DISA-PAC VIDEO WALL

Amendment / Modification

This amendment extends the deadline for solicitation responses.

• The required response date/time has been changed.

• The deadline for proposal responses is extended to Friday, May 29, 2026, at 10:00 AM HST.

Amendment / Modification

This amendment extends the deadline for solicitation responses.

• The required response date/time has been changed.

• The deadline for solicitation responses has been extended from May 15, 2026, at 10:00 AM HST to May 22, 2026, at 10:00 AM HST.

Amendment / Modification

• The deadline for solicitation responses has been extended.

• The original response date/time of May 13, 2026, 10:00 AM HST has been changed.

• The new deadline for proposal or quote submission is Friday, May 15, 2026, at 10:00 AM HST.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation HC101925R0007 for a DISA-PAC Video Wall.

• Sources: Up to 18 sources from the matrix switch will feed the wall.
• Mounts: Existing mounts will not be reused.
• Child Labor Clause: FAR 52.222-18 has been removed via Solicitation Amendment HC101925R0007-0003.
• PRC-Manufactured Items: Proposing PRC-manufactured IT products presents an unacceptable risk. Offerors intending to propose such items must address supply chain risk and mitigation strategies, referencing DFARS 252.239-7017 and PWS paragraph 13.h.
• Hawaii General Excise Tax (GET): Offerors are responsible for including all applicable Federal, State, and local taxes in their firm-fixed price proposal. The federal government does not provide exemptions for GET.
• Disposal of Existing Displays: Disposal should be via local Defense Logistics Agency Disposition Services (DLA-DS), as updated in PWS Subtask 1 (Paragraph 6.1.1).
• Presets/Layouts: The new video walls should support at least the current 8 presets/layouts.

This Q&A clarifies requirements and potential risks related to sourcing and taxes. It also directs offerors to specific amendments and PWS sections for further detail. No changes to due dates or submission rules are indicated in this document.

Amendment / Modification

This amendment (0003) to solicitation HC101925R0007 makes the following changes:

• Updated PWS Attachment: Includes an updated Product List and Price Quote Worksheet due to a manufacturer part number change. This change was also addressed in Question 54.

• PWS Paragraph Updates: Modifies PWS Paragraphs 6.1.1 and 6.2.

• Clause Removal: Removes FAR 52.222-18.

• Clause Addition: Adds FAR 52.246-2.

• PWS Attachment (Product List and Price Quote Worksheet)

• PWS Paragraphs 6.1.1 and 6.2

• FAR clauses

The proposal due date remains unchanged.

Form / Attachment / Pricing Sheet

This document is a "Price Quote Worksheet" intended for bidders to provide detailed pricing information for the opportunity. It outlines the Contract Line Item Numbers (CLINs) and requires a breakdown of costs, including materials, installation, travel, and warranty.

• CLINs:
  • 0001: MATERIAL AND EQUIPMENT
  • 0002: INCIDENTAL INSTALLATION
  • 0003: TRAVEL, SHIPPING, OTHER
  • 0004: INSTALLATION WARRANTY
• Required Breakdown for CLIN 0001 (Material & Equipment):
  • Specific items include an Indoor Video Wall (2 units), Quantum Ultra 610 (2 units), Four Output Boards (6 units), XTP Fiber Optic Transmitters (4 units), and various HDMI cables (3', 6', 9').
  • Bidders must propose manufacturers/brands and part numbers, or specify "Equal" with details.
• Additional Breakdowns Required:
  • Detailed breakdowns for CLINs 0002-0004.
  • Total firm-fixed price with a detailed breakdown of labor and Other Direct Costs (ODCs).
  • Fully loaded hourly labor rates for each category.
  • Detailed information on resources (labor categories, hours, number of employees, rates).
  • Specific details for all ODCs (quantity, part number, manufacturer).
  • Materials/equipment beyond CLIN 0001 items must be listed under ODCs (CLIN 0003).
  • Specific details for all travel (days, locations, personnel).
• Salient Characteristics: Provided for "Equal" products for the Daktronics NPN-6600-0.9MN video wall and Extron 60-1990-000518 video processor.

This worksheet is critical for preparing a compliant and competitive proposal. Bidders must use this format to detail their pricing, ensuring all required components and cost breakdowns are included as specified. Failure to provide the requested detail may impact proposal evaluation.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet containing a product list and salient characteristics for equivalent products. It is intended to provide bidders with specific details on the required equipment and their technical specifications, particularly for items where "Equal" products are permitted.

