Z2DA--554-26-101 Reslope Shower Floors in Bldg H&K Patient Rooms (VA-26-00013277)

Statement of Work (SOW) / Performance Work Statement (PWS)

This document specifies requirements for the installation of facility sanitary and vent piping systems, including associated equipment and accessories.

• Installation of sanitary sewer and vent systems.

• Provision of piping, equipment, and accessories.

• Compliance with Sustainable Design Requirements.

• Related work includes firestopping, painting, pipe hangers and supports, materials identification, pipe insulation, and joint sealants.

• Materials specified include cast iron, copper DWV, and Polyvinyl Chloride (PVC) piping and fittings, with specific applications and limitations for each.

• Various types of cleanouts (floor, wall, etc.) and floor drains (FD-A through FD-T) are detailed, with specific ANSI compliance and material requirements.

• Trench drains (TD-1 through TD-4) and specialty pipe fittings (transition couplings, dielectric fittings) are specified.

• Pipe installation must comply with the National Standard Plumbing Code (NSPC) and specific project requirements, including slope, seismic restraint, and joint construction methods (hub and spigot, hubless, threaded, soldered).

• Pipe hangers, supports, and accessories must meet NSPC and project specifications, with detailed spacing and rod diameter requirements.

• Fire stopping and waterproofing measures are required at penetrations.

• Testing of sanitary waste and drain systems is required, including water or air tests and observation of p-traps.

Not explicitly stated in this section of the document, but implied to be for the Replacement Medical Center Facility.

• Sustainable Design Requirements must be met.
• Specific applications and limitations for different piping materials (cast iron, copper, PVC) are detailed.
• Requirements for cleanouts, floor drains, and trench drains are extensive.
• Installation must adhere to specific codes and standards (NSPC, ASME, ASTM, CISPI, ASSE, etc.).
• Seismic restraint is required.
• Specific joint construction methods are mandated.
• Pipe hangers and supports have detailed spacing and material requirements.
• Fire stopping and waterproofing are critical at penetrations.
• Testing procedures are outlined.

Form / Attachment / Pricing Sheet

This document contains photographic examples of bathroom facilities, likely intended to illustrate specific design features, accessibility standards, or existing conditions relevant to a construction or renovation opportunity. The figures are labeled with "example only" and specific identifiers (e.g., H1-141, K2-314), suggesting they serve as visual references.

• Images depict various aspects of bathrooms, including showers with grab bars, toilets (some stainless steel), sinks, flooring (tile and speckled epoxy), wheelchairs, and shower chairs.
• Some images include signage, such as "Please Do Not Flush Sanitary Items, Wipes Paper Towels, or any Trash Only Flush Toilet Paper Thank You."
• Labels like "REIVAB USE" on a chair suggest specific intended uses for certain fixtures or areas.

These photos provide visual context for the type of facilities or the standards being considered for an opportunity. Bidders can use these images to understand the expected aesthetic, functional requirements, and accessibility features of the bathrooms in question, which may inform their proposals, material selections, and construction approaches.

Form / Attachment / Pricing Sheet

This document is a "Return of Submittal" form, used by Kiewit-Turner to submit product information for approval related to "Trench Drain 3" for the VA Medical Center in Denver, CO. It also includes "Notes/Comments" from the contractor regarding installation and compliance with specifications.

• Submittal Item: Trench Drain 3
• Supplier/Manufacturer: Not explicitly stated on this page, but implied to be a supplier of trench drains.
• Notes/Comments:
  • Install with 6" membrane per specifications.
  • Provide trench drain with diagonal pattern as per spec.
  • Trench drain shall be in compliance with ANSI A112.6.3.
• VA Action: Approved, as Noted.
• Received Date: 05/05/2014

This document confirms the approval of a specific trench drain product (Trench Drain 3) and highlights key installation and compliance requirements. Bidders involved in similar work should note the specified compliance with ANSI A112.6.3 and the requirement for a diagonal pattern and membrane installation, as these may be relevant to their own submittals or understanding of project requirements.

