SSTG Service

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, prepared in accordance with FAR Subpart 12.6 and FAR 13.5. It constitutes the only solicitation, and a written solicitation will not be issued. The RFQ number is N4215826Q0006. This is a competitive, unrestricted action for an urgent requirement with a narrow window of opportunity.

The core requirement is to accomplish the setting of an Overspeed Shut-Off Valve Spring. This involves:

• Adjusting the spring to close at 206 gallons per minute (+10/-0 GPM) with up to 1500 PSIG pressure using specified test medium (MIL-H-19457 or MIL-H-22072).

• Drilling a 3/16" diameter hole 1-1/2" deep in the locknut for a government-furnished roll pin and installing it.

• Providing a Certified Test Report confirming the valve meets the specified requirements, with signed certification.

• Draining the valve completely and blanking ports after adjustment.

• The contractor's facility will be the location of work.

• Contract type: Firm Fixed Price for all CLINs.

• Period of Performance: Estimated January 30, 2026 – February 6, 2026 (To Be Determined at Award).

• Delivery Location: Contractor's Facility.

• Estimated Value: NAICS code 811310 (Commercial and Industrial Machinery and Equipment) with a Small Business Standard of $12.5 million.

• Quotes must be submitted in two separate volumes: Volume I - Technical Specifications and Delivery, and Volume II - Price.

• The technical quote must not contain pricing information.

• Quotes must be submitted in writing to Rebekah Riggins at rebekah.r.riggins.civ@us.navy.mil by 1000 am EST on January 28, 2026.

• Evaluation will be based on a combination of factors: Technical Specifications, Delivery, and Price. Technical acceptance is considered more important than price.

• The Government intends to award without discussions.

• Quoters must be registered in the System for Award Management (SAM).

• This is an unrestricted action.

• Applicable clauses and provisions are incorporated by reference, including FAR and DFARS.

• Base access may require obtaining a Defense Biometric Identification System (DBIDS) credential.

• Government Furnished Material: 1 ea. Overspeed Shut-Off Valve.

• The announcement closes at 0800 on January 29, 2026.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, prepared in accordance with FAR Subpart 12.6 and Simplified Acquisition Procedures (FAR 13.5). It constitutes the only solicitation, and a written solicitation will not be issued. The RFQ number is N4215826Q0006. The procurement is for services related to the adjustment of an Overspeed Shut-Off Valve Spring, including testing, labor, fluids and disposal, spring adjustments, and shipping. The NAICS code is 811310 with a small business standard of $12.5 million. This is a competitive, unrestricted action and an urgent requirement with a narrow window of opportunity.

• Adjustment of Overspeed Shut-Off Valve Spring to close at 206 GPM minimum with up to 1500 PSIG pressure.

• Use of test medium MIL-H-19457 or MIL-H-22072.

• Drilling a 3/16" diameter hole in the locknut for a roll pin (government furnished material).

• Providing a Certified Test Report confirming the valve meets specified requirements.

• Draining the valve and blanking ports after adjustment.

• Packaging, crating, and shipping the valve to the vendor via fastest traceable means.

• Returning the valve to Norfolk Naval Shipyard (NNSY) via fastest traceable means.

• Contract type: Firm Fixed Price for each CLIN.

• Period of Performance: To be determined at award (estimated January 30, 2026 – February 6, 2026).

• Delivery Location: Contractor's Facility.

• Estimated Value: $12.5 million (Small Business Standard).

• Quotes are due by 1000 EST on January 28, 2026.

• Inquiries should be submitted in writing to Rebekah Riggins at rebekah.r.riggins.civ@us.navy.mil by 1000 EST on January 28, 2026.

• Quotes must be submitted in two separate volumes: Volume I - Technical Specifications and Delivery, and Volume II - Price.

• The technical quote shall not contain any reference to price.

• Evaluation will be based on a combination of factors: Technical Specifications, Delivery, and Price. Technical acceptance is more important than price.

• Award will be made to the responsible vendor whose offer is most advantageous to the Government.

• The Government may award without discussions.

• Quoters must be registered in the System for Award Management (SAM).

• This is a competitive, unrestricted action.

• This is an urgent requirement action.

• Procedures in FAR 13.106 are applicable.

• Contractors must obtain DBIDS credentials for base access if required.

• Applicable FAR and DFARS clauses are incorporated by reference.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, prepared in accordance with FAR Subpart 12.6 and FAR 13.5. It serves as the only solicitation, and written solicitations will not be issued. The RFQ number is N4215826Q0006. The solicitation incorporates provisions and clauses effective through Federal Acquisition Circular (October 1, 2025) and DFARS Change Notice (November 10, 2025).

• The primary objective is to accomplish the setting of an Overspeed Shut-Off Valve Spring.

• This includes testing material, testing labor, testing fluids and disposal, spring adjustments, and shipping.

• The contractor must provide all material and equipment necessary for the adjustment.

• The valve must reach 206 gallons per minute (GPM) minimum with up to 1500 PSIG of pressure, with an operational rated pressure differential of 600 PSID at a flow rate of 147 GPM.

• A 3/16" diameter hole must be drilled 1-1/2" deep in the locknut for a roll pin.

• The contractor must provide a Certified Test Report confirming the valve meets the specified requirements.

• The valve must be completely drained of fluid after spring adjustment, and ports blanked for cleanliness.

• Contract type: Firm Fixed Price for all CLINs.

• Period of Performance: January 14, 2026 through January 28, 2026.

• Delivery Location: Contractor's Facility.

• Inspection and Acceptance: Destination, performed by Government.

• Inquiries and correspondence should be submitted in writing to Rebekah Riggins at rebekah.r.riggins.civ@us.navy.mil by 1000 am EST on January 14, 2026. Responses to inquiries are not guaranteed.

• Quotes must be submitted in two separate volumes: Volume I - Technical Specifications and Delivery, and Volume II - Price.

• The technical quote must not contain any reference to price.

• The price quote must be submitted separately using the CLIN Structure.

• Vendors must certify that their product meets each capability listed in the SOW by initialing the provided certification statement.

• Evaluation will be based on technical specifications, delivery, and price. Technical acceptance is more important than price.

• The Government intends to award without discussions.

• The solicitation closes at 1000 on January 14, 2026.

• NAICS Code: 332919 – Other Metal Valve and Pipe Fitting Manufacturing.

• Small Business Standard: 750 employees.

• This is a competitive, Total Small Business set-aside action.

• Vendors must be registered in the System for Award Management (SAM) database.

• Quotes should include price(s), FOB point, point of contact, name and phone number, GSA contract number (if applicable), business size, and payment terms.

• Quotes over 10 pages will not be accepted by facsimile.

• Defense Biometric Identification System (DBIDS) requirements for base access are detailed in Section 6.