T-158LL Track Shoe and Pin Assembly Press

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items to procure one (1) T-158LL Track Shoe and Pin Assembly Press. The press is intended for use in the Rubber Products Branch of Red River Army Depot (RRAD) to insert rubberized pin bushings into track shoe assemblies for tracked military vehicles. This announcement serves as the sole solicitation; no separate solicitation document will be issued.

• Manufacture and supply one (1) T-158LL Track Shoe and Pin Assembly Press.

• Fabrication and assembly must be in accordance with RRAD drawings 12387879 Revision A, 2033577, and 2033591.

• The press must be fully functional and demonstrate successful performance in inserting rubberized track pins.

• Contractor shall identify and supply a suitable hydraulic power unit with air cooling.

• Compliance with various federal, state, and local environmental, safety, and security regulations is required.

• Equipment must be designed for maintainability and interchangeability of parts.

• Contract Type: Firm Fixed Price, requirements type.

• Period of Performance: Delivery is required no later than ten (10) months after contract award.

• Place of Performance: Red River Army Depot, Building 493, Texarkana, TX.

• Offers must be submitted in two parts: Part I – Price, and Part II - Technical.

• Pricing information is to be entered in Table I. Required Supplies.

• Technical capability and past performance will be evaluated based on Table II. Go/No-Go Criterion.

• Evaluation Criteria: Best value to the government, considering technical capability, past performance, and price.

• Offerors must provide supporting documentation for "YES" responses in Table II.

• Key Deadline: Response due by 30 APR 2026 @ 3:00 pm CST.

• Set Aside: None; Full and Open Competition.

• NAICS Code: 333517.

• Offerors must acknowledge all terms and conditions or list exceptions with rationale.

• Access to the Technical Data Package (TDP) requires a current SAM.gov registration and DD 2345 certification.

• The Government may conduct interchanges with offerors at its discretion.

• Offerors are responsible for verifying their calculations.

Combined Synopsis/Solicitation

This document serves as a combined synopsis and solicitation for commercial items, seeking offers for the fabrication and supply of one (1) T-158LL Track Shoe and Pin Assembly Press. This is the only solicitation; no separate solicitation document will be issued. The procurement is a 100% Total Small Business Set-Aside.

• Manufacture and supply one (1) T-158LL Track Shoe and Pin Assembly Press.

• The press must be manufactured in accordance with RRAD drawings 12387879 Revision A, 2033577, and 2033591.

• The press is used to insert rubberized pin bushings into track shoe assemblies for tracked military vehicles.

• The contractor shall identify and supply a suitable hydraulic power unit for the press.

• The press must demonstrate successful performance in accordance with the provided track assembly specification.

• The Government will provide track parts for testing and development.

• Contract Type: Firm Fixed Price - Requirements.

• Delivery: FOB destination, no later than ten (10) months after contract award.

• Warranty: One (1) year against defective materials, design, and workmanship.

• Offers must be submitted electronically by the due date.

• Offers consist of two parts: Part I – Price, and Part II - Technical.

• Evaluation Criteria: Best value to the government, considering technical capability, past performance (Go/No-Go Criterion), and price.

• Technical evaluation will be a "go/no-go" or pass/fail basis, requiring an "Acceptable" rating for award.

• Price evaluation will rank offers from lowest to highest Total Evaluated Price (TEP).

• Period for Acceptance of Offers: 90 calendar days from the date specified for receipt of offers.

• 100% Total Small Business Set-Aside.

• NAICS Code: 333517, with a small business size standard of 500.

• Access to the Technical Data Package (TDP) requires a current SAM.gov registration and an approved DD 2345, "Military Critical Technical Data Agreement" certification.

• Posted Date: 25 February 2026

• Original Response Date: 15 APR 2026 @ 3:00 pm CST

• Current Response Date: 21 APR 2026 @ 3:00 pm CST

• Offerors must include a statement regarding acceptance of terms and conditions or list any exceptions.

• Any questions or concerns should be forwarded in writing via e-mail to the Points of Contact.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items to procure one (1) T-158LL Track Shoe and Pin Assembly Press for the Red River Army Depot (RRAD), Rubber Products Branch. The press is used to insert rubberized pin bushings into track shoe assemblies for tracked military vehicles. This announcement is the only solicitation; no separate solicitation document will be issued.

• Manufacture and supply one (1) T-158LL Track Shoe and Pin Assembly Press.

• Fabrication, testing, and delivery of the press.

• The press must be manufactured in accordance with RRAD drawings 12387879 Revision A, 2033577, and 2033591.

• Contractor may deviate from drawings with prior Government approval if necessary for successful operation.

• Contractor shall identify and supply a suitable hydraulic power unit.

• The press must demonstrate successful performance in accordance with the provided track assembly specification.

• Government will provide track parts for testing and development.

• Contract Type: Firm Fixed Price - requirements type.

• Period of Performance: Delivery is required no later than ten (10) months after contract award.

• Place of Performance: Red River Army Depot, Building 493, Texarkana, TX.

• Submission Deadline: 15 APR 2026 @ 3:00 pm CST.

