USS MIGUEL KEITH (ESB-5) MSC CIVMAR VRA KR

Form / Attachment / Pricing Sheet

This document is an Engineering Report detailing the Work Item Index for MSC Corrective Maintenance on the USS Miguel Keith (ESB 5). It serves as a reference for various maintenance tasks scheduled for March 2026.

The report is organized into sections covering different systems:

• SECTION 0000: GENERAL SERVICES AND REQUIREMENTS
  • Includes items like General Requirements, Technical and Manufacturers specifications, Testing and Quality Assurance, High Voltage Electrical Safety, Project Management, Shipboard Access and Security, and Gas Free Certificates.
• SECTION 0100: HULL AND STRUCTURAL
  • Covers RAS Station Preservation, inspection and cleaning of service trunk bilges, and cable penetration inspection.
• SECTION 0300: ELECTRICAL
  • Details the replacement of a bridge clock.
• SECTION 0400: COMMUNICATION AND NAVIGATION
  • Includes X-Band Sperry Tech Support and Harris Radio Signal Expansion.
• SECTION 0500: AUXILIARY MACHINERY
  • Encompasses tasks such as Ballast System Piping Gauging and Repairs, Oil Content Meter Calibration, General Service Air Compressor Service, and Reverse Osmosis Unit Service and Repair.
• SECTION 0600: HABITABILITY OUTFITTING AND FURNISHINGS
  • Mentions the installation of a forward decontamination unit.

This document outlines specific maintenance tasks and areas of work related to the USS Miguel Keith. Bidders interested in opportunities involving ship maintenance, repair, and system servicing, particularly within the categories listed, should review this index to understand the scope and nature of potential work. It provides a detailed breakdown of required services across various ship systems.

Form / Attachment / Pricing Sheet

This document is a contractor price breakdown spreadsheet for services related to the USS MIGUEL KEITH (MSC) VRA KR, scheduled from March 23 to April 5, 2026. It is intended for bidders to detail their proposed costs for various work items.

• The spreadsheet lists specific work items with titles such as 'ESB-SWI-Scope General Requirements and Definitions', 'Project Management', 'Inspect and Clean Service Trunk Bilges', and 'Replace Bridge Clock VR 24-0055'.
• Columns are provided for Prime Contractor and Subcontractor labor hours, labor prices, material prices, and other specified costs.
• A 'Total Price' column aggregates costs per work item, categorized by 'CAT A'.
• All listed work items currently show 'NSP' (Not Specified or Not Applicable) or '0' for labor hours, labor price, and material price for both prime and subcontractors, indicating no costs are currently detailed for these items.
• A 'Remarks' section is available for additional details.

Bidders must use this template to provide a detailed cost proposal for the services required. The current lack of pricing information suggests that bidders need to populate this sheet with their proposed costs for each line item to be considered for the opportunity.

Amendment / Modification

• This amendment incorporates an additional requirement for "WI 0401_A_X-Band Sperry Tech Support" into the work package and solicitation.

• Solicitation Attachments J-1 and J-2 have been revised to reflect this change.

• Solicitation Attachments J-1 and J-2.

• The proposal due date remains unchanged: 12 Mar 2026 at 10 AM.

Statement of Work (SOW) / Performance Work Statement (PWS)

To perform a system groom for the OWS (Oily Water Separator) from the OEM (Original Equipment Manufacturer).

• Provide services of an OEM field services technical representative to inspect and test the oily water separators and associated oil content monitors.

• Inspect and clean oily water inlet/outlet and clean water inlet/outlet valves, replacing as required.

• Test system relief valves and check pressure gauges for proper operation and calibration.

• Clean the separator using specified flushing guidelines and ensure removal of accumulated solids and sludge.

• Clean the oil sensing probe.

• Verify proper operation of the Oily Content Detector (OCD) and provide a current verification certificate (if internet is available, otherwise within five days post-service).

• Conduct Ultra-Sep clean using specified guidance.

