F35 SPECIAL ACCESS PROGRAM FACILITY (SAPF)

Amendment / Modification

This document is Amendment 0004 to Solicitation W9127S25RA001, specifically for Section 11 14 00 (Pedestrian Control Equipment).

• Section 1.1 REFERENCES: Updates to ASTM standards are noted, specifically ASTM A240/A240M and ASTM A666, both updated to the 2023 versions.
• Section 1.4 SUBMITTALS: Clarifies that submittals with a "G" designation require government approval, and those without are for information only. It also specifies the submission of SD-03 Product Data and a Sample Warranty (G, AE).
• Section 2.2 MATERIALS: Specifies that stainless steel materials must conform to ASTM A240/A240M and ASTM A666 standards.
• Section 2.3 MANUFACTURED UNITS: Details requirements for Full Height Turnstiles, including pedestrian clearance (38 inches minimum), width (84 inches maximum), depth (75 inches minimum), and passage height (84 inches minimum).
• Section 2.5 FULL HEIGHT TURNSTILE COMPONENTS: Outlines specifications for portal and housing (304 stainless steel, welded, lockable), blade rotor assembly (three blades, 11 straight crossbars each, 304 stainless steel), enclosure assembly (welded 304 stainless steel tubing), and barrier (11 straight crossbars, 304 stainless steel).
• Section 2.7 EQUIPMENT: Specifies turnstile requirements including bi-directional electric operation, auto-indexing, integration with access control systems, sealed bearings, preparation for card reader activation, and red/green indicator lights.
• Section 2.8 OPERATION: Details the locking/unlocking mechanism (24 VDC system), fail-lock in entry direction, mechanical key release, automatic re-locking after passage, and mean cycle between failures (4 million cycles minimum).
• Section 3.1 EXAMINATION: Requires examination of openings for ADA accessible turnstiles to ensure they meet manufacturer's tolerances and are ready for installation.
• Section 3.3 INSTALLATION: Includes requirements for setting units level, plumb, and true, installing enclosure panels, completing electrical and control connections, and fitting/aligning assemblies.
• Section 3.6 TRAINING: Mandates that the manufacturer's representative provide training on the operation of all systems associated with the turnstiles.

This amendment provides detailed technical specifications for pedestrian control equipment (turnstiles). Bidders should review these updated specifications to ensure their proposals accurately reflect the required materials, components, fabrication, installation, and operational requirements. No changes to submission deadlines or evaluation factors are explicitly mentioned in this amendment, but the detailed technical requirements may impact proposal content and pricing.

Amendment / Modification

This amendment, "SOLICITATION AMENDMENT 0004-ALL DRAWINGS.pdf", provides all drawings related to the solicitation. The amendment includes:

• Sheet A-703.1: "PRELIMINARY EMBELLISHMENT SCHEDULE"
• Sheet LP110.1: "MASTER PLANT SCHEDULE - BASE BID (SEE SHEETS LP110.1-LP112.1)"
• Sheet LP112.1: "PLANT SCHEDULE - AREA 2 BID OPTION"
• Sheet LP113.1: "PLANT SCHEDULE - AREA 3 BID OPTION"
• Sheet LP116.1: "PLANT SCHEDULE - AREA 6 BID"
• Sheet LP500.1: "TREE SECTION TABLE" and "PLANTER DETAIL"

This amendment introduces a comprehensive set of drawings that are essential for understanding the full scope of the project, including landscaping, planting schedules, and specific details for various bid options and areas.

Bidders should review all provided drawings to ensure a complete understanding of the project requirements before submitting their proposals. These drawings are critical for accurate bidding and proposal development.

Amendment / Modification

This document is Amendment 0004 to Solicitation W9127S25RA001, specifically for Section 09 06 00, Schedules for Finishes, dated 08/22.

This amendment details the color schedules for various exterior and interior finishes of the F-35 Special Access Program Facility (SAPF).

