JFY 2022 PROJECT J-875, BATTLE STAFF TRAINING FACILITY, U.S. NAVSUPPACT MCB CAMP BLAZ, GUAM

Questions & Answers / Clarifications

This document provides revised responses to pre-proposal questions and answers related to RFP N62742-26-R-1306 for the JFY 2022 Project J-875, Battle Staff Training Facility at U.S. NAVSUPPACT MCB Camp Blaz, Guam. It clarifies discrepancies and provides updated information for bidders.

• Elevations: Clarifies discrepancies in Top of Concrete (TOC) and Top of Footing (TOF) elevations across various drawings (SF107, SF108, A-301, SB101-SB103, A4/SF302, A1/A-301). Several elevations will be revised via future amendments.
• Foundations: Confirms foundations are required for Shear Wall SW3 and that stairwell foundations will be added to drawings SB101 through SB103.
• Dimensions & Quantities: Addresses inconsistencies in window widths (E1, E1.1, E1.2) and quantities (E2) between schedules and floor plans, with revisions planned via amendment.
• Hardware Sets: Resolves numerous discrepancies between specification sections (08 71 00) and drawing A-601 regarding hardware set assignments for various doors. Updates are reflected in Amendment 0002.
• Materials & Finishes: Clarifies material specifications for metal gates, door panel glazing, and entry canopy gutter molding. Confirms EF-4 finish application and addresses discrepancies in paint finishes.
• Applicability: States that wall guards and vinyl wall coverings are not applicable to this project.
• Quantities: Revises the Base Item quantity for Cement Deep Soil Mixing (CDSM) from 7,920 CY to 8,227 CY via amendment.

Many of the clarifications indicate that drawings and specifications will be revised via future amendments. Bidders should pay close attention to these upcoming amendments for updated project details. The document explicitly states that the RFP remains unchanged unless amended in writing on a Standard Form 30.

Amendment / Modification

This amendment (0003) modifies the solicitation N62742-26-R-1306 for the JFY 2022 Project J-875, Battle Staff Training Facility at U.S. NAVSUPPACT MCB Camp Blaz, Guam.

Key changes include:

• SF1442 (Solicitation, Offer and Award): Pages 1-2 and 3-5 have been deleted and replaced with new versions.

• Proposal Submission Deadlines:

  • The due date for PRICE PROPOSAL (PAPER) and TECHNICAL PROPOSAL (FACTORS 1, 2 AND 3) (PAPER) has been extended to July 7, 2026, 2:00 p.m., HST.
  • The due date for SUBCONTRACTING PLAN (PAPER) has been extended to July 8, 2026, 2:00 p.m., HST.

• Labor Rates: Section 00 73 00, paragraph 1.7, has been updated to state that Guam General Wage Decision No. GU20260002 Modification No. 1 (dated 05/18/2026) will remain in effect for the project duration unless modified. This wage decision is attached.

• SF1442 (Solicitation, Offer and Award) - Pages 1-5

• Section 00 21 16 - Instructions to Proposers

• Section 00 73 00 - Supplementary Conditions

Proposal and subcontracting plan submission deadlines have been extended. The labor rate notice has been updated.

Questions & Answers / Clarifications

This document provides pre-proposal questions and answers (Q&A) for RFP N62742-26-R-1306, concerning the JFY 2022 Project J-875, Battle Staff Training Facility at U.S. NAVSUPPACT MCB Camp Blaz, Guam. These responses are for informational purposes only and do not change the RFP unless formally amended.

• Geotechnical Specialist Qualifications (Q80): The government clarified that while the QC Geotechnical Specialist must be onsite full-time during the field verification program, day-to-day CDSM observation can be performed by the Contractor's Geotechnical Field Representative under the supervision of the QC Geotechnical Specialist. This aligns with Specification Section 31 62 00, Paragraph 1.7.1.
• Bid Submission Extension (Q81): The proposal due date has been extended to July 7, 2026, via a forthcoming amendment.
• Access Floor Panels (Q83): A question regarding proprietary "Concore All Steel Access Floor Panels with Factory Installed Carpet Posi-Tile" was addressed by referring to General Sheet Note #4 on Sheet A-610, indicating a potential change or clarification.
• Cable Tray Spacing (Q84): The government clarified that if conflicts arise between cable trays and Raised Access Floor (RAF) pedestals, wire mesh basket cable trays can be cut or altered to accommodate the RAF pedestal spacing, rather than providing parallel or vertically-stacked trays.
• Location Clarifications (Q85, Q86, Q87, Q88): Several questions regarding the identification and location of Area Distribution Network (ADN) and Area Distribution Frame (ADF) points on various drawings (TS101, TN601) were deferred for response.
• Room Finish Schedule Discrepancies (Q89, Q90, Q91): Questions arose regarding inconsistencies between revised ceiling types in drawings and the Room Finish Schedule on A-612, particularly concerning Amendment 0002. Responses were deferred.
• Wall Finish Designations (Q92, Q93, Q94): Clarifications were requested regarding discrepancies in wall finish designations (P-1B, AWP-1, AWP-2) between Room Finish Schedules and Interior Elevations. Responses were deferred.
• CDSM Quantity Discrepancy (Q134): A significant discrepancy was noted between the calculated CDSM volume from structural drawings (approx. 8,168 CY) and the quantity listed in the Bid Form (7,920 CY). Bidders were asked to clarify which quantity governs for bidding purposes. The answer was deferred.
• Covered Defense Information (Q145, Q146): The government confirmed that no project submittals or provided information will be marked as "covered defense information" (CDI).

