Replace Lighting for USCG in Demopolis, AL

Form / Attachment / Pricing Sheet

This document provides detailed specifications, ordering information, performance data, and dimensions for Atlas Flood Lights, specifically the Optic, Extra-Wide, and Extreme series. It serves as a technical data sheet and product catalog for potential buyers.

• Specifications: Details construction, optics, thermal management, listings (UL/cUL, DLC), AC input, driver type, and LED color temperatures.
• Ordering Information: Outlines product series (PFS, PFM, PFL2G, PFXL2G), distribution options (Wide, Extra-Wide, Extreme), color temperatures (3000K-5000K), output (lumens/wattage), controls (dimming, photocontrol), voltage, color, and mounting options.
• Performance Data: Provides lumen output, efficacy (LPW), and wattage for various configurations across different color temperatures and selectable/fixed options.
• Dimensions: Includes detailed drawings with measurements for each product series (PFS, PFM, PFL2G, PFXL2G) and mounting types (Knuckle, Trunnion, Predator Slipfitter).
• DLC Product Information: Lists DLC Product IDs and classifications for various fixed, lumen selectable, and fully selectable models.

This document is crucial for bidders to understand the technical capabilities, performance metrics, and physical characteristics of the flood light fixtures. It allows them to:

• Determine if the product specifications meet the requirements of a potential solicitation.
• Compare different configurations and select the most suitable option.
• Evaluate the performance data (lumens, efficacy) against project needs.
• Understand the physical dimensions and mounting options for installation planning.
• Verify DLC qualification, which may be a requirement for rebates or specific projects.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the solicitation.

• Licensed Electrician: While OSHA standards apply, the document does not explicitly state if a licensed electrician is required on-site at all times. Responses refer to OSHA for electrical work standards.
• Electrical Wiring Removal: The government requires all electrical runs from the pole base to the top to be removed. Electrical runs to floodlights can be secured and capped inside a 1/2" conduit run, with the remainder abandoned in place.
• Buy American Act Waiver: No waiver will be granted if a fixture compliant with the Buy American Act cannot be found.
• Contract Timeline (NTP): Regarding the 30-day timeframe for fixture submittal review, approval, and procurement, the government acknowledges the potential difficulty and states, "Do what you can, and we will try to work with you." This suggests flexibility but does not guarantee an extension or change to the Notice to Proceed (NTP) issuance.
• Floodlight Specifications: Replacement floodlights will be considered compliant if they meet or exceed the current lights' output of approximately 16,000 lumens and adequately illuminate the required area.

These clarifications provide specific details on electrical removal, fixture compliance, and timeline considerations, which may impact bidder proposals and procurement strategies. Bidders should ensure their proposed solutions and timelines account for these responses.

Form / Attachment / Pricing Sheet

This document specifies technical requirements for lighting fixtures and associated hardware for an unspecified opportunity. It details the types of lights, their specifications, and miscellaneous requirements for installation.

Small Sign Light:

• Model: Atlas PFMXW43LED
• Wattage: 43W LED
• Color Temperature: 4500K
• Voltage: 120V
• Mounting: ½” NPT Male

Pole Lights:

• Model: Atlas SLP16145LEDTF4KU
• Wattage: 145W LED
• Fixture Size: 16”
• Beam Type: Forward Throw
• Color Temperature: 4500K
• Voltage: 120V
• Lumens: 16,040

Miscellaneous Requirements:

• Pole Height: 20’ with square mounting at top
• Required Lumens: 16,000+
• Solar Autonomy: 2-5 nights
• Wind Load Resistance: 90-110 MPH

This attachment provides critical technical specifications for lighting components and installation requirements. Bidders must ensure their proposed solutions meet or exceed these detailed requirements, including specific fixture models, lumen output, color temperature, and environmental resistance (wind load, solar autonomy). This information is essential for accurate proposal development and ensuring compliance with the opportunity's technical scope.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide services for the removal of existing parking lot and pier lighting and the installation of new solar LED lighting at the U.S. Coast Guard Shore Side Detachment Demopolis.

• Removal of 12 existing LED parking lot and pier lights.

• Removal of unnecessary electrical wiring and components.

• Installation of 9 new solar LED streetlights and 3 new solar LED floodlights.

• Installation of necessary electrical components, mounting equipment, and hardware.

• Repair of remaining openings on light poles.

• Contractor to provide all necessary trim, hardware, caulk, and sealing materials.

• Contractor to perform function tests on new lights.

• Furnish labor, materials, and equipment for the replacement.

• New lights must meet minimum specifications to adequately illuminate the required area and meet or exceed the specifications of the lights being removed.

• Work must be completed within Thirty (30) calendar days after notice to proceed.

• A work schedule including all milestones must be submitted within seven (7) calendar days following contract award.

• Removal and application procedures for all building surfaces must be submitted.

