AFNORTH Interior & Exterior Cleaning

Amendment / Modification

This amendment modifies solicitation FA481926Q0021, originally dated April 30, 2026.

• Section 52.212-2, Evaluation--Commercial Products and Commercial Services: The language "The Government will proceed to award the contract to the contractor who provides the best value" has been incorporated.

• The amendment clarifies the evaluation factors for award, stating that the Government will award to the responsible Offeror whose offer is most advantageous, considering price and other factors.

• The evaluation factors are now explicitly listed as: a. Price, and b. Technical Approach.

• The "PRICING EVALUATION" section states the Government will award to the contractor providing the best value, evaluated based on Total Evaluated Price (TEP) for CLIN 0001. Price reasonableness will be determined using FAR 13.106-3(a).

• The "TECHNICAL EVALUATION" section clarifies that the Technical Approach must be determined acceptable, demonstrating an adequate approach for high-reach and exterior execution, safety and HAZMAT plans, and a schedule for cleaning specific exterior elements within 60 days of award. Failure to demonstrate an adequate approach in these areas will render the entire Technical Approach unacceptable. Exceeding minimum requirements may be reflected in the award decision. Merely restating PWS requirements is insufficient.

• A "NOTICE OF AWARD" provision is included, stating that a written notice of award will result in a binding contract.

Form / Attachment / Pricing Sheet

This document, titled "Downspout Locations," appears to be an attachment providing visual information related to the opportunity. It likely details specific locations where downspouts are relevant to the project.

• The document is a presentation file (.pptx).
• The title slide indicates the subject is "Downspout Locations."

Bidders should review this attachment to understand the physical context of the opportunity, specifically concerning downspout locations. This information may be critical for accurately assessing the scope of work, developing technical approaches, and preparing cost proposals, particularly if the opportunity involves work related to these downspout areas.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Performance Work Statement (PWS) outlines the requirements for a one-time interior and exterior cleaning service for the CONR-AFNORTH (1AF) Complex at Tyndall AFB, Florida.

The contractor shall provide all necessary management, labor, equipment, and materials to perform the following tasks:

• Interior Cleaning (Buildings 1210, 1212, 1214):

  • Clean interior windows of lobby (foyer) and breezeway/hallway areas to remove lint, dust, dirt, and grime.
  • Wipe down interior walls, baseboards, and stairwell glass panels/handrails in lobby/foyer and breezeway/hallway areas (up to 60 inches from the floor) to remove fingerprints, dirt, and scuff marks.
  • Clean four hanging light fixtures in the Building 1210 lobby (foyer) area, ensuring the area is free of lint, cobwebs, dust, dirt, and bugs.

• Exterior Cleaning:

  • Pressure wash exterior walls/fences of buildings 1210, 1212, and 1214 to remove dirt, mud, bugs, mildew, and mold.
  • Clean exterior windows of all buildings to remove grime, dirt, and debris, using low-pressure washing to prevent leaks or damage.
  • Clean exterior surfaces of all gutters and downspouts to maintain a professional appearance and prevent corrosion, removing dirt, dark streaks, biological growth, bird droppings, and atmospheric staining.
  • Pressure wash all sidewalk areas around buildings 1210, 1212, and 1214 (approximately 20,000 SF) to remove dirt, mud, bugs, mildew, and mold.

• Mechanical Yard:

  • Pressure wash exterior walls/fences to remove dirt, mud, bugs, mildew, and mold.

• Place of Performance: CONR-AFNORTH (1AF) Complex, Tyndall AFB, Florida.

• Period of Performance: This is a one-time cleaning service. Normal hours of operation are Monday-Friday, 0730-1630. Interior services may be performed on weekends with 48-hour notice. Exterior services may be performed on weekends or after normal hours.

• Hazardous Materials (HAZMAT): All chemicals must be approved by Tyndall AFB Environmental Flight. MSDS must be submitted. Spill prevention, containment, and disposal procedures must be followed.

• Government Property & Vegetation: Contractor is responsible for safeguarding government property and vegetation. Existing conditions must be documented with photographs. Any damage will be repaired/replaced at contractor's expense.