This document provides clarifications and addresses potential ambiguities in the original solicitation. Notably, it confirms an extension to the bid submission deadline and provides guidance on specific technical requirements, such as the role of the Geotechnical Specialist and cable tray installation. Several other questions were deferred, indicating that further clarification may be forthcoming in subsequent notices or amendments.

Questions & Answers / Clarifications

This document contains pre-proposal questions and answers related to Solicitation N62742-26-R-1306 for the JFY 2022 Project J-875, Battle Staff Training Facility at U.S. NAVSUPPACT MCB Camp Blaz, Guam. It provides clarifications and revised responses to previously issued questions.

• Chiller Cooling Capacity (Q11): Revisions to Drawing MH700 via Amendment 0002 now indicate total cooling capacity and a minimum of two passes for shell-and-tube evaporators. Future amendments will clarify if brazed plate & frame evaporators are permitted.
• RAF-1 Tile Finish (Q12): The factory-laminated porcelain access floor panels have PVC edge banding that appears like grouted tiles. The 24"x24" dimension includes the PVC edge band. The actual tile size (23.62"x23.62") accounts for the grout joint to achieve the 24"x24" size.
• Smoke Control (Q14): It is confirmed that there is no smoke control system in the project. The Schedule of Special Inspection was revised in Amendment 0002 to reflect this.
• Site Visit Sign-In Sheet (Q18): The site visit sign-in sheet is attached to this notice.
• Drawing Discrepancies (Multiple Questions): Numerous questions (e.g., Q19-Q79) highlight discrepancies between specifications, schedules, and drawings regarding elevations, dimensions, materials, hardware sets, and locations. Many of these have "Response deferred" as the answer, indicating further clarification or amendment is pending.

This document provides critical clarifications that may affect bidder understanding of project requirements, materials, and specifications. Bidders should review these Q&As carefully, especially those that have been revised or are pending further amendment, to ensure accurate proposal preparation. The "Response deferred" answers indicate that some details are still under review and may be addressed in future amendments.

Other / Unclassified

This document is a Project Table of Contents for "JFY 2022 PROJECT J-875, BATTLE STAFF TRAINING FACILITY" located at U.S. NAVSUPPACT MCB CAMP BLAZ, GUAM. It lists the various divisions and sections of the project specifications, including procurement and contracting requirements, general requirements, existing conditions, concrete, masonry, metals, wood, plastics, composites, thermal and moisture protection, openings, finishes, specialties, furnishings, special construction, conveying equipment, fire suppression, plumbing, HVAC, integrated automation, electrical, communications, electronic safety and security, earthwork, exterior improvements, utilities, and other relevant project specifications.

This document provides a detailed outline of the various technical specifications and requirements for the construction of the Battle Staff Training Facility. Potential bidders can use this table of contents to quickly identify the scope of work and specific areas of the project that may be relevant to their capabilities and interests. It helps in understanding the overall structure and complexity of the project's technical documentation.

Amendment / Modification

This amendment (0002) to Solicitation N62742-26-R-1306 modifies several aspects of the original solicitation for the Battle Staff Training Facility project:

• Solicitation, Offer and Award (SF1442): Pages 1-2 and 3-5 have been deleted and replaced with updated versions.
• Submission Deadlines:
  • Price Proposal (Paper) and Technical Proposal (Factors 1, 2, and 3) due date changed to June 23, 2026, 2:00 p.m. HST.
  • Subcontracting Plan (Paper) due date changed to June 24, 2026, 2:00 p.m. HST.
• Questions Submission Deadline: The deadline for submitting questions regarding the solicitation has been updated. The Government may not respond to questions submitted after June 2, 2026.
• Specifications: A summary of changes to the specifications is attached.
• Numerous Section Revisions: Many sections of the specifications have been deleted and replaced with revised versions dated 04-27-2026. These include updates to:
  • List of Drawings (revision date 4/27/2026)
  • Instructions to Proposers
  • Administrative Requirements
  • Construction and Facility Support Contract Management System (eCMS)
  • Cost-Loaded Network Analysis Schedules (NAS)
  • Submittal Procedures
  • Quality Controls
  • Special Inspections
  • Temporary Environmental Controls
  • Closeout Submittals
  • Plant-Precast Concrete Products for Below Grade Construction
  • Fluid-Applied Roofing System
  • Door Hardware
  • Gypsum Board
  • Toilet Compartments
  • Wall and Door Protection
  • Fire Extinguishers
  • Furniture, Fixtures and Equipment (FF&E) Package
  • Seismic Control for Nonstructural Components
  • Basic Mechanical Materials and Methods
  • Commissioning of Mechanical [and Plumbing] Systems
  • BACnet Direct Digital Control for HVAC and Other Building Control Systems
  • Chilled, Chilled-Hot, and Condenser Water Piping Systems
  • Control Systems Utility Monitoring and Control System Testing
  • Utility Monitoring and Control System (UMCS) Front End and Integration
  • Building Telecommunications Cabling System
  • Interior Fire Alarm and Mass Notification System, Addressable
  • Earthwork
  • Radon Mitigation
  • Pavement Markings
  • Fuel Systems Piping (Non-Hydrant)
  • Factory-Fabricated Fuel Storage Tanks
  • Underground Electrical Distribution
  • Telecommunications Outside Plant (OSP)

This amendment affects numerous sections of the original solicitation, including the SF1442 form, various specification sections, and submission deadlines.

