Painting and Flooring Bldgs S960, S962, 1069, etc.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the specifications and requirements for carpeting to be installed.

• Furnish first quality carpet and carpet cushion products.

• Ensure carpet materials and treatments are reasonably nonallergenic and free of health hazards.

• Provide static control construction for durability and performance.

• Adhere to specific requirements for modular tile carpet, including size, growth/shrink rate, backing materials, and attached cushion properties.

• Install carpet and cushion in accordance with manufacturer's instructions and relevant standards.

• Provide necessary adhesives and concrete primers.

• Ensure proper surface preparation, moisture and alkalinity testing, and subfloor preparation.

• Manage installation, cleaning, protection, and maintenance of the carpet.

• Texture Appearance Retention Rating (TARR) of greater than or equal to 3.0 (Heavy).

• Static control to regulate static buildup to less than 3.5 kV.

• Compliance with flammability standards (16 CFR 1630 or ASTM D2859) and critical radiant flux requirements (minimum 0.22 watts/sq cm).

• Tuft bind strength of minimum 8 pounds average force for modular carpet tile.

• Colorfastness to crocking (Class 4 minimum) and light (minimum 4 grey scale rating after 40 hours).

• Colorfastness to water (minimum 4.0 gray scale and 4.0 transfer scale rating).

• Delamination strength of minimum 2.5 lbs/inch for carpet with secondary backing.

• Antimicrobial treatment guaranteed for the life of the carpet.

• Carpet cushion critical radiant flux of minimum 0.22 watts/sq cm.

• Adhesives must have a flashpoint of minimum 140 degrees F.

• Products must meet indoor air quality requirements (CDPH SECTION 01350, UL 2818, SCS Global Services Indoor Advantage Gold, CRI GLP QM).

• Ambient conditions for installation: above 60°F and below 90°F for 2 days before, during, and 2 days after installation. Minimum temperature of 55°F thereafter for the duration of the contract.

• Installation areas are not explicitly defined but are implied to be within a building.

• All carpet and cushion products must be certified to meet indoor air quality requirements.

• Delivery materials must be in manufacturer's original wrappings, clearly labeled.

• Storage requires a clean, dry, well-ventilated area, protected from damage and moisture, at a temperature above 60°F for 2 days prior to installation.

• Installation must be performed by manufacturer's approved installers.

• Provide extra material (minimum 5%) from the same dye lot for future maintenance.

• Maintenance service must reclaim materials for recycling and/or reuse.

Solicitation / RFP / RFQ

This document is a solicitation for Painting and Flooring services at Buildings S960, S962, and 1069, located at MCB Camp Lejeune, North Carolina. The project number is 25-0405, and the solicitation number is N40085-26-R-9026.

• Painting and Flooring services for specified buildings.

• The facility/activity will remain in operation during the entire construction period, requiring minimal interference with normal operations.

• Contractor is responsible for moving furniture and other objects in the rooms.

• Specific roles (Superintendent, Quality Control Manager, Safety and Health Officer) can be filled by one qualified individual.

• Contract Completion Date: 240 days after award.

• Estimated Cost Range: Between $500,000 and $1,000,000.

• Liquidated Damages: $880 per Calendar Day.

• Basis for Award: Lowest Price.

• Proposal Acceptance Period: 60 days from receipt of offers.

• Proposal Due Date: April 24, 2026, 2:00 PM EST.

• E-Mail Address for Proposals: donna.l.mason31.civ@us.navy.mil and Regenia.d.guest.civ@us.navy.mil.

• Requests for Information (RFIs) cut off: April 10, 2026, 3:00 PM EST. RFIs to be submitted to donna.l.mason31.civ@us.navy.mil.

• Specifications and drawings are posted as attachments on https://sam.gov/.

• Offerors are advised that funding may not be available, and no award will be made if funds are not available. No costs will be reimbursed for effort or proposal costs.

• Only contractors on a specific list (N40085-25-D-2516, N40085-25-D-2517, N40085-25-D-2518, N40085-25-D-2519) may submit a proposal.

• Site Visit scheduled for March 27, 2026, at 0900. Meet at building S960.

• Bid bonds are required based on dollar values. 20% of proposal amount if required. No bonds required for proposals less than $35K.

• Proposals valued at $35K and greater require a payment bond.

• Proposals valued at $150K and greater require a bid bond, a payment bond, and a performance bond.

• Buy American Requirement-Construction Materials provision applies.

• Wage determination details are provided, including rates for various trades.

Form / Attachment / Pricing Sheet

This document is a Submittal Register, likely used to track and manage various submittals required from a contractor during a construction project. It serves as a checklist and tracking tool for both the contractor and the approving authority.

• Activity/Item Number: Unique identifier for each submittal.
• Description of Item Submitted: The specific document or item being submitted (e.g., Schedule of Prices, Accident Prevention Plan, Environmental Protection Plan).
• Contractor Information: Fields for contractor name, schedule dates, and action.
• Government Approval: Fields for the approving authority, dates for review and action, and remarks.
• Section References: Links submittals to specific sections of the contract or specifications (e.g., 1.3, 1.4.1, 1.9).