• Security: Personnel require a Local Files Check and must submit DD 1172 and Background Affidavits no later than 14 days prior to scheduled work. DBIDS cards are required for installation access.

• Chemicals: Use of chemicals must be approved by the Tyndall AFB Environmental Flight.

• Appendices: The PWS references numerous appendices for detailed information, including Acronyms and Definitions, Publications and Forms, Dimensions, Interior Drawings, Aerial Images, Gutter Blueprints, Sidewalk Highlights, Spigot Locations, and Downspout Locations.

Solicitation / RFP / RFQ

This solicitation seeks proposals for one-time cleaning services at the AFNORTH facility, specifically for the exterior and interior walls of buildings 1210, 1212, and 1214, including exterior windows, sidewalks, interior lobby and foyer areas, interior breezeway and hallway areas, and exterior gutters and downspouts. The Product Service Code is S201.

• Comprehensive management, labor, equipment, and materials for cleaning specified areas.

• Cleaning of exterior and interior walls of buildings 1210, 1212, and 1214.

• Cleaning of exterior windows of buildings 1210, 1212, and 1214.

• Cleaning of exterior sidewalks of the AFNORTH complex encompassing these buildings.

• Cleaning of interior lobby and foyer areas on the first and second floors of building 1210.

• Cleaning of interior breezeway and hallway areas in building 1214.

• Cleaning of exterior gutters and downspouts for buildings 1210, 1212, and 1214.

• Use of "soft wash" methods for exterior cleaning without damaging security cameras, electrical outlets, or windows.

• Safe cleaning of 28-foot high lobby fixtures.

• Submission of cleaning chemicals to the Tyndall AFB Environmental Flight for approval.

• Protection of surrounding government property and vegetation.

• Contract Type: Firm Fixed Price (FFP)

• Period of Performance: 60 Calendar Days from Date of Award (01 Jun 2026 to 31 Jul 2026)

• Estimated Value: Not explicitly stated, but NAICS size standard is $22,000,000.00.

• Offer Due Date: 20 May 2026, 12:00 PM local time.

• Proposal Submission: Two volumes required: Volume 1 - Price, and Volume 2 - Technical Approach.

  • Volume 1: No page limit.
  • Volume 2: Maximum 7 pages (excluding cover page and table of contents).

• Evaluation Factors: Price and Technical Approach.

• Technical Approach Evaluation: Will be rated acceptable if it demonstrates adequate approaches for high-reach/exterior execution, safety/HAZMAT plans, and a schedule for completion within 60 days of award. Merely restating PWS requirements will result in ineligibility.

• This acquisition is 100% set aside for Small Business.

• NAICS Code: 561720 (Exterminating and Pest Control Services) - Note: This appears to be a mismatch with the service description, which aligns more with building cleaning services.

• The solicitation incorporates FAR clauses by reference, including those related to payment requests via Wide Area WorkFlow (WAWF), instructions to offerors, and evaluation factors.

• Various attachments are listed, including drawings, a Material Safety Data Sheet, Wage Determination, and a Performance Work Statement (PWS).

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet titled "Question Worksheet, AFNORTH Cleaning Services." It is designed to facilitate the submission of questions from potential bidders regarding the AFNORTH Cleaning Services opportunity.

• The worksheet includes columns for:
  • PWS Paragraph Reference (If Applicable)
  • Reference Document (If Applicable)
  • QUESTION
  • RESPONSE (RESERVED FOR GOVERNMENT)
• It provides a structured format for bidders to clearly state their questions, providing as much information as possible.
• It also includes a note encouraging bidders to anticipate and include follow-on questions to ensure comprehensive answers.

This worksheet is a tool for bidders to formally ask clarifying questions about the solicitation or associated documents (like the PWS). Bidders should use this document to submit any questions they have to ensure all aspects of the opportunity are understood before preparing their proposals. The government will use the "RESPONSE" column to provide answers.

Questions & Answers / Clarifications

This document provides answers to questions submitted by industry regarding a requirement, likely related to an upcoming solicitation.