Proposal submission deadlines have been extended. Offerors must review all updated sections and ensure their proposals reflect the revised requirements and deadlines. The deadline for submitting questions has also been adjusted.

Form / Attachment / Pricing Sheet

This document is a "List of Sheets" which serves as an index for the entire set of drawings associated with the "J-875 Battle Staff Training Facility" project. It provides a comprehensive overview of all included drawings, organized by discipline and sheet number.

• Drawing Titles: Lists the title of each drawing.
• Sheet Numbers: Provides the unique identifier for each drawing.
• Discipline/Area: Indicates the relevant trade or area of the project (e.g., Civil, Structural, Architectural, Electrical, Mechanical, Plumbing, AV, Special Systems).
• Revision Information: Notes any revisions made to the drawings.

This document is crucial for bidders to understand the full scope of the project and to ensure they have all necessary drawings for accurate bidding and proposal preparation. It helps in navigating the extensive documentation and identifying all relevant information for their specific scope of work.

Questions & Answers / Clarifications

This document, Notice No. 3, provides pre-proposal questions and answers related to RFP N62742-26-R-1306 for JFY 2022 Project J-875, Battle Staff Training Facility, U.S. NAVSUPPACT MCB Camp Blaz, Guam. It clarifies specific points and addresses concerns raised by potential offerors.

• Proposal Due Date Extension: Due to widespread impacts from Typhoon Sinlaku, which disrupted normal business operations and subcontractor coordination, the government will issue an amendment extending the proposal due date to June 23, 2026. The deadline for submitting questions will be revised to June 2, 2026.
• Complementary Pricing Information: Offerors are instructed to include prices for Unit Priced SLIN 0001AB and SLIN 0001AC within the Complementary Pricing Information for CLIN 0001. "Other costs" (Line iii) under CLIN 0001 is intended for items not covered by the facility or site work, such as cybersecurity features or geospatial mapping.
• Proposal Submission Method: The government has considered the request to allow electronic submission via PIEE with hard copies to follow, but the solicitation requirements for multiple hard-copy volumes with accompanying electronic submission on CD remain unchanged.
• Soilcrete Column Alternative: The government will not allow an alternative to the 4' soilcrete column; proposals should be based on the solicited design. Value Engineering Change Proposals may be explored after award.

This notice confirms an extension to the proposal due date and the question submission deadline. It also clarifies pricing and submission requirements. However, the core submission method and design specifications remain unchanged from the original solicitation.

Questions & Answers / Clarifications

This document provides revised responses to pre-proposal questions and answers for RFP N62742-26-R-1306, "JFY 2022 PROJECT J-875, BATTLE STAFF TRAINING FACILITY, U.S. NAVSUPPACT MCB CAMP BLAZ, GUAM." It is for informational purposes only, and the RFP remains unchanged unless amended in writing.

• MEC / UXO Requirements: Specification Section 01 57 19.03 20 will be replaced with Section 01 57 19.03 21 ("Supplemental Temporary Environmental Controls – Secretary of the Navy (SECNAV) Explosive Safety Risk Acceptance Within Joint Region Marianas") in a forthcoming amendment.

• Plant Precast Concrete Products - Reinforcement: The requirement for epoxy-coated reinforcing will be deleted from Section 03 42 13.00 10 in a forthcoming amendment. Bidders should confirm if epoxy-coated reinforcement is not specifically called out in the product detail in the drawings.

• Relevant Construction Project Experience: The Government will evaluate relevant experience based on the established criteria in the solicitation. Offerors must submit projects that best demonstrate experience similar in size, scope, and complexity to the defined project, even if they are in the $20 million range instead of the stated $30 million threshold.

• Specifications regarding MEC/UXO requirements and epoxy-coated reinforcement will be updated via amendment.

• The method for submitting initial proposal volumes (PIEE vs. physical copies with wet signatures) remains unchanged as per the original solicitation instructions.

Questions & Answers / Clarifications

This document provides pre-proposal questions and answers related to RFP N62742-26-R-1306 for the JFY 2022 Project J-875, Battle Staff Training Facility at U.S. NAVSUPPACT MCB Camp Blaz, Guam. The RFP remains unchanged unless amended via Standard Form 30.

• MEC / UXO Requirements: Clarification sought on whether Spec Section 01 57 19.03 21 ("Supplemental Temporary Environmental Controls – SECNAV Explosive Safety Risk Acceptance Within Joint Region Marianas") applies, as Spec Section 01 57 19.03 20 is considered outdated. (Response deferred).

• Plant Precast Concrete Products - Reinforcement: Confirmation requested regarding the requirement for epoxy coated reinforcement, given the project site's location above the water table and local manufacturers' practices. (Response deferred).

• Bid Due Date Extension: A request for a one-week extension to the bid due date (from June 16, 2026, to June 23, 2026) was made due to disruptions caused by Typhoon Sinlaku, impacting power, water, and communications. The government confirmed the proposal due date will be extended to June 23, 2026, in a forthcoming amendment.

• Relevant Construction Project Experience: Clarification requested on whether construction projects in the $20 million range would be considered relevant experience, as opposed to the stated $30 million threshold. (Response deferred).