This register outlines the types of documents and plans that will be required from the contractor for preconstruction, closeout, and other project phases. Bidders should review this list to understand the scope of administrative and planning submittals necessary for contract execution and to ensure they can meet these requirements.

Form / Attachment / Pricing Sheet

This document, the "Marine Corps Base (MCB) Camp Lejeune Contractor Environmental Guide," Version Number 3, dated March 2016, serves as a comprehensive guide for contractors working on MCB Camp Lejeune and MCAS New River. It outlines environmental policies, regulations, and procedures to ensure compliance with Federal, State, and USMC environmental laws.

• Environmental Management System (EMS): Details the principles and responsibilities for integrating environmental considerations into daily operations.
• Specific Environmental Areas: Covers requirements for Air Quality, Environmental Emergency Planning and Response, Cultural Resources, Hazardous Materials/Waste Management, Asbestos, Lead-Based Paint, Natural Resources, Wetlands, Stormwater, Solid Waste/Recycling/Pollution Prevention, and Permitting.
• Training Requirements: Outlines mandatory EMS and General Environmental Awareness training for all personnel.
• Points of Contact: Provides a directory of relevant personnel and departments for environmental inquiries and emergencies.
• Appendices and Attachments: Includes forms such as the "Spill Reporting Form" and "Weekly Hazardous Waste (HW) Site Inspection Form," as well as the "Commanding General's Environmental Policy Statement."

This guide is crucial for any contractor performing work on MCB Camp Lejeune or MCAS New River. It details the environmental regulations, compliance requirements, and procedures that must be followed to avoid penalties and ensure successful project execution. Bidders should familiarize themselves with the relevant sections pertaining to their specific scope of work to understand their environmental obligations and responsibilities.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the "Summary of Work" for a project located at Marine Corps Base Camp Lejeune, North Carolina. The primary objective is to procure all items of work as described in the attached project description.

• The work encompasses all items detailed in the attached project description.

• The location of the work will be at the Marine Corps Base Camp Lejeune, North Carolina, within a specified building and/or area.

• Construction will commence and be completed in phases as described in the attached project description.

• The contractor is responsible for managing existing work, including protection of vegetation, structures, equipment, and utilities, and ensuring that any existing work removed or altered is repaired or replaced to match existing conditions or better.

• The contractor must identify and verify the location of all underground facilities prior to excavation, using professional utility locators and electromagnetic or sonic equipment. Elevations of existing piping, utilities, and obstructions must be verified before installing new work.

• Notification to the Contracting Officer's Representative (COR) is required 48 hours prior to starting excavation work.

• Government-furnished material and equipment will be indicated on drawings and in the scope of work, if applicable.

• Location: Marine Corps Base Camp Lejeune, North Carolina.

• Compliance with "FAR 52.236-9, Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements."

• Responsibility for locating and verifying underground facilities.

• Notification to COR prior to excavation.

• Adherence to phased construction schedule as described in the project description.

Form / Attachment / Pricing Sheet

This document is an Asbestos Inspection Report for Building # 111 at MCB Camp Lejeune. It details the findings of an inspection to identify asbestos-containing materials (ACM) within the building.

• Inspection Summary: Provides an overview of the building's condition, occupant, year built, and asbestos manager. It lists comments on identified ACM, including friable and non-friable types, their locations, and dates of identification.
• Friable ACM(s) identified: Lists specific materials like fibrous debris in overhead mesh, with their locations and quantities.
• Non-friable ACM(s) identified: Details materials such as transite panel material and exterior caulking, along with their locations and quantities.
• Tested Non ACM or REMOVED Materials: Lists materials that were tested and found not to contain asbestos, or have been removed.
• Samples Collected: A detailed log of collected samples, including description, sample date, location, and laboratory analysis results (percentage of Chrysotile, Amosite, and Other asbestos).
• Health Aspects & Conditions to Avoid: Provides information on the health hazards associated with ACM and guidelines for avoiding disturbance.
• Response Action & Recordkeeping: Outlines corrective actions, inspection schedules, and recordkeeping responsibilities.

This report is crucial for any bidder involved in renovation, demolition, or maintenance activities within Building # 111. It identifies the presence, type, and location of asbestos-containing materials, which will dictate specific handling, abatement, or containment procedures required by regulations. Understanding the scope and location of ACM is essential for accurate bidding, project planning, and ensuring compliance with safety and environmental standards.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for a general building painting and flooring project, including material, labor, equipment, and supervision.