Solicitation / RFP / RFQ

This solicitation is for the "Reslope Shower Floors in Building H&K Patient Rooms" project at the Rocky Mountain VAMC in Aurora, CO. The project involves correcting drainage and surfaces in approximately 60 shower rooms to meet a required slope of 1:48 (1/4" drop per 1' run) toward the drain. The estimated project magnitude is between $1,000,000 and $2,000,000.

• Demolition of existing tile or resinous flooring, mortar base, and concrete grinding as needed.

• Installation of new mortar base, tile edging, waterproofing membrane, and tile.

• Grouting of new tile flooring.

• Replacement of all sixty (60) trench drain assemblies.

• Temporary removal and reinstallation of patient toilets/water closets.

• Adherence to VA policies, industry best practices, applicable codes, and standards.

• Compliance with OSHA (including "Competent Person" and OSHA-30 training) and other safety regulations.

• Submission of a Site-Specific Safety Plan (SSSP) and Job Hazard Analyses (JHAs).

• Strict adherence to VA standards, OSHA, AIA Construction Guidelines, Joint Commission Environment of Care Standards, and applicable building codes.

• Special considerations for work in occupied Mental Health spaces (Floor H2).

• Contract Type: Firm-Fixed-Price.

• Period of Performance: 730 calendar days from Notice to Proceed (NTP).

• Estimated Value: $1,000,000 to $2,000,000.

• Proposals are due by March 20, 2026, 10 AM MT, submitted via email to Elia-Laritza.Ruiz-Manzo@va.gov.

• Evaluation Factors: Past Performance (most important), Compliance Requirements, and Price.

• Tradeoff source selection procedures will be used.

• A site visit is scheduled for February 26, 2026, at 10 AM MT.

• All questions must be submitted in writing via email by March 6, 2026, 10:00 AM MT.

• This is a competitive acquisition. Offerors must be registered in SAM.

• Apparent successful offerors must be verified by the SBA certification database as SDVOSB at the time of offer submission and contract award.

• NAICS Code: 236220 (Commercial and Institutional Building Construction), Small Business size standard: $45M.

• Includes Base Pricing (CLIN 0001) and Alternate 1 Deduct Pricing (CLIN 0002) for replacing trench drain assemblies.

• Award will be made to the responsible offeror whose proposal is most advantageous to the Government, with tradeoffs permitted.

• A bid guarantee of 20% (not to exceed $3,000,000) is required.

Form / Attachment / Pricing Sheet

This document is a blank Past Performance Questionnaire intended for clients to evaluate a contractor's performance on a previous project. Bidders will likely need to provide this form to their clients to complete and submit as part of their proposal.

The questionnaire is divided into several sections for client completion:

• Contractor Information: Details about the firm performing the work.
• Work Performed As: Specifies the contractor's role (prime, subcontractor, etc.) and percentage of work.
• Contract Information: Details of the contract, including number, type, dates, and pricing.
• Project Description: A description of the work performed and its relevance to the current opportunity.
• Client Information: Details about the client organization.
• Performance Information: A detailed rating scale (Exceptional to Not Available) for various performance aspects including Quality, Schedule/Timeliness, Customer Satisfaction, Management/Personnel/Labor, Cost/Financial Management, Safety/Security, and General aspects. This section requires narrative explanations for unsatisfactory or marginal ratings.
• Strengths, Weaknesses, Deficiencies, Comments: Open fields for detailed feedback.

Bidders must understand that this form is a standard tool for gathering past performance information. They should proactively identify past clients who can provide a favorable review using this questionnaire. The quality and content of the completed questionnaire will significantly impact the evaluation of their past performance. Bidders should ensure they provide this form to their clients well in advance of any submission deadlines and encourage detailed, positive feedback.

Form / Attachment / Pricing Sheet

This document, titled "Prime and Sub Contractor Construction Breakdown.xlsx", appears to be an Excel spreadsheet intended to provide a breakdown of construction costs, likely for prime and subcontractors. It is attached to the SAM.gov opportunity record.