• Operate Ultra-Sep (OWS) and record readings on the Service Report.

• Coordinate with ship's force for equipment lock-out/tag-out procedures.

• Drain and dispose of any liquid in accordance with all applicable laws.

• Prepare, prime, paint, and restore all disturbed surfaces to match surrounding areas.

• Renew lagging where damaged or disturbed.

• All work must be completed to the satisfaction of the OMT REP and Chief Engineer.

• Prove proper operation of the oily water separators to OMT REP, ensuring oil content in product water is less than 15 ppm.

• Submit condition reports detailing deficiencies, recommended repairs, and parts required.

• Submit a report detailing the "as released" condition of the Oil Content Monitor.

• Provide a final detailed condition report of conditions found, work accomplished, and new recommendations.

• Work to be performed on a ship located at Auxiliary Machinery Room (6-108-0).

• The estimate includes testing the oil content monitor while the ship is underway, as most ports do not allow pier-side operation.

• Contractor and subcontractors must consult the General Technical Requirements (GTRs) 1-7, 22, 23, 24, 28, and 29.

• Contractors must be OEM authorized or MSC qualified non-OEM technical field service providers.

• Only OEM authorized or MSC qualified non-OEM parts shall be used.

• Provide a signed letter of qualification from the OEM and certificate of training for the field service representative prior to starting work.

• High Voltage (HV) electrical systems are present; strict adherence to safety instructions is required. Assume all electrical cables are energized until tested otherwise.

• If required parts are not available from ship spares, a condition report must be submitted, and a contract modification will be requested.

Form / Attachment / Pricing Sheet

This document is a contractor price breakdown spreadsheet for the USS MIGUEL KEITH (MSC) VRA KR opportunity, covering the period of March 23 to April 5, 2026. It is intended for bidders to detail their proposed costs.

• The spreadsheet outlines various work items, categorized by Work Item No. and Title.
• Columns are provided for both Prime Contractor and Subcontractor labor hours, labor prices, and material prices.
• It also includes fields for 'Other (specify in Remarks)' costs and a 'Total Price' for each work item.
• A 'CAT' column indicates the category for each work item.
• Notably, many work items are marked as 'NSP' (Not Specified or Not Applicable) for labor and material costs, and several have 0 labor hours and 0 cost.
• The total for 'CAT A' items is listed as $0.0.

Bidders should use this template to provide a detailed breakdown of their proposed pricing for the services required. The structure allows for the allocation of costs between prime and subcontractor efforts, as well as material and labor components. Bidders must fill in the relevant cost information for each applicable work item and ensure the total price accurately reflects their bid. The 'Remarks' section can be used for additional cost justifications.

Amendment / Modification

• This amendment (0002) to Solicitation N6264926RK006, originally dated 10 Feb 2026, provides a revised Work Instruction (WI) 0510_OWS SYSTEM GROOM.

• This revised WI replaces the current WI 0510_ESB_CSI_OIL CONTENT METER CALIBRATION (5YR)(SCSI).

• Solicitation Attachments J-1 and J-2 have been revised to reflect this change.

• Work Instruction WI 0510_OWS SYSTEM GROOM (revised)

• Work Instruction WI 0510_ESB_CSI_OIL CONTENT METER CALIBRATION (5YR)(SCSI) (superseded)

• Solicitation Attachments J-1 and J-2 (revised)

• The proposal due date remains unchanged: 12 Mar 2026 at 10 AM.

• All other terms, conditions, and requirements remain unchanged.

Form / Attachment / Pricing Sheet

This document is an index report for "MSC Corrective Maintenance Engineering Report" for the USS MIGUEL KEITH (ESB 5), specifically for the MSC March VRA CY 2026 period. It lists various work items categorized by sections.

