FY 26 Dorm Washers & Dryers Minot AFB

Statement of Work (SOW) / Performance Work Statement (PWS)

This Performance Work Statement (PWS) outlines the requirements for the "Install Washer & Dryers Project" at Minot Air Force Base, North Dakota.

• Primary Task: Furnish all labor, tools, materials, and supervision to remove and replace 84 double stack Washer & Dryers in Buildings 214 and 216. This includes new water hoses, drain lines, and dryer venting. The contractor is responsible for the proper disposal of all old appliances and related materials.

• Optional Task (CLIN): Remove and replace 36 washer & dryers (18 side-by-side units for Building 205 and 18 for Building 207). This also includes new hoses, drain lines, and venting, with contractor responsibility for disposal of old units.

• Workday: 0800 to 1600 hours, Monday through Friday.

• Disposal: Contractor must dispose of all materials and old appliances off-base; a dumpster will not be provided.

• All work must comply with applicable building standards and codes.

• Contractor must comply with all OSHA and NEC requirements.

• Contractor must protect existing furniture and building materials with industry-approved coverings.

• All trash must be disposed of in accordance with state laws, and recyclable materials should be recycled.

• Contractor must maintain environmental controls (e.g., keep doors shut, lights off when not in use).

• Period of Performance: 120 days after contract award.

• Work Completion: All physical work must be completed no later than 5 business days after the contract award.

• Location: Minot Air Force Base, ND 58705. Buildings 214, 216, 205, and 207.

• Site Conditions: Buildings 205 and 207 have three floors with stairwell access only (no elevators). Delivery truck staging is within 100' of the entrance; no loading dock or ramp is available.

• Personnel: Contractor employees identified as a threat will not be employed. Personnel clearance and access coordination with the Contracting Officer is required.

• Government Inspection: All work is subject to inspection and acceptance by Dorm Management before payment.

• Base Access: Specific procedures for entering the base via the South Gate are detailed, including requirements for vehicle registration, insurance, and REAL ID for personnel. Pass requests must be submitted no later than 10 days after contract award.

• Physical Characteristics: Specific dimensions, capacities, electrical requirements (240v/60hz/1), and adapter needs for washers and dryers are detailed. Adapters (50 amp to 15/20-amp) are required for double stack units in Buildings 214 & 216.

• Voluntary Protection Program (VPP): Contractors are required to familiarize themselves with Air Force VPP requirements.

Form / Attachment / Pricing Sheet

This document is a quote sheet (Attachment 3) for the opportunity FA452826QSP01. Bidders are expected to use this sheet to provide pricing for the specified supplies and services.

• Item 1: Bldg 214 & 216 Double Stack Washers and Dryers (Quantity: 84)
• Item 2: Washer Hoses, Dryer Vents, Adapters Pigtail (Quantity: 84)
• Item 3: Shipping, Installation, and Removal (Quantity: 1)
• Options:
  • Item 1001: Bldg 207 & 205 Washers and Dryers (Quantity: 18)
  • Item 1002: Washer Hoses, Dryer Vents (Quantity: 18)
  • Item 1005: Shipping, Installation, and Removal (Quantity: 1)
• Bidders are instructed to place their company name in a designated cell.
• The sheet includes fields for Price and Total Price for each item and subtotal.

This pricing sheet is critical for bidders to understand the specific items and quantities for which they need to provide a quote. It outlines both the primary requirements and potential options. Bidders must complete this sheet accurately to submit a compliant proposal. The "TOTAL" price is currently listed as 0.0, indicating it needs to be filled in by the bidder.

Form / Attachment / Pricing Sheet

This document is the Past and Present Performance Information Form (PPIF), a standardized questionnaire used to gather feedback on a contractor's performance for a specific contract. It is designed to be filled out by government personnel who have experience with the contractor's work.

• General Information: Collects details about the contractor, the project, contract number, dollar amount, and the contractor's role (Prime, Sub-Contractor, Key Personnel).
• Respondent Information: Gathers details about the individual completing the survey.
• Performance Information: Utilizes a rating scale (Exceptional, Very Good, Satisfactory, Marginal, Unsatisfactory, Neutral) to assess various aspects of the contractor's performance. Narrative explanations are required for Marginal or Unsatisfactory ratings.
• Specific Performance Areas: A checklist of 24 items covering areas such as management, personnel, quality control, problem resolution, schedule adherence, responsiveness to changes, and overall performance.
• Award Decision: Asks if the respondent would award another contract to the contractor.
• Remarks: A section for additional comments.