The spreadsheet contains multiple sheets, including 'SUMMATION', 'Div 0 Special Sections' through 'Div 34 Transportation', and others. Each sheet is structured to detail construction cost breakdowns by division, system/subsystem, and includes fields for labor and materials, quantities, unit costs, and totals. It also includes sections for adjustments, overhead, profit, and bonds.

This document is crucial for bidders to understand the estimated cost breakdown of the project. It can help in formulating their own pricing strategies, identifying potential areas for subcontracting, and understanding the government's estimated cost structure for various construction divisions. Bidders should review this breakdown to ensure their proposals are competitive and align with the project's scope and estimated value, although the provided data shows all cost fields as 0.0, indicating it may be a template or an incomplete estimate.

All cost-related fields within the provided text extract show a value of 0.0, suggesting this may be a template or an initial estimate that has not yet been populated with specific project costs.

Form / Attachment / Pricing Sheet

This document is a worksheet designed to help offerors calculate and document the self-performed and subcontracted portions of their work for General Construction (NAICS code 236220) and specialty trade opportunities. It ensures compliance with the requirement that at least 15% (or 25% for specialty trades) of contract performance costs for personnel are incurred by the offeror's employees or employees of other eligible Service-Disabled Veteran-Owned Small Business (SDVOSB) concerns.

• Breakdown by Specification Division: Requires a breakdown of material and personnel costs for each applicable specification division.
• Cost Categories: Includes fields for Personnel Cost, Material/Equipment Costs, Profit, Home Office Overhead, and Bond.
• SDVOSB Identification: Requires identification of whether an SDVOSB vendor will perform work within each division.
• Calculation of Self-Performed Personnel Costs: Provides a step-by-step calculation to determine the total amount of work to be self-performed by the prime or eligible SDVOSB subcontractors.
• Certification: Requires a signature, typed name, and title from an authorized representative certifying the accuracy of the representations.

This worksheet is critical for bidders to demonstrate compliance with subcontracting requirements, particularly those related to SDVOSB participation. Bidders must accurately complete this form to detail their cost breakdown and self-performance calculations, which will likely be a key component of their proposal evaluation and a condition for contract award.

Form / Attachment / Pricing Sheet

This document is the VA Notice of Limitations on Subcontracting - Certificate of Compliance for Services and Construction. It requires offerors to certify their compliance with subcontracting limitations if awarded a contract. This is a mandatory certification for the offeror's bid, quotation, or proposal.

• Services: Offeror certifies they will not pay more than 50% of the government's payment to firms that are not VIP-listed SDVOSBs or VOSBs.
• General Construction: Offeror certifies they will not pay more than 85% of the government's payment to firms that are not VIP-listed SDVOSBs or VOSBs. Costs of materials are excluded.
• Special Trade Construction: Offeror certifies they will not pay more than 75% of the government's payment to firms that are not VIP-listed SDVOSBs or VOSBs. Costs of materials are excluded.
• The offeror must acknowledge that false certification is subject to penalties under Title 18, United States Code, Section 1001.
• The offeror agrees to provide documentation to VA to demonstrate compliance upon request.
• The offeror must complete, sign, and return this certification with their bid, quotation, or proposal.

This form is critical for bidders to understand and acknowledge the subcontracting limitations applicable to the contract. Failure to provide a completed and signed certification will render the offer ineligible for award. Bidders must select the appropriate category (Services, General Construction, or Special Trade Construction) and ensure their proposed subcontracting plan adheres to the specified percentages. The offeror must also be prepared to provide supporting documentation to verify compliance.

Questions & Answers / Clarifications

This document provides answers to vendor questions regarding Solicitation 36C25926R0004 for Reslope Shower Floors in Bldg H&K Patient Rooms.

• Trench Drain Brand: Bidders should refer to the attachment "22 13 00-31 - Trench Drain 3 Submittal.pdf" for the specified brand or an approved equal. This attachment should be checked in the Solicitation posting.
• Trench Drain Lengths: Information regarding the lengths of the trench drains is provided in the attachment "SOW Attachment A rooms 554-26-101 Reslope Shower Floors.pdf". These lengths are approximate and the attachment should be checked in the Solicitation posting.