• Section 0000: General Services and Requirements: Includes items like Scope General Requirements, Technical and Manufacturers, Testing and Quality Assurance, High Voltage Electrical Safety, Project Management, Shipboard Access and Security, and Gas Free Certificates.
• Section 0100: Hull and Structural: Covers RAS Station Preservation, Inspection and Cleaning of Service Trunks, and Cable Penetration Inspection.
• Section 0300: Electrical: Details the replacement of a Bridge Clock.
• Section 0400: Communication and Navigation: Includes work on Harris Radio Signal Expansion.
• Section 0500: Auxiliary Machinery: Lists tasks for Ballast System Piping Gauging and Repairs, OWS System Groom, General Service Air Compressor Service, and Reverse Osmosis Unit Service and Repair.
• Section 0600: Habitability Outfitting and Furnishings: Mentions the installation of a Forward Decontamination unit.

This index provides a detailed breakdown of specific maintenance and repair tasks required for the USS MIGUEL KEITH. Bidders can use this to understand the scope of work, identify areas of expertise needed, and potentially estimate the effort involved in fulfilling these requirements as part of a larger opportunity.

Form / Attachment / Pricing Sheet

This document is an index report for work items related to the MSC Corrective Maintenance for the USS MIGUEL KEITH (ESB 5) for March VRA CY 2026. It lists various maintenance tasks categorized by section.

• General Services and Requirements: Includes scope, technical requirements, testing, quality assurance, high voltage safety, project management, shipboard access, and gas-free certificates.
• Hull and Structural: Covers RAS station preservation, service trunk bilge cleaning, and cable penetration inspection.
• Electrical: Details the replacement of a bridge clock.
• Communication and Navigation: Includes finishing a Harris radio signal expansion.
• Auxiliary Machinery: Encompasses ballast system piping gauging and repairs, oil content meter calibration, general service air compressor service, and reverse osmosis unit service and repair.
• Habitability Outfitting and Furnishings: Covers the installation of a forward decontamination area.

This index provides a detailed breakdown of specific maintenance and repair tasks required for the USS MIGUEL KEITH. Bidders can use this to understand the scope of work, identify areas of expertise needed, and assess their capability to perform these tasks as part of the overall opportunity.

Amendment / Modification

This amendment (0001) to Solicitation N6264926RK006 incorporates an additional requirement for the USS MIGUEL KEITH (ESB-5) MSC CIVMAR, specifically for Work Item 0598: Reverse Osmosis Unit Service and Repair.

• Solicitation Attachments J-1 and J-2 have been revised to reflect this new requirement.

• All other terms, conditions, and the proposal due date of 12 March 2026 at 10 AM remain unchanged.

Statement of Work (SOW) / Performance Work Statement (PWS)

To perform maintenance and training on a reverse osmosis (RO) unit.

• Perform maintenance on one Aqua-Chem, Inc. Model MLP 25,000 USGPD reverse osmosis unit located in the Auxiliary Machinery Room (3-97-0).

• Provide and install a pre-programmed PLC memory module.

• Provide and install a replacement PI-109 pressure transducer.

• Update programming using the ship's onboard spare PLC to match the provided module, then restore the system as required.

• Provide hands-on training to crew members on programming, software updates, and PLC installation.

• Drain and dispose of any liquid in accordance with all applicable laws.

• Prepare, prime, paint, and restore all disturbed surfaces, and renew lagging where damaged.

• Provide an "as found" condition report and an "as released" condition report.

• All work must be performed by an OEM authorized field service representative.

• Compliance with manufacturer's standards and performance specifications is required.

• Operational testing must be performed in the presence of the ship's engineer.

• Reports must be submitted electronically in PDF format.

• Location: Auxiliary Machinery Room (3-97-0).

• The document does not specify the period of performance.

• Contractor and subcontractors must consult and comply with applicable General Technical Requirements (GTRs), including GTRs 1-7, 22, 23, 24, 28, and 29.

• Contractor must coordinate with ship's force for lockout/tag-out procedures.

• Extreme caution is required due to high voltage electrical systems; assume all electrical cables are energized until tested.