• A written safety plan must be submitted within seven (7) calendar days following contract award.

• Period of Performance: Thirty (30) calendar days after notice to proceed.

• Location: U.S. Coast Guard Shore Side Detachment, 1900 Coast Guard Road, Demopolis, AL 36732.

• Mandatory site visit prior to submitting a quote.

• Adherence to all Federal, State, and local laws, including environmental protection and waste disposal regulations.

• Compliance with U.S. Army Corps of Engineers "Safety and Health Requirements Manual" (EM 385-1-1) and FAR 52.236-13 "Accident Prevention".

• Contractor is responsible for site safety and implementing a safety program.

• Personnel must have proper, laminated, photo identification.

• Contractor must coordinate with the Point of Contact (POC) to minimize interference with Coast Guard operations.

• Contractor use of premises must comply with installation regulations.

• Contractor is responsible for restoration of the laydown area to its original condition.

• Contractor must take precautions for extreme weather.

• Equipment and materials must be handled, stored, and protected properly.

• Contractor must be on hand to accept shipments; Government will not accept shipments.

• Contractor must keep the work area free from waste materials.

• Utility outages require at least two (2) working days' notice to the POC.

• All warranties and guarantees for equipment shall be endorsed to the Government.

• A written request to schedule final inspection must be submitted, allowing a minimum of two (2) weeks notice.

• MKC Zachary Mason, (251)214-5671, Zachary.S.Mason@uscg.mil

Solicitation / RFP / RFQ

This solicitation is for the removal of 12 LED parking lot and pier lights, removal of unnecessary electrical wiring or components, installation of 9 solar LED streetlights and 3 solar LED floodlights, installation of necessary electrical components or accessories, and mounting equipment. The work also includes repairing any remaining openings on light poles. The project is located in Demopolis, AL.

• Removal of existing LED parking lot and pier lights.

• Removal of unnecessary electrical wiring and components.

• Installation of 9 solar LED streetlights.

• Installation of 3 solar LED floodlights.

• Installation of necessary electrical components and accessories.

• Installation of necessary mounting equipment.

• Repair of openings on light poles.

• Work must be completed in accordance with the provided scope of work, which includes photos.

• This will be a firm-fixed priced purchase order.

• Award will be made to the lowest price technically acceptable offer.

• The period of performance is 14 calendar days for commencement after award and 30 calendar days for completion after receiving notice to proceed.

• Evaluation factors are: Price, Technical Acceptability, and Past Performance.

• Quotes must be submitted to Joel.S.Ivy@uscg.mil.

• Offerors are strongly encouraged to visit the facility for field measurements and evaluations prior to submitting a quote.

• This solicitation is set aside 100% for small business.

• All contractors must be actively registered in SAM.gov.

• Performance and payment bonds are not required.

• Offer guarantee is not required.

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for wage rates applicable to building construction projects in specific counties within Alabama. It serves as a reference for prevailing wages that must be paid on federal or federally assisted construction contracts.

• State: Alabama
• Counties: Choctaw, Conecuh, Dallas, Escambia, Greene, Marengo, Monroe, Perry, Sumter, Washington, and Wilcox.
• Construction Type: Building (excluding single-family homes or apartments up to 4 stories).
• Effective Date: January 2, 2026.
• Classifications and Rates: Lists specific trades (e.g., Boilermaker, Electrician, Plumber, Laborer) with their corresponding prevailing hourly wage rates and fringe benefits.
• Executive Order Notes: Includes information regarding Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage for Federal Contractors), outlining contractor obligations.
• Appeals Process: Details the procedure for appealing wage determination decisions.

Bidders must review these wage rates to accurately estimate labor costs for their proposals. Failure to comply with the specified prevailing wage rates can lead to contract violations. The document also highlights important worker protections and contractor obligations related to paid sick leave and minimum wage.

Other / Unclassified

This document contains sections related to construction contracts, including:

• Section C: Description/Specifications/Statement of Work
• Section D: Packaging and Marking
• Section E: Inspection and Acceptance
• Section F: Deliveries or Performance, incorporating FAR 52.211-10 (Commencement, Prosecution, and Completion of Work) and FAR 52.242-14 (Suspension of Work).
• Section G: Contract Administration Data, referencing invoicing instructions as an attachment.
• Section H: Special Contract Requirements
• Section I: Contract Clauses, listing numerous FAR and HSAR clauses incorporated by reference, many specific to construction contracts.
• Invoice Instructions detailing the use of the Invoice Processing Platform (IPP).

This document outlines the contractual terms, conditions, and clauses applicable to construction contracts. Bidders should review the listed FAR and HSAR clauses, particularly those in Section F and Section I, to understand the performance requirements, timelines, payment terms, and other legal obligations associated with the contract. The Invoice Instructions are critical for understanding how to submit payment requests upon award.