This document clarifies specific material requirements (trench drains) and provides associated documentation for bidder reference. Bidders should consult the referenced attachments for detailed specifications.

Form / Attachment / Pricing Sheet

This document contains construction drawings for the "Reslope Shower Floors in Bldg H&K Patient Rooms" project at the Rocky Mountain Regional Veterans Affairs Medical Center. It details the architectural and plumbing plans for the specified areas.

• Project Information: Project Number 554-26-101, Project Title: Reslope Shower Floors in Bldg H&K Patient Rooms, Project Location: Rocky Mountain Regional Veterans Affairs Medical Center, Aurora, CO.
• Drawing List: A comprehensive list of all drawings included, categorized by drawing number and title (e.g., Title Page and Details, Floor Plans for Buildings H and K, Waste Drain and Vent Piping Plans).
• Details and Plans: Specific details on shower trench construction, floor tiling, and various interface details for different flooring and wall finishes. Floor plans for Buildings H and K are provided, showing room layouts, designations, and dimensions.
• Plumbing Plans: Detailed waste, drain, and vent piping plans for multiple levels of Buildings H and K.
• Dates: The drawings are dated September 26, 2025.

These drawings are critical for any bidder to understand the scope of work, the specific locations requiring resloping of shower floors, and the technical requirements for the construction and plumbing aspects of the project. They provide the detailed specifications necessary for accurate bidding and execution.

Form / Attachment / Pricing Sheet

This document provides detailed technical specifications, application instructions, and physical properties for the Sherwin-Williams DECORATIVE MOSAIC EPOXY COATING SYSTEM. It serves as a guide for approved contractors on how to properly install the system.

• Product Description: A mosaic pattern floor covering using vinyl chips in a clear or pigmented epoxy, sealed with a polyurethane finish, offering chemical resistance.
• Physical Properties: Details on abrasion resistance, flexural strength, adhesion, flammability, impact resistance, and resistance to elevated temperatures.
• Advantages: Aesthetically pleasing appearance, limitless color options, seamless, chemical/stain resistant, high gloss finish, and LEED v4 compliant.
• Uses: Suitable for nursing homes, healthcare facilities, clean rooms, pharmaceuticals, office buildings, locker rooms, and cafeterias.
• Installation Instructions: Covers surface preparation (concrete and general), temperature requirements, and detailed mixing and application steps for Primer, Base Coat, Grout Coat, and Seal Coat.
• Application Information: Includes VOC content, material types, mix ratios, theoretical coverage rates, and packaging for each component.
• Material Storage, Maintenance, Disclaimer, and Warranty: Provides guidance on storing materials, maintaining the installed system, legal disclaimers, and warranty information.

This document is crucial for bidders to understand the specific product requirements, application procedures, and performance standards associated with the decorative mosaic epoxy coating system. It informs potential contractors about the technical aspects of the material, ensuring they can accurately assess their capability to meet the project's demands and provide compliant proposals.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the procedure for resloping shower floors in Building H&K patient rooms, identified as project 554-26-101. The contractor is responsible for executing and documenting the process, seeking approval from the Contracting Officer's Representative (COR) at various stages.

The work involves modifying existing shower floors to ensure a proper slope towards the drain. Key tasks include:

• Room Preparation: Establishing Infection Control Risk Assessment (ICRA) and Pre-Construction Risk Assessment (PCRA) barriers, setting up negative pressure, covering sensitive areas, and protecting flooring.

• Room Demolition: Turning off water, removing toilets, marking demolition boundaries, safely removing tiles or epoxy flooring, and clearing debris.

• Mortar Bed and Water Proofing: Installing a new mortar bed with a specified slope (1/4" per foot towards the drain), and applying a waterproof membrane.

• Tiling/Flooring: Installing new tiles (or epoxy flooring for H2 rooms) according to approved patterns and ensuring proper grout joint alignment and slope.

• Room Restoration: Providing pressure recordings, cleaning the work area, removing protective measures, and obtaining final COR/IPC approval.

• A slope of 1/4" per foot towards the drain must be confirmed using a digital or standard level.

• Negative air pressure must be maintained between the bathroom, bedroom, and hallway.