• Offers must be complete, self-sufficient, and respond directly to the requirements.

• Offers consist of two parts: Part I - Price, and Part II - Technical.

• Evaluation Criteria: Award will be made to the responsible offeror whose offer represents the Best and Lowest Responsive Offer based on price, technical capability, past performance, and delivery time frame.

• Technical Evaluation: Will be a go/no-go or pass/fail basis, requiring a "GO" in all lines of Table II. Go/No-Go Criterion.

• Price Evaluation: Offers will be ranked from lowest to highest Total Evaluated Price (TEP).

• This procurement is a 100% Total Small Business set aside.

• NAICS Code: 333517, with a small business size standard of 500.

• Offerors must complete annual representations and certifications electronically in the System for Award Management (SAM).

• Access to the Technical Data Package (TDP) requires a current sam.gov registration and an approved DD 2345, "Military Critical Technical Data Agreement" certification.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, specifically for the fabrication, testing, and delivery of one (1) T-158LL Track Shoe and Pin Assembly Press. The press is intended for use in the Rubber Products Branch of the Red River Army Depot (RRAD) to insert rubberized pin bushings into track shoe assemblies for tracked military vehicles. This announcement serves as the sole solicitation; no separate solicitation document will be issued. Offers are being requested.

• Manufacture and supply one (1) T-158LL Track Shoe and Pin Assembly Press.

• The press must be manufactured in accordance with RRAD drawings: 12387879 Revision A, 2033577, and 2033591.

• The contractor shall identify and supply a suitable hydraulic power unit for the press.

• The press must demonstrate successful performance in accordance with the provided track assembly specification.

• The contractor shall provide an electronic copy of the factory documentation for the hydraulic power unit.

• The equipment shall be designed and constructed to meet various general requirements including compliance with environmental laws, OSHA, NFPA, and local safety regulations.

• All parts must be new, without defects, and free of repairs.

• The equipment shall be designed for maintainability with accessible parts for service.

• The press must be delivered and made fully operational at Red River Army Depot, building 493, Texarkana, TX, no later than ten (10) months after contract award.

• A one (1) year warranty against defective materials, design, and workmanship is required.

• Contract Type: Firm Fixed Price - requirements type contract.

• Period of Performance: Delivery is FOB destination no later than ten (10) months after contract award.

• Estimated Value: Not specified.

• Offers must be complete, self-sufficient, and respond directly to the requirements.

• Offers consist of two parts: Part I – Price, and Part II - Technical.

• Pricing information is to be entered in Table I. Required Supplies.

• Technical capability and past performance are to be addressed in Table II. Go/No-Go Criterion.

• Supporting documentation (brochures, letters, redacted invoices) is required for 'YES' responses in Table II.

• Evaluation Criteria: Award will be made to the responsible offeror whose offer represents the Best and Lowest Responsive Offer, considering technical capability, past performance, and price.

• Technical evaluation will be a go/no-go or pass/fail basis, requiring an 'Acceptable' rating for award.

• Offerors must include a statement regarding acceptance of terms and conditions or list exceptions.

• Submission Deadline: 1 APR 2026 @ 3:00 pm CST.

• This is a 100% Total Small Business set-aside.

• NAICS Code: 333517, with a small business size standard of 500.

• Access to the Technical Data Package (TDP) requires a current SAM.gov registration and a DD 2345 certification.

• Offerors are encouraged to input their best and final commercial price.

• Questions should be submitted in writing via email to the Points of Contact.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items to procure one (1) T-158LL Track Shoe and Pin Assembly Press for the Red River Army Depot (RRAD), Rubber Products Branch. The press is used to insert rubberized pin bushings into track shoe assemblies for tracked military vehicles. This announcement constitutes the only solicitation; no separate solicitation document will be issued.

• Manufacture and supply one (1) T-158LL Track Shoe and Pin Assembly Press.

• Fabrication and assembly must be in accordance with RRAD drawings: 12387879 Revision A, 2033577, and 2033591.

• The contractor shall identify and supply a suitable hydraulic power unit.

• The press must demonstrate successful performance in accordance with the provided track assembly specification.

• The contractor shall comply with all applicable federal, state, and local environmental laws, statutes, regulations, and safety standards (including OSHA and NFPA).

• Equipment must be constructed of new, defect-free parts and be interchangeable.

• All surfaces must be clean and free of harmful or extraneous materials.

• Measuring and indicating devices must be graduated in U.S. Customary Units.

• The equipment shall be designed for maintainability.

• A one (1) year warranty against defective materials, design, and workmanship is required.

• Contract Type: Firm Fixed Price - requirements type.

• Period of Performance: Delivery is required no later than ten (10) months after contract award.

• Estimated Value: Not specified.

• Offers must be submitted electronically by 18 MAR 2026 @ 3:00 pm CST.

• Offers must be complete, self-sufficient, and respond directly to the requirements.

• Offers consist of two parts: Part I - Price, and Part II - Technical Data Package (TDP).

• Evaluation will be based on the lowest responsive offer considering technical capability, past performance, and price.

• Technical evaluation will be a go/no-go or pass/fail basis.