• Refer to Work Item 001 for definitions related to this work item.

Form / Attachment / Pricing Sheet

This document is a contractor price breakdown spreadsheet for services related to the USS MIGUEL KEITH (MSC) VRA KR, scheduled from March 23 to April 5, 2026. It details the expected labor hours and pricing for various work items, distinguishing between prime contractor and subcontractor costs.

• Work Items: Lists specific tasks such as "ESB-SWI-Scope General Requirements and Definitions," "Project Management," "RAS Station Preservation," "Replace Bridge Clock VR 24-0055," and various inspection and repair services.
• Pricing Structure: Includes columns for Labor Hours, Labor Price (US$), Material Price (CFM) (US$), and Other (specify in Remarks) (US$) for both prime and subcontractors.
• Total Price: A column for the Total Price (US$) for each work item and a summary total for "CAT A" items.
• NSP Entries: Many work items are marked as "NSP" (Not Specified or Not Applicable) for labor hours and prices, indicating no cost or effort is allocated for these specific tasks in this breakdown.
• Remarks: A section for additional details or specifications.

This spreadsheet is crucial for potential bidders to understand the cost structure and expected pricing for the services required. It outlines the specific work items that will be performed and provides a template for how costs should be broken down. Bidders should use this document to formulate their pricing proposals, ensuring they align with the government's expectations for labor, materials, and other associated costs for the specified period and vessel.

Form / Attachment / Pricing Sheet

This document is a Work Item Index Report for the MSC Corrective Maintenance Engineering Report for the USS MIGUEL KEITH (ESB 5). It outlines the specific work items associated with the MSC March VRA CY 2026-03-23 - VRA.

The report is organized into sections by major work categories:

• General Services and Requirements: Includes scope, technical requirements, testing, safety, project management, access, and gas-free certificates.
• Hull and Structural: Covers RAS station preservation, bilge cleaning, and cable penetration inspection.
• Electrical: Details the replacement of a bridge clock.
• Communication and Navigation: Includes work on a Harris radio signal expansion.
• Auxiliary Machinery: Encompasses ballast system gauging and repairs, and general service air compressor service.
• Habitability Outfitting and Furnishings: Mentions the installation of a forward decontamination unit.

This index provides a detailed breakdown of the specific tasks and systems that require maintenance or repair. Bidders can use this list to understand the scope of work, identify areas of expertise required, and estimate the effort involved in fulfilling the requirements of the opportunity.

Form / Attachment / Pricing Sheet

This document is a contractor price breakdown spreadsheet for the USS MIGUEL KEITH (MSC) VRA KR opportunity, covering the period of March 23 - April 5, 2026. It is intended for bidders to detail their proposed pricing for various work items.

• Work Items: Lists specific tasks and services required, categorized by number and title (e.g., 'ESB-SWI-Scope General Requirements and Definitions', 'Project Management', 'Replace Bridge Clock VR 24-0055').
• Pricing Columns: Includes fields for Prime Contractor and Subcontractor labor hours, labor price (US$), material price (CFM US$), and other costs.
• Total Price: A column for the total price per work item.
• Category (CAT): Assigns a category (e.g., 'A') to each work item.
• NSP Entries: Many work items are marked 'NSP' (Not Specified or Not Applicable) for labor hours and prices, indicating they may not require specific pricing or are not applicable in this context.
• Zero Values: All listed work items currently show zero values for labor hours, labor price, and material price, suggesting this is a template or a preliminary breakdown.

Bidders must use this spreadsheet to provide a detailed cost proposal for the services outlined. They need to fill in the labor hours, rates, and material costs for each applicable work item, ensuring the total price accurately reflects their bid. The 'NSP' entries and zero values indicate that bidders need to carefully review each item to determine where pricing is required and where it is not applicable for their specific bid.