Product List Sheet:

• Lists specific items required, including proposed CLINs.
• Specifies "Brand Name (BN) or Equal?" status for each item.
• Details Manufacturer Name, Manufacturer Part Number, and Description.
• Includes Quantity (QTY) and Unit of Issue.
• Columns for Unit Price and Extended Amount are present but appear to be zero-filled in this instance.
• Other columns include warranty information, software license details, serial numbers, IUID information, contract details, customer organization, and delivery information.

Salient Characteristics Sheet:

• Provides detailed technical specifications for "Equal" products, specifically for Daktronics NPN-6600-0.9MN and Extron components.
• Includes specifications such as pixel configuration, dimensions, power consumption, color capacity, refresh rates, viewing angles, and operating temperatures for the video wall.
• For Extron components, it details resolution and refresh rate support, color bit depth, signal types, control interfaces, and power supply redundancy.

This attachment is crucial for bidders to understand the exact technical requirements for the opportunity. It clarifies which items must be Brand Name and which allow for equivalent products. The "Salient Characteristics" sheet is particularly important for bidders proposing alternative manufacturers, as it outlines the minimum acceptable performance and technical attributes for those items. Bidders must ensure their proposed "Equal" products meet or exceed these detailed specifications.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation # HC101925R0007 for the DISA-PAC VIDEO WALL.

• Set-Aside: The requirement remains set-aside for small businesses per FAR 52.219-6.
• Due Date: The due date is Wednesday, May 13, 2026, no later than 10:00 AM HST. No extension is currently available.
• Conduit/Raceway: No new conduit/raceways are needed; cables can run under the false floor, and existing conduits can be used but are not required.
• Mounting Surface: The mounting surface for displays is wood, as shown in drawings attached to "RFQ HC101925R0007 Q-A 1-8_4.24.26", posted on SAM.gov on April 24, 2026.
• Curved Walls: The approximate radius for the curved walls is R=60 feet for the East wall and R=59 feet for the West wall.
• Extron Source Code: The Extron source code will be available and accessible for modification.
• TAA Compliance: Refer to the response for question Q43, posted on May 1, 2026, for TAA compliance details.
• Part Number Update: The Extron Quantum Ultra video wall processor part number 60-1571-000025 has been updated to 60-1990-000518. The solicitation Product List and Price Quote Worksheet will be updated accordingly.

This Q&A document clarifies requirements and updates a specific part number. Bidders should review these clarifications to ensure their proposals accurately address the solicitation's needs. The due date remains unchanged at this time.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation HC101925R0007 for the DISA-PAC VIDEO WALL project.

• Qualifications/Licenses: No specific licenses are required, but manufacturer guidelines for installation and warranties must be followed. Interim or final SECRET clearance requirements are detailed in the PWS.
• Payment Method: Payment will be electronic via Wide Area WorkFlow (WAWF), generally Net30, in accordance with the Prompt Payment Act.
• Ceiling Budget: Not provided. Award will be made to the responsible Offeror whose offer is most advantageous to the Government, using a Lowest Price Technically Acceptable (LPTA) evaluation process.
• Liquidated Damages: FAR 52.211-11 is not included.
• Taxes: Offers should include taxes as applicable.
• Insurance: No specific insurance requirements are stated.
• Bonds: Bid bonds, payment bonds, or performance bonds are not required.
• Maintenance: No recurring maintenance is required.
• Remote Access: Remote access to the AV system is not permitted.
• Electrical Work: No electrical work is required; remote power modules will be used with existing building UPS.
• Post-Demolition Work: No required post-demolition finish work is anticipated, as the new video wall is similar in size to the existing one. Disassembly/disposal is the contractor's responsibility. Any damage or required post-demolition work is also the contractor's responsibility.
• Parking: No dedicated parking will be provided for the contractor.
• Equipment Delivery: Delivery directly to the site is prohibited (FOB: Destination). Contractors must bring equipment to the site during the installation phase. Pre-staging may be discussed with the Government POC, but on-site storage is very limited.
• On-site Storage: While the facility is secure, on-site storage space is very limited. Contractors should plan to bring equipment as needed and may use a contractor-provided lock box for tools if security is a concern. Spare parts cannot be stored on-site.
• TAA Compliance: FAR 52.225-5 does not apply; the Trade Agreements subpart of the FAR does not apply to this requirement per FAR 25.401(a)(1). DFARS 252.239-7017 and the Supply Chain Risk Management section of the PWS apply.
• Mounting Surface: The video wall will be mounted directly to a flat and continuous concave wall surface.