• Price evaluation will rank offers from lowest to highest Total Evaluated Price (TEP).

• Offerors must complete Table I (Required Supplies) and Table II (Go/No-Go Criterion).

• Supporting documentation (brochures, letters, invoices) is required for "YES" responses in Table II.

• Offerors must state whether the terms and conditions are acceptable without modification or list exceptions.

• 100% Total Small Business Set-Aside.

• NAICS Code: 333517, with a small business size standard of 500.

• Access to the Technical Data Package (TDP) requires a current SAM.gov registration and an approved DD Form 2345, “Military Critical Technical Data Agreement.”

• The Government may conduct interchanges with offerors at its discretion.

• The Government reserves the right to award without discussion or to cancel the solicitation.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items to procure one (1) T-158LL Track Shoe and Pin Assembly Press for the Red River Army Depot (RRAD), Rubber Products Branch. The press is used to insert rubberized pin bushings into track shoe assemblies for tracked military vehicles. This announcement is the only solicitation; offers are being requested, and a written solicitation document will not be issued.

• Manufacture and supply one (1) T-158LL Track Shoe and Pin Assembly Press.

• Fabrication and assembly must be in accordance with RRAD drawings 12387879 Revision A, 2033577, and 2033591.

• The contractor shall identify and supply a suitable hydraulic power unit.

• The press must demonstrate successful performance in fabricating and assembling track shoes.

• The Government will provide engineering drawings, track parts for testing, and guidance on typical operation.

• Contractor may deviate from drawings with prior Government approval.

• The equipment must comply with various standards including OSHA, NEC, and all applicable federal, state, and local environmental laws.

• All parts must be interchangeable and available commercially within the continental United States.

• Controls must be conveniently located for the operator.

• The equipment must be constructed of new, defect-free parts.

• Surfaces must be clean and free of harmful materials; edges should be rounded unless sharpness is required.

• Measuring and indicating devices must be graduated in U.S. Customary Units and legibly engraved.

• The equipment must be designed for maintainability with minimal tools.

• A one (1) year warranty against defective materials, design, and workmanship is required.

• Contract Type: Firm Fixed Price - requirements type.

• Period of Performance: Delivery is FOB destination no later than ten (10) months after contract award.

• Estimated Value: Not specified.

• Offers must be complete, self-sufficient, and respond directly to the requirements.

• Offers consist of two parts: Part I - Price, and Part II - Technical.

• Pricing information is to be entered in Table I. Required Supplies.

• Technical capability/past performance is to be addressed in Table II. Go/No-Go Criterion.

• Supporting documentation for "YES" responses in Table II is required.

• Evaluation will be based on the lowest responsive offer considering technical capability, past performance, and price.

• Technical evaluation is a go/no-go or pass/fail basis.

• Offers must be submitted electronically by the due date.

• Key Deadlines: Response Date is 18 MAR 2026 @ 3:00 pm CST.

• 100% Total Small Business Set-Aside.

• NAICS Code: 333517, with a small business size standard of 500.

• Access to the Technical Data Package (TDP) requires a current SAM.gov registration and an approved DD 2345, "Military Critical Technical Data Agreement" certification.

• Offerors must include a statement regarding acceptance of terms and conditions or list exceptions.

• Late submissions will be treated in accordance with FAR 52.212-1(f).

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items to procure one (1) T-158LL Track Shoe and Pin Assembly Press for the Red River Army Depot (RRAD), Rubber Products Branch. This announcement serves as the only solicitation, and offers are being requested.

• Manufacture and supply one (1) T-158LL Track Shoe and Pin Assembly Press.

• Fabrication and assembly must adhere to RRAD drawings 12387879 Revision A, 2033577, and 2033591.

• The press is used to insert rubberized pin bushings into track shoe assemblies for tracked military vehicles.

• The contractor shall identify and supply a suitable hydraulic power unit.

• The press must demonstrate successful performance in accordance with the provided track assembly specification.

• The government will provide track parts for testing and development.

• Contract Type: Firm Fixed Price - requirements type contract.

• Delivery: FOB destination, no later than ten (10) months after contract award.

• Place of Performance: Red River Army Depot, Building 493, Texarkana, TX.

• Warranty: One (1) year against defective materials, design, and workmanship.

• Submission Deadline: 18 MAR 2026 @ 3:00 pm CST.

• Offers must be submitted electronically.

• Evaluation Criteria: Award will be made to the responsible offeror whose offer provides the best value to the government, considering technical capability, past performance, and price.

• Technical Evaluation: Will be a go/no-go or pass/fail basis, rated Acceptable or Unacceptable.

• Price Evaluation: Offers will be ranked from lowest to highest Total Evaluated Price (TEP).

• Offer Acceptance Period: 90 calendar days from the date specified for receipt of offers.

• 100% Total Small Business Set Aside.

• NAICS Code: 333517, with a small business size standard of 500.

• The Technical Data Package (TDP) is restricted and requires a current SAM.gov registration and an approved DD 2345, “Military Critical Technical Data Agreement” certification for access.

• Offers must include a statement regarding acceptance of contract terms and conditions.

• Points of Contact for questions are provided via email.