• Site Visit Information Submittal: Due to typhoon-related disruptions, an extension for the site visit information submittal was requested. The government extended the deadline to April 24, 2026, 2:00 p.m. HST, and will continue to accept forms after this date, though timely processing for site visit attendance cannot be guaranteed.

• The proposal due date has been extended to June 23, 2026, via a forthcoming amendment.

• The deadline for submitting site visit information has been extended to April 24, 2026, with continued acceptance thereafter, though attendance at the site visit is not guaranteed for late submissions.

Amendment / Modification

This amendment (0001) to Solicitation N62742-26-R-1306 modifies several sections:

• Section 00 21 16 - Instructions to Proposers: Corrected a typo in paragraph 1.2.a.(4) regarding DFARS 252.236-7010.
• Section 00 22 00 - Supplementary Instruction, Document 00 22 00 Evaluation Factors for Award:
  • Revised the first paragraph of 1.1 "INTENT TO AWARD WITHOUT DISCUSSIONS" to clarify the government's intent to evaluate and award without discussions, except for clarifications.
  • Replaced "DOCUMENT 00 22 00 - ATTACHMENT A" with a revised version (pages 1-2).
  • Replaced "DOCUMENT 00 22 00 - ATTACHMENT B" with a revised version (pages 1-4).
• Section 00 21 16 - Instructions to Proposers (Site Visit):
  • Clarified that clauses 52.236-2 and 52.236-3 will be included in the contract.
  • Scheduled a one-time pre-proposal site visit for May 19, 2026, at 9:00 a.m. Chamorro Standard Time (ChST). Photography requires prior approval and a valid Camera Pass.
  • Listed required forms for site visit access, including MCBCB VCC Base Access Request Forms, SECNAV 5512/1 Form, Naval Base Guam Foreign National Base Access Request Form, and FN Biometric Data Form.
  • Provided submission instructions and deadlines for site visit access information (April 17, 2026, 2:00 p.m. Hawaii Standard Time).
  • Emphasized the need for attendees to wear Personal Protective Equipment (PPE) due to the active construction site.
• Section 00 21 16 - Instructions to Proposers (Submission Requirements):
  • Updated the deadline for Price Proposal submission to June 16, 2026, 2:00 p.m. H.S.T.
  • Updated the deadline for Technical Proposal submission to June 16, 2026, 2:00 p.m. H.S.T.
  • Updated the deadline for Subcontracting Plan submission to June 17, 2026, 2:00 p.m. H.S.T.

Sections 00 21 16 and 00 22 00 have been modified. Attachments A and B have been revised and replaced.

Proposal submission deadlines for Price and Technical Proposals remain June 16, 2026, while the Subcontracting Plan deadline is June 17, 2026. The site visit date is May 19, 2026. Offerors must acknowledge these changes and ensure their submissions comply with the revised requirements.

Justification and Approval (J&A) for Other Than Full and Open Competition

This document justifies the use of other than full and open competition for the acquisition of King-Fisher brand fire alarm radio transmitters. The brand name is essential to meet the activity's requirements, precluding consideration of products from other manufacturers. This justification covers the portion of acquisitions specifying these transmitters and is valid until July 10, 2027.

• The requirement is for King-Fisher brand fire alarm radio transmitters to ensure reliable and code-compliant fire alarm protection.

• Equipment must be listed or approved by a Nationally Recognized Testing Laboratory (NRTL) recognized by OSHA and compatible with the existing Base receiving equipment (Factory Mutual Laboratories Approved King-Fisher Company KFRA-C Emergency Alarm Receiver).

• Equipment must utilize narrowband radio communication meeting national Telecommunications and Information Administration (Fire AlaNTIA) requirements.

• A maximum of 195 King-Fisher fire alarm transmitters are anticipated for installation at Naval Base Guam (NBG).

• The estimated FY22 dollar value for NBG transmitters is redacted.

• There are 18 FY23 and FY24 projects at NBG requiring King-Fisher fire alarm transmitters, with an estimated total value of redacted.

• Projects include MAMIZU (Japan-funded) and Military Construction (MCON).

• A SAM.gov announcement was made on April 7, 2022, to identify other potential sources, but no responses were received.

• The Contracting Officer has determined the anticipated cost to be fair and reasonable.

• This is a justification for other than full and open competition, citing 10 U.S.C. 3204(a)(1) and FAR 6.302-1 ("Only one responsible source").

• Compatibility with existing King-Fisher receivers is critical. Using non-King-Fisher transmitters would require purchasing new receivers, leading to substantial duplication of cost and potential delays.

• NAVFAC Marianas maintenance workers are factory-trained on King-Fisher systems, and a non-King-Fisher system would not be supportable by existing personnel.

• Future projects will continue to assess market availability for compatible alternatives, but NAVFACSYSCOM Pacific does not currently intend to compete future contracts for these specific supplies/services.

Other / Unclassified

This document is a Class Justification and Approval (CJ&A) for the brand-name procurement of Johnson Controls Incorporated (JCI) METASYS Building Automation System commercial equipment. This justification is for the Marine Corps' Defense Policy Review Initiative (DPRI) Program networked Direct Digital Control (DDC) system at Andersen Air Force Base (AAFB), Marine Corps Base Camp Blaz (MCBCB), and Naval Base Guam (NBG).