Exterior Finishes:

• Exterior Walls: Specifies colors for brick (including "Flying Razorback Blend" with specific color percentages), metal soffit panels, metal fascia panels, mortar, metal wall panels, hardware, trim, glass, glazing, and paint.
• Exterior Trim: Details colors for steel doors and frames, aluminum doors and frames, aluminum windows, downspouts, conductor boxes, louvers, flashings, coping, caulking, sealants, bollards, signage, and control joints.
• Exterior Roof: Outlines colors for PVC (White) and penetrations, to match roof color.

Interior Finishes:

• Interior Floor Finishes: Specifies colors for carpet tile, luxury vinyl tile, static-control resilient flooring, aluminum transitions, entrance mats, concrete (sealed and polished), and industrial floor coating.
• Interior Base Finishes: Details colors for resilient base and moldings, and integral cove base.
• Interior Wall Finishes: Lists colors for paint, ceramic tile, grout, wood panels, exposed structural columns, and acoustical tile and grid.
• Interior Ceiling Finishes: Specifies paint colors for ceilings, soffits, metal deck, structural framing, and interior trim (steel doors, frames, aluminum doors, frames, windows, wood doors, fire extinguisher cabinets, ladders, exposed ductwork).
• Interior Window Treatment: Outlines colors for window shades.
• Interior Miscellaneous: Includes colors for toilet partitions, urinal screens, casework, plastic laminate, solid surfacing material, window sills, acoustical wall panels, corner guards, protective wall covering/panel, signage message and background colors, building directory, lockers, benches, shower curtains, shower wall kits, electrical device cover plates, vinyl wallcovering, and upholstery fabric.

This amendment provides detailed color specifications that bidders must adhere to for the specified finishes. Bidders should ensure their proposals and material selections align with these detailed color requirements.

Amendment / Modification

This amendment (0004) to Solicitation W9127S25RA001, dated 10 DEC 2025, is issued to include the following attachments:

• SOLICITATION AMENDMENT 0004 - 09 06 00
• SOLICITATION AMENDMENT 0004 - ALL DRAWINGS
• SOLICITATION AMENDMENT 0004 - Cover Letter
• SOLICITATION AMENDMENT 0004 - 11 14 00

This amendment pertains to amendments of solicitations. The original solicitation's hour and date for receipt of offers is extended. Bidders must acknowledge receipt of this amendment.

This amendment extends the hour and date specified for receipt of offers. Failure to acknowledge receipt of this amendment prior to the specified time may result in rejection of the offer. If a bidder desires to change an offer already submitted, the change must be made via letter or electronic communication referencing the solicitation and this amendment, and received prior to the opening hour and date specified.

Amendment / Modification

This document transmits revised documents as part of Amendment 0004 to address bidder inquiries for the F-35: Special Access Program Facility project. The revisions include updates to specifications and drawings.

Specifications:

• 09 06 00 - SCHEDULES FOR FINISHES: Edited tile product names to align with the revised finish legend.
• 11 14 00 - PEDESTRIAN CONTROL EQUIPMENT: Edited requirements for the turnstile based on bidder inquiry.

Drawings:

• A-703.1 - ROOM FINISH LEGEND: Revised finish legend in response to bidder inquiry.
• LP110.1 - LANDSCAPE PLANTING PLAN: Revised plant quantity in response to bidder inquiry.
• LP112.1 - LANDSCAPE PLANTING PLAN: Added detention basin detail in response to bidder inquiry.
• LP113.1 - LANDSCAPE PLANTING PLAN: Revised plant quantity in response to bidder inquiry.
• LP116.1 - LANDSCAPE PLANTING PLAN: Revised plant quantity in response to bidder inquiry.
• LP503.1 - LANDSCAPE DETAILS: Added detention basin detail in response to bidder inquiry.

This amendment provides clarifications and revisions based on bidder inquiries. Bidders should review these updated specifications and drawings to ensure their proposals accurately reflect the latest requirements. No specific impact on proposal deadlines is mentioned in this cover letter.