Form / Attachment / Pricing Sheet

This document is IRS Form W-14, "Certificate of Foreign Contracting Party Receiving Federal Procurement Payments." It is used by foreign entities to certify their eligibility for exemptions from certain federal procurement taxes, specifically under section 5000C of the Internal Revenue Code, often related to international agreements or the origin of goods/services.

• Part I: Identification: Collects information about the foreign contracting party and the acquiring agency, including names, addresses, and contract numbers.
• Part II: Exemption Based on International Agreement: Allows for claiming relief from tax under an international agreement (e.g., a tax treaty).
• Part III: Exemption Based on International Procurement Agreement or Goods/Services Produced/Performed in the United States: Allows for claiming exemptions based on procurement agreements or if goods/services are produced/performed in the U.S.
• Part IV: Explanation: Requires detailed explanations for exemptions claimed, including specific agreements, countries, and methods for allocating contract prices.
• Part V: Certificate: A sworn statement by the foreign person or their representative, confirming the accuracy of the information and acknowledging tax obligations.

Foreign entities bidding on opportunities where this form is required must complete it accurately to claim any applicable tax exemptions. This form directly impacts the financial aspects of a contract for foreign parties and may influence their pricing strategies. Bidders should consult the form's instructions and potentially tax advisors to ensure correct completion. The acquiring agency will use this form to determine withholding obligations.

Form / Attachment / Pricing Sheet

This document is a "Contract Data Sheet" (Attachment III) that requires contractors to provide specific information about a contract. It is used to gather performance data and contract details.

• Contractor Name
• Contract Number, Type, and Date Completed
• Item/Service Description, Contract Quantity/Period of Performance
• Customer Name and POC (Person who can verify data)
• Address, Telephone, and FAX
• Performance Information section with seven questions regarding delivery schedule, compliance with specifications, modifications, terminations, protests, claims, quality awards, and corrective actions. Answers to questions marked with an asterisk require an explanatory narrative.

This form is likely to be used by contractors to report on past performance. Bidders may be required to complete and submit this or a similar form as part of their proposal, or the information gathered may be used in evaluating past performance.

Solicitation / RFP / RFQ

This solicitation is for Voyage Repair Availability for the USS MIGUEL KEITH (ESB-5) MSC CIVMAR. The work package is detailed in Attachment J-1.

• Provide all labor, materials, tools, and equipment to accomplish the Voyage Repair Availability.

• Specific work items and references will be provided via DoD Safe.

• Offerors must provide an itemized breakdown of the price for each item on the form provided in Attachment J-2.

• Growth Work (CLIN 0002) is pre-funded to accommodate anticipated growth work, not to exceed 20% of the total proposed cost for CLIN 0001. No work under this CLIN can commence without written authorization from the Contracting Officer.

• Period of Performance: March 23, 2026 - April 5, 2026.

• Place of Performance: Busan, S. Korea (PIER 8).

• Pricing Arrangement: Firm Fixed Price for both CLIN 0001 and CLIN 0002.

• Proposals are due by March 12, 2026, at 10:00 AM Korea Standard Time (KST).

• Award will be made on a Lowest Price Technically Acceptable (LPTA) basis, considering price, technical acceptability, and past performance.

• Technical acceptability will be based on the proposed labor hours and material costs, ensuring they are sufficient to understand and complete the scope of work.

• Past performance will be evaluated based on information in the Government's possession and information submitted by the offeror, focusing on timeliness, quality, cost control, and customer satisfaction within the last three years.

• The solicitation includes a Notice of Price Evaluation Preference for HUBZone Small Business Concerns.

• Offerors must submit a proposal in the format of SF 33, including a price breakdown (Attachment J-2).

• Past Performance Information (PPI) is required, detailing up to three recent contracts.

• Specific requirements for contractor access to federal facilities, IT systems, and background investigations are detailed, including the need for a Common Access Card (CAC).

• All offers must be in US Dollars and use the offeror's final, fully burdened rates, including all applicable fees and profit.