This document explains why the government is limiting competition to JCI METASYS Building Automation Systems for future projects (FY2026-2031) involving the installation's networked Facilities Related Control Systems (FRCS), also known as the JCI Metasys Energy Management Control System (EMCS). The rationale for this sole-source justification includes:

• Standardization and Interoperability: To maintain consistency with the existing 134 JCI METASYS systems already in place at AAFB, MCBCB, and NBG, and to avoid significant costs and delays associated with integrating new systems and obtaining new cybersecurity authorizations (ATO).
• Cybersecurity: To maintain a defensible cybersecurity posture and avoid risks associated with introducing non-conforming hardware or software into the EMCS Network.
• Operational Efficiency: To allow controllers to be programmed from a central station, reducing maintenance, repair, and energy costs, and avoiding the need for staff to become proficient with multiple manufacturers' systems.
• Cost-Effectiveness: The government determined that replacing existing JCI systems with another manufacturer's product would not be cost-advantageous. A Business Case Analysis (BCA) indicated that using JCI avoids substantial duplication of cost.

Efforts to Solicit Offers: An announcement was made on SAM.gov on February 19, 2025, to identify other potential sources. Two responses were received:

• One vendor's equipment used the Niagara framework and had drivers for JCI software but did not provide sufficient technical data for evaluation.
• Another vendor expressed interest but had not yet provided requested information.

The Project Manager and Contracting Officer determined that these submissions did not meet the salient characteristics specified, and therefore, JCI remains the only responsible source.

Future Competition: Market research will be conducted for future projects to identify new technologies and potential sources. The government will consider any compatible products submitted during future source selection processes.

Solicitation / RFP / RFQ

This is a Request for Proposal (RFP) for the JFY 2022 Project J-875, Battle Staff Training Facility, located at U.S. NAVSUPPACT MCB Camp Blaz, Guam. The procurement is unrestricted, with a NAICS Code of 236220 (Commercial and Institutional Building Construction). The estimated cost is between $25,000,000 and $100,000,000.

The solicitation details the requirements for the construction of a Battle Staff Training Facility. Specific work areas include:

• Base Item (CLIN 0001AA): Entire work for WON 1696746.

• Base Item (CLIN 0001AB): Removal of soft, yielding, or unsatisfactory soil materials and placement of satisfactory fill.

• Base Item (CLIN 0001AC): Installation of Cement Deep Soil Mixing (CDSM) for ground improvements.

• Option Item 1 (CLIN 0002): Pavilion construction, including site development and utilities.

• Option Item 2 (CLIN 0003): Standby Back-up Generator, Generator Building, Fuel Storage Yard, and Sand Filter, including site development and utilities.

• Planned Modification (CLIN 0004AA): Furniture, Fixtures and Equipment (FF&E) and Specialty Collateral Equipment (CEQ).

• Planned Modification (CLIN 0004AB): Handling and Administrative Rate (HAR) not to exceed 5%.

• Contract Type: Firm-fixed price.

• Period of Performance: Within 15 calendar days of award, completion within 1157 calendar days after notice to proceed.

• Performance Bonds: Required.

• Estimated Value: $25,000,000 - $100,000,000.

• Proposal Submission Deadline: June 16, 2026, 2:00 PM Hawaii Standard Time (HST).

• Submission Location: Specified in Section 00 21 16.

• Evaluation Criteria: Lowest evaluated price of proposals meeting acceptability standards for technical evaluation factors. Technical evaluation will be based on Experience, Past Performance, and Safety. An "ACCEPTABLE" rating in all technical factors is required for award.

• Site Visit: Scheduled for May 19, 2026, 9:00 a.m. Chamorro Standard Time (ChST).

• This procurement is unrestricted.

• Small Business Subcontracting Plan: Required for large businesses, with specific targets for SB, SDB, HUBZone SB, WOSB, and SDVOSB.

• Multiple awards will not be made.

• CLINs 0001-0003 will be funded with Japan Fiscal Year 2022 funding.

• Option items may be exercised at the time of award or within 365 calendar days of contract award.

• Offerors must wear Personal Protective Equipment (PPE) during the site visit.

Specifications / Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the comprehensive technical specifications and requirements for the J-875 GOJ – Battle Staff Training Facility project, located at U.S. NAVSUPPACT Marine Corps Base Camp Blaz, Guam. The project is identified as "JFY 2022 PROJECT J-875".

The project encompasses a wide range of construction and installation tasks detailed across numerous divisions, including:

• General Requirements: Procurement, work restrictions, price and payment procedures, submittals, sustainability, waste management, and quality control.

• Building Systems: Specifications for concrete, masonry, metals, wood, thermal and moisture protection (including EIFS, roofing, firestopping, sealants), openings (steel and aluminum doors/frames, hardware), finishes (gypsum board, flooring, acoustical ceilings/panels, paints), specialties, furnishings, and special construction.

• Mechanical Systems: Plumbing, HVAC (air distribution, controls, insulation, chillers), and fire suppression systems.

• Electrical Systems: Interior and exterior lighting, power distribution, transformers, switchboards, motor control centers, adjustable speed drives, automatic transfer switches, and lightning protection.

• Communications & Safety: Building telecommunications cabling, audio-visual systems, public address systems, two-way communication, interior fire alarm, and mass notification systems.

• Site Work & Utilities: Earthwork, demolition, radon mitigation, termite control, utilities (water, sanitary sewer, stormwater, fuel systems), underground electrical distribution, and exterior improvements (pavement, landscaping, fencing).