These clarifications address specific requirements, submission details, and technical aspects, impacting how bidders should prepare their proposals and technical solutions. Bidders should review these responses carefully to ensure their proposals meet all clarified requirements.

Amendment / Modification

This amendment (0002) modifies Solicitation HC101925R0007.

Key changes include:

• NAICS Code Update: The NAICS code for CLINs 0001, 0002, and 0003 has been changed from 334310 to 334220.

• Size Code Update: The standard size code has been changed from 750 to 1,250.

• Question Submission Cut-off: The deadline for submitting questions is now 06 MAY 2026 at 10:00 a.m. HST.

• NMR Class Waiver: The requirement under NAICS 334220 is covered by a class waiver of the Non-Manufacturer Rule (NMR). A link to the class waiver is provided.

• Solicitation/Contract Form (Size Code)

• Supplies or Services and Prices (NAICS Code for CLINs 0001, 0002, 0003)

• NMR Class Waiver List

• The deadline for submitting questions has been extended.

• Bidders should note the updated NAICS code and the applicability of the NMR class waiver.

Amendment / Modification

• The due date for responses has been extended.

• Solicitation/Contract Form (SF 1449)

• The required response date/time has changed from May 6, 2026, 10:00 AM to May 13, 2026, 10:00 AM HST.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation HC101925R0007 for the DISA-PAC VIDEO WALL.

• Wall Replacement: The project involves replacing existing LCD Panel walls, not installing new ones.
• Power Requirements: Contractor-provided remote power modules are required from the equipment room to the wall locations, as per PWS Paragraph 6.1.2.
• Equipment Location: Existing equipment cabinets are in a comm room behind each wall. As-Built drawings for the current system are not available.
• Matrix Switch Capacity: The existing matrix switches have capacity for the requested output boards. Five output boards will replace existing fiber output boards, and one will be a spare.
• Fiber Optic Transmitters: Two Fiber Optic Transmitters will be connected to Quantum outputs, and two will be for spares. The Quantum and transmitter will be installed in the same equipment room.

A 7-day extension has been granted, with the adjusted due date to 13 May 2026, as noted in Amendment 0001.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding RFQ HC101925R0007 for the DISA-PAC VIDEO WALL.

• Non-Manufacturer Rule Waiver: The solicitation includes a "NMR CLASS WAIVER LIST" on page 24, which waives the Non-Manufacturer Rule.
• Video Wall Replacement: The project involves replacing existing LCD Panel walls with new LED video walls.
• Power Requirements: Remote power needs to be extended from the equipment room to the wall locations.
• Equipment Location: Existing equipment cabinets are located in a comm room behind each wall.
• As-Built Drawings: Current As-Built drawings are not available and will not be updated due to a future tech refresh of the back-end A/V system.
• Matrix Switch Capacity: The existing matrix switches have capacity for the requested five new output boards and one spare.
• Fiber Optic Transmitters: Two Quantums will be installed in the main equipment room (Room 228) to extend HDMI to the video wall processor (Room 237). Two Fiber Optic Transmitters will be connected to the Quantum outputs, with two serving as spares. The Quantum and transmitter will be in the same equipment room.

A 7-day extension has been granted, with the adjusted due date now set for 13 May 2026.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation HC101925R0007 for DISA-PAC VIDEO WALL services.

• New Requirement: This is a new requirement, not a continuation of an incumbent contract.
• Site Visit: There is no scheduled site visit for this solicitation.
• Mounting Surfaces: Existing mounting surfaces and structural support for the new video walls are detailed in the attached drawing, "AV Wall Drawing".
• Cable Pathway: Cable pathways are feasible due to a raised floor, allowing cables to be run underneath.
• Control System: The current control system is AMX and will be replaced by an Extron system. The Extron control system equipment will be installed in the "Storage" room (Section D-1) as per the attached drawing (Sheet 35, A-110).

This Q&A document clarifies key aspects of the solicitation, including the nature of the requirement and technical details related to installation and existing infrastructure. Bidders should review the referenced drawings and the solicitation (PWS) for further details.

Form / Attachment / Pricing Sheet

This document is a "Price Quote Worksheet" (Excel file) intended for bidders to provide detailed pricing information for the opportunity. It outlines the CLINs (Contract Line Item Numbers) and requires a breakdown of costs, particularly for CLIN 0001 (Material and Equipment) and other CLINs (0002-0004).

