LAN HVAC Replacement

Statement of Work (SOW) / Performance Work Statement (PWS)

To define the requirements for the removal of the existing air-cooled Leibert HVAC system and the installation of a new system with similar capacity and functionality in the Headquarters LAN room. The new system will integrate with the existing Carrier HVAC system.

• Furnish all labor, materials, equipment, and services for the HVAC system replacement.

• Provide and install one (1) Liebert PDX Air-Cooled System with remote condensing unit (or equivalent) meeting performance specifications.

• Provide and install a motorized damper system to allow switching of cooling air between the new Liebert unit and the existing Carrier HVAC system, integrated with the HVAC control system.

• Provide crane service for removal and installation.

• Remove and dispose of old equipment in compliance with EPA regulations and FAR Part 23.

• Provide and install all required refrigeration piping, ensuring compatibility with the selected refrigerant (R-410A or alternative compliant refrigerant).

• Reconnect new equipment to existing electrical infrastructure.

• Perform full startup and commissioning of new equipment.

• Log and provide operating temperatures and pressures.

• Cooling Capacity: 23 kw (or equivalent to PX023UA1A809KM model).

• Refrigerant Type: R-410A or compliant alternative.

• Energy Efficiency: Minimum EER of 10.0 or higher.

• Voltage: 460V, 3-phase, 60Hz.

• Operating Temperature Range: 65°F to 95°F ambient.

• Controls: Digital microprocessor-based control system with remote monitoring capability.

• Damper Control: Motorized damper integrated with HVAC control system.

• Compliance: Must meet ASHRAE standards and applicable federal energy efficiency requirements.

• Location: Headquarters LAN Room, 4191 N. Mesa St, El Paso, TX 79902.

• Warranty: Minimum 1-year parts and labor; 5-year compressor warranty. Extended warranty options are encouraged.

• Deliverables include the installed system, startup report, disposal documentation, and complete Operation & Maintenance (O&M) manuals (hard copy and digital).

• Proposal Submission Requirements: Technical proposal (including equipment specifications), cost proposal (with detailed breakdown), project schedule, and warranty information.

Other / Unclassified

This document is a sign-in sheet and contractor log for a site visit related to the FY261222006 – LAN HVAC Replacement opportunity. It records the names of visitors, their companies, dates, times of entry and exit, and the purpose of their visit (e.g., 'Bid', 'HVAC', 'Site Visit').

This document provides a record of companies and individuals who attended a site visit or expressed interest in the LAN HVAC Replacement opportunity. It can help potential bidders identify competitors or partners who have also shown interest in this requirement.

Forms / Attachments / Pricing Sheets

This document, "Applicable Terms and Conditions," outlines the clauses and provisions that are incorporated by reference into the contract. It serves to inform potential bidders of the legal and regulatory requirements that will govern the contract.

• Terms and Conditions: Specifies that the solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC-Circular 2025-06 (posted October 31, 2025).
• Clauses by Reference Text: Lists numerous FAR (Federal Acquisition Regulation) clauses that apply to the requirement, such as those related to personal identity verification, award management, representations and certifications, accelerated payments, protection of government property, contract terms and conditions for commercial services, and unenforceability of unauthorized obligations.
• FAR 52.252-2: States that the contract incorporates clauses by reference, and their full text is available upon request or electronically at https://www.acquisition.gov.
• Clauses by Full Text: Includes the full text of specific FAR clauses, notably FAR 52.212-5, "Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services," which itself incorporates numerous other FAR clauses related to statutes and executive orders.
• Extensive List of FAR Clauses: The document details a comprehensive list of FAR clauses, including those related to prohibitions on certain hardware/software, contracting for telecommunications services, inverted domestic corporations, protests, breach of contract, subcontractor sales, business ethics, whistleblower protections, reporting executive compensation, service contract reporting, protecting against debarred contractors, and various small business set-aside provisions (HUBZone, Total Small Business, Partial Small Business, Small Business Subcontracting Plan, Service-Disabled Veteran-Owned Small Business, Economically Disadvantaged Women-Owned Small Business, etc.). It also includes clauses related to labor standards, environmental considerations, privacy training, buy American provisions, trade agreements, and tax requirements.

This document is critical for bidders as it defines the legal framework and mandatory requirements of the contract. Bidders must review these clauses to understand their obligations, potential liabilities, and compliance requirements, which can significantly impact their ability to bid and perform the contract successfully. Particular attention should be paid to clauses related to small business participation, labor standards, and any specific prohibitions or representations required (e.g., telecommunications equipment).

Form / Attachment / Pricing Sheet

This document outlines the CLIN structure for the LAN HVAC Replacement project, detailing the "LAN HVAC Replacement - Installation Materials" CLIN.

• CLIN 001: LAN HVAC Replacement - Installation Materials
• Description: The contractor is to provide labor, materials, crane service, disposal, and supervision for LAN HVAC installation services. The primary goal is to remove the existing LAN HVAC unit and install a Liebert PDX (or equivalent) air-cooled system with a remote condensing unit. The installation location is specified as 4191 N. Mesa St, El Paso, TX 79902.
• Quantity: 1 (Lot/Lump Sum)
• Unit: LS (Lot/Lump Sum)
• Unit Price: Not specified
• Total Price: Not specified

This document provides essential details for CLIN 001, specifically the materials and scope of work related to the LAN HVAC replacement. Bidders should use this information to understand the required materials and services for this specific line item and to prepare their pricing and technical proposals accordingly.

Statement of Work (SOW)

To define the requirements for the removal of the existing air-cooled Leibert HVAC system and the installation of a new system of similar capacity and functionality in the Headquarters LAN room. The new system will integrate with the existing Carrier HVAC system via a damper for airflow control.

• Furnish all labor, materials, equipment, and services necessary to complete the work in accordance with federal, state, and local regulations.

• Provide and install one (1) Liebert PDX Air-Cooled System with remote condensing unit or equivalent.

• Provide and install a motorized damper system to allow switching of cooling air between the new Liebert unit and the existing Carrier HVAC system, integrated with the HVAC control system.

• Provide crane service for removal of existing equipment and installation of new equipment.

• Remove and dispose of old equipment in compliance with EPA regulations and FAR Part 23.

• Provide and install all required refrigeration piping, ensuring compatibility with the selected refrigerant (R-410A or alternative).

• Reconnect new equipment to existing electrical infrastructure.

• Perform full startup and commissioning of new equipment, logging operating temperatures and pressures.

• Cooling Capacity: 23 tons (or equivalent).

• Refrigerant Type: R-410A or compliant alternative.

• Energy Efficiency: Minimum EER of 10.0 or higher.

• Voltage: 460V, 3-phase, 60Hz.

• Operating Temperature Range: 65°F to 95°F ambient.

• Controls: Digital microprocessor-based control system with remote monitoring capability.

• Damper Control: Motorized damper integrated with HVAC control system.

• Compliance: Must meet ASHRAE standards and applicable federal energy efficiency requirements.

• Location: Headquarters LAN Room - 4191 N. Mesa St, El Paso, TX 79902.

• Minimum Warranty: 1-year parts and labor; 5-year compressor warranty. Extended warranty options are encouraged.

• Deliverables include the installed HVAC system and damper, startup report, disposal documentation, and Operation & Maintenance (O&M) manuals (hard copy and digital).

• Proposal Submission Requirements: Technical proposal (equipment specifications), cost proposal (detailed breakdown), project schedule, and warranty information.