• ICRA and PCRA forms must be posted and approved.

• Manufacturer's instructions, applicable codes, regulations, and specifications must be followed.

Not explicitly stated in the provided text, but the work is to be performed in patient rooms within Buildings H&K.

• Strict adherence to ICRA and PCRA protocols.
• Use of HEPA filters and negative pressure machines.
• Coordination with COR, IPC, and OSHE staff.
• Use of appropriate personal protective equipment, including silica dust respirators.
• Minimizing noise during demolition activities.
• Following manufacturer's instructions and applicable codes.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document details the requirements for resloping shower floors in various rooms within a facility, as part of Project 554-26-101.

• The primary task involves replacing existing tile and grout in specified shower rooms with new tile and grout, and applying a new resinous epoxy base with vinyl chip broadcast.

• Specific rooms are listed with their approximate square footage, existing and new floor finishes, and east/west orientation.

• The document specifies the exact type of existing tile (PT02 Florida Tile "23835 Urbanite, Gild" 12" x 24") and grout (TG01 Custom Building Products "#122, Linen").

• New tile specified is "Enchant" (3.75 x 12, Color: Grace), a matte finish rated IW+ (interior wet plus), made in the US.

• New grout should match existing grout.

• The document also references Section 09 67 23.20 for Resinous Epoxy Base with Vinyl Chip Broadcast (RES-2), specifying existing (General Polymers "Decorative Mosaic Coating" Sika "Decoflake, Shoreline B-421 1/32") and requiring new to match existing.

• Samples of new tile and grout must be provided for review and approval by VA Interior Design.

• Samples of the new Resinous Epoxy Base with Vinyl Chip Broadcast must also be provided for review and approval by VA Interior Design.

• Not explicitly stated in this attachment, but implied to be within the facility where Project 554-26-101 is located.

• All materials must be approved by VA Interior Design.

• The new tile is specified as made in the US.

Specifications

This document outlines the construction specifications for Project 554-26-101, "Reslope Shower Floors in Bldg H&K Patient Rooms," located at the Rocky Mountain Regional Veterans Administration Medical Center in Aurora, Colorado. The specifications detail various requirements for the project, including:

• General Requirements: Covers general project requirements, schedules, safety, quality control, waste management, and demolition.
• Finishes: Includes specifications for subsurface preparation, schedules for finishes, ceramic/porcelain tiling, and resinous flooring.
• Masonry: Details requirements for masonry grouting.
• Thermal and Moisture Protection: Outlines requirements for joint sealants.
• Plumbing: Covers common work results for plumbing and facility sanitary and vent piping.
• Reference Standards: Lists applicable federal specifications, standards, and commercial item descriptions.

This document serves as a comprehensive guide for contractors bidding on or performing this project, detailing the technical specifications and requirements for the construction work.

Form / Attachment / Pricing Sheet

This document is a technical sheet for the "Enchant HDP®" line of glazed porcelain floor and wall tiles from Florida Tile. It provides detailed specifications, intended uses, and installation guidance for potential bidders or specifiers.

• Product Description: "Enchant HDP®" offers marble-look porcelain tiles suitable for residential and light commercial use.
• Specifications: Includes surface finish (matte, polished), ANSI wet/dry ratings, rectified edge finish, and country of origin (USA for matte, Italy for polished).
• Format, Thickness, and Caliber: Details available sizes for porcelain tiles (e.g., 3.75"x12", 12"x24", 24"x24", 8"x24"), mosaics, and bullnose pieces, along with their average sizes in millimeters and caliber designations (X, Y).
• Item Details: Lists specific item numbers, thickness in millimeters, and color names for various tile options (e.g., BEAUTY MATTE, CHARM POLISHED, GRACE MATTE, HONESTY MATTE).
• Technical Data: Provides test results for Water Absorption, Breaking Strength, Thermal Expansion, Thermal Shock Resistance, Chemical Resistance, Stain Resistance, Freeze/Thaw Resistance, Bond Strength, Shade Variation, Thickness, Surface Hardness (Mohs Scale), Warpage, and Dynamic Coefficient of Friction (DCOF).
• Installation Guidance: Covers substrate requirements, flatness tolerances, setting materials, grout joint recommendations, offset patterns, wet area applications, and care/maintenance.
• Certifications: Lists certifications such as Recycle Content, Greensquared, Greenguard Gold, Health Product Declaration, and Environmental Product Declaration.
• Warranty Information: Outlines Florida Tile's limited warranty for residential (lifetime) and commercial (18 months) installations.