• CLINs: Includes CLIN 0001 (MATERIAL AND EQUIPMENT), CLIN 0002 (INCIDENTAL INSTALLATION), CLIN 0003 (TRAVEL, SHIPPING, OTHER), and CLIN 0004 (INSTALLATION WARRANTY).
• CLIN 0001 Breakdown: Requires specific details for items including quantity, unit of measure, unit price, extended price, proposed manufacturer/brand, and part number. It lists seven specific items related to a video wall system, with Daktronics and Extron identified as potential manufacturers.
• Additional Breakdowns: Bidders must propose breakdowns for CLINs 0002-0004, including a total firm-fixed price and detailed breakdowns of labor and other direct costs (ODCs).
• Labor Details: Fully loaded hourly rates for each labor category, labor hours, and number of employees are required.
• ODC Details: Specific details for ODCs, such as quantity, part number, and manufacturer, are necessary.
• Materials/Equipment: Any materials/equipment beyond the seven listed items for CLIN 0001 must be broken down under CLIN 0003.
• Travel Details: Specifics on travel, if applicable, such as number of days, locations, and personnel, are required.
• Salient Characteristics: A separate sheet provides salient characteristics for equivalent products, referencing specific Daktronics and Extron part numbers.

This worksheet is critical for bidders to structure their pricing proposals accurately. It dictates the level of detail required for material, labor, and other direct costs, ensuring compliance with solicitation requirements and facilitating evaluation. Bidders must carefully populate this worksheet, providing all requested information for both specified and additional items, and ensuring proposed manufacturers/part numbers meet or exceed the salient characteristics provided.

Solicitation / RFP / RFQ

This solicitation, HC101925R0007, is for a "Defense Network Center Pacific (DNC PAC) Video Wall Tech Refresh." The objective is to procure two new video walls and two new video processors, along with associated A/V equipment and cabling, for DISA PAC at Ford Island, Hawaii. The existing video walls have reached their end of life/service, and this refresh is necessary to ensure the audio/video (A/V) system remains fully operational.

• Procurement of two new video walls and two new video processors.

• Removal and disposal of existing video walls.

• Installation of new video walls, video processors, and associated cabling.

• Labeling of all new cabling.

• Assistance with programming of the control system.

• Testing and checkout of the video walls and A/V system.

• Provision of a 12-month warranty on the system and installation.

• The contractor must provide interim or final SECRET clearance for personnel performing on-site work.

• Products must meet salient characteristics and brand name specifications in the attached Product List.

• Video walls must support up to 18 inputs in HDMI format supporting up to 4K.

• Contractor must provide remote power modules and remote video modules for video walls.

• Installation and warranty support includes 8x5 telephone helpdesk and remote engineering support during standard federal government business hours (7:00 a.m. to 3:30 p.m. HST).

• On-site response time within 8 business hours is required for trouble calls.

• Contractor must maintain an inventory of spare parts (15% Video Modules, 10% Other Parts) stored off-site.

• Contract Type: Not explicitly stated, but implied to be a fixed-price contract for commercial items.

• Period of Performance: 12 months from Date of Contract Award for installation. The installation warranty is valid for one (1) year after Government acceptance.

• Estimated Value: Not stated in the provided pages.

• Offer Due Date: 10:00 AM 06 May 2026.

• Proposals will be evaluated using a Lowest Price Technically Acceptable (LPTA) process.

• Technical/Management Approach and Price Quote are required.

• Technical/Management Approach is limited to 10 pages.

• Proposals must address all aspects of the PWS and meet Section 508 Accessibility Standards.

• Evaluation factors include Technical/Management Approach (Subfactors: Tech Refresh, Warranty) and Price.

• Subfactors 1 and 2 of the Technical/Management Approach will be rated Acceptable or Unacceptable.

• Past performance is not an evaluation factor but will be used for determining contractor responsibility.

• This acquisition is set aside for Small Business.

• NAICS Code: 334310, Size Standard: 750.

• The solicitation incorporates FAR 52.212-1, 52.212-3, and 52.212-4 by reference. FAR 52.212-5 is attached.

• Electronic submission of offers is required.

• Specific clauses and provisions are incorporated by reference and full text, including those related to supply chain risk, unique item identification, and Section 508 accessibility standards.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the Quality Assurance Surveillance Plan (QASP) for the "DNC PAC Video Wall Tech Refresh" contract. Its purpose is to provide a systematic method for evaluating contractor performance.