• Specialized Systems: Integrated automation (cybersecurity for facility-related control systems), seismic control for nonstructural components, and hydraulic passenger elevators.

• Indoor Air Quality: Products must meet standards like UL 2818 Greenguard Gold, SCS Global Services Indoor Advantage Gold, CDPH Section 01350, and SCAQMD Rule 1168.

• Recycled Content: Minimum recycled content is specified for various materials.

• Seismic Requirements: Detailed requirements for seismic bracing and control for mechanical and electrical systems.

• Cybersecurity: Strict adherence to cybersecurity requirements for facility-related control systems (e.g., NIST SP 800-82, DODI 8500.01).

• Testing & Quality Control: Extensive testing, inspection, functional performance testing, commissioning, and quality control measures are mandated throughout the project.

• Materials & Installation: Materials must be new and meet specified standards. Installation must conform to industry standards (ASTM, IEEE, NEMA, NFPA, UL, etc.) and manufacturer's instructions.

• Training & Warranty: Training for government personnel and a minimum one-year warranty are required.

• Work Order No.: 1696746

• Project Title: J-875 GOJ – BATTLE STAFF TRAINING FACILITY

• Prepared By: ASMD LLC

• Approved By: NAVFAC PACIFIC, 10 APRIL 2026

U.S. NAVSUPPACT MCB CAMP BLAZ, GUAM.

This document contains technical specifications and does not include proposal submission or evaluation criteria.

Other / Unclassified

This document is a Class Justification and Approval (CJ&A) for the brand-name use of Schneider Electric PowerLogic ION8650-B (64MB) electricity utility revenue meters for the Marine Corps' defense policy review initiative program. It authorizes the use of these specific meters for projects requiring connection to the existing Advanced Metering Infrastructure (AMI) network at Andersen Air Force Base, Marine Corps Base Camp Blaz, and Naval Base Guam.

This document explains why the government is justifying the use of a specific brand-name meter (Schneider Electric PowerLogic ION8650-B) and not pursuing full and open competition. Key reasons include:

• Standardization and Interoperability: To maintain standardization and interoperability with the existing AMI network, minimizing costs and potential cyber vulnerabilities.
• Cybersecurity: To maintain a defensible cybersecurity posture and avoid the costs and delays associated with obtaining new Authority to Operate (ATO) for non-conforming equipment.
• Cost-Effectiveness: To reduce government IT cybersecurity risks and avoid significant costs associated with obtaining new ATOs or sustaining non-conforming equipment.
• Software Compatibility: To maximize utilization of existing government-licensed Schneider ION Enterprise DAS software for configuration and programming.
• Operational Efficiency: To avoid the operational burden and cost of training staff on multiple meter types and maintaining diverse equipment.

This CJ&A supersedes a previous one and is valid until September 30, 2030. The government conducted market research and found no other responsible sources that could meet the requirements for compatible performance and interoperability with the existing system. The estimated total value for the use of these meters through September 30, 2030, is provided, along with specific project examples in Appendix A.

Class Justification and Approval (for use of other than full and open competition)

This document justifies the use of a sole-source procurement for Federal Signal Mass Notification Remote Terminal Unit UVRI-B UltraVoice® for 56 DPRI Guam Projects. The government requires this specific brand name product due to its essential role in bridging Wide Area (Outdoor) and indoor mass notification systems, interfacing with fire alarm panels, and meeting specific operational and accreditation requirements (UFC, PSPEC, ATO) that only this system currently satisfies.

• Federal Signal Mass Notification Remote Terminal Unit UVRI-B UltraVoice® for indoor use.

• Functionality includes receiving transmission signals from the Mass Notification System and disseminating internal broadcasting messaging for emergency situations.

• Must interface with associated building's fire alarm panel and provide remote control status and monitoring.

• Key features include 7 built-in warning signals, flexible communications (IP, radio, cellular), 12VDC/120/240VAC operation with battery backup, multiple siren tones, storage for over 4000 voice/tone messages, IP interface, built-in amplifier/speaker, optional external amplifier, relay outputs, multiple inputs for alerts, public address interface, fire panel interface, self-diagnostics, and secure encryption.

• The action involves 56 fixed-price construction contracts.

• The estimated cost for the 56 units is not fully specified but is based on a unit cost provided by the COR.

• The government has determined the anticipated cost to be fair and reasonable.

• This document is a justification for sole-source procurement, not a solicitation for proposals.

• Market research was conducted on April 23, 2020, via SAM.gov, but no other sources were identified.

• This is a sole-source justification, indicating no set-aside or open competition is planned for this specific procurement.

• Awarding to another source would result in substantial duplication of costs.

• Future projects will conduct market surveys to identify new technology and potential sources for compatible equipment.

• The document is approved under statutory authority 10 U.S.C. 2304(c)(1).

Other / Unclassified

This document is a Class Justification and Approval for Other Than Full and Open Competition for only one responsible source, specifically for brand name Knox Box first responder's high-security key lock boxes and Knox padlocks for projects at Marine Corps Base Guam (MCBG). The justification is valid until March 31, 2025.

This document explains why the government intends to sole-source the procurement of Knox Box products. It details the requirement for these specific items due to their compatibility with existing systems and adherence to NFPA 1 standards, which mandate UL 1037 compliance and compatibility with the Authority Having Jurisdiction's (AHJ) master key. The document outlines that alternative products would result in increased costs and operational complexities for the fire departments. Bidders interested in providing similar security solutions should note the specific requirements and the government's rationale for limiting competition to Knox products. Attachment A provides a list of projected projects on MCBG that will utilize these Knox Boxes and padlocks.