• Scope & Square Footage: The requirement includes cleaning approximately 48,845 sq ft of exterior building area across three buildings (1210, 1212, 1214), with maximum heights ranging from 28 to 44 ft. It also involves cleaning 13,818 sq ft of windows, 1,233 LF of gutters, 1,410 LF of downspouts, and pressure washing 20,000 sq ft of sidewalks. Four large light fixtures (approx. 4 ft diameter, 28 ft high) in Building 1210 require high-reach cleaning.
• Service Frequency: This is a one-time cleaning service.
• Specialized Services: High-reach cleaning for interior light fixtures, pressure washing of exterior walls and sidewalks, and gutter/downspout cleaning are required.
• Supplies & Equipment: The contractor must provide all labor, equipment, and materials. No government-furnished items will be provided.
• Work Hours: Normal hours are Monday-Friday, 0730-1630. Interior work can be done on weekends (0730-1630) with 48 hours' notice. Exterior work may be performed on weekends/after hours, but requires unescorted base access (7-10 day processing).
• Contract Award: This is expected to be a single award.
• Subcontracting: Permitted, with specific eligibility requirements for small business concerns as subcontractors (refer to FAR 19.703).
• Equipment: Contractors select their own equipment but are liable for any damage to government property.
• Property Protection: Contractors must protect government property (cameras, outlets, flooring, vegetation) and provide advance notice before covering security cameras.
• Chemical Use: All chemicals require approval from the Tyndall AFB Environmental Flight, and MSDS must be submitted.
• Water Source: The government will furnish water service for pressure washing.
• Environmental Controls: If non-biodegradable chemicals are used, a spill prevention, containment, and disposal plan is required. Vegetation must be safeguarded, and mitigation efforts stated.
• Bonds: Bid, performance, and payment bonds are not required for this commercial service requirement.

These clarifications provide specific details on the scope of work, required services, contractor responsibilities for equipment and supplies, work hour flexibility, and environmental considerations, which will be critical for bidders preparing their proposals.

Form / Attachment / Pricing Sheet

This document is a site plan indicating the locations of "working spigots" around Buildings 1210, 1212, and 1214. It also shows "retention ponds" and "Beacon Beach Road."

• Marked locations of "working spigots" with red asterisks.
• Labels for Buildings 1210, 1212, and 1214.
• Indication of "retention ponds."
• Label for "Beacon Beach Road."

This attachment provides a visual reference for the locations of existing spigots, which may be relevant for understanding the scope of work related to plumbing or maintenance tasks associated with the opportunity.

Forms / Attachments / Pricing Sheets

This document package contains three forms (Tyndall AFB IMT 81, 82, and 83) related to the management and reporting of hazardous materials and waste for contractors working at Tyndall Air Force Base.

• Tyndall AFB IMT 81 (Contractor's Hazardous Material Questionnaire): Used to determine if a contractor will use chemicals or generate hazardous waste during a contract. It requires information on the contractor, contract details, and a confirmation of chemical usage or waste generation.
• Tyndall AFB IMT 82 (Short-Term Contractor Hazardous Material Inventory): Requires contractors to inventory all hazardous materials they plan to use or store on base. It includes fields for product details, manufacturer, quantity, container type, and maximum on-site amounts. Material Safety Data Sheets (MSDS) must be attached.
• Tyndall AFB IMT 83 (Contractor Environmental Reporting Entry IMT): Used for monthly reporting of hazardous material usage and waste generation. It requires details on the contractor, contract, product, manufacturer, quantity used, and balance on hand.

Bidders responding to opportunities at Tyndall AFB may be required to complete and submit these forms as part of their proposal or upon contract award. Understanding these requirements is crucial for accurately estimating costs and ensuring compliance with environmental regulations. The forms outline the process for reporting chemical usage and waste generation, which is a key aspect of environmental compliance for contractors.

Form / Attachment / Pricing Sheet

This document appears to be a presentation file (PPTX) containing floor plans and room numbering for various buildings at Tyndall AFB, FL, specifically related to CONR-1AF (AFNORTH) HQ Phase I and Phase III projects. It serves as an attachment or reference material for bidders.