This form is crucial for bidders as it directly relates to the "Past Performance" evaluation factor in many solicitations. The information collected through this PPIF will be used by the government to assess the bidder's track record and likelihood of successful performance on the current opportunity. Bidders should be aware that their past performance is being documented and may be used in source selection.

Solicitation / RFP / RFQ

This is a Request for Quotation (RFQ) for commercial items to procure the removal and replacement of 84 double stack Washer & Dryers and associated hoses and venting in Buildings 214 & 216 at Minot AFB, ND. The acquisition is set-aside for 100% Total Small Business Concerns. The North American Industry Classification System (NAICS) code is 335220, with a business size standard of 1,500 employees.

• Removal and replacement of 42 double stack washer and dryer units for Building 214.

• Removal and replacement of 42 double stack washer and dryer units for Building 216.

• Replacements must include new water hoses, drain lines, and dryer venting from the appliance to the wall connection point.

• Contractor is responsible for the proper disposal of all old appliances and related materials.

• An optional CLIN exists for the removal and replacement of 18 side-by-side washers and dryers for Building 205, and 18 side-by-side washers and dryers for Building 207. Funds are not presently available for this optional CLIN, and award is not guaranteed.

• Contract Type: Firm-Fixed-Price (FFP)

• Period of Performance: 120 Days After Receipt of Order (ARO)

• Place of Delivery/Performance/Acceptance/FOB Point: F.O.B. Destination, Minot AFB, ND 58705

• Solicitation Issue Date: April 14, 2026

• Response Deadline: May 14, 2026, no later than 4:00 P.M. CDT

• Questions Deadline: April 27, 2026, no later than 4:00 P.M. CDT

• Quotes must be submitted via email to the points of contact listed.

• Quotes must be valid through October 1, 2026.

• Evaluation Criteria: Best value tradeoff between Past Performance and Price, following a pass/fail Technical Capability assessment.

• Technical Capability: Must meet all specifications in the attached SOW. Product literature and clear photographs are required for each unique item.

• Price: Must be submitted on the attached Quote Sheet.

• Past Performance: Evaluated based on various sources, including CPARS and contractor knowledge.

• Submission Requirement: One original quote and one redacted copy for technical evaluation (removing all company-identifying information).

• This acquisition is set-aside for 100% Total Small Business Concerns.

• Funds for the optional CLIN are not presently available.

• The Government reserves the right to not exercise the optional CLIN.

• No contract award will be made for optional CLINs until funds are available.

• The Government is not obligated to reimburse quoters for costs incurred in preparing quotations.

• Several attachments are referenced, including a PWS, Quote Sheet, WD, and PPIF.

Form / Attachment / Pricing Sheet

This document is a Wage Determination from the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It establishes the minimum wage rates and fringe benefits required for various occupations under the Service Contract Act for contracts performed in North Dakota, specifically in the counties of McHenry, Renville, and Ward.

• Occupational Codes and Titles: Lists numerous job classifications, from administrative support to transportation and miscellaneous occupations.
• Minimum Wage Rates: Specifies the hourly wage rate for each listed occupation.
• Fringe Benefits: Indicates that required fringe benefits follow the occupational listing. Specific benefits mentioned include:
  • Health & Welfare: $5.55 per hour (or $222.00/week or $962.00/month).
  • Health & Welfare EO 13706: $5.09 per hour (or $203.60/week or $882.27/month).
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (minimum wage adjustments).
• Vacation and Holidays: Outlines paid vacation (2-4 weeks based on service years) and a minimum of eleven paid holidays per year.
• Hazardous Pay Differential: Details an 8% differential for high-hazard positions and a 4% differential for low-hazard positions involving ordnance and explosives.
• Uniform Allowance: States that contractors must provide uniforms or reimburse employees for their cost, including cleaning.
• Conformance Process: Describes the procedure for classifying and determining wage rates for occupations not listed in the determination.

This document is crucial for any bidder responding to a solicitation that requires services in the specified North Dakota counties and is subject to the Service Contract Act. Bidders must use these wage rates and fringe benefits when calculating their labor costs for proposals. Failure to comply can lead to contract violations. The document also provides details on paid sick leave, vacation, holidays, and other benefits that must be factored into labor cost estimations.