract documents. The key changes include:

• General Requirements: Specification 01 32 16.15, "PROJECT SCHEDULES (SMALL PROJECTS – DESIGN/BID/BUILD)" is replaced in its entirety.

• Electronic Safety and Security: Part 1.6 of Specification 28 31 00, "FIRE DETECTION AND ALARM" is removed.

• Specification 01 32 16.15 (PROJECT SCHEDULES)

• Specification 28 31 00 (FIRE DETECTION AND ALARM) - Part 1.6

This addendum primarily impacts the project scheduling requirements and removes a specific section from the fire detection and alarm specifications. Bidders should review the updated specifications for any changes to proposal requirements or submission details.

Solicitation / RFP / RFQ

This solicitation is a Request for Proposal (RFP) for the EHRM Infrastructure Upgrades Construction project at the VA North Texas Health Care System in Dallas, TX. The estimated magnitude of construction is between $50,000,000 and $75,000,000. The government intends to award a contract to the responsible offeror whose proposal represents the best value.

• The contractor shall provide all tools, equipment, materials, labor, supervision, and personnel necessary for the completion of the project.

• Work includes general construction for areas affected by EHRM upgrades, alterations, sitework, and removal of existing construction.

• All work must be performed per attached Specifications and Drawings.

• Contract Type: Firm-Fixed-Price.

• Period of Performance: Within 730 calendar days after receiving notice to proceed.

• Estimated Value: $50,000,000 to $75,000,000.

• Proposals must be submitted via email to shawn.tavernia@va.gov (cc: bridget.may@va.gov) by March 16, 2026, at 2:00 PM EST.

• Proposals must be submitted in three volumes (Technical, Price, Administrative) as searchable PDFs, each under 5MB.

• Evaluation will be based on a tradeoff process under "Best Value," considering Past Performance (most important), SDVOSB/VOSB Commitment, and Price.

• Key deadlines:

  • Technical Questions Cut-off: March 16, 2026, 2:00 PM EST.
  • Proposal Due Date: April 14, 2026, 2:00 PM EST.

• This project is UNRESTRICTED.

• Offerors must be registered in the System for Award Management (SAM).

• Specific requirements for SDVOSB/VOSB commitment will be evaluated.

• A site visit is scheduled; see Attachment 10 for instructions.

• Bid Guarantee required (SF 24), not less than 20% of proposal price, not to exceed $3,000,000.

• Payment and Performance Bonds (SF 25A and SF 25) will be required upon award.

• Pricing must be submitted in whole dollar values.

Form / Attachment / Pricing Sheet

This document, "Project Information Sheet for Contractors," is a form that potential bidders must complete and submit as part of their proposal. It requires detailed information about past contracts and projects to demonstrate the offeror's experience.

• Offeror Information: Name, role (prime/subcontractor), contract number, project number, NAICS code, project title, location, and contact details for both the offeror and the owner's project manager.

• Contract Details: Type of contract, award amount, final amount, award date, notice to proceed date, scheduled and actual completion dates.

• Performance Data: Number and reasons for change orders, OSHA citations (if applicable).

• Subcontractors: List of major subcontractors with points of contact and phone numbers.

• Narrative: A detailed description of the work performed and its relevance to the current opportunity (very relevant, relevant, or somewhat relevant).

• The experience presented must align with all Request for Proposal instructions.

• A separate form must be completed for each contract/project submitted.

• Provide frank, concise comments regarding YOUR PERFORMANCE on the identified contracts.

This form is crucial for bidders to document and present their relevant past performance and experience. The information provided will likely be a significant factor in the evaluation of proposals, demonstrating the offeror's capability to successfully perform the work required by the opportunity.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire (PPQ) intended to gather feedback on a contractor's performance. It is to be completed by a client or evaluator and returned to the requesting firm for inclusion in their proposal submission. The PPQ does not count towards the proposal's page limitations.