This QASP details:

• What aspects of performance will be monitored.

• The methods for monitoring.

• Who will conduct the monitoring.

• How monitoring efforts and results will be documented. It does not detail how the contractor accomplishes the work, but rather focuses on the Government's oversight of performance against contract terms.

• Task 1 (DNC PAC Video Wall Tech Refresh): Performance must occur with no required re-performance or re-work at least 80% of the time. Problems that occur must be minor and resolved satisfactorily. Upon completion of all subtasks, all video wall components must function 100% in the system.

• Task 2 (Installation Warranty): 8x5 telephone support must be provided between 7:00 a.m. to 3:30 p.m. HST, and on-site support with proper replacement parts must be provided within 8 business hours at least 95% of the time.

Not explicitly detailed in this document, but implied to cover the "DNC PAC Video Wall Tech Refresh" contract.

• The QASP is a "living document" and subject to Government review and revision.
• Surveillance activities will be overseen by the Contracting Officer (KO) and the Mission Partner Point of Contact (MP POC).
• The MP POC is responsible for technical oversight and using the QASP to conduct surveillance, reporting performance issues to the KO.
• Surveillance methods include 100% inspection (for specific tasks) and routine/periodic inspections (weekly, monthly, quarterly, etc.).
• Customer input is considered a valuable supplement to surveillance.
• Performance ratings (Exceptional, Very Good, Satisfactory, Marginal, Unsatisfactory) will be used, aligning with CPAR ratings.
• Appendices include templates for Performance Assessment Reports (PAR), Customer Complaint Records, and Corrective Action Reports (CAR).

Other / Unclassified

This document is a "Justification for Other Than Full and Open Competition (OTFAOC)" related to the "Defense Network Center-Pacific (DNC PAC) Video Wall Tech Refresh" procurement. It outlines the rationale for limiting the competition for specific IT products.

This document is relevant to potential bidders as it explains why the procurement is being conducted under a limited source justification. Key points include:

• Procurement Details: The action involves procuring two (2) video walls, two (2) video processors, and associated cabling for installation in the DNC PAC. The estimated value is not explicitly stated but is supported by FAR Part 12 and FAR Part 15.
• Brand Name Limitation: Two specific IT products, the "Four Output Board, HDMI 4K/60 with Stereo Audio" (part number 70-1113-01) and the "XTP Fiber Optic Transmitter for HDMI, Multimode" (part number 60-1276-11), are limited to a specific brand-name manufacturer (Extron). This limitation is due to the need for full compatibility and interoperability with existing Extron matrix switches.
• Justification: Replacing the existing Extron matrix switch is deemed cost-prohibitive and unnecessary. Failure to use Extron brand components would render the new video wall system useless and pose a risk to the Department of Defense's ability to oversee and manage the network.
• Competition: The requirement is solicited as a 100% small business set-aside, with a limitation of sources for the two specified IT products. FAR Subpart 13.5 procedures will be used, and the government anticipates multiple offers.
• Market Research: Market research conducted in June-July 2024 determined that multiple small businesses can fulfill the requirements, including providing the specified Extron brand IT products.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet containing a product list and salient characteristics for equivalent products, intended to detail specific hardware components required for an opportunity. Bidders should use this information to identify and source compliant products.

Product List Sheet:

• Lists items with proposed CLINs, Brand Name (BN) or Equal designation, Manufacturer Name, Manufacturer Part Number, Description, Quantity (QTY), Unit of Issue (EA), and Unit Price (set to 0.0 in this attachment).
• Includes specific items such as:
  • Indoor Video Wall (Daktronics NPN-6600-0.9MN)
  • Quantum Ultra 610 (Extron 60-1571-000025)
  • Four Output Board, HDMI 4K/60 (Extron 70-1113-01)
  • XTP Fiber Optic Transmitter for HDMI (Extron 60-1276-11)
  • 4K Premium High Speed HDMI Ultra-Flexible Cables (various lengths)

Salient Characteristics Sheet:

• Provides detailed technical specifications for equivalent products, particularly for the Daktronics video wall and Extron components.
• Includes specifications such as pixel configuration, dimensions, power consumption, refresh rates, viewing angles, and connectivity options.

This attachment is crucial for bidders to understand the exact technical specifications and potential equivalent products required. It directly informs product sourcing, technical proposal development, and pricing strategies. Bidders must ensure their proposed solutions meet or exceed these detailed requirements.