Form / Attachment / Pricing Sheet

This document comprises a "List of Sheets" and detailed structural drawings and schedules for the JFY 2022 Project J-875, Battle Staff Training Facility at U.S. NAVSUPPACT MCB Blaz, Guam. The "List of Sheets" serves as an index to all project drawings, organized by discipline, and includes sheet numbers, drawing numbers, NAVFAC drawing numbers, and titles. The structural drawings detail plans, sections, and schedules for foundations, slabs, framing, columns, beams, walls, and reinforcing steel.

• List of Sheets: Contains 468 sheets indexed by discipline (General, Survey, Geotechnical, Civil, Landscape, Structural, Architectural, Interior Design, Fire Protection, Plumbing, Mechanical, Electrical, Telecommunications, Two-Way Communication, Audio-Visual).
• Foundation Plans: Detail footing types, dimensions, reinforcing schedules, soilcrete columns, and ground improvement.
• Slab Plans: Illustrate slab types, thicknesses, and reinforcing for various areas and elevations.
• Framing Plans: Depict second-floor and roof framing, showing beam and column layouts.
• Structural Details: Provide specific reinforcing details for walls, slabs, beams, columns, foundations, and construction joints.
• Structural Schedules: Contain data for beams, column footings, wall footings, columns, and shear walls.

This document is essential for bidders to understand the full scope of project documentation and to prepare accurate bids. The "List of Sheets" allows for quick location of specific drawings. The structural drawings and schedules provide precise specifications for all concrete and reinforcing steel work, including foundation design, soil improvement, slab dimensions, beam/column/shear wall details, and construction methods. Bidders must review these carefully to estimate material quantities, labor, and ensure compliance with design criteria.

Form / Attachment / Pricing Sheet

This document contains architectural drawings, including site plans, floor plans, elevations, sections, details, and schedules for the Battle Staff Training Facility project (JFY 2022 Project J-875). It provides detailed information on the building's layout, construction, materials, and finishes.

• Architectural Symbols and Abbreviations: Defines common symbols and abbreviations used throughout the drawings.
• General Sheet Notes: Outlines important project-wide information, including demolition, material requirements, field verification, and coordination.
• Site Plan: Shows the overall site layout, including buildings, parking, landscaping, and utility trenches.
• Floor Plans: Detailed plans for each floor, including room layouts, door and window schedules, and partition types.
• Elevations and Sections: Illustrates the exterior appearance and internal cross-sections of the building.
• Details: Provides specific construction details for elements such as walls, foundations, doors, windows, railings, and signage.
• Schedules: Includes schedules for doors, windows, louvers, partitions, finishes, and FF&E (Furniture, Fixtures, and Equipment).
• Fire Protection Systems: Details for sprinkler systems and fire alarm/mass notification systems.

This comprehensive set of architectural drawings is crucial for bidders to understand the full scope of the project. It details the physical requirements, materials, finishes, and systems to be installed, enabling accurate bidding and project planning. Bidders must review these drawings to comprehend the construction, layout, and specifications of the Battle Staff Training Facility.

Form / Attachment / Pricing Sheet

This document contains detailed technical drawings and specifications for the Battle Staff Training Facility project, specifically focusing on the plumbing and HVAC systems. It includes comprehensive plans, schematics, details, and schedules necessary for the installation and understanding of these critical building systems.

Plumbing Plans (Part 1):

• Detailed layouts for first and second floors, and roof.
• Legends, abbreviations, and general notes.
• Specific plans for areas A through F.
• Enlarged isometric views and overall isometrics.
• Schedules for fixtures, water heaters, pumps, and expansion tanks.

HVAC Drawings (Part 2):

• HVAC Duct Plans (Second Floor - Area 'F').
• Mechanical Site Plan (Generator/Tank).
• Mechanical Sections and Details.
• Fuel Oil System Details.
• HVAC Schematics (Control Diagrams, Riser Diagrams).
• Mechanical Schedules (AHU, DOAS, Coils, Chillers, Pumps, VAV Boxes, Exhaust Fans, CRAC Units, etc.).
• HVAC Piping Plans (First and Second Floors).
• Enlarged Mechanical Room Floor Plans.

These documents are essential for bidders involved in the plumbing and HVAC aspects of the project. They provide the technical details required to:

• Accurately estimate costs.
• Develop installation strategies.
• Understand the scope of work, including pipe and duct layouts, equipment specifications, and control systems.
• Ensure compliance with all specified standards and codes.
• Detail requirements for fuel oil systems and associated components.

Bidders must thoroughly review all plans, schedules, and details to prepare compliant and accurate proposals.

Form / Attachment / Pricing Sheet

This document comprises several attachments related to the "Battle Staff Training Facility" project (JFY 2022 Project J-875, Contract No. 1696746), providing detailed electrical specifications, legends, schedules, and power distribution plans. It serves as a critical reference for bidders to understand the electrical scope of work.