Section 1: Contract Information (Requester to complete)

• Contractor Information (Name, Address, POC, Contact Info, Work Performed As, Percent of Project Work Performed, Prime Contractor if Subcontractor)
• Contract Information (Title, Number, Type, Location, Award Date, Acceptance Dates, Original and Final Prices, Price Differences)
• Project Description (Scope Included)

Section 2: Performance Information (Client to complete)

• Evaluator Information (Name, Position, Address, Phone, Email, Role in Project)
• Performance Ratings (Quality, Schedule, Cost Control, Business Relations, Management, Reliability, Customer Support, Overall Performance, Other Areas) using ratings E, V, S, M, U, N/A.
• Specific questions on whether another contract would be awarded and overall rating.
• Additional Remarks section for detailed feedback.
• Evaluator Signature and Date.

This questionnaire is crucial for bidders to obtain from their clients. The completed PPQs will be incorporated into the proposal submission. The Veterans Health Administration (VHA) Program Contracting Activity Central (PCAC) will use these evaluations to assess the offeror's ability to perform construction services in VISN 8 Mainland. Bidders must ensure these are completed thoroughly and submitted by the deadline specified in the solicitation.

Form / Attachment / Pricing Sheet

This document provides instructions and details for an organized site visit related to the Dallas EHRM Construction project. It is intended to guide potential bidders on attending the site visit to better understand the project location.

• Date and Time: Wednesday, March 4, 2026, at 10:00 AM CST.
• Meeting Point: Multipurpose Room in Building 9.
• Location: North Texas Health Care System, Dallas VA Medical Center, 4500 S Lancaster Rd, Dallas, TX 75216.
• Directions: Specific driving instructions are provided, including turning onto E Ann Arbor Ave and identifying parking near Building 9 or using the Liberty Parking Garage.
• Contact Information: Engineering Service (214-857-1021) for day-of questions, and the Contracting Officer (CS) via email provided in the solicitation for other inquiries.
• Question Submission: Questions cannot be answered during the walkthrough. They must be submitted in writing per the solicitation, with formal responses provided via amendment on SAM.gov.
• Recommendation: Attending the site visit is highly recommended, and reviewing drawings beforehand is advised. Due to ongoing veteran care, some areas may not be accessible during the visit.
• Campus Map: An attached campus map is provided, with Liberty Parking Garage recommended as a target parking location.

This document is crucial for bidders intending to visit the project site. It provides all necessary logistical information for attendance, including location, directions, meeting points, and contact details. It also clarifies the process for submitting questions related to the site visit and the overall solicitation, emphasizing that questions must be submitted formally in writing and will be addressed via amendment. The recommendation to attend and review drawings highlights its importance for understanding the project scope and requirements.

Form / Attachment / Pricing Sheet

This document is a "General Decision Number" for construction projects in Dallas County, Texas. It provides prevailing wage rates and fringe benefits for various construction trades, as required by federal regulations for government contracts.

• General Decision Number: TX20260241, dated 01/02/2026.
• Area: Dallas County, Texas.
• Construction Type: Building Construction Projects (excluding single-family homes and apartments up to 4 stories).
• Trades Included: Lists specific trades such as Asbestos Worker/Heat & Frost Insulator, Boilermaker, Millwright, Elevator Mechanic, Power Equipment Operator, Ironworker, HVAC Mechanic, Pipefitter, Bricklayer, Carpenter, Caulker, Cement Mason/Concrete Finisher, Drywall Hanger, Electrician (various specialties), Form Worker, Glazier, Highway/Parking Lot Striping Operator, Installer Siding, Installer Sign, Insulator, Laborer (various types), Lather, Operator (various types), Painter, Plasterer, Plumber, Roofer, Sheet Metal Worker, Sprinkler Fitter, Tile Finisher, Tile Setter, Truck Driver (various types), and Welders.
• Rates and Fringes: For each trade, the document specifies the hourly wage rate and the hourly fringe benefit rate.
• Footnotes: Includes important notes regarding the calculation of fringe benefits based on years of service and a list of holidays.
• Executive Orders: References Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage), outlining contractor obligations and minimum wage requirements for federal contracts.

This document is crucial for bidders on federal construction projects in Dallas County, Texas. It establishes the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on the contract. Bidders must use these rates when calculating their labor costs and ensuring compliance with federal labor standards. Failure to adhere to these wage determinations can result in penalties.

