Mechanical Repairs Bldg TT113 CDC

Solicitation / RFP / RFQ

This solicitation details technical specifications and environmental assessments for Project 23-0044, concerning mechanical repairs to Building TT113 at MCB Camp Lejeune, NC. The project involves comprehensive upgrades to mechanical, electrical, plumbing (MEP), and site utilities.

• HVAC Systems: Installation of vapor compression water chillers, low-pressure water heating boilers, Dedicated Outdoor Air Systems (DOAS), and decentralized unitary HVAC equipment.

• Instrumentation & Controls: Implementation of a networked Direct Digital Control (DDC) system using BACnet MS/TP protocols, including cybersecurity measures for control systems.

• Plumbing & Utilities: Upgrades to domestic water, sanitary sewerage, and exterior buried preinsulated water piping, including water heaters and backflow preventers.

• Electrical & Communications: Interior electrical distribution, LED lighting, lightning protection, and a complete building telecommunications cabling system.

• Fire Protection: Installation of an addressable interior fire alarm and mass notification system compatible with existing Simplex equipment.

• Site Work: Earthwork, soil characterization, and sodding for disturbed areas.

• Asbestos & Lead: Assessments in August 2024 found no asbestos-containing materials (ACMs) or lead-based paint (LBP).

• Mold: No visible mold or moisture was observed.

• Termites: Final inspection found no evidence of wood-destroying insect infestation.

• Adherence to the "Camp Lejeune Contractor Environmental Guide" and ESOP 5090.10.2 for environmental media screening and PFAS management.

• Compliance with industry standards including NFPA, ASME, ASTM, and TIA/EIA.

• The government reserves the first right of refusal for any merchantable timber removed during site work.

• Contractors must perform mechanical screening of all surplus soil before it leaves the originating site.

• A "Submittal Register" (SD-01 through SD-11) outlines all required submittals, including preconstruction documents, shop drawings, product data, test reports, certifications, manufacturer's instructions, O&M data, and closeout submittals. This register is crucial for bidders to ensure timely and accurate submission of all required documentation.

Form / Attachment / Pricing Sheet

This document contains the "Mechanical Repairs Building TT113" drawings for the project at Tarawa Terrace, Marine Corps Base Camp Lejeune. It includes various architectural, structural, electrical, mechanical, plumbing, fire protection, and civil engineering drawings.

• Title Sheet and Index of Drawings (G-001): Provides an overview and index of all drawing sheets.
• Life Safety Notes and Legend (G-001): Details applicable building codes, occupancy classifications, fire protection systems, construction types, allowable area and height, occupant loads, travel distances, exit capacities, and fire resistance ratings.
• Code Compliance Site Plan (G-002): Illustrates the project site with code compliance information.
• Site Plans (CD101, CS101, CG101, CU101): Show existing conditions, new work, site grading, and utilities.
• Mechanical Repairs Building TT113 Drawings (Various Sheets): Includes detailed drawings for structural, mechanical, plumbing, electrical, fire protection, and interior finishes.
• Demolition Plans (AD101, AD103, AD104, ED101, ED102, MD101-MD109, MP101-MP107, FP101): Detail existing conditions and elements to be demolished.
• Construction Plans (AD101, AD201, A-101-A-111, A-201, A-301, A-401, A-501-A-503, E-101-E-105, M-101-M-108, M-301-M-303, M-501-M-506, M-701-M-706, P-101, P-201, E-501-E-503, FP001, FP101): Detail new construction and installations.
• Schedules (E-601-E-604, M-601-M-603): Provide detailed information on electrical and mechanical equipment, including fan coil units, boilers, pumps, and lighting fixtures.
• Details (Various Sheets): Provide specific construction details for various components and assemblies.

This comprehensive set of drawings is crucial for bidders to understand the full scope of work, including demolition, new construction, and specific requirements for mechanical, electrical, plumbing, structural, fire protection, and civil systems. It details the existing conditions, proposed modifications, and specific construction methods and materials required for the "Mechanical Repairs Building TT113" project.

Form / Attachment / Pricing Sheet

This document is an Asbestos, Lead Paint, and Mold Assessment report for Building TT-113 at Tarawa Terrace II Child Development Center, Camp Lejeune, North Carolina. It was commissioned by MBF Architects PA and conducted by ECS Southeast, LLC.