This technical sheet is crucial for bidders to understand the specific product being offered or specified. It details the physical characteristics, performance data, and installation requirements of the "Enchant HDP®" tile line, which will inform proposal development, material selection, and compliance verification for any opportunity involving these tiles.

Form / Attachment / Pricing Sheet

This document is a template for performing Infection Control Risk Assessments (ICRAs) for construction, renovation, and maintenance work within VHA facilities. It outlines minimum requirements for categorizing activities and patient risk to determine necessary infection prevention and control precautions. Facilities may customize this template.

• Activity Categorization (Table 1): Defines four categories (A, B, C, D) based on the scope, duration, and dust/debris generation of the work.
• Affected Area Assessment (Table 2): Identifies areas impacted by the activity and associated points of contact.
• Patient Risk Category (Table 3): Classifies patient risk (Low, Medium, High, Highest) based on the type of area affected.
• Level of Precautions (Table 4): Determines the required infection prevention and control precaution level (I, IV) based on the Activity Category and Patient Risk Category.
• Control Measures (Table 5): Details specific control measures required for each precaution level (I-IV), including dust control, barrier construction, negative pressurization, and PPE.
• Completion Measures (Table 6): Outlines cleaning, HVAC, and water system requirements upon activity completion.
• ICRA Permit: A fillable permit form for posting at the site for Level III and IV activities, including project details, estimated dates, and approval signatures.

This document is crucial for bidders as it defines the stringent infection control requirements for the project. Specifically, the project involves "Reslope Shower Floors in Bldg H_K" and has been categorized as Activity Category C with a High/Highest Patient Risk Category, requiring Level IV Infection Prevention and Control Precautions. Bidders must understand these requirements to accurately estimate costs, develop project plans, and ensure compliance during execution. The permit section indicates an estimated project start date of 11-15-2025 and completion date of 11-15-2026.

Form / Attachment / Pricing Sheet

This document is a product catalog and technical data sheet for the "Enchant" Glazed Porcelain tile collection by Florida Tile. It serves to showcase the product's aesthetic qualities, available formats, and technical specifications.

• Aesthetic Descriptions: Details four marble-inspired designs: Honesty, Grace, Beauty, and Charm, highlighting their visual characteristics and inspirations.
• Available Formats: Lists field tile sizes (3.75x12, 12x24), mosaic options (36-piece, hexagon), and trim pieces (bullnose, chair rail, chair rail stop).
• Technical Data: Provides Porcelain Technical Data including ANSI standards, surface hardness, break strength, water absorption, and intended use (residential & light commercial).
• Sustainability: Notes that the product contributes to LEED points and contains pre-consumer recycled content.
• Color Variation: Indicates "V3 Moderate Variation" for the color palette.

This document provides detailed information about a specific tile product. Bidders involved in projects requiring tile procurement, specification, or installation would use this to understand the product's features, dimensions, material properties, and suitability for different applications. It helps in material selection, cost estimation, and ensuring compliance with project requirements.

Other / Unclassified

This document is a standard contract clause (52.222-55) titled "Minimum Wages for Contractor Workers Under Executive Order 14026 Deviation NOV 2025." It outlines the requirements for contractors regarding paid sick leave for their employees working on or in connection with covered federal contracts. The clause incorporates Executive Order 13706 and its implementing regulations (29 CFR Part 13).