Amendment / Modification

This addendum provides minor edits, clarifications, and corrections to selected specification sections of the Project Manual.

Key changes include:

• General: Minor edits, clarifications, and corrections to selected specification sections.

• Project Manual - General: Added section 27 05 36 "CABLE TRAYS FOR COMMUNICATIONS SYSTEMS" to the Table of Contents.

• Hazardous Materials: Removed highlighting from specification 02 83 33.13 "LEAD-BASED PAINT REMOVAL AND DISPOSAL".

• Architectural - General Requirements (01 00 00): Revised wording for section 1.2.B and added item Q to section 1.6 defining working hours.

• Architectural - Temporary Environmental Controls (01 57 19): Revised working hours for section 1.5.F.1.

• Architectural - Door Hardware (08 71 00): Removed highlighting from specification.

• Structural - Testing Laboratory Services (01 45 29): Removed the 'Spec Writer' note.

• Electronic Safety and Security - Fire Detection and Alarm (28 31 00): Removed reference to a 5-year period of service in section 1.6 "Guaranty Period Services", paragraph A.

• Project Manual - Table of Contents

• Specifications: 02 83 33.13, 01 00 00, 01 57 19, 08 71 00, 01 45 29, 28 31 00.

This addendum primarily consists of clarifications and minor edits. It does not appear to significantly alter proposal deadlines or core submission requirements, but bidders should review the specific changes to ensure full understanding of the updated specifications.

Form / Attachment / Pricing Sheet

This document contains construction bid drawings, specifically Volume 3, which details telecommunications floor plans for demolition across various levels and areas of the Dallas VA Medical Center. It serves as a critical component for bidders to understand the existing telecommunications infrastructure and the scope of demolition work required for the EHRM Infrastructure Upgrades project.

• Floor Plans: Detailed layouts for telecommunications demolition on multiple levels (Basement, Level 1, Level 2, Level 3, Level 4, Level 5, Level 6, Level 7, Level 8, Level 9, Level 10, Level 11, Interstitial spaces, and specific areas like Area A, B, C).
• Demolition Notes: General notes provide guidance on the diagrammatic nature of the drawings, the requirement for field verification of existing conditions, and procedures for handling system shutdowns and coordinating with the COR and EOR.
• Symbols and Keynotes: Legends and keynotes define symbols used for existing and demolition work, as well as specific telecommunications notes relevant to the demolition scope.
• Consultant Information: Lists of civil engineers, industrial hygienists, mechanical/electrical/plumbing/telecom consultants, structural engineers, fire protection engineers, and physical security consultants involved in the project.
• Drawing Information: Includes drawing titles, project title (EHRM Infrastructure Upgrades Dallas, TX), project number (549-21-700), building number, location (Dallas VA Medical Center), date, and drawing numbers.

This document is essential for bidders to accurately assess the scope of work, identify existing telecommunications infrastructure to be demolished, and understand the layout and conditions of the site. It directly impacts the bidding process by providing the necessary visual information for cost estimation and project planning related to the demolition and potential subsequent installation phases.

Form / Attachment / Pricing Sheet

This document contains construction bid drawings, specifically Volume 2, for the "EHRM Infrastructure Upgrades Dallas, TX" project (Project Number 549-21-700) at the Dallas VA Medical Center. These drawings provide detailed architectural and engineering plans necessary for bidders to understand the scope of work related to construction and renovation within Buildings TT49 through TT55.

• Building Identification: Drawings are organized by building number (TT49, TT50, TT51, TT52, TT53, TT54, TT55).
• Level Plans: Detailed floor plans are provided for Level 1 of each building.
• Demolition Plans: Specific demolition plans are included for Level 1 of each building, indicating areas and elements to be removed.
• Dimensions and Details: Room dimensions, wall types, ceiling details, and specific construction notes are provided.
• Legends and Notes: Comprehensive legends for demolition, floor plans, reflected ceiling plans, partitions, and keynotes are included to aid in interpreting the drawings. General plan notes and general demolition plan notes outline critical requirements for contractors, such as verifying dimensions, maintaining negative pressure during demolition, providing protective coverings, and aligning new partitions.
• Consultant Information: Details for various engineering and architectural consultants involved in the project are listed.