• Asbestos Survey: Twenty-three bulk samples were analyzed. No asbestos was detected in any of the tested materials.
• Lead Paint Survey: Paint chip samples were collected and analyzed. Lead was not detected above the laboratory detection limit in any of the samples.
• Mold Assessment: No visible mold or moisture was observed during the assessment. However, it was noted that ceiling tiles had been replaced due to HVAC condensation.
• Recommendations: If suspect materials are discovered during construction, they should be presumed to contain asbestos and handled accordingly. Otherwise, no specific remediation is recommended based on the findings.

This report provides critical environmental assessment data for Building TT-113, which is slated for interior and exterior renovations. Bidders involved in renovation or construction activities at this facility should be aware of these findings to ensure compliance with safety and environmental regulations. Specifically, the absence of detected asbestos and lead paint simplifies renovation planning, but the report also advises caution regarding potential concealed materials.

Forms / Attachments / Pricing Sheets

This document is a Structural Interior Design Package (Final Submittal) for TT113 Mechanical Repairs at Marine Corps Base, Camp Lejeune, NC. It details the interior design objectives, meeting minutes from review sessions, and a comprehensive list of proposed finishes, including plans, schedules, and visual examples.

• Point of Contact List: Provides contact information for key personnel from various organizations involved in the project.
• SID Narrative: Outlines interior design criteria, including compliance with Navy and Marine Corps codes and standards, and describes the objectives for interior finishes, focusing on aesthetics, sustainability, and durability.
• Meeting Minutes: Summarizes discussions and decisions from the 35% and 65% Review Meetings, addressing specific design items, material selections, and action items.
• Finish Plans & Schedules: Includes detailed room finish schedules, a finish legend, and specific details for various finishes like acoustical ceiling tiles, carpet tiles, luxury vinyl tile, paint, rubber base, solid surface countertops, plastic laminate casework, and window shades.
• Finish Boards: Provides visual representations of selected interior finishes.

This document is crucial for bidders to understand the specific interior design requirements, material selections, and aesthetic goals for the TT113 Mechanical Repairs project. It details the types of finishes to be used in various areas, which will inform material procurement, installation planning, and overall project execution. The meeting minutes also highlight key decisions and potential areas of clarification that bidders should be aware of.

Form / Attachment / Pricing Sheet

This document is a "NORTH CAROLINA WOOD-DESTROYING INSECT INFORMATION REPORT" (WDIR 100) completed by Terminix, a pest control operator. It serves as a record of a visual, non-destructive inspection of readily accessible areas of a property for visible termite infestation and/or damage. It is intended to inform potential buyers or stakeholders about the presence or absence of wood-destroying insects and related conditions.

• Property Information: Includes address, square footage, year built, and type of foundation.
• Inspection Findings: Details whether visible evidence of subterranean termites, powder post beetles, old house borers, or other wood-destroying insects was found. It also notes if control measures were performed or if there was evidence of previously treated or inactive infestations.
• Obstructed/Inaccessible Areas: Lists areas that could not be inspected due to obstructions like stored items, insulation, or finished surfaces.
• Conditions Conducive to Termites: Notes any conditions observed that may encourage termite activity (e.g., moisture).
• Inspection Graph: A diagram of the property showing "hazard" locations and key evidence symbols (e.g., active termites, wood decay fungus, moisture).
• Terms and Conditions: Outlines the limitations of the inspection, stating it is visual, non-destructive, and does not guarantee the absence of hidden damage or future infestations.

This report is crucial for bidders to understand the current condition of the property regarding wood-destroying insects. It highlights potential risks, existing damage, or past treatments, which could impact the scope of work, required repairs, or overall cost of a project related to this property. Bidders should pay close attention to any noted infestations, damage, or conducive conditions, as these may require remediation or structural repairs.

Other / Unclassified

This document is a "Basis of Design" report for the "Mechanical Repairs Building TT113" at the United States Marine Corps Base, Camp Lejeune, North Carolina. It details the design criteria, scope of work, and specific considerations for various engineering disciplines including architectural, site/civil, structural, fire protection, plumbing, mechanical, electrical, telecommunications, and interior design.

Key aspects include:

• Renovation of the existing 31,664 sq. ft. Child Development Center (Building TT113).
• Construction of a new mechanical building and yard.
• Replacement of the existing HVAC system with a new 4-pipe chilled water / hot water system.
• Upgrades to exterior and interior elements, including roofing, siding, ceilings, lighting, and flooring.
• Compliance with numerous DoD criteria, building codes, and standards (e.g., IBC, ASHRAE, UFC).
• Consideration for High Performance and Sustainable Building (HPSB) requirements.
• Hazardous material testing indicating no lead, asbestos, or mold.