• Paid Sick Leave Accrual: Contractors must permit employees to earn at least 1 hour of paid sick leave for every 30 hours worked.
• Use of Leave: Employees can use accrued paid sick leave for various reasons, including their own or a family member's health needs, or needs related to domestic violence, sexual assault, or stalking.
• Contractor Obligations: This includes providing paid sick leave, complying with accrual and use requirements, ensuring subcontractors comply, and maintaining accurate records.
• Recordkeeping: Contractors must maintain detailed records for at least three years, including employee information, hours worked, wages paid, and details of paid sick leave accrued and used. Specific confidentiality requirements apply to sensitive medical or personal information.
• Non-Interference: Contractors must not interfere with employees' accrual or use of paid sick leave, nor discriminate against employees for asserting their rights under the Executive Order.
• Notice: Contractors must post a notice informing employees of their paid sick leave rights.
• Dispute Resolution: Disputes related to this clause are handled by the Department of Labor, not the contract's general disputes clause.

Bidders should review this clause to understand the labor cost implications and compliance requirements related to paid sick leave for employees working on this contract. It mandates specific benefits and recordkeeping that may affect proposal pricing and operational planning.

Form / Attachment / Pricing Sheet

This document is a standard Federal Acquisition Regulation (FAR) clause titled "52.222-54 Employment Eligibility Verification." It outlines the mandatory requirements for contractors regarding the verification of their employees' eligibility to work in the United States, primarily through the E-Verify program.

• Definitions: Clarifies terms such as "Commercially available off-the-shelf (COTS) item," "Employee assigned to the contract," "Subcontract," "Subcontractor," and "United States."
• Enrollment and Verification Requirements: Details the process and timelines for contractors to enroll in and utilize the E-Verify program. This includes verifying new hires and employees assigned to the contract.
• Exceptions: Specifies conditions under which certain entities (e.g., institutions of higher education, state/local governments) may have modified verification requirements, or when verification is not required for previously verified employees.
• Subcontracting Requirements: Mandates that contractors include similar employment eligibility verification requirements in subcontracts meeting specific criteria (value, type of work, location).
• E-Verify Website: Provides the URL for accessing information about the E-Verify program.

Bidders must understand and be prepared to comply with these employment eligibility verification requirements. This clause will likely be incorporated into any resulting contract, necessitating enrollment in and adherence to the E-Verify program for all employees working in the United States, with specific timelines and procedures outlined. Failure to comply can have significant consequences, including referral to suspending and debarring officials.

Solicitation / RFP / RFQ

This is a presolicitation notice for "554-26-101 Reslope Shower Floors in Bldg H&K Patient Rooms" (VA-26-00013277). The Department of Veterans Affairs requires correction of drainage and surfaces in shower rooms within Buildings H & K at the Rocky Mountain Regional VA Medical Center in Aurora, CO. The contractor will provide all labor, materials, and equipment to perform this work.

• Correct shower floor slopes to 1:48 (1/4" drop per 1' run, or 1.20 degrees) towards the drain.

• Demolish existing flooring (tile or resinous) and mortar base in approximately 60 rooms.

• Chip and grind concrete as needed to ensure proper drainage.

• Remove and replace existing trench drain assemblies.

• Temporarily remove and reinstall patient toilets/water closets.

• Install new mortar base, tile edging, waterproofing membrane, and new tile, ensuring correct slope.

• Grout new tile-flooring installations.

• Work must comply with VA policies, Industry Best Practices, and applicable codes and standards.

• The magnitude of this project is estimated between $1,000,000 and $2,000,000.

• A Request for Proposal (RFP) is expected to be posted on or about February 2, 2026.

• The response date is February 26, 2026, at 10:00 AM Mountain Time, Denver, USA.

• This procurement is 100% set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs).

• The NAICS code is 236220 with a small business size standard of $45 million.

• Offerors must be verified by the Small Business Administration (SBA) as an SDVOSB and visible in the SBA certification database at the time of offer submission and contract award.

• The contracting office ZIP code is 80111.

• Place of performance is 1700 N Wheeling St, Aurora, CO 80045.

• Contact: Elia Laritza Ruiz Manzo, Contracting Specialist, Elia-Laritza.Ruiz-Manzo@va.gov, 303-712-5727.

• Attachments referenced include SOW Attachment A (list of affected showers) and SOW Attachment B (trench drain details).