• Electrical Legends and Notes: Defines symbols, abbreviations, and general requirements for electrical installations, including material provisions, wiring standards, and specific guidelines for conductor sizing and arc-flash labeling.
• Lighting Fixture and Control Schedules: Details specific lighting fixtures (e.g., LED types, voltage, wattage, dimming capabilities) and the control logic for various lighting zones, including schematics for control networks and contactors.
• Power Distribution Plans: Illustrates power distribution layouts for different areas of the facility, including generator and pavilion power, mechanical rooms, and detailed electrical components.
• One-Line Diagrams and Panelboard Schedules: Provides a single-line representation of the electrical system and detailed schedules for panelboards, outlining circuit breaker information, load descriptions, and capacities.
• Cable Schedule: Lists details for various electrical connections, including cable numbers, source/destination points, load descriptions, lengths, and wire sizes.

Bidders must thoroughly review all sections of this document to accurately interpret electrical drawings and specifications. Understanding the legends, abbreviations, fixture requirements, control logic, power distribution, panelboard details, and cable routing is essential for correct material estimation, installation planning, cost calculation, and ensuring compliance with project requirements. This document directly impacts the electrical scope of work and the overall bid.

Forms / Attachments / Pricing Sheets

This document contains the "General Notes, Abbreviations & Symbols Legend" for the "Battle Staff Training Facility" project (JFY 2023 Project J-875). It serves as a reference for understanding the symbols, abbreviations, and general installation requirements used throughout the project's drawings.

• General Notes: Outlines installation compliance with various Unified Facilities Criteria (UFC), National Electrical Code (NEC), NFPA standards, and other relevant codes and manufacturer requirements. It also details conductor types, grounding requirements, and workmanship standards.
• Two Way Communications Symbol List: Defines symbols used for two-way communication systems, including emergency call stations, master stations, UPS, controllers, and instructional signs.
• Abbreviations: Provides a comprehensive list of abbreviations used in the electrical and communication systems drawings.

This document is crucial for bidders to accurately interpret all other drawings and specifications related to the electrical and communication systems for the Battle Staff Training Facility. Understanding these symbols, abbreviations, and general notes is essential for preparing a compliant and accurate bid and for successful project execution.

Justification for Other Than Full and Open Competition

This document justifies and approves the brand-name acquisition of Kaba-Mas X-10 dial combination locks for the Marine Corps' Defense Policy Review Initiative (DPRI) Program. This justification is for using other than full and open competition.

• Acquisition of GSA-approved dial combination locks meeting Federal Specification FF-L-2890B Types I-VI.

• Locks are required for pedestrian doors and doors to secure spaces, in accordance with DOD Manual 5200.01 and OPNAVINST 5530.13D.

• The Kaba-Mas X-10 locks are specified due to their unique self-powered kinetic energy design, which eliminates the need for batteries and reduces maintenance.

• The authority for this justification expires on 31 January 2030.

• Estimated quantity of locks is 25.

• Estimated cost per lock is [REDACTED].

• This document is a justification for sole-source procurement, not a solicitation for proposals.

• This procurement is being conducted using other than full and open competition, citing FAR 6.302-1 (Only one responsible source).

• The government conducted market research and a Sources Sought Notice (SSN) on 20 November 2024, closing 5 December 2024.

• Two responses were received: one vendor indicated interest but was developing information, and another provided a Capability Statement for a different type of lock not meeting requirements.

• The Kaba-Mas X-10 is identified as the only lock meeting the government's requirements.

• The government determined the anticipated cost to be fair and reasonable.

• Future competition is not intended at this time, but the market will be monitored for emerging technologies or sources.

• Attachment A lists projected DPRI projects utilizing these locks.

Class Justification and Approval (CJ&A)

This document authorizes and approves the brand-name use of Elevator Controls Corporation (ECC) manufactured elevator control systems (Pixel Traction Control and Pixel Hydraulic Control) for the Marine Corps' Defense Policy Review Initiative (DPRI) Guam Program. These systems are required for traction and hydraulic elevators to be installed in six (6) buildings in Guam, with primary locations at Marine Corps Base Camp Blaz (MCBCB), Naval Base Guam (NBG), and Andersen Air Force Base (AAFB). This CJ&A supersedes a previous one and is valid until September 30, 2030.

• Procurement of ECC's Pixel Traction Control and Pixel Hydraulic Control systems.

• Systems include hardware components (e.g., Controller User Interface, HMI) and necessary software.

• Systems must be certified by the Technical Standards and Safety Authority (TSSA).

• Systems are non-proprietary and capable of controlling elevators regardless of manufacturer.

• Systems will utilize the same ECC Pixel Control HMI as a centralized access control unit.

• Systems are considered Information Technology (IT) and require adherence to DoD Instruction 8510.01 (Risk Management Framework - RMF) for cybersecurity authorization.

• The DPRI Program requires the construction of six (6) buildings in Guam, expected completion by the end of FY2031.

• Funding will consist of MAMIZU (Government of Japan funded projects) and Military Construction (MILCON).

• The anticipated cost to the Government for these supplies/services has been determined to be fair and reasonable.

• This is a justification for other than full and open competition, citing FAR 6.302-1 (Only one responsible source).

• A SAM.gov announcement was published on August 24, 2025, to identify other potential sources, closing on September 8, 2025, with no responses received.

• The government determined that using multiple manufacturers would result in substantial duplication of costs and diminish cybersecurity risk.

• This justification is for brand-name procurement, limiting competition to ECC products.

• The use of ECC systems is justified due to standardization, interoperability, reduced cybersecurity risk, and avoidance of substantial duplication of costs.

• Market research will be conducted for future projects to identify potential alternative sources.