This document provides detailed technical specifications and design parameters for the renovation and construction project. Bidders can use this information to understand the scope of work, the technical requirements, the materials and systems to be used, and the governing codes and standards. This forms the basis for developing proposals, estimating costs, and understanding the project's technical complexity.

Form / Attachment / Pricing Sheet

This document, Appendix D: Building Information Checklist, serves as a checklist for required information to be entered into a real property database. It is intended to provide detailed information for each Real Property Facility listed on the DD Form 1354, facilitating easy data entry into the real property system.

This checklist covers:

• Building Identification: Facility Number, Building Name, Number of Floors, Gross SF, Net SF.
• Building Dimensions and Construction Materials: Outside dimensions (length, width), basement, attic, porches, roof, foundation details, ceiling heights, door dimensions, fire rating code, and construction materials (principal structural, secondary structural, exterior/interior walls, floor/sub-floor materials).
• Additional Construction Materials: Foundation form, roof support, roof deck, roof surface, and pavement materials.
• Utility Connections, Information and Fuel Data: Details on water, gas, sewer, storm sewer, steam, condensate, and communications connections, including number of pipes, diameter, capacity, and availability. It also details heating, air conditioning, hot water, and electrical systems, including energy type, source location, fuel description, air circulation, and electrical load data.
• Building Systems: Fire protection (sprinklers, detection, alarms), security, heating (plant, fuel storage), and air conditioning systems.
• Installed Building Equipment: Specific equipment such as evaporative coolers, water heaters, exhaust fans, wash basins, water closets, urinals, sinks, drinking fountains, heating plants, elevators, and other specified items like air curtains and exhaust hoods.
• Associated Utilities and Structures: Checklist for items like transformers, power poles, lighting, gas mains, sewers, hydrants, driveways, roadways, parking, drains, fences, sidewalks, and water/backflow preventer services.

This document provides detailed specifications and characteristics of a facility. Bidders may need to reference this information to understand the existing conditions, infrastructure, and installed equipment of a property relevant to a potential contract. It can inform proposals related to maintenance, repair, renovation, or operation of the facility by detailing its physical attributes and systems.

Solicitation / RFP / RFQ

This solicitation is for Mechanical Repairs at Bldg TT113 CDC, MCB Camp Lejeune, North Carolina. The project number is 23-0044 and the solicitation number is N40085-26-R-9010.

• The project involves building construction, excluding single-family homes or apartments up to and including 4 stories.

• Contract completion is expected within 720 days after award.

• Special scheduling requirements include a CDC outage limited to 18 months, construction commencement no earlier than 6 months after award, and the need for climate-controlled storage and relocation of CDC materials.

• Construction equipment and materials must be onsite before construction begins.

• The project specifications and drawings are available as attachments on SAM.gov.

• Estimated Cost Range: Between $10,000,000 and $25,000,000.

• Wage Determination: General Decision Number NC20260010 dated 01/02/2026.

• Liquidated Damages: $880 per Calendar Day.

• Basis for Award: Lowest Price.

• Proposal Due Date: March 6, 2026, at 3:00 PM EST.

• Proposals should be submitted via email to clifton.l.gaither.civ@us.navy.mil and lauren.f.loconto.civ@us.navy.mil.

• Requests for Information (RFIs) must be submitted by February 19, 2026, by 3:00 PM EST to clifton.l.gaither.civ@us.navy.mil.

• Proposal Acceptance Period: 60 days from receipt of offers.

• A site visit will be scheduled via amendment.

• The solicitation includes the "Buy American Requirement-Construction Materials" provision (FAR clause 52.225-9).

• Only the following contractors are eligible to submit a proposal: Mechworks Mechanical Contractors, Inc.; North State Mechanical, Inc.; and R&W Construction Company, Inc.

• Offerors are advised that funding may not become available, and no award will be made if funds are not available. Offerors will not be reimbursed for any effort or proposal costs.

• Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (minimum wage) may apply.

• Bond requirements vary based on proposal value, with specific requirements for bid bonds, payment bonds, and performance bonds for proposals valued at $35K and above, and $150K and above, respectively.