• Building 1210 (1st Floor): Lists numerous room numbers (e.g., 100, 120, 130, 140, 150, 190) and specific areas like 'BLDG 1210 (1st Floor)'.
• Building 1210 (2nd Floor): Lists numerous room numbers (e.g., 200, 210, 220, 230, 240, 250, 260) and specific areas like 'BLDG 1210 (2nd Floor)'.
• Building 1214: Lists room numbers (e.g., 120, 150, 160, 130, 110) and specific areas like 'BLDG 1214'.
• Project Context: Mentions 'CONR-1AF (AFNORTH) HQ Phase I' and 'Phase III'.
• Location: Tyndall AFB, FL.
• Update Date: 23 Jul 12.

This attachment provides detailed interior layouts and room designations for specific buildings at Tyndall AFB. Bidders involved in interior cleaning or related services for these facilities should use this document to understand the scope of work, identify specific areas requiring attention, and potentially estimate labor and material needs. It is crucial for understanding the physical environment where services will be performed.

Form / Attachment / Pricing Sheet

This document is an aerial image attachment, likely intended to provide visual context for a SAM.gov opportunity. It displays an overhead view of a facility labeled "1AF Headquarters" and includes surrounding grounds, parking areas, and outdoor displays of aircraft.

• Aerial perspective of buildings and grounds.
• Identification of "1AF Headquarters".
• Outdoor display of multiple aircraft.
• Parking lots and access roads.

This image may be relevant for bidders to understand the physical location and layout of a facility related to the opportunity. It could inform site visit planning, logistical considerations, or provide a general understanding of the operational environment if the opportunity involves services or work at this location.

Form / Attachment / Pricing Sheet

This document is a blueprint or diagram illustrating gutter locations and lengths for a facility. It appears to be an attachment to a larger solicitation or contract, providing specific details about the scope of work related to gutter systems.

• Gutter Lengths: The document specifies the linear footage (LF) of gutters for various sections of the buildings.
  • Building 1 (leftmost): 326 LF Gutter, 12 LF Gutter, 395 LF Gutter
  • Building 2 (middle): 370 LF Gutter
  • Building 3 (rightmost): Not explicitly labeled with a specific length, but implied to be part of the total.
• Total Length: The total gutter length across the depicted areas is stated as 1,233 LF.
• Visual Representation: Aerial imagery with red arrows and text overlays indicates the specific locations and measurements of the gutters on the building structures.

This attachment provides critical quantitative data for bidders to understand the scope of work for gutter installation, repair, or replacement. It allows for accurate material estimation, labor planning, and cost proposal development. Bidders should use this information to assess the scale of the gutter-related tasks required for the opportunity.

Form / Attachment / Pricing Sheet

This document is an attachment that visually identifies specific areas requiring pressure washing and provides an approximate square footage for the work.

• A site plan indicating the general layout of buildings and surrounding areas.
• Blue shaded areas on the plan highlight the locations designated for pressure washing.
• A handwritten note specifies "AREAS TO BE PRESSURE WASHED" and estimates the total area to be approximately "20,000 SQ. FT."

This attachment provides critical information for bidders to understand the scope of work related to pressure washing. It helps in estimating the labor, equipment, and materials needed, and in preparing a more accurate proposal for this specific task within the larger opportunity.

Other / Unclassified

This document is a U.S. Department of Labor Wage Determination (No. 2015-4559, Revision No. 31) for the Service Contract Act, applicable to Bay County, Florida. It lists various occupational classifications and their corresponding minimum hourly wage rates and fringe benefits required for federal contracts.

This document is crucial for bidders responding to federal solicitations that are subject to the Service Contract Act. It provides the legally mandated minimum wage rates and fringe benefits that must be paid to employees performing work under such contracts. Bidders must ensure their proposed labor costs align with these wage determinations to be compliant. The document also outlines:

• Occupational Classifications and Rates: A comprehensive list of job titles with corresponding minimum wage rates.
• Fringe Benefits: Details on required health and welfare benefits, including specific rates for regular and EO 13706 compliant benefits.
• Executive Orders: Information on Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage), and their applicability to federal contracts.
• Uniform Allowance: Requirements for contractors regarding the provision and maintenance of uniforms.
• Conformance Process: Procedures for classifying and determining wage rates for occupations not explicitly listed in the determination.

Bidders should carefully review this document to accurately estimate labor costs and ensure compliance with federal wage laws for any contract requiring these services.