These drawings are crucial for bidders to accurately assess the scope of work, identify existing conditions, understand demolition requirements, and plan for new construction. They are essential for developing a comprehensive and competitive bid for the EHRM Infrastructure Upgrades project.

Form / Attachment / Pricing Sheet

This document contains the "Final Bid Documents" (Volume 1) for the EHRM Infrastructure Upgrades project at the Dallas VA Medical Center, specifically focusing on construction bid drawings for the Herzog Campus Main Level 1 and Level 2, as well as roof, site, and demolition plans. It also includes a comprehensive "Sheet Index" listing all drawings by discipline and consultant information.

• Sheet Index: A detailed list of all drawings included in the bid package, organized by discipline (General, Environmental, Civil, Structural, Architectural, Fire Protection, Mechanical, Electrical, and Telecommunications).
• Construction Bid Drawings (Volume 1): Detailed floor plans for Herzog Campus Main Level 1 and Level 2, showing room layouts, dimensions, and existing conditions.
• Hazardous Materials Abatement: Drawings specifically detail areas requiring abatement for asbestos-containing materials (e.g., drywall ceilings, pipe insulation, waterproofing, roofing components, door frame caulks, window frame caulks, floor tiles) and lead-containing bathroom fixtures.
• Roof Plans: Drawings for various buildings indicating areas for asbestos roof system removal.
• Site and Demolition Plans: Overall site layout, utility plans, and demolition plans detailing proposed underground communication routes, pavement removal/replacement, sidewalk and curb work, and erosion control measures.
• Structural Details: General structural notes, design criteria, and details for equipment pads, joist reinforcement, roof openings, and concrete sidewalks.
• Reference Plans: Detailed floor plans and reflected ceiling plans indicating demolition and new construction areas, partition types, and fire ratings.
• Consultant Information: Lists engineering and architectural consultants, contact information, and registration numbers.
• Administrative Information: Includes VA forms, approval signatures, and revision history.

This document is critical for bidders to accurately assess the scope of work, understand the physical layout, identify all areas requiring hazardous material abatement, comprehend existing site conditions and utility infrastructure, and accurately price their bids. The detailed plans provide the necessary information to plan and execute the project according to specifications. It serves as a table of contents for the entire set of bid documents, enabling bidders to quickly locate specific information related to their scope of work and understand the full project requirements.

Solicitation / RFP / RFQ

This is a solicitation for a single firm-fixed-price contract for the design-bid-build EHRM Infrastructure Upgrades construction project (# 549-21-700) at the Dallas VA Medical Center (VAMC). The project aims to construct a new stand-alone single-story building to support primary care and mental health services, addressing deficiencies in the IT and Communication Service Lines to prepare for a national Cerner upgrade. The upgrades are necessary to modernize the facility's Information Technology (IT) and physical infrastructure.

• Construction of a new stand-alone single-story building.

• Provision of all tools, equipment, materials, labor, supervision, and management.

• Compliance with all VA solicitation drawings and specifications, VA regulations, procedures, and applicable codes.

• Implementation of upgrades to meet VHA Healthcare Environment and Facilities Programs (HEFP) requirements.

• Work must be completed in strict accordance with the Statement of Work (SOW), drawings, and specifications.

• Contract Type: Firm-Fixed-Price

• Period of Performance: Approximately 730 calendar days from the Notice to Proceed.

• Magnitude of Construction: Estimated between $50,000,000 and $100,000,000.

• The solicitation will be issued as a Request for Proposals (RFP) under FAR part 15.

• Evaluation will be conducted using tradeoff procedures as detailed in the solicitation.

• All questions must be submitted in writing via email to Shawn.Tavernia@va.gov. Telephone inquiries will not be accepted.

• The solicitation will be issued UNRESTRICTED.

• Applicable NAICS Code: 236220 with a size standard of $45.0 million.

• The solicitation is anticipated to be issued in late January 2026.

• The place of performance is Dallas VA Medical Center, 4500 S Lancaster Rd, Dallas, TX 75216, USA.