• General Painting: Repair cracks, holes, and damaged surfaces; clean mold/mildew; apply interior/exterior finish compound; match existing colors; replace damaged trim, siding, and moldings; secure loose trim; prime surfaces with latex KILZ 2 or equivalent; apply specified coats of latex paint (semi-gloss, eggshell/satin, high gloss) to various surfaces including metal, interior walls, wood trim, masonry, EFIS, and high bay areas. Special attention is given to bathroom areas requiring mildew-resistant paint. Preparation includes scraping and adhesion enhancement for wood, masonry, and metal surfaces. No roof surfaces are to be painted unless specified.
• Flooring: Install non-skid epoxy flooring in engine dyno bays (Building FC280). Remove existing carpet and vinyl cove base in specific rooms of Building 1039 and replace with Tarkett Crafted Plank Provence and new vinyl cove base. Remove existing carpet and VCT in specific rooms of Building A71 and Building 111, seal floors, and install Tarkett Winter Gray carpet tiles with new vinyl cove base.
• Surface Preparation: Cover and protect furniture and building components; remove and reset furniture; remove and reinstall electrical/data switch and receptacle covers; paint over and replace stenciled signage; clean over-spray, drips, and spills. Previously painted concrete floors require cleaning, sealing, and application of Sherwin Williams Rexthane I Floor paint or equivalent.
• Lead Paint: For areas testing positive or negative for lead paint, the intent is to scrape and encapsulate lead paint, not abate it. A hazardous materials plan is required for lead work.

Work is to be performed at various buildings including S960, S962, 1069, FC280, 1039, FC375, 60, FC330, TT19, HP5, A71, and 111, located at specified addresses.

• Submittals: Contractor must submit manufacturer's product specifications and technical data, with approved submittal sheets and electronic copies on CD's/DVD's.
• Scheduling & Access: Coordination with points of contact for each building is required for access and scheduling.
• Hazardous Materials: A hazardous materials plan is required for lead work.
• Environmental: As identified.

Form / Attachment / Pricing Sheet

This document provides a detailed list of quantities for painting and flooring projects across multiple buildings. It serves as a reference for potential bidders to understand the scope of work required for each task.

• Project Title: Multiple Building Painting and Flooring Project
• Project Number: 25M016CN
• MACC: 25-0405
• Maximo Number: 5422382
• Quantities Table: Lists specific buildings, the type of work (Paint, Flooring Epoxy, Paint/Drywall, Carpet, Metal Doors), the quantity required, and the unit of measure (SF for Square Feet, EA for Each).

This document is crucial for bidders to estimate material, labor, and overall costs accurately. It details the specific amounts of paint, flooring, and other materials needed for each building, directly impacting proposal development and pricing strategies.

Other / Unclassified

This document is a specification for "Paints and Coatings" (Section 09 90 00), dated 02/21. It details general requirements, references, definitions, submittals, quality assurance, packaging, labeling, storage, safety, environmental requirements, and execution procedures for painting and coating applications. It extensively lists and references various standards and product specifications from organizations such as ACGIH, ASME, ASTM, CDC, MPI, SSPC, NACE, SAE, USACE, DOD, EPA, FAA, GSA, and NARA.

This document is highly relevant to bidders as it outlines the specific technical requirements, materials, application methods, and quality standards for any painting or coating work associated with the opportunity. Bidders must understand and comply with these specifications to ensure their proposals are compliant and their execution of work meets the government's standards. Key areas include:

• Materials: Detailed lists of approved paints, primers, and coatings (MPI system numbers) for various substrates (concrete, masonry, metal, wood, etc.) and applications (interior, exterior, high-temperature, etc.).
• Surface Preparation: Specific instructions for preparing different surfaces before coating, including cleaning, rust removal, and repair.
• Application Procedures: Requirements for applying coatings, including environmental conditions, mixing, thinning, number of coats, and dry film thickness (DFT).
• Quality Assurance: Standards for testing, inspection, and acceptance, including lead and asbestos content restrictions.
• Safety and Environmental: Compliance with safety regulations and environmental protection measures.

Bidders should carefully review the relevant sections of this specification to accurately estimate costs, labor, and material requirements, and to ensure their proposed approach meets all technical and performance criteria.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the specifications and requirements for the installation of resilient flooring, including luxury vinyl tile, wall base, adhesives, and related accessories.

• Installation of luxury vinyl tile (LVT) conforming to ASTM F1700 Class III, with specific requirements for wear layer thickness, overall thickness, and surface treatment.

• Installation of resilient wall base.

• Provision and installation of adhesives, caulking, and sealants that meet indoor air quality requirements.

• Surface preparation of subfloors, including ensuring a smooth, true, and level plane, and conducting moisture, alkalinity, and bond tests.

• Installation of moulding for flooring terminations and transitions.

• Cleaning and protection of installed flooring.

• Adherence to specified ASTM standards for materials (e.g., ASTM F1700, ASTM F925, ASTM F970, ASTM D2047, ASTM E648, ASTM E662, ASTM F1914).

• Compliance with indoor air quality requirements (e.g., FLOORSCORE, UL 2818 Gold, SCS Global Services Indoor Advantage Gold).

• Specific requirements for surface flatness (3/16 inch in 10 feet).

• Critical radiant flux of 0.45 watts per square centimeter for corridors and exits.

• Smoke density below 450.

• Not explicitly stated in this document, but implies installation within a building structure.

• Materials must be certified to meet indoor air quality requirements.

• Adhesives must be non-aerosol for interior use and meet specific emissions or VOC content requirements.

• Environmental requirements include maintaining specific temperature ranges (above 68°F and below 85°F) before, during, and after application, and providing adequate ventilation.

• Extra flooring material and wall base material must be provided at specified rates.

• Manufacturer's installation instructions must be followed.

• Site conditions